Separation of thorium by anion-exchange chromatography in malic acid media

Summary Systematic studies on the anion-exchange behaviour of thorium in malic acid solution on Amberlite IRA-401 have been carried out. Acids such as HNO₃, HCl, H₂SO₄, HClO₄ and salts such as NH₄Cl, (NH₄)₂SO₄, NaClO₄, NaCl and NaNO₃ have been tested as eluants for thorium, their efficiency being evaluated in terms of their distribution coefficients. HNO₃ is the best eluent for thorium. Methods have been developed for the separation of thorium from several elements in malic acid media using selective adsorption or selective elution. The proposed method is applied to the analysis of thorium in monazite where HClO₄ is a better eluant than HNO₃. The method is simple and the accuracy about ±3%.     

Impact of multiple re-use of anion-exchange chromatography media on virus removal

We evaluated viral clearance in multiply-cycled anion-exchange media run in flow-through mode. We found that anion-exchange columns do not lose viral clearance capacity after extensive re-use, if they are cleaned with recommended buffers that do not chemically degrade the media. In contrast, anion-exchange (AEX) columns that are not cleaned or are cleaned with buffers that chemically degrade the media lost viral clearance capacity after extended use. In these cases, other performance attributes that changed at the same time were increased band spreading, decreased DNA clearance and accumulating backpressure that prevented re-use past 80-120 cycles. Thus, our data suggests that flow through mode anion-exchange columns that are cleaned with recommended cleaning buffers, and periodically monitored for band spreading, DNA clearance and/or backpressure need not be re-evaluated for viral clearance at the end of the validated media lifetime.     

Analysis of volatile fatty acids by gas chromatography separation of benzyl esters

Volatile fatty acids in aqueous media were esterfied in situ with phenyldiazomethane (PDM). Complete esterification was achieved in 3 h at 40°C under continuous stirring of an ether/water system. The process involved immediate transfer of benzyl esters into the organic phase. The separation of benzyl esters mixtures was carried out in glass capillary GC columns. The retention data and FID molar responses were determined for C1 to C6 acid benzyl esters, including 2-methylpropionic, 3-methylbutyric, 2-methylvaleric, and 2-ethylbutyric acid. An unusual relationship was observed between benzyl ester relative molar responses and carbon atom number.     

Highly sensitive determination of ectoine and other compatible solutes by anion-exchange chromatography and pulsed amperometric detection

In saline media prokaryotes compensate for the osmotic pressure of the surrounding medium by producing osmolytes. Although these osmolytes or osmoprotectors have quite diverse structures, most of them can be determined by anion-exchange chromatography combined with integrated pulsed amperometric detection. This technique offers the advantages of very high sensitivity and new opportunities to determine ectoine and 5-hydroxyectoine—two important osmolytes —after hydrolytic cleavage of the pyrimidine ring. It can even be used to screen bacterial colonies on agar for compatible solutes. Furthermore, it allows amino acids and osmolytes of this type to be determined without derivatization. To test the method we applied it to two halotolerant bacterial strains: Stenotrophomonas rhizophila DSM 14405^T and Halomonas elongata DSM 2581^T. The first strain produced trehalose and glucosylglycerol, and the second ectoine, as the main osmotic counterweight. The relationship between the content of these osmolytes in the bacterial biomass and the external salinity is described.     

Determination of petroleum sulfonates in crude oil by column-switching anion-exchange chromatography

A column-switching anion-exchange chromatography method was described for the separation and determination of petroleum monosulfonates （PMS） and petroleum disulfonates （PDS） in crude oil that was simply diluted with the dichloromethane/methanol （60/40）. The high performance liquid chromatography （HPLC） system consisted of a clean-up column and an analytical column, which were connected with two six-port switching valves. Detection of petroleum sulfonates was available and repeatable. This method has been successfully applied to determine PMS and PDS in crude oil samples from Shengli oil field.     

Separation of isotopic compounds by reversed-phase liquid chromatography. Effect of pressure gradient on isotope separation by ionization control

Isotope separation utilizing ionization control in reversed-phase liquid chromatography was studied. Several organic acids and bases labeled with oxygen-18 and nitrogen-15 were successfully separated from unlabeled compounds by using either 6-m microbore columns or recycle chromatography with short columns of conventional size. Differences in the separation factors for the same isotopic mixtures were observed between the two chromatographic systems, and attributed to the difference in the pressure gradient along the columns in the two systems. The steep pressure gradient existing in the short recycle columns resulted in an increase in the peak width and the separation factor for oxygen isotopic compounds, and a decrease in the peak width and the separation factor for nitrogen isotopic compounds.     

Analysis of carbohydrates in plants by high-performance anion-exchange chromatography coupled with electrospray mass spectrometry

A mass spectrometer was coupled to high-performance anion-exchange chromatography (HPAEC) with the help of electrochemical neutralization of the eluent and post-column addition of lithium chloride for carbohydrate analysis. Parallel selective channels (single ion monitoring) were used to decrease the detection limits and separate unresolved peaks. The mass specific detection allowed the simultaneous analysis of a wide range of sugar alcohols, mono-, di- and oligosaccharides. Carbohydrates extracted from leaves of poplar submitted to drought stress were analyzed using pulsed amperometric detection (PAD), then mass spectrometry. It allowed the confirmation of peak attribution and the identification of salicin as a major compound in the extracts. Different responses to water deficit and re-hydration were obtained for several carbohydrates, suggesting different roles in osmoprotection processes.     

Determination of chlorine and bromine in rocks by alkaline fusion with ion chromatography detection

This study describes the use of alkaline fusion by sodium peroxide to dissolve chlorine and bromine in rocks to produce a solution which, with appropriate pre-treatment, is suitable for analysis by ion chromatography. Results are given for a selection of sedimentary and igneous rocks. The accuracy of the fusion method is evaluated by analysis of Geological Survey of Japan reference materials. Additionally, a spike recovery test is performed to show that the fusion process is quantitative for chlorine and bromine. The results for chlorine are in the range 58–3860 mg kg⁻¹ and show good agreement both with results obtained by pyrohydrolysis with flow injection colorimetric detection and results obtained by aqueous leaching of the samples with ion chromatography detection. Results for bromine are in the range <3–4.5 mg kg⁻¹. Because of the relatively few data obtained in this study and the relative paucity of published data for reference materials, an assessment of the accuracy of the fusion method for bromine is more difficult. The limits of detection for this method are 36 and 3 mg kg⁻¹ for chlorine and bromine, respectively.     

Determination of U isotope ratios in sediments using ICP-QMS after sample cleanup with anion-exchange and extraction chromatography

The determination of uranium is important for environmental radioactivity monitoring, which investigates the releases of uranium from nuclear facilities and of naturally occurring radioactive materials by the coal, oil, natural gas, mineral, ore refining and phosphate fertilizer industries, and it is also important for studies on the biogeochemical behavior of uranium in the environment. In this paper, we describe a quadrupole ICP-MS (ICP-QMS)-based analytical procedure for the accurate determination of U isotope ratios (²³⁵U/²³⁸U atom ratio and ²³⁴U/²³⁸U activity ratio) in sediment samples. A two-stage sample cleanup using anion-exchange and TEVA extraction chromatography was employed in order to obtain accurate and precise ²³⁴U/²³⁸U activity ratios. The factors that affect the accuracy and precision of U isotope ratio analysis, such as detector dead time, abundance sensitivity, dwell time and mass bias were carefully evaluated and corrected. With natural U, a precision lower than 0.5% R.S.D. for ²³⁵U/²³⁸U atom ratio and lower than 2.0% R.S.D. for ²³⁴U/²³⁸U activity ratio was obtained with less than 90 ng uranium. The developed analytical method was validated using an ocean sediment reference material and applied to an investigation into the uranium isotopic compositions in a sediment core in a brackish lake in the vicinity of U-related nuclear facilities in Japan.     

Group separation of non-sulphated and 3-sulphated bile acids by disposable anion-exchange cartridges

Summary A rapid and simple method has been developed for the group fractionation of the major unsulphated and mono-sulphated bile acids in human body fluids. After extraction with Bond Elut C₁₈ cartridges, the bile acids are separated into the unconjugated, glycine-, taurine- and sulphate-conjugated forms on pre-packed Bond Elut SAX columns by increasing the ionic strength of the methanol-acetate buffer eluent. The procedure was found to be accurate and reproducible and to give complete resolution between the different groups. The levels of 3-sulphate bile acids in human serum and urine from patients with liver disease were determined by high-performance liquid chromatography, after group separation and solvolysis of the sulphate fraction.     

Determination of saccharides by high performance anion-exchange chromatography with pulsed amperometric detection

Summary High performance anion-exchange chromatography (HPAC) coupled with pulsed amperometric detection (PAD) under alkaline conditions (pH 13) separates neutral saccharides based upon their molecular size, saccharide composition, and glycosidic linkages. Carbohydrates were detected by oxidation with a gold-working electrode. HPAC-PAD was compared to high performance liquid chromatography (HPLC) with refractive index (RI) detection in terms of selectivity and sensitivity of saccharides. The results indicate that HPAC-PAD was more precise, two orders of magnitude more sensitive (pmol range) and gives better resolution of saccharides than HPLC-RI. HPAC-PAD required less sample preparation and was not subjected to matrix interferences. The use of HPAC-PAD was applied to the analysis of organic materials (plant residues, animal wastes and sewage sludge) and soil.     

Improvement of separation efficiencies of anion-exchange chromatography using monolithic silica capillary columns modified with polyacrylates and polymethacrylates containing tertiary amino or quaternary ammonium groups

Anion-exchange (AEX) columns were prepared by on-column polymerization of acrylates and methacrylates containing tertiary amino or quaternary ammonium groups on monolithic silica in a fused silica capillary modified with anchor groups. The columns provided a plate height (H) of less than 10 μm at optimum linear velocity (u) with keeping their high permeability (K = 9–12 × 10⁻¹⁴ m²). Among seven kinds of AEX columns, a monolithic silica column modified with poly(2-hydroxy-3-(4-methylpiperazin-1-yl)propyl methacrylates) (HMPMA) showed larger retentions and better selectivities for nucleotides and inorganic anions than the others. The HMPMA column of 410 mm length produced 42 000–55 000 theoretical plates (N) at a linear velocity of 0.97 mm/s with a backpressure of 3.8 MPa. The same column could be employed for a fast separation of inorganic anions in 1.8 min at a linear velocity of 5.3 mm/s with a backpressure of 20 MPa. In terms of van Deemter plot and separation impedance, the HMPMA column showed higher performance than a conventional particle-packed AEX column. The HMPMA column showed good recovery of a protein, trypsin inhibitor, and it was applied to the separation of proteins and tryptic digest of bovine serum albumin (BSA) in a gradient elution, to provide better separation compared to a conventional particle-packed AEX column.     

Sensitive high-performance anion-exchange chromatographic determination of paeoniflorin and albiflorin by pulsed amperometric detection after solid-phase extraction

We developed a method to simultaneously determine paeoniflorin and albiflorin levels using high-performance anion-exchange liquid chromatography with pulsed amperometric detection (HPAEC-PAD). The main principle of our method includes solid-phase extraction step using Amberlite XAD-2 sorbent to remove sugars and to selectively determine glycosides by PAD. Under these conditions, the linear dynamic range was 0.01–100 μg/mL, and the albiflorin and paeoniflorin detection limits (S/N = 3) were 5 and 10 pg, respectively. The intra- and inter-day precisions (RSDs) were <5.07%, and the average recoveries from Paeoniae Radix and Si-ni-san ranged from 97.12 to 101.15%. Our method showed high selectivity, high sensitivity, and good repeatability for analyzing albiflorin and paeoniflorin in oriental medicinal preparation.     

Precise determination of dissolved silica in seawater by ion-exclusion chromatography isotope dilution inductively coupled plasma mass spectrometry

Ion exclusion chromatograph (IEC) isotope dilution (ID) inductively coupled plasma mass spectrometry (ICP–MS) (IEC–ID–ICP–MS) was developed for measurement of dissolved silica in seawater, which was applied to production of certified reference materials (CRMs) of three concentration levels of nutrients (high, medium and low levels). IEC–ICP–MS has been employed to separate dissolved silica from seawater matrix. In the present study, in order to solve substantial problems due to spectral interference in ICP–MS and to improve the accuracy of IEC–ICP–MS beyond standard addition or conventional calibration methods, ID method was coupled with ICP-sector field mass spectrometry (operated under medium resolution,i.e., m/Δm = 4000). In addition, effects of various operating parameters in ICP–MS on a silicon background level were also investigated to obtain lower background equivalent concentration (BEC). As a result, 3 ng g⁻¹ of the BEC and 0.5 % of relative standard uncertainties were achieved in the analyses of dissolved silica in seawater samples at concentration levels from 4.0 mg kg ^-1 to 0.8 mg kg⁻¹ as silicon. The developed method was successfully validated by analyses of an artificial seawater containing a known amount of silicate and the seawater certified reference material MOOS-2 produced by the National Research Council Canada.     

Determination of mono- and disaccharides in milk and milk products by high-performance anion-exchange chromatography with pulsed amperometric detection

A simple and sensitive liquid chromatographic method for the separation and quantification of mono- and disaccharides in raw- and processed-milk is described. Samples of cows’, buffalos’, sheeps’ and goats’ milk were analyzed upon clarification and appropriate dilution for the quantification of lactose, galactose, glucose and N-acetylglucosamine (GlcNAc). The separation was accomplished by high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD), using a gold working electrode and dilute alkaline eluents modified by a millimolar concentration of barium acetate. The eluent composition employed was designed to provide optimum separation with respect to the selected sample, without interference from the matrix components. The analytical method was successfully employed for the determination of mono- and disaccharides naturally occurring in dairy milk, mozzarella cheese and whey samples, with high sensitivity and accuracy.     

高浓度二氧化氯气体的在线检测研究

在40℃下,高浓度ClO2气体在盘管中迅速溶解于水中达到平衡,使用分光光度法检测平衡溶液的浓度,从而间接测定出ClO2气体的浓度。该方法可检测体积分数大于0.14%的ClO2,响应时间为15~30s,相对标准偏差为0.3%,与连续碘量法相比测定结果没有显著性差异(P<0.01),全过程中未使用化学试剂,操作简便,干扰小,适用于的高浓度ClO2气体在线检测。     

Preparation of polymeric monoliths by copolymerization of acrylate monomers with amine functionalities for anion-exchange capillary liquid chromatography of proteins

Two novel polymeric monoliths for anion-exchange capillary liquid chromatography of proteins were prepared in a single step by a simple photoinitiated copolymerization of 2-(diethylamino)ethyl methacrylate and polyethylene glycol diacrylate (PEGDA), or copolymerization of 2-(acryloyloxy)ethyl trimethylammonium chloride and PEGDA, in the presence of selected porogens. The resulting monoliths contained functionalities of diethylaminoethyl (DEAE) as a weak anion-exchanger and quaternary amine as a strong anion-exchanger, respectively. An alternative weak anion-exchange monolith with DEAE functionalities was also synthesized by chemical modification after photoinitiated copolymerization of glycidyl methacrylate (GMA) and PEGDA. Important physical and chromatographic properties of the synthesized monoliths were characterized. The dynamic binding capacities of the three monoliths (24 mg/mL, 56 mg/mL and 32 mg/mL of column volume, respectively) were comparable or superior to values that have been reported for various other monoliths. Chromatographic performance was also similar to that provided by a modified poly(GMA-ethylene glycol dimethacrylate) monolith. Separation of standard proteins was achieved under gradient elution conditions using these monolithic columns. Peak capacities of 34, 58 and 36 proteins were obtained with analysis times of 20–30 min. This work represents a successful attempt to prepare functionalized monoliths via direct copolymerization of monomers with desired functionalities. Compared to earlier publications, additional surface modifications were avoided and the PEGDA crosslinker helped to improve the biocompatibility of the monolithic backbone.     

Rapid simultaneous determination of dexamethasone and betamethasone in milk by liquid chromatography tandem mass spectrometry with isotope dilution

A simple, sensitive and reliable analytical method for the rapid simultaneous determination of dexamethasone and betamethasone in milk by high performance liquid chromatography–negative electrospray ionization tandem mass spectrometry (HPLC–NESI-MS/MS) with isotope dilution was developed. Samples were directly purified through C₁₈ cartridge. Then the eluate was dried under nitrogen and residues were dissolved in mobile phase. Samples were analyzed by HPLC–MS/MS on a Hypercarb graphite column with a mixture of acetonitrile–water–formic acid as mobile phase. The samples were quantified using dexamethasone-D₄ as an internal standard. The procedure was validated according to the European Union regulation 2002/657/EC determining specificity, decision limit (CCα), detection capability (CCβ), trueness, precision, linearity and stability. The method is demonstrated to be suitable for the determination of dexamethasone and betamethasone in milk. The total time required for the analysis of one sample was about 35 min.     

High-performance liquid chromatography using a color-forming agent as a component of the mobile phase. Separation and determination of nickel and zinc wity xylenol orange

Summary A liquid chromatographic procedure for separating nickel and zinc has been developed. Xylenol orange, which is one of the sensitive and commercially available color-forming agents, was used as a component of the mobile phase. The two ions could be separated on weak anion-exchange gels within 10 min. The procedure was suitable for the determination of nickel and zinc in relatively pure solutions with fairly high sensitivity. The described liquid chromatographic analysis would be also potentially applicable for any aqueous sample containing trace levels of metal cations at 1–10 ppm.     

High-performance anion-exchange chromatography of carbohydrates using a new resin and pulsed amperometric detection

Summary This paper reports the results of a study on the use of a new polymer-based, strong anion-exchange, stationary phase for rapid and selective separation of carbohydrates and related compounds by high-pH, anion-exchange chromatography with pulsed amperometric detection. The new adsorbent has been obtained by direct nitration of 2.8 μm, spherical non-porous highly cross-linked, styrene-divinylbenzene copolymer beads, followed by reduction of superficially introduced nitro groups with nascent hydrogen and quaternization of the resultant amino groups with iodomethane. It is reported that by optimizing the ionic strength of the mobile phase, columns packed with the new anion-exchanger can be successfully employed to separate, either in isocratic or gradient elution mode, oligosaccharides, positional isomers of gluco-disaccharides, as well as uronic acids and sugar monophosphates.