Mechanochemical reactions of fluorides with hemin

Hemin has two potential sites to react with fluorides, the peripheral acid groups and the central Fe^III cation. The mechanochemical reactions of hemin with fluorides (LiF, NaF, KF, CsF, NH₄F and AgF) were monitored using X-ray diffraction (XRD), and IR and Mössbauer spectroscopies. LiF and NaF were found inert when milled with hemin, however KF, CsF, NH₄F and AgF react at both hemin sites. At the iron site Cl⁻ is replaced by F⁻ with formation of KCl, CsCl, NH₄Cl, and AgCl, as detected by XRD, while with the peripheral acid groups, fluorides collect the acidic protons to form KHF₂, CsHF₂, NH₄HF and AgHF₂. The reactions of hemin with the reactive fluorides take place first at the iron site and then at the propionic acid groups.     

Zirconium(IV)-porphyrins as novel ionophores for fluoride-selective polymeric membrane electrodes

The feasibility of using Zr(IV)-porphyrins as novel ionophores for preparing anion-selective polymeric membrane electrodes is examined. Electrodes constructed using o-nitrophenyl octyl ether plasticized poly(vinyl chloride) membranes containing Zr(IV)-octaethylporphyrin (OEP) dichloride (Zr(IV)[OEP]Cl₂) or Zr(IV)-tetraphenylporphyrin (TPP) dichloride (Zr(IV)[TPP]Cl₂) were found to exhibit enhanced potentiometric selectivity toward fluoride compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). At pH 5.5, the electrodes displayed the following selectivity sequences: ClO₄⁻ > SCN⁻ > I⁻ > F⁻ > NO₃⁻ > Br⁻ > NO₂⁻ > Cl⁻ and F⁻ > ClO₄⁻ > SCN⁻ > I⁻ > NO₂⁻ > NO₃⁻ > Br⁻ > Cl⁻ for membranes doped with Zr(IV)[OEP]Cl₂) and Zr(IV)[TPP]Cl₂, respectively. Both ionophores are shown to operate via a charged carrier mechanism, with 10 mol% of lipophilic tetraphenylborate derivative in the membrane phase required to achieve optimal selectivity. Electrodes prepared with both metalloporphyrin species display super-Nernstian response toward fluoride with slopes typically greater than −100 mV per decade. It is shown, via UV-VIS spectroscopy of the membrane phase, that this behavior occurs due to spontaneous formation of hydroxide ion bridged porphyrin dimers in the membrane in the presence of the lipophilic anionic additive. The dimers are easily converted to monomeric species upon increasing the concentration of fluoride in the sample solution. Decreasing the pH of sample buffer background solution (from pH 5.5 to pH 3) decreases the lower detection limit (DL) of the electrode response toward fluoride (by two-order of magnitude) and improves the electrodes’ selectivity.     

Influence of the physico-chemical properties of Selangor soil series on the distribution coefficient (<Emphasis Type="Italic">K</Emphasis><Subscript>d</Subscript>-value) of <Superscript>226</Superscript>Ra

²²⁶Ra is a member of the ²³⁸U natural decay series and is one of the most important isotope to be determined among the naturally occurring nuclides in environmental samples. In order to evaluate the radiation dose from ²²⁶Ra, it is important to know its mobility in different types of soils. The aim of the present study is to quantify the influence of physico-chemical soil properties on ²²⁶Ra adsorption. The distribution coefficients (K _d-value) of ²²⁶Ra in Selangor soil series samples were measured in one core, at three depth levels to evaluate the adsorbability of ²²⁶Ra. The soil samples were spiked with ²²⁶Ra tracer and the activities of ²²⁶Ra in the separated phase from batch sorption test were measured by a low background but high efficiency well-type HPGe detector. Several physico-chemical soil properties were also characterised for each soil samples. Pearson’s correlation and stepwise multiple regression test were applied at the 0.05 level of significance throughout all analysis to determine the relationships and influences between distribution coefficients (K _d-value) of ²²⁶Ra with physicochemical soil properties for the Selangor soil series. The observed K _d value was in the range of 50.55–172.28 mL g⁻¹ (mean: 93.20 ± 46.99 mL g⁻¹). The regression showed that the highest positive correlations were observed for organic matter (OM) and cation exchange capacity (CEC) (r = 0.96**, 0.81**, respectively) with K _d-values. The results indicate that the stepwise multiple regression model incorporating the soil’s OM and CEC accounts for 98% of the variability in distribution coefficients of ²²⁶Ra.     

Thermal energy rate constants for the reactions NO2 + Cl2 → Cl2 + NO2, Cl2 + NO2 → Cl + NO2Cl,SH + NO2 → NO2 + SH,SH + Cl2 → Cl2 + SH,and S + NO2 → NO2 + S

It is found that charge-transfer on NO⁻₂ with Cl₂ is fast at thermal energy. The Cl⁻₂ ion reacts with NO₂ to produce Cl⁻ and NO₂Cl, and SH⁻ charge-transfers rapidly with both Cl₂ and NO₂. From the exothermicities implied it is deduced that EA (SH)<EA (NO₂)< EA (Cl₂) or EA (NO₂) = 2.38 ± 0.06 eV and EA (Cl₂ = 2.46 ± 0.14 eV.     

Colorimetric anion chemosensor based on 2-aminobenzimidazole: naked-eye detection of biologically important anions

We synthesized a novel colorimetric anion chemosensor bearing benzimidazole motifs as recognition sites in the pods of the receptor. The addition of tetrabutylammonium salts of F⁻ or AcO⁻ to the solution of receptor caused dramatic color changes from colorless to yellow, which was clearly visible to the naked eye. The receptor showed no significant changes on addition of other anions such as Cl⁻, Br⁻, I⁻, NO₃⁻, and H₂PO₄⁻.     

Adsorption of l-histidine on copper surface as evidenced by surface-enhanced Raman scattering spectroscopy

The adsorption of l-histidine on a copper electrode from H₂O- and D₂O-based solutions is studied by means of surface-enhanced Raman scattering (SERS) spectroscopy. Different adsorption states of histidine are observed depending upon pH, potential, and the presence of the SO²⁻₄ and Cl⁻ ions. In acidic solutions of pH 1.2 the imidazole ring of the adsorbed histidine remains protonated and is not involved in the chemical coordination with the surface. The SO²⁻₄ and Cl⁻ ions compete with histidine for the adsorption sites. In solutions of pH 3.1 three different adsorption states of histidine are observed depending on the potential. Histidine adsorbs with the protonated imidazole ring oriented mainly perpendicularly to the surface at potentials more positive than −0.2 V. Transformation of that adsorption state occurs at more negative potentials. As this takes place, histidine adsorbs through the α-NH₂ group and the neutral imidazole ring. The Cl⁻ ions cause the protonation and detachment of the α-NH₂ group from the surface and the formation of the ion pair NH⁺₃ … Cl⁻ can be observed. In the neutral solution of pH 7.0 histidine adsorbs through the deprotonated nitrogen atom of the imidazole ring and the α-COO⁻ group at E ≥ −0.2 V. However, this adsorption state is transformed into the adsorption state in which the α-NH₂ group and/or neutral imidazole ring participate in the anchoring of histidine to the surface, once the potential becomes more negative. In alkaline solutions of pH 11.9 histidine is adsorbed on the copper surface through the neutral imidazole ring.     

Ionic liquids monolithic columns for protein separation in capillary electrochromatography

A series of ionic liquids (ILs) monolithic capillary columns based on 1-vinyl-3-octylimidazolium (ViOcIm⁺) were prepared by two approaches (“one-pot” approach and “anion-exchange” approach). The effects of different anions (bromide, Br⁻; tetrafluoroborate, BF₄⁻; hexafluorophosphate, PF₆⁻; and bis-trifluoromethanesulfonylimide, NTf₂⁻) on chromatography performance of all the resulting columns were investigated systematically under capillary electrochromatography (CEC) mode. The results indicated that all these columns could generate a stable reversed electroosmotic flow (EOF) over a wide pH range from 2.0 to 12.0. For the columns prepared by “one-pot” approach, the EOF decreased in the order of ViOcIm⁺Br⁻ > ViOcIm⁺BF₄⁻ > ViOcIm⁺PF₆⁻ > ViOcIm⁺NTf₂⁻ under the same CEC conditions; the ViOcIm⁺Br⁻ based column exhibited highest column efficiencies for the test small molecules; the ViOcIm⁺NTf₂⁻ based column possessed the strongest retention for aromatic hydrocarbons; and baseline separation of four standard proteins was achieved on ViOcIm⁺NTf₂⁻ based column corresponding to the highest column efficiency of 479 000 N m⁻¹ for cytochrome c (Cyt c). These results indicated that the property of ILs based columns could be tuned successfully by changing anions, which gave these columns potential to separate both small molecules and macro biomolecules.     

Supported imidazolium ionic liquid phases: A new material for solid-phase extraction

This study reports a material that is based on the concept of ionic liquid analogue: a slightly crosslinked polymer-supported imidazolium trifluoroacetate salt (IL-CF₃COO⁻) that favorably combines the properties of ionic liquids (ILs) and the advantages of a solid support.The ionic liquid-supported material was evaluated for the first time as a solid-phase extraction (SPE) sorbent for selectively and quantitatively extracting pharmaceuticals from aqueous samples.The novel IL-CF₃COO⁻ was evaluated under reversed-phase (RP), weak anion exchange (WAX), strong anion exchange (SAX) and strong cation exchange (SCX) SPE procedures, and we found that SAX conditions are the most suitable for investigating the behaviour of the IL-CF₃COO⁻ material. Under SAX conditions, the IL-CF₃COO⁻ material was capable of selectively and quantitatively extracting a group of acidic compounds from aqueous samples, while washing basic analytes that were also present in the sample.The SPE method using IL-CF₃COO⁻ material was used to analyse 1000 ml of different aqueous samples (ultrapure, tap and river) with complete recovery of the acidic compounds studied. Moreover, the method provided clean chromatogram and high recoveries when percolating complex real samples, such as 1000 ml of river water and 250 ml of effluent wastewater from a sewage treatment plant spiked at low levels with the analytes studied.     

Role of counteranions in polymeric ionic liquid-based solid-phase microextraction coatings for the selective extraction of polar compounds

A polymeric ionic liquid (PIL) poly(1-vinyl-3-hexylimidazolium chloride) (poly(ViHIm⁺Cl⁻)) was designed as a coating material for solid phase microextraction (SPME) to extract polar compounds including volatile fatty acids (VFAs) and alcohols. The extracted analytes were analyzed by using gas chromatography (GC) coupled with flame ionization detection (FID). Extraction parameters of the HS–SPME–GC–FID method, such as ionic strength, extraction temperature, pH and extraction time were optimized. Calibration studies were carried out under the optimized conditions to further evaluate the performance of the PIL-based SPME coating. For comparison purposes, the PIL poly(1-vinyl-3-hexylimidazolium bis[(trifluoromethyl)sulfonyl]imide) (poly(ViHIm⁺NTf₂⁻)) was also used as the SPME coating to extract the same analytes. The results showed that the poly(ViHIm⁺Cl⁻) PIL coating had higher selectivity towards more polar analytes due to the presence of the Cl⁻ anion which provides higher hydrogen bond basicity than the NTf₂⁻ anion. The limits of detection (LODs) determined by the designed poly(ViHIm⁺Cl⁻) PIL coating ranged from 0.02 μg L⁻¹ for octanoic acid and decanoic acid and 7.5 μg L⁻¹ for 2-nitrophenol, with precision values (as relative standard deviation) lower than 14%. The observed performance of the poly(ViHIm⁺Cl⁻) PIL coating was comparable to previously reported work in which commercial or novel materials were used as SPME coatings. The selectivity of the developed PIL coatings was also evaluated using heptane as the matrix solvent. This work demonstrates that the selectivity of PIL-based SPME coatings can be simply tuned by incorporating different counteranions to the sorbent coating.     

Anion recognition by 2,2′-binaphthalene derivatives bearing urea and thiourea groups at 8- and 8′-positions by UV-vis and fluorescence spectroscopies

Synthesis and anion recognition properties of 2,2′-binaphthalene derivatives bearing two thiourea (1) and urea (2) groups at 8- and 8′-positions were studied. The structure of receptor 1 was determined by X-ray crystallography. UV-vis spectra of the receptors showed characteristic changes around 300-400 nm through isosbestic points upon the addition of biologically relevant anions such as acetate, dihydrogenphosphate, and chloride in MeCN and DMSO due to restriction of the rotation around the single bond connecting two naphthyl moieties by cooperative guest binding of two recognition sites. Job’s plots showed 1:1 complexation for guest anions. The fluorescence quantum yields of free form of 1 and 2 in MeCN were determined to be 0.021 and 0.57, respectively. The fluorescence intensities of the receptors diminished upon the addition of anions in MeCN. The association constants of receptors 1 and 2 were one or two orders of magnitude greater than the corresponding monothiourea and urea receptors 3 and 4 indicating cooperative hydrogen bonding with guest anions. The selectivity trends of association of anions were F⁻>AcO⁻>H₂PO₄⁻>Cl⁻>>HSO₄⁻≈NO₃⁻≈Br⁻≈I⁻ for 1, and F⁻>AcO⁻≈Cl⁻>H₂PO₄⁻>Br⁻>HSO₄⁻>I⁻≈NO₃⁻ for 2. Receptor 2 showed remarkable Cl⁻ selectivity presumably owing to suitable orientation for effective hydrogen bond formation with Cl⁻.     

Determination of fluoroquinolone antibiotics in environmental water samples based on magnetic molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry

A simple method based on magnetic separation for selective extraction of fluoroquinolones (FQs) from environmental water samples has been developed using magnetic molecularly imprinted polymer (MMIP) as sorbent. The MMIP has been prepared using ciprofloxacin as template molecule, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linking agent and Fe₃O₄ magnetite as magnetic component. The polymer has been characterized by scanning electron microscopy, Fourier-transform infrared spectrometry and vibrating sample magnetometry. Various parameters affecting the extraction efficiency were evaluated in order to achieve optimal concentration and reduce non-specific interactions. The analytes desorbed from the polymers were determined by liquid chromatography-tandem mass spectrometry. The matrix effect was evaluated by using different washing solvents for removing interfering compounds from the MMIPs after sample loading. Under the optimal conditions, the linearity of the method obtained is in the range of 20-2000 ng L⁻¹. The detection limits of FQs are in the range of 3.2-6.2 ng L⁻¹. The relative standard deviations of intra- and inter-day tests ranging from 2.5 to 7.2% and from 3.6 to 9.1% are obtained. In all three spiked levels (20, 100 and 200 ng L⁻¹), the recoveries of FQs are in the range of 76.3-94.2%. The proposed method was successfully applied to determine FQs including ciprofloxacin, enrofloxacin, lomefloxacin, levofloxacin, fleroxacin and sparfloxacin in different water samples, such as lake water, river water, primary and final sewage effluent. Ciprofloxacin and fleroxacin were found in primary and final sewage effluent samples with the contents in the range of 26-87 ng L⁻¹.     

Ba3Li2V2O7Cl4, a new vanadate with a channel structure

The tribarium dilithium divanadate tetrachloride Ba₃Li₂V₂O₇Cl₄ is a new vanadate with a channel structure and the first known vanadate containing both Ba and Li atoms. The structure contains four non‐equivalent Ba²⁺ sites (two with m and two with 2/m site symmetry), two Li⁺ sites, two nonmagnetic V⁵⁺ sites, five O²⁻ sites (three with m site symmetry) and four Cl⁻ sites (m site symmetry). One type of Li atom lies in LiO₄ tetrahedra (m site symmetry) and shares corners with VO₄ tetrahedra to form eight‐tetrahedron Li₃V₅O₂₄ rings and six‐tetrahedron Li₂V₄O₁₈ rings; these rings are linked within porous layers parallel to the ab plane and contain Ba²⁺ and Cl⁻ ions. The other Li atoms are located on inversion centres and form isolated chains of face‐sharing LiCl₆ octahedra.     

Thiourea-isothiouronium conjugate for strong and selective binding of very hydrophilic H2PO4 anion at the 1,2-dichloroethane-water interface

Potential use of a surfactant-like receptor is demonstrated at the 1,2-dichloroethane-water interface for strong and selective binding of H₂PO₄⁻ over Br⁻ and Cl⁻. The analysis by interfacial tensiometry reveals that the interfacial adsorption of a thiourea-isothiouronium conjugate, BT-C₁, is significantly stabilized by the binding of H₂PO₄⁻ with the adsorption constant of 1.7 × 10⁵ M⁻¹ while the interfacial adsorptivity of this receptor is relatively moderate for Br⁻ (0.81 × 10⁵ M⁻¹) and Cl⁻ (0.63 × 10⁵ M⁻¹). Such complexation-induced interfacial adsorption behaviors of BT-C₁ are discussed as a basis for the development of receptor-based chemical sensors for phosphate anions.     

Effects of chloride ions on electrochemical reactions of manganese(III) complexes

Electrochemical reactions of manganese(III) complexes, Mn^III(L)X (L; salen, salpn, 5-NO₂–salen or 5-NO₂–salpn, X; Cl, Br or NO₂) and Mn^III(L’)₂X (L’; N-Bu-sal, N-Oct–sal, N-Oct–5-Br–sal or N-Oct–5-NO₂–sal, X; Cl or Br), were investigated by voltammetry at a glassy carbon electrode in the absence/presence of Cl⁻ in acetonitrile solution. By the addition of Cl⁻, oxidation processes of Mn^III(L)X and Mn^III(L’)₂X have been found to be improved from quasi-reversible to reversible, and their oxidation products, [Mn^IV(L)X]⁺ and [Mn^IV(L’)₂X]⁺, were stabilized by the combination with Cl⁻ resulting in [Mn^IV(L)Cl₂] and [Mn^IV(L’)₂Cl₂], respectively. On the other hand, the reduction processes of Mn^III(L)X and Mn^III(L’)₂Cl were not so significantly affected by Cl⁻ as those observed for their oxidation. Other types of manganese(III) complexes and iron(III) complex were also investigated. The present study may clarify the role of Cl⁻ being involved in OEC (oxygen-evolving center) in photosystem II.     

Ionic liquid of [Bmim]Cl for the preparation of hierarchical nanostructured rutile titania

The rutile titania with hierarchical nanostructure was conveniently prepared in a room temperature ionic liquid (RTIL) of [Bmim]⁺Cl⁻ system. The obtained materials were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption-desorption analysis. XRD patterns revealed that only rutile phase was formed in the ionic liquid of [Bmim]⁺Cl⁻. The SEM and TEM micrographs as well as N₂ adsorption-desorption measurements showed that the nanorods of rutile titania were interaggregated to fabricate a large mesoporous structure and the voids packed in the nanorods formed a small mesostructure. It was proposed that the formation of rutile crystal phase was due to high acidity and high Cl⁻ content in the special reaction media, and also the combination of ionic liquid-templated effects with so-called reaction limited aggregation resulted in the hierarchical nanostructure.     

Multivariate statistical study of simultaneously monitored cloud water, aerosol and rainwater data from different elevation levels in an Alpine valley (Achenkirch, Tyrol, Austria)

The present paper deals with data interpretation of monitoring of various atmospheric events (cloud water, aerosol and rainwater) at three different elevation levels at Achenkirch profile in an Alpine valley, Tyrol, Austria (Christlumkopf-1758 m, Christlumalm-1280 m and Talboden-930 m a.s.l.) by the use of principal components analysis. From October 1995 to September 1996 sampling sessions for all sites from the profile and for all events were performed for the major ions NH₄⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, NO₃⁻, SO₄²⁻-44 cases with eight variables for rainwater; 117 cases with eight variables for cloud water samples and 50 cases with seven variables for aerosol (the major ions as in rain- and cloud water but without magnesium) at any of the elevations. The aim of the multivariate statistical treatment was to extract information about latent factors determining the data structure in all of the cases in order to compare and interpret similarities and dissimilarities with respect to the elevation or the type of the atmospheric event. Four latent factors seem to explain over 85% of the total variance for almost all sites and events but the factors have different identification for the different events or sites (e.g. ‘anthropogenic’, ‘crustal’, ‘neutralization’, ‘salt’). Thus, a comparison between sites and between events becomes possible. It was found that cloud water and aerosol events are much more similar with respect to data structure (relevant to emission sources or processes of formation) than the same events and rainwater. Further, the upper sites of the profile (Christlumkopf and Christlumalm) also reveal data structure similarity differing from that of the lowest site Talboden.     

Syntheses, crystal structures and optical properties of the first strontium selenium(IV) and tellurium(IV) oxychlorides: Sr3(SeO3)(Se2O5)Cl2 and Sr4(Te3O8)Cl4

Two new quaternary strontium selenium(IV) and tellurium(IV) oxychlorides, namely, Sr₃(SeO₃)(Se₂O₅)Cl₂ and Sr₄(Te₃O₈)Cl₄, have been prepared by solid-state reaction. Sr₃(SeO₃)(Se₂O₅)Cl₂ features a three-dimensional (3D) network structure constructed from strontium(II) interconnected by Cl⁻, SeO₃²⁻ as well as Se₂O₅²⁻ anions. The structure of Sr₄(Te₃O₈)Cl₄ features a 3D network in which the strontium tellurium oxide slabs are interconnected by bridging Cl⁻ anions. The diffuse reflectance spectrum measurements and results of the electronic band structure calculations indicate that both compounds are wide band-gap semiconductors.     

Speciation of chromium in waste water using ion chromatography inductively coupled plasma mass spectrometry

Ion chromatography (IC) coupled with inductively coupled plasma mass spectrometry (ICP-MS) was systematically investigated for determining the speciation of chromium in environmental samples. Firstly, the stability of complexes formed by Cr(III) with various aminopolycarboxylic acids was studied by electrospray ionization mass spectrometry (ESI-MS). The results showed that [Cr(EDTA)]⁻ was stable in solution. Secondly, various mobile phases were examined to separate Cl⁻ from chromium species by IC to avoid Cl⁻ interference. The separation of [Cr(EDTA)]⁻ and Cr(VI) was achieved on a new anion-exchange column (G3154A/102) using a mobile phase containing 20 mM NH₄NO₃ and 10 mM NH₄H₂PO₄ at pH 7.0 without Cl⁻ interference. Detection limits for chromium species were below 0.2 μg/L with a direct injection of sample and without prior removal of interferences from the matrix. Finally, the proposed method was used for the determination of chromium species in contaminated waters.     

Enantiomer separation of rac-2,2′-dihydroxy-1,1′-binaphthyl (BNO) by inclusion complexation with racemic or achiral ammonium salts and a novel transformation of a 1:1:1 racemic complex of BNO, Me4N·Cl and MeOH into a conglomerate complex in the solid state

The complete simultaneous and mutual enantiomer resolution of 2,2′-dihydroxy-1,1′-binaphthyl (BNO) and N-(3-chloro-2-hydroxypropyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH(OH)CH₂Cl·Cl⁻ into their enantiomers by inclusion complexation between their racemates in EtOH in the presence of a chiral seed crystal is reported. The enantiomer resolution of the rac-BNO was also accomplished easily by inclusion complexation with achiral ammonium salts, N-(2-hydroxyethyl)-N,N,N-trimethylammonium chloride, Me₃N⁺CH₂CH₂OH·Cl⁻ and tetramethylammonium chloride, Me₄N⁺·Cl⁻. Inclusion complexation of the rac-BNO with Me₃N⁺ CH₂CH₂OH·Cl⁻ gave only a 1:1 conglomerate inclusion complex but not a racemic complex. Recrystallization of the rac-BNO and an equimolar amount of Me₄N⁺·Cl⁻ from MeOH (7 ml) and MeOH (15 ml) gave a 1:1:1 racemic complex, BNO·Me₄N⁺·Cl⁻·MeOH and a 1:1 conglomerate complex, BNO·Me₄N⁺·Cl⁻, respectively. Novel transformation of the former racemate into the latter conglomerate occurred by heating or by exposure to MeOH vapor in the solid state.     

Study of Dome C site (East Antartica) variability by comparing chemical stratigraphies

This paper compares chemical stratigraphies from snowpits collected at Dome C (East Antarctica) in order to assess site variability in terms of spatial distribution of chemical markers, annual accumulation rate and chemical species persistence in the snow layers. Since Dome C was chosen for deep drilling down to the bedrock in the framework of EPICA (European Project for Ice Coring in Antarctica), to provide 800 kyr of climatic and environmental records, evaluating site variability is fundamental for a reliable interpretation of the deep ice core stratigraphies.For this purpose, 4 snowpits were dug at Dome C (1997/98, 1998/99, 2000/01 and 2005/06 Antarctic Campaigns) and analysed for cations, inorganic anions and methane sulphonate by ion chromatography. Unlike the first three snowpits, the most recent one was analysed directly in situ, allowing to observe that no chemical contamination or loss due to sample storage and transport to Europe occurs for such a sampling.Accumulation rate variability was revealed to be around 4% in a common time range (1992-1964) for all snowpits. Intra-snowpit chemical variability was definitely higher than inter-snowpit variability, indicating that the variations observed in the chemical stratigraphies from Dome C can be reliably related to effective changes in source and transport mechanisms of the investigated markers more than to site variability.Post-depositional phenomena affecting chloride, nitrate and methane sulphonate were studied, revealing a logarithmic decay as a function of depth for Cl⁻ and MSA and an exponential one for NO₃⁻. The relative losses were quantified in the 75-80% range for Cl⁻, 66-83% for MSA and 89-94% for NO₃⁻ and were found to stop around 320, 320 and 60-80 cm depth, respectively.