Voltammetric detection of ovalbumin using a peptide labeled with an electroactive compound

For this study, a new method was developed to electrochemically detect ovalbumin via its binding with the peptide-1(RNRCKGTDVQAW) in lysozymes. The peptide that exists at the C-terminal of a lysozyme was combined with ovalbumin. When an electroactive compound was introduced to the N-terminal side of the peptide through ethylene gycolbis(sulfosuccinimidyl succinate), the labeled peptide-1 served as a probe for the detection of ovalbumin. The electrode responses of labeled peptide-1 were measured after the labeled peptide-1 and ovalbumin were incubated in a 0.1 M phosphate buffer (pH 5.6). As a result, the electrode response decreased as the concentration of ovalbumin increased. The detection limit of ovalbumin was 2.3 × 10⁻¹¹ M as estimated at 3-fold the standard deviation (3σ) (n = 5). Because the steric structure of the peptide and some of the amino acid residues were related to the binding, we prepared a peptide-2, to which the N- and C-terminals of peptide-1 were alternated. The decrease in the response for the labeled peptide-2 was less than that for the labeled peptide-1. In addition, the peak current of a peptide-3, for which the D of peptide-1 was replaced with S, was hardly changed with or without ovalbumin. Therefore, it was clear that the binding was influenced by the steric factors and by the sequence of the peptide. However, a peptide-1 with bis(sulfosuccinimidyl) suberate was designed to investigate the hydrophobic influences on the probe. The change in the peak current was smaller than that of peptide-1 with ethylene gycolbis(sulfosuccinimidyl succinate), which was due to the hydrophobic properties of the alkyl chain between the peptide and the ovalbumin. The proposed method could be applied to the determination of ovalbumin in egg whites. Consequently, the concept becomes an electrochemical sensing method for proteins based on the protein–peptide interaction.     

Voltammetric homogeneous binding assay of biotin without a separation step using iminobiotin labeled with an electroactive compound.

Avidin, which is one type of glycoprotein, has a strong affinity with biotin (Ka = 10(15) M(-1)). Iminobiotin also forms a complex with avidin (Ka = 10(8) M(-1) at pH 9.5). The avidin-iminobiotin complex changes to the avidin-biotin complex in the presence of biotin because of the difference of the binding constant to avidin. In this study, the interaction between avidin and iminobiotin labeled with an electroactive compound was investigated by voltammetry. After avidin and the labeled iminobiotin (LI) were incubated in 0.1 M phosphate buffer (pH 7.0), the peak currents of LI were measured in various concentrations of biotin. The peak currents increased with increasing the concentration of biotin. Thus, this observation indicates the formation of avidin-biotin complex. On the other hand, the formation of avidin-iminobiotin complex depended on the pH of the solution. LI combines with the avidin at pH 5.6-8.9 and dissociates at pH 4.6.     

Recognition based separation of HIV-Tat protein using avidin–biotin interaction in modified microfiltration membranes

Recognition based separation using modified microfiltration membranes provides an efficient and cost-effective alternative to conventional column chromatography for the separation and purification of a specific protein from mixture of proteins. In this study, Tat protein, which has been proposed as the specific target for AIDS vaccine, was separated and purified from a complex mixture of proteins, known as bacterial lysate (BL) using avidin–biotin interaction in 4-stack microfiltration membranes system. It was established by SDS-PAGE and Western Blot analysis that membrane based process recovered more pure form of Tat compared to conventional packed-bead column chromatography. The critical factors involved in the process, mainly, the accessibility of the covalently immobilized avidin sites by the biotinylated protein and the associated fouling of the membranes due to the permeation of proteins, were also studied. The accessibility of immobilized avidin sites in membrane was quantified by biotinylated solutions of different types and compositions. It was observed that permeation of proteins caused substantial fouling on the membrane matrix. The resistance offered by the protein layer and the approximate thickness of the protein layer were also quantified.     

Voltammetric analysis using a self-renewable non-mercury electrode

Galinstan is a new kind of electrode material and the galinstan electrode is a promising alternative to the commonly used mercury electrodes. The eutectic mixture of gallium, indium and tin is liquid at room temperature (m.p. −19°C) and its voltammetric behaviour is similar to that of mercury. The potential windows of use were determined for different pH values and are similar to those obtained with conventional mercury electrodes. Furthermore, the high hydrogen overpotential, which is characteristic for mercury, can be observed when galinstan is used as electrode material. Galinstan can be employed as a liquid electrode in the voltammetric analysis of different metal ions, such as lead and cadmium, in different supporting electrolytes. Our results indicate that the non-toxic liquid alloy galinstan could therefore become immensely important in electrochemical research as a potential surrogate material for mercury.     

Voltammetric detection of lectin using sugar labeled with electroactive substance.

The voltammetric detection of soybean agglutinin (SBA) was investigated on the basis of an interaction between the lectin and a sugar. Because galactose and lactose combined with SBA, the sugars were labeled by a Schiff base with an electroactive daunomycin. After the labeled sugar and SBA were mixed, measurements were carried out by voltammetry. When SBA-sugar binding occurs, a part of daunomycin of the labeled sugar is taken to the binding sites. As a result, SBA is detected by a change in the peak current of daunomycin, and the SBA-sugar interaction is evaluated. The length of the alkyl chain between daunomycin and the sugar was also considered. The electrode response to the concentration of SBA was linear over the range of 0.04-0.8 microg min(-1). The merits of this procedure are the convenient preparation of labeled sugar and a rapid measurement without separation. On the other hand, the detection of sugar at the 10(-9) mol dm(-3) level was achieved by a competitive reaction to limited binding sites of the lectin between the sugar and the labeled sugar.     

活化玻碳电极伏安法测定锰的研究

采用活化玻碳电极(GC)以伏安法对测定锰进行了研究。结果表明:沉积于电极表面的二氧化锰对锰(Ⅱ)的电化学氧化具有自催化作用,活化GC电极可极大地提高测定锰的灵敏度。在0.04mol LNH3 NH4Cl(pH9.0)底液中,锰浓度在6.0×10-8～1.0×10-5mol L范围内成线性关系,检出限为4.0×10-8mol L。用3×10-7mol L锰溶液重复测定9次,RSD为1.6%。     

Design of an electroactive peptide probe for sensing of a protein

We designed a new electroactive peptide probe that has a molecular recognition function for the sensing of a protein. Ovalbumin (OVA) was the model protein, and when RNRCKGTDVQAW interacted with OVA, it conjugated with a tyrosine-rich peptide (Y₄C). This peptide is electroactive, has a high degree of biocompatibility, and offers the possibility of gene expression. To measure the effect of a number of the tyrosine residues, voltammetric measurements were conducted using a series of tyrosine-rich peptides (Y_nC, n = 3–7) with sensitivities that ranged from 10⁻⁹ to 10⁻⁸ M. The electrode response of Y₅C was the maximum value in the series. However, the peak current did not increase when the number of tyrosine residues was increased in a linear fashion. This may have been due to the micelles that are formed by a tyrosine-rich surfactant peptide. Thus, Y₄C was suitable as an electroactive label for the construction of the peptide probe. The electrode response of Y₄CRNRCKGTDVQAW obtained by a glassy carbon electrode was 100-fold that of tyrosine alone. The measurement of OVA via the peptide probe resulted in a detection on the order of 10⁻¹² M. In contrast, the sensitivity of OVA using RCKGTDVQAWY₄C probe was at the 10⁻¹¹ M level, because the hydrophobic moiety gave it a molecular recognition function. The recoveries of the OVA using Y₄CRNRCKGTDVQAW in a solution containing fetal bovine serum ranged between 98 and 101%. Consequently, the combination of a specific peptide and an electroactive element could be a powerful probe for the sensing of proteins.     

Voltammetric study on the complex of thiram-copper(II) and its application

Based on the formation of tetramethylthiuram disulfide (thiram)-copper(II) complex by square-wave voltammetry on a glassy carbon electrode, a new method is proposed for determination of thiram. There is a good linear relationship between peak current and concentration of thiram in the range of  mol l⁻¹ (r=0.999). The method is applied to the determination of thiram residue in plant with satisfactory results, compared with results achieved by using HPLC. Two oxidation peaks and two reduction peaks are obtained by cyclic voltammetry on a glassy carbon electrode in 0.2 mol l⁻¹ HAc-NaAc (pH 4.0) solution containing thiram-copper(II) complex. The electrode reaction process is quasi-reversible with adsorptive characteristics. The mechanism of electrode reaction is discussed.     

Different Biotinylation Strategies for Competitive Immunoassay of Estradiol

Study on biotinylation strategies for competitive immunoassay of estradiol (E2) was carried out. Two types of competitive enzyme immunoassay (EIA) with Biotin-Avidin amplification system were established and optimized.The E2-Biotin conjugate was used as a tracer in one assay, and biotinylated antibody was used as a tracer in the other. In both of EIAs, horseradish peroxidase-labelled Avidin (Avidin-HRP) was used with a spectrometric determination of enzyme activity. The precision, sensitivity and specificity were measured and compared. The results showed that although both were satisfactory in specificity, the EIA with hapten-Biotin showed to be superior to the EIA with biotinylated antibody in sensitivity and precision. The limit of detection of serum E2 was 8 and 50 pg/mL with E2-Biotin and biotinylated antibody as tracer, respectively.     

玉米素和激动素的伏安行为

玉米素和激动素在０．１ｍｏｌ／Ｌ的醋酸－醋酸钠底液里能还原，产生很好的极谱峰，检测灵敏度可达２．５×１０＾－＾８ｍｏｌ／Ｌ，峰电位分别为－１．１８Ｖ和－１．１７Ｖ（对Ａｇ／ＡｇＣｌ）。测定了电极反应决定步骤的αｎα和电化学反应的标准速率常数ｋｓ，研究了它们对Ｃｕ＾２＾＋，Ｅｕ＾３＾＋，Ｃｄ＾２＾＋，Ｚｎ＾２＾＋的电极不产生的影响。     

Investigation by QCM of the Specific and Nonspecific Avidin Interaction onto a Biotinylated Polypyrrole Film

We have studied by gravimetric measurements using a quartz crystal microbalance (QCM), the adsorption of avidin onto a polypyrrole film. From QCM results, it appears that both the thickness and the redox state of polypyrrole strongly influence the avidin adsorption. This nonspecific interaction is larger for a thick film than for a thin one and, also for when the polymer is in its reduced state. We have also investigated by QCM the specific and nonspecific interaction of avidin onto biotinylated polypyrrole films having either a hydrophilic or hydrophobic character. It is shown that the amount of avidin immobilized by specific recognition is almost the same whatever the nature of the polymer matrix.     

磺胺二甲嘧啶的极谱伏安行为

本文考察了磺胺二甲嘧啶在多种底液中的极谱伏安行为，发现其在ＢｒｉｔｏｎＲｏｂｉｎｓｏｎ（ＢＲ）缓冲溶液（ｐＨ２．２）中产生一个良好的还原峰，峰电位为－０．８５Ｖ（ｖｓ．ＳＣＥ），峰电流与磺胺二甲嘧啶浓度在１×１０－７３×１０－４ｍｏｌ／Ｌ范围内呈良好的线性关系，检出限为９×１０－８ｍｏｌ／Ｌ，大多数金属离子和无机阴离子不干扰测定，可望用于定量测定用多种电化学方法研究了该还原峰电流的性质，结果表明，它是具有吸附性质的不可逆还原峰     

Voltammetric behavior of sulfadimetoxol using square-wave and adsorptive stripping square-wave techniques

The voltammetric behavior of sulfadimetoxol (SDX) was studied by square-wave techniques, leading to two methods for its determination in aqueous samples and veterinary formulations. The application of the square-wave mode shows the determination of SDX between 1 × 10⁻⁷ M and 2 × 10⁻⁶ M at −0.60 V and for the stripping voltammetry of adsorbed SDX with an accumulation step of 15 s proved to be more sensitive, yielding signals five times larger than those obtained without the accumulation. The determination of SDX was done between 2 × 10⁻⁸ M and 5 × 10⁻⁷ M by stripping mode. The relative standard deviations obtained for concentration levels of SDX as low as 3 × 10⁻⁷ M with square-wave was 3.4 % (n = 8) and for 2 × 10⁻⁷ M with stripping square-wave was 3.1 % (n = 8). The methods were satisfactorily applied for determining SDX in four veterinary products.     

Evaluation of Binding Between Electroactive Biotin Derivative and Streptavidin Immobilized on Chitin Film

Evaluation of the streptavidin‐biotin binding at the surface of chitin film was carried out with voltammetry. Immobilization of streptavidin was attempted to the protonated chitin film, based on an electrostatic interaction that hardly causes any change in the protein structure. The streptavidin‐biotin binding was estimated from changes in the electrode response of biotin labeled with an electroactive compound. Although the response of daunomycin as an electroactive compound did not change at an electrode covered with streptavidin/chitin film, the response of the labeled biotin decreased. This observation shows that streptavidin is immobilized on the chitin film and the biotin binds with immobilized streptavidin. Consequently, it was clear that the chitin film is useful as a reaction field for protein‐ligand binding. Generally, a binding event between protein and its ligand in the living body occurs on the cell surface. The electrochemical evaluation of protein‐ligand binding on a natural polysaccharide like chitin membrane surface is important.     

Voltammetric determination of As(III) in an aqueous zwitterionic complexing medium

Summary The polarographic behaviour and determination of As(III) in aqueous complexing electrolytes (bicine buffer solutions) ofpH values varying from 1.13–11.96 have been investigated at 25°C (direct current and differential pulse polarographic techniques). Using DC polarographic measurements, it was shown that reduction of As(III) takes place along one or three waves depending upon thepH value of the solution. Microcoulometric experiments have been performed at the limiting region of the different waves obtained at differentpH values. Cyclic voltammograms were recorded using a HDME to investigate the nature of reduction. Schemes for the mechanism of reduction occurring at the DME have been deduced. Kinetic parameters and wave characteristics for the reduction of As(III) have been calculated. A method for DPP determination of As(III) in bicine buffer solution ofpH 1.41 is reported. The detection limit of the method is 6.60×10^–8 M As(III).

---

Voltammetrische Bestimmung von As(III) in einem wäßrigen zwitterionischen komplexierenden Medium

Zusammenfassung Das polarographische Verhalten und die polarographische Bestimmung von As(III) in wäßrigen komplexierenden Elektrolyten (Bicin-Pufferlösungen) wurde beipH-Werten zwischen 1.13 und 11.96 und 25°C untersucht (Direktstrom- und Differentialpulstechniken). Mittels DC-Polarographie wurde gezeigt, daß die Reduktion von As(III) je nach dempH-Wert der Lösung in einer oder in drei Wellen erfolgt. In den Grenzbereichen der bei verschiedenenpH-Werten erhaltenen unterschiedlichen Wellen wurden microcoulometrische Experimente durchgeführt. Zur Untersuchung des Reduktionsvorgangs wurden cyclische Voltammogramme unter Verwendung einer HDME durchgeführt. Für den Mechanismus der an der Quecksilbertropfelektrode stattfindenden Reduktion wurden Reaktionsgleichungen ermittelt. Kinetische Parameter und Wellencharakteristika für die Reduktion von As(III) wurden berechnet. Eine Methode zur Bestimmung von As(III) mittels differentieller Pulspolarographie in Bicin-Pufferlòsung beipH 1.14 wird vorgestellt. Die Erfassungsgrenze der Methode liegt bei 6.60×10^–8 M As(III).

     

阳极微分脉冲伏安法测定3,4-二氢-2-羟基喹噁啉

3,4-二氢-2-羟基喹(?)啉(简称二氢喹(?)啉)是合成新型有机磷农药及一些喹(?)啉磺胺类药物的中间体.本文根据二氢喹(?)啉可被氧化成2-羟基喹(?)啉的性质,进行了阳极微分脉冲伏安法研究.结果表明,以玻碳电极为工作电极,在甲醇和Britton-Robinson混合液中,二氢喹(?)啉有良好的微分脉冲伏安峰.用此法测定了2-羟基喹(?)啉中二氢喹(?)啉的含量.经循环伏安法验证,电极反应为不可逆反应.     

Isotope‐Coded Affinity Tagging Technique Using Avidin Functional Affinity Electrophoresis: An Alternative to an Avidin Affinity Column

Avidin functional affinity electrophoresis (AFAEP) is substituted for an avidin affinity column (AAC) to capture biotinylated peptides in the Isotope‐Coded Affinity Tagging (ICAT) technique which is a valuable tool in quantitative proteomics. In this new technique, the AFAEP‐captured ICAT‐labeled biotinylated peptides are extracted with the biotin tag intact from the polyacrylamide gel piece with aqueous 95% formamide (pH 8.2) at 65 °C for 20 min, and then detected by a matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometer. Bovine serum albumin (BSA) and the ¹²C‐ and ¹³C‐ICAT reagents are used to test this AFAEP‐ICAT technique. The results show that both AFAEP and AAC methods provide quantitative information of the relative amounts of ¹²C‐ and ¹³C‐ICAT‐labeled biotinylated tryptic peptides of BSA in a sample. Compared with AAC, the AFAEP is cheaper to perform, more stringent in capturing the biotinylated peptides, and capable of simultaneously processing multiple samples.     

微分伏安法测定微量碘

采用过量联合氧化剂高锰酸钾-次氯酸钠氧化试液中碘至IO3-,剩余的高锰酸钾和次氯酸钠用过量的亚硫酸钠反应除去,利用IO3-的电活性,建立了在四硼酸钠-吐温-80底液中的线性扫描伏安法测定微量碘的方法.优化了试验条件,研究了伏安特性.在最佳试验条件下,一阶导数峰电流与碘质量浓度在0～16 μg·L-1叫范围内呈线性关系(r=0.996 4),检出限为0.6 μg·L-1.对共存离子作了干扰试验,表明方法的抗干扰能力较强,用于食品中微量碘的测定结果的相对标准偏差(n=6)值均小于0.9%,加标回收率在97.8%至99.2%之间.     

褪黑素的电化学氧化行为及伏安法测定

采用电化学方法研究了褪黑素在金电极上的不可逆氧化行为.结果表明：其伏安过程为受弱吸附和扩散共同控制的过程,氧化反应电荷转移数为2.采用伏安法对褪黑素进行测定,方法的检出限可达10^-10ml/L数量级.方法可用于脑白金胶囊中褪黑素含量的测定.     

Chronoamperometric and Voltammetric Characterization of Gold Ultramicroelectrode Arrays

Some prototypes of photolithographic‐built arrays of gold ultramicroelectrodes (UMEAs) have been electrochemically characterized and compared with a normal‐size electrode. The achievement of steady‐state conditions, effects of supporting electrolyte and the role of conditioning and activation have been considered. The results obtained show that it is possible to monitor the effective area of those devices by chronoamperometry, which confirms the convenience of using the internal auxiliary and reference electrodes and this evidences that steady‐state currents are holding in a wide range of scan rates. Additionally, some preliminary tests show the promising features of gold UMEAs in flow systems like FIA or HPLC.