Synthesis,structure, and electrochemistry of pyridinecarboxamide cobalt(III) complexes; the effect of bridge substituents on the redox properties

Two series of complexes of the types trans-[Co^III(Mebpb)(amine)₂]ClO₄ {Mebpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-methylbenzene dianion, and amine = pyrrolidine (prldn) (1a), piperidine (pprdn) (2a), morpholine (mrpln) (3a), benzylamine (bzlan) (4a)}, and trans-[Co^III(cbpb)(amine)₂]X {cbpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-chlorobenzene dianion, and amine = pyrrolidine (prldn), X = PF₆ (1b), piperidine (pprdn), X = PF₆ (2b), morpholine (mrpln), X = ClO₄ (3b), benzylamine (bzlan), X = PF₆ (4b)} have been synthesized and characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structure of 1a has been determined by X-ray diffraction. The electrochemical behavior of these complexes, with the goal of evaluating the effect of axial ligation and equatorial substitution on the redox properties, is also reported. The reduction potential of Co^III, ranging from −0.53 V for (1a) to −0.31 V for (3a) and from −0.48 V for (1b) to −0.22 V for (3b) show a relatively good correlation with the σ-donor ability of the axial ligands. The methyl and chloro substituents of the equatorial ligand have a considerable effect on the redox potentials of the central cobalt ion and the ligand-centered redox processes.     

(Amidomethyl)dimethylsilanol hydrohalides: Synthesis, NMR and IR studies. Characteristic features of the electronic structure from high-resolution X-ray study and quantum chemical calculation

(C,O)-chelate silanol hydrohalides RC(O)NHCH₂SiMe₂OH · HHal (2a,b and 5b), and their precursors, (C,O)-chelate chlorosilanes RC(O)NHCH₂SiMe₂Cl (6a,b) and disiloxanes [RC(O)NHCH₂SiMe₂]₂O (8a,b) (R = Me (a), Ph (b); Hal = Cl (2), Br (5)), were obtained by several routes. The original scheme of hydrolysis of the above chlorides was discussed in detail. X-ray analysis has shown that the silanol hydrohalogenides PhC(O)NHCH₂SiMe₂OH · HX (2b and 5b) in the crystal exist in the form of cation-anion pairs [PhC(O)NHCH₂SiMe₂(OH₂)]⁺ · X⁻ (14b · Cl⁻ and 14b · Br⁻) assembled by H-bonds in a 3D framework. The Si atom in the cation has a trigonal bipyramidal configuration with the oxygen atom of the carbonyl group and protonated hydroxyl exo-substituent in axial positions. The endocyclic Si-O bonds are equal with an average of 1.905 Å while the exocyclic Si-O bonds are 1.979 and 2.009 Å, for Hal = Cl and Br, respectively.Quantum chemical calculations have shown that the cation [PhC(O)NHCH₂SiMe₂(OH₂)]⁺ (14b) is stable only in the crystal. Based on a high-resolution X-ray study and a quantum chemical calculation, it was found that the chemical bonding pattern in the OSiO axial fragment of the cation 14b corresponds to a three-centred four electron interaction. The cation 14b should be considered as a silylium cation stabilized by coordinated H₂O molecules rather than a silyloxonium ion.     

Macrocycles with two exclusive hydrogen-bonding modes

A series of large, 44-membered macrocycles 7a-e were synthesized and characterized, which display two different diagonal binding modes. The unsubstituted macrocycle 7a strongly binds naphthalene-2,6-dicarboxylate through hydrogen bonds with the association constant (K_a ± 15%) of 4500 M⁻¹ in 40% (v/v) CD₃CN/CDCl₃ at 23 ± 1 °C. Introduction of an electron-withdrawing substituent (Cl) at all four corners increases the binding affinity (22,000 M⁻¹ for 7b), while that of an electron-donating substituent (pyrrolidinyl) greatly decreases it (150 M⁻¹ for 7c). The same propensity has been observed with macrocycles 7d and 7e bearing different substituents at two diagonal corners, suggesting that the relative population of the binding modes would be modulated by controlling the electron density of the aromatic ring.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Conversion of novel palladacycles into oxopyrrolo[3,4-b]quinolines

The quinolinylcyclopalladated complexes 3a–b were synthesised in good yields (81% and 77%) by the insertion reaction of the prepared dinuclear palladium complexes [Pd(C,N-2-C₉H₄N-CHO-3-R-6)Cl(PPh₃)]₂ [(R = H (2a), R = OMe (2b)] with isonitrile XyNC (Xy = 2,6-Me₂C₆H₃). The cyclopalladated complexes 3a–b were also obtained in low yields (39% and 33.5%) via a one pot oxidative addition reaction of quinoline chloride 1a–b with isonitrile XyNC:Pd(dba)₂ (4:1). The reactions of 3a–b with Tl(TfO) (TfO = triflate, CF₃SO₃) in the presence of H₂O or EtOH causes depalladation reactions of the complexes to provide the corresponding organic compounds 4a–b, 5a–b and 6a–b in yields (41%, 27% and 18–19%). The products were characterized by satisfactory elemental analyses and spectral studies (IR, ¹H, ¹³C and ³¹P NMR). The crystal structures of 2a, 3a and 3b were determined by X-ray diffraction studies.     

Thermal hydrosilylation of olefin with hydrosilane. Preparative and mechanistic aspects

The reaction of trichlorosilane (1a) at 250 °C with cycloalkenes, such as cyclopentene (2a), cyclohexene (2b), cycloheptene (2c), and cyclooctene (2d), gave cycloalkyltrichlorosilanes [C_nH_2n−1SiCl₃: n = 5 (3a), 6 (3b), 7 (3c), 8 (3d)] within 6 h in excellent yields (97-98%), but the similar reactions using methyldichlorosilane (1b) instead of 1a required a longer reaction time of 40 h and afforded cycloalkyl(methyl)dichlorosilanes [C_nH_2n−1SiMeCl₂: n = 5 (3e), 6 (3f), 7 (3g), 8 (3h)] in 88-92% yields with 4-8% recovery of reactant 2. In large (2, 0.29 mol)-scale preparations, the reactions of 2a and 2b with 1a (0.58 mol) under the same condition gave 3a and 3b in 95% and 94% isolated yields, respectively. The relative reactivity of four hydrosilanes [HSiCl_3−mMe_m: m = 0-3] in the reaction with 2a indicates that as the number of chlorine-substituent(s) on the silicon increases the rate of the reaction decreases in the following order: n = 3 > 2 > 1 ? 0. In the reaction with 1a, the relative reactivity of four cycloalkenes (ring size = 5-8) decreases in the following order: 2d > 2a > 2c > 2b. Meanwhile linear alkenes like 1-hexene undergo two reactions of self-isomerization and hydrosilylation with hydrosilane to give a mixture of the three isomers (1-, 2-, and 3-silylated hexanes). In this reaction, the reactivity of the terminal 1-hexene is higher than the internal 2- and 3-hexene. The redistribution of hydrosilane 1 and the polymerization of olefin 2 occurred rarely under the thermal reaction condition.     

Ruthenium vinylidene and carbyne complexes containing a multifunctional tridentate ligand with a PNN donor set

The neutral, octahedral ruthenium vinylidene complexes mer,trans-[(PNN)Cl₂Ru(CCHR)] (PNN = N-(2-diphenylphosphinobenzylidene)-2-(2-pyridyl)ethylamine; R = Ph, 1a; R = ^tBu, 1b) are reported. An X-ray crystallographic study of 1a confirms the tridentate, meridional coordination mode of the PNN ligand. Compounds 1a and 1b undergo regioselective electrophilic addition with HBF₄ · Et₂O at C_β of the vinylidene ligand at low temperatures, and are cleanly and quantitatively converted to the ruthenium carbynes mer,trans-[(PNN)Cl₂Ru(CCH₂R)][BF₄] (R = Ph, 2a; R = ^tBu, 2b). Carbynes 2a and 2b are stable only at low temperatures (<−50 °C). Complex 1a undergoes ligand substitution with L to yield mer,trans-[(PNN)Cl₂Ru(L)] (L = MeCN, 3a; L = CO, 3b).     

Synthesis and dynamics of atropisomeric (S)-N-(α-phenylethyl)benzamides

The synthesis of atropisomeric 2-substituted benzamides 2a-e, 3a-e, and 4a-e, and characterization by X-ray structure analysis of 2d, 2e, 3c, 3e, 4c, and 4e are reported. Dynamic ¹H NMR spectroscopic studies of benzamides 2b-d, 3b-d, and 4b-d indicate that only two of the four possible rotamers are present in solution, with population ratios ranging between 1.5:1 and 4.1:1. The measured free energy of activation to interconversion of the rotamers ranged from 12.4 to 18.9 kcal mol⁻¹. Benzamides ArCON[(S)-phenethyl]₂ (2e, 3e, and 4e), exhibited atropisomer ratios between 1.7:1 and 1:1, and free energies of interconversion of the rotamers ranged from 11.5 to 17.6 kcal mol⁻¹. The highest rotation barriers were observed for the ortho-nitro derivatives 2a-e. Molecular calculations at the semiempirical level (PM3MM) gave free energies of activation for benzamides 2e and 3e of 23.6 and 12.4 kcal mol⁻¹, respectively, which are comparable to the experimental values.     

Palladiumdichloride (ferrocenylethynyl)phosphanes and their use in Pd-catalyzed Heck-Mizoroki- and Suzuki-Miyaura carbon-carbon cross-coupling reactions

In this work the synthesis of phosphane selenides (FcCC)_nPh_3−nPSe (2a, n = 1; 2b, n = 2; 2c, n = 3; Fc = ferrocenyl, (η⁵-C₅H₄)(η⁵-C₅H₅)Fe) from (FcCC)_nPh_3−nP (1a, n = 1; 1b, n = 2; 1c, n = 3) and selenium is described to estimate the σ-donor properties of these systems by ³¹P{¹H} NMR spectroscopy. Progressive replacement of phenyl by ferrocenylethynyl causes a shielding of the phosphorus atom with increasing of the ¹J(³¹P-⁷⁷Se) coupling constants.The palladiumdichloride metal-organic complexes [((FcCC)_nPh_3−nP)₂PdCl₂] (3a, n = 1; 3b, n = 2; 3c, n = 3) have been used as (pre)catalysts in the Suzuki-Miyaura (reaction of 2-bromo-toluene (4a) and 4-bromo-acetophenone (4b), respectively, with phenyl boronic acid (5) to give 2-methyl biphenyl (6a) and 4-acetyl biphenyl (6b)) and in the Heck-Mizoroki reaction (treatment of iodobenzene (7) with tert-butyl acrylate (8) to give E-tert-butyl cinnamate (9)).The structures of molecules 1a, 1c, 2c, and 3c in the solid state were determined by single X-ray structure analysis showing that the structural parameters of these systems are unexceptional and correspond to those of related phosphanes, seleno phosphanes, and palladium dichloride complexes.     

Novel titanocene anti-cancer drugs derived from fulvenes and titanium dichloride

Starting from 6-(p−N,N-dimethylanilinyl)fulvene (1a) or 6-(pentamethylphenyl)fulvene (1b) [1,2-di(cyclopentadienyl)-1,2-di(p−N,N-dimethylaminophenyl)ethanediyl] titanium dichloride (2a) and [1,2-di(cyclopentadienyl)-1,2-bis(pentamethylphenyl)ethanediyl] titanium dichloride (2b) and their corresponding dithiocyanato complexes (3a, 3b) were synthesized. Titanocene 2b did not show a cytotoxic effect, but when 2a was tested against pig kidney carcinoma cells (LLC-PK) or human ovarian carcinoma cells (A2780/cp70) inhibitory concentrations (IC₅₀) of 2.7 × 10⁻⁴ and 1.9 ×  10⁻⁴ M, respectively, were observed.     

Synthesis, photophysical and electrophosphorescent properties of mononuclear Pt(II) complexes with arylamine functionalized cyclometalating ligands

Four cyclometalated Pt(II) complexes, i.e., [(L²)PtCl] (1b), [(L³)PtCl] (1c), [(L²)PtCCC₆H₅] (2b) and [(L³)PtCCC₆H₅] (2c) (HL² = 4-[p-(N-butyl-N-phenyl)anilino]-6-phenyl-2,2′-bipyridine and HL³ = 4-[p-(N,N′-dibutyl-N′-phenyl)phenylene-diamino]-phenyl-6-phenyl-2,2′-bipyridine), have been synthesized and verified by ¹H NMR, ¹³C NMR and X-ray crystallography. Unlike previously reported complexes [(L¹)PtCl] (1a) and [(L¹)PtCCC₆H₅] (2a) (HL¹ = 4,6-diphenyl-2,2′-bipyridine), intense and continuous absorption bands in the region of 300-500 nm with strong metal-to-ligand charge transfer (¹MLCT) (dπ(Pt) → π^∗(L)) transitions (ε ∼ 2 × 10⁴ dm³ mol⁻¹ cm⁻¹) at 449-467 nm were observed in the UV-Vis absorption spectra of complexes 1b, 1c, 2b and 2c. Meanwhile, with the introduction of electron-donating arylamino groups in the ligands of 1a and 2a, complexes 1b and 2b display stronger phosphorescence in CH₂Cl₂ solutions at room temperature with bathochromically shifted emission maxima at 595 and 600 nm, relatively higher quantum yields of 0.11 and 0.26, and much longer lifetimes of 8.4 and 4.5 μs, respectively. An electrochromic film of 1b-based polymer was obtained on Pt or ITO electrode surface, which suggests an efficient oxidative polymerization behavior. An orange multilayer organic light-emitting diode with 1b as phosphorescent dopant was fabricated, achieving a maximum current efficiency of 11.3 cd A⁻¹ and a maximum external efficiency of 5.7%. The luminescent properties of complexes 1c and 2c are dependent on pH value and solvent polarity, which is attributed to the protonation of arylamino units in the C^N^N cyclometalating ligands.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Synthesis and characterization of aluminum complexes of 2-pyrazol-1-yl-ethenolate ligands

The synthesis and the characterization of some new aluminum complexes with bidentate 2-pyrazol-1-yl-ethenolate ligands are described. 2-(3,5-Disubstituted pyrazol-1-yl)-1-phenylethanones, 1-PhC(O)CH₂-3,5-R₂C₃HN₂ (1a, R = Me; 1b, R = Bu^t), were prepared by solventless reaction of 3,5-dimethyl pyrazole or 3,5-di-tert-butyl pyrazole with PhC(O)CH₂Br. Reaction of 1a or 1b with (R¹ = Me, Et) yielded N,O-chelate alkylaluminum complexes (2a, R = R¹ = Me; 2b, R = Bu^t, R¹ = Me; 2c, R = Me, R¹ = Et). Compound 1a was readily lithiated with LiBuⁿ in thf or toluene to give lithiated species 3. Treatment of 3 with 0.5 equiv of MeAlCl₂ or AlCl₃ yielded five-coordinated aluminum complexes [XAl(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₂] (4, X = Me; 5, X = Cl). Reaction of 5 with an equiv of LiHBEt₃ generated [Al(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₃] (6). Complex 6 was also obtained by reaction of 3 with 1/3 equiv of AlCl₃. Treatment of 5 with 2 equiv of AlMe₃ yielded complex 2a, whereas with an equiv of AlMe₃ afforded a mixture of 2a and [Me(Cl)AlOC(Ph)CH{(3,5-Me₂C₃HN₂)-1}] (7). Compounds 1a, 1b, 2a-2c and 4-6 were characterized by elemental analyses, NMR and IR (for 1a and 1b) spectroscopy. The structures of complexes 2a and 5 were determined by single crystal X-ray diffraction techniques. Both 2a and 5 are monomeric in the solid state. The coordination geometries of the aluminum atoms are a distorted tetrahedron for 2a or a distorted trigonal bipyramid for 5.     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Copper(II) complexes of thioarylazo-pentanedione: Structures,magnetism, redox properties and correlation with DFT calculations

Copper(II) complexes of 3-((2-(alkylthio)phenylazo)-2,4-pentanedione, tridentate O, N, S donor ligands, are described in this work. Chloride bridged copper(II) polymers (1) and thiocyanato bridged copper(II) dimmers (2) are characterized by a single crystal X-ray diffraction study. The complexes show antiferromagnetic interactions, with J = −0.5 ± 0.1 cm⁻¹ (1a) and −25.8 ± 0.5 cm⁻¹ (2b), which implies stronger coupling in the –SCN-bridging compound. The spectra, redox and magnetism are explained by DFT studies.     

Synthesis, solid state structure and spectro-electrochemistry of ferrocene-ethynyl phosphine and phosphine oxide transition metal complexes

The synthesis of ferrocene-ethynyl phosphine platinum dichloride complexes based on (FcCC)_nPh_3−nP (1a, n = 1; 1b, n = 2; 1c, n = 3; Fc = ferrocenyl, (η⁵-C₅H₅)(η⁵-C₅H₄)Fe) is described. Air-oxidation of 1c afforded (FcCC)₃PO (6). Treatment of 1a-1c with [(PhCN)₂PtCl₂] (2) or [(tht)AuCl] (tht = tetrahydrothiophene) (7), respectively, gave the heterometallic transition complexes cis-[((FcCC)_nPh_3−nP)₂PtCl₂] (3a, n = 1; 3b, n = 2; 3c, n = 3) or [((FcCC)_nPPh_3−n)AuCl] (8a, n = 1; 8b, n = 2). Further treatment of these molecules with HCCMc (4a, Mc = Fc; 4b, Mc = Rc = (η⁵-C₅H₅)(η⁵-C₅H₄)Ru) in the presence of [CuI] produced trans-[((FcCC)Ph₂P)₂Pt(CCFc)₂] (5) (reaction of 3a with 4a) and [(FcCC)_nPh_3−nPAuCCMc] (n = 1: 9a, Mc = Fc; 9b, Mc = Rc; n = 2: 11a, Mc = Fc; 11b, Mc = Rc) (reaction of 4a, 4b with 8a, 8b), respectively.The structures of 3a, 5, 6, 8, 9a, and 9b in the solid state were established by single-crystal X-ray structure analysis. The main characteristic features of these molecules are the linear phosphorus-gold-acetylide arrangements, the tetra-coordination at phosphorus and the square-planar surrounding at platinum.The electrochemical and spectro-electrochemical behavior of complexes 5, 8a, 9a, 9b and [(Ph₃P)AuCCFc] was investigated in the UV/Vis/NIR. Near IR bands that are likely associated with charge transfer from the ((FcCC)Ph₂P)₂Pt or the ((FcCC)_nPh_3−nP)Au (n = 0, 1) moieties appear upon oxidation of the σ-bonded ferrocene-ethynyl groups. These bands undergo a (stepwise) blue shift as ferrocene-ethynyl substituents on the phosphine coligands are oxidized.     

A novel strapped porphyrin receptor for molecular recognition

A novel strapped porphyrin receptor Zn1, in which two electron-rich bis(p-phenylene)-34-crown ether-10 units are incorporated, has been designed and synthesized from the newly developed intermediate 7 for investigating new chemistry of molecular recognition. ¹H NMR and UV-Vis studies revealed that Zn1 displays relatively weak binding abilities to neutral electron deficient naphthalene-1,8,4,5-tetracarboxydiimide (NDI) derivatives 13 (no simple complexing stoichiometry was observed), 19 (K_a=48(±5) M⁻¹) and 30 (K_a=46(±5) M⁻¹) in chloroform-d, strong binding ability to pyridine derivative 25, (K_a=1.5(±0.12)×10³ M⁻¹) in chloroform, moderately strong binding ability to tetracationic compound 35·4PF₆ (K_a=475(±50) M⁻¹) in acetone-d₆, and very strong binding affinity to compound 22 (K_a=6.5(±0.7)×10⁵ M⁻¹), which consists of one pyridine and two NDI units, in chloroform. Remarkable cooperative effect of the intermolecular metal-ligand coordination and donor-acceptor interactions in complex Zn1·22 was observed by comparing the complexing behaviors between Zn1 and the appropriately designed guests. Complex Zn1·22 possesses an unique three-dimensional tri-site binding feature. For comparison, the complexing affinity of 1 toward compounds 13, 19, and 30 in chloroform-d and 35·4PF₆ in acetone-d₆ has also been investigated and the binding patterns in different complexes were explored. The results demonstrate that strapped porphyrin derivatives are ideal precursors for constructing new generation of three-dimensional multi-site artificial receptors for molecular recognition and host-guest chemistry.     

Heterolytic CH-bond activation in the synthesis of Ni{(2-aryl-κC)pyridine-κN}2 and derivatives

Thermolysis of Ni(OTf)₂ in 2-phenyl-pyridine or 2-tolyl-pyridine afforded the cationic chelate derivatives, [bis(2-aryl-pyridine)Ni{(2-aryl-κC²)pyridine-κN}]OTf (aryl = phenyl, 1a; tolyl, 1b). Addition of KBr to 1a and LiBr to 1b provided the bromides, (2-aryl-pyridine)BrNi{(2-aryl-κC²)pyridine-κN} (aryl = phenyl, 2a; tolyl, 2b). When subjected to KO^tBu in Et₂O, the bromides generated the entitled bis-cyclometalated compounds, Ni{(2-aryl-κC²)pyridine-κN}₂ (aryl = phenyl, 3a; tolyl, 3b). These compounds insert diphenylacetylene into one cyclometalate arm to produce [(2-aryl-κC²)pyridine-κN]Ni[2-(2-(1,2-diphenylethenyl-κC²)aryl)pyridine-κN] (aryl = phenyl, 4a; p-tolyl, 4b). X-ray crystallographic studies were conducted on 1a, 2a, 3a and 4a, and a brief DFT study of 3a confirmed its low spin configuration and rippled geometry.     

Intramolecularly coordinated organoantimony(III) carboxylates

The reactions of organoantimony chlorides L^1,2SbCl₂1 and 2 ([2,6-(ROCH₂)₂C₆H₃]⁻, R = Me; L¹ and R = t-Bu; L²) with silver salts of selected carboxylic acids resulted to corresponding organoantimony carboxylates L^1,2Sb(OOCR′)₂, 1a-c (for L¹) and 2a-c (for L²), where R′ = CH₃ for 1a, 2a; R′ = CHCH₂ for 1b, 2b and R′ = CF₃ for 1c, 2c. All compounds were characterized by the help of elemental analysis, ESI-MS, ¹H and ¹³C NMR spectroscopy. The solid state structure investigation using single crystal X-ray diffraction techniques (2a, c) and IR spectroscopy revealed significant differences in coordination mode of both O,C,O chelating ligand and carboxylic groups in this set of compounds. The structure of all compounds in solution of non-coordinating solvent (CDCl₃) was determined by means of variable temperature ¹H, ¹³C, ¹⁹F NMR spectroscopy and IR spectroscopy.