Investigation of the role of chelating ligand in the synthesis of ion-imprinted polymeric resins on the selective enrichment of uranium(VI)

Uranyl ion-imprinted polymeric (IIP) resins were prepared by dissolving stoichiometric amounts of uranyl nitrate and selected chelating ligands, viz. salicylaldoxime, catechol, succinicacid, 5,7-dichloroquinoline-8-ol and 4-vinyl pyridine in 2-methoxy ethanol (porogen) and copolymerizing thermally in the presence of 2-hydroxyethylmethacrylate (HEMA) and ethyleneglycol-dimethacrylate (EGDMA), using 2,2′-azobisisobutyronitrile (initiator). Again, IIP resins were also prepared on similar lines by utilizing ternary [uranium-non-vinylated ligand-vinylated ligand (4-vinyl pyridine)] complexes. Non-imprinted polymeric resins were identically prepared in both cases without the use of uranyl imprint ion. The percent enrichment and retention capacity studies showed significant imprinting effect in all cases. However, ion-imprinted polymeric resins formed with succinic acid (SA) or 5,7-dichloroquinoline-8-ol (DCQ) and 4-vinylpyridine (VP) alone gave quantitative enrichment and various parameters that influence the enrichment and elution were then optimized. The percent enrichment of uranium from synthetic seawater solutions was found to be 25.0 ± 0.5 and 83.0 ± 0.8 for SA-VP and DCQ-VP systems, respectively. The DCQ-VP-based IIP resins were successfully tested for the recovery of uranium from real seawater samples.     

Synthesis of nano-pore samarium (III)-imprinted polymer for preconcentrative separation of samarium ions from other lanthanide ions via solid phase extraction

A batch process was developed to separate samarium ions from some lanthanide ions by a novel solid phase which was prepared via the ion-imprinting technique. The samarium (III) ion-imprinted polymer (IIP) particles were synthesized by preparing the ternary complex of samarium ions with 5,7-dichloroquinoline-8-ol (DCQ) and 4-vinylpyridine (VP). Then, thermally copolymerization with styrene (functional monomer, STY) and divinylbenzene (cross-linking monomer, DVB) followed in the presence of 2-methoxy ethanol (porogen) and 2,2′-azobisisobutyronitrile (initiator, AIBN). The imprinted ion was removed by stirring the above particles with 50% (v/v) HCl to obtain the leached IIP particles. Moreover, control polymer (CP) particles were similarly prepared without the samarium ions. The unleached and leached IIP particles were characterized by X-ray diffraction (XRD), infra-red spectroscopy (IR), thermo gravimetric analysis (TGA) and scanning electron microscopy (SEM). Finally, preconcentration and selectivity studies for samarium and the other lanthanide ions were carried out. The preconcentration of the samarium (III) traces was studied during rebinding with the leached IIP particles as a function of pH, the weight of the polymer material, the preconcentration and the elution times, the eluent volume and the aqueous phase volume. These studies indicated that the samarium (III) amount as low as 1 μg, present in 200 mL, could be preconcentrated into 25 mL of 1.0 M HCl.     

Synthesis of imprinted polymer material with palladium ion nanopores and its analytical application

Ion imprinted polymer (IIP) materials with nanopores were prepared by formation of ternary complex of palladium imprint ion with dimethylglyoxime (DMG) and 4-vinylpyridine (VP, functional monomer) and thermally copolymerizing with styrene (crosslinking monomer) and divinylbenzene (cross linker) and 2,2′-azobisisobutyronitrile as initiator. The synthesis was carried out with cyclohexanol as porogen and subsequently leached with 50% (v/v) HCl to obtain leached IIP particles. These leached IIP particles can now pick up palladium ions from dilute aqueous solutions. The optimal acidity for quantitative enrichment was 0.2-0.4N HCl and eluted completely by stirring for 15 min with 2×10 ml of 50% (v/v) HCl. The palladium ion imprinting polymer gave 100 times higher distribution ratio than ion recognition (blank) polymer (IRP). Further, percent extraction, distribution ratio and selectivity coefficients of palladium and other selected inorganic ions using IRP and IIP particles were determined and compared. Five replicate determinations of 50 μg of palladium in 1 l of solution gave a mean absorbance of 0.200 with a relative standard deviation of 2.12%. The detection limit corresponding to three times the standard deviation of the blank was 2.5 μg of palladium/l.     

Ion imprinted polymer particles: synthesis, characterization and dysprosium ion uptake properties suitable for analytical applications

Dysprosium(III) ion imprinted polymer particles were prepared by the copolymerization of styrene monomers and a crosslinking agent divinylbenzene in the presence of dysprosium(III)-5,7-dichloroquinoline-8-ol-4-vinyl pyridine ternary complex wherein dysprosium(III) ion is the imprint ion and is used to form the imprinted polymer. The dysprosium(III) ion was removed from polymer particles by leaching with 1:1 HCl which leaves a cavity in the polymer particles. The polymer particles both prior to and after leaching have been characterized by IR, TGA, DTA and XRD studies. The leached particles selectively preconcentrated dysprosium ion from dilute aqueous solutions as determined spectrophotometrically using Arsenazo-I as reagent. The optimum pH value for quantitative enrichment is 6-9 and desorption can be achieved by using 25 ml of 1 mol/l of HCl. The retention capacity of the polymer particles was found to be 40.15 mg/g, which is much higher than MIPs prepared by other imprinting techniques. The dysprosium ion imprinting polymer gave 40 times higher distribution ratio for dysprosium ion compared to blank polymer. More significantly the selectivity coefficients of dysprosium compared to other lanthanides results in enhancement by 60-180-fold. The separation factors with respect to other selected lanthanides were also compared with liquid-liquid extractive separation using di-2-ethylhexyl phosphoric acid (D2EHPA) as extractant. The selectivity of dysprosium ion imprinting polymer (IIP) particles for dysprosium over yttrium is much higher and comparable in case of Nd and Lu when compared to conventional extractant such as D2EHPA in liquid-liquid extraction (LLE). Five replicate determinations of 50 μg of dysprosium present in 250 ml of sample gave a mean absorbance of 0.150 with a relative standard deviation of 2.42%. The detection limit corresponding to three times the standard deviation of the blank was found to be 2 μg/250 ml.     

Ion imprinted polymer particles for separation of yttrium from selected lanthanides

Lanthanide(III) (Dy, Gd, Tb and Y) ion imprinted polymer (IIP) materials were synthesized via single pot reaction by mixing lanthanide imprint ion with 5,7-dichloroquinoline-8-ol, 4-vinylpyridine, styrene, divinylbenzene and 2,2'-azobisisobutyronitrile in 2-methoxyethanol porogen. The imprint ion was removed by stirring the above materials (after powdering) with 6 mol/L HCl to obtain the respective lanthanide IIP particles. Y-Dy, Y-Gd and Dy-Gd polymer particles were obtained by physically mixing equal amounts of the respective leached individual lanthanide(III) particles. Control polymer (CP) particles were similarly prepared without imprint ion. Application of the above synthesized polymer particles was tested for separation of Y from Dy, Gd and Tb employing batch and column SPE methods using inductively coupled plasma atomic emission spectrometry for the determination. Optimization studies show that Y present in 500 mL can be preconcentrated using Dy-Gd IIP particles and eluted with 20 mL of 1.0 mol/L of HCl, providing an enrichment factor of approximately 25. Dy-Gd IIP particles offer higher selectivity coefficients for Y over other lanthanides compared to other IIP particles and commercial liquid-liquid extractants. Selectivity studies for Y over other coexisting inorganic species (other than lanthanides) were also conducted and the results obtained show a quantitative separation of Y from other inorganics other than Cu(II) and Fe(III). Furthermore, both batch and column studies indicate the purification of yttrium concentrate from 55.0 +/- 0.2 to 65.2 +/- 0.2% in a single stage of operation.     

Solid phase extraction preconcentration of cobalt and nickel with 5,7-dichloroquinone-8-ol embedded styrene-ethylene glycol dimethacrylate polymer particles and determination by flame atomic absorption spectrometry (FAAS)

This article explores the synthesis of styrene-divinyl benzene (DVB)/ethylene glycol dimethacrylate (EGDMA) polymers embedded with quinoline-8-ol (Q) or its dihalo derivatives by thermal means in the presence and absence of 4-vinyl pyridine (VP). The above-synthesized polymers were found to enrich cobalt and nickel present in admixtures. Of these, 5,7-dichloroquinoline-8-ol (DCQ) embedded styrene-EGDMA polymer particles enrich cobalt and nickel quantitatively from dilute aqueous solutions within 5 min of preconcentration time. Styrene-EGDMA, DCQ embedded styrene-EGDMA particles obtained by bulk polymerization and cobalt/nickel bonded polymers were characterized by FTIR, thermogravimetric analysis (TGA), elemental analysis and surface area studies. The use of these polymer particles obtained by bulk polymerization for the solid phase extractive preconcentration of cobalt and nickel was investigated in detail and explores the possibility of employing this procedure for the analysis of cobalt and nickel in soil and sediment samples using a simple, low cost and readily available flame atomic absorption spectrometric instrument was explored.     

Effect of Porogen Type on the Synthesis of Uranium Ion Imprinted Polymer Materials for the Preconcentration/Separation of Traces of Uranium

Ion Imprinted Polymer (IIP) materials were prepared from different porogens by copolymerization of UO₂²⁺-5,7,dichloroquinoline-8-ol-4-vinylpyridine ternary complex in the presence of styrene as monomer, divinyl benzene as crosslinking agent and 2,2-azobisisobutyronitrile as initiator. The uranyl ion was removed on leaching with 50% (v/v) HCl, which leaves cavities in the polymer particles. Of the various porogens tested, 2-methoxy ethanol gave a higher retention/adsorption capacity for uranium and better selectivity for uranium over thorium. The optimum pH value for quantitative enrichment is 5.0–7.0, and desorption can be achieved with 5mL of 1M HCl. The retention capacity of the uranyl ion imprinted polymer particles was found to be 34.0mgg^–1 for uranium, which is much higher than blank or ion recognition polymer. More significantly, the selectivity coefficient (S_U/Th) is much higher (99.0) with 2-methoxy ethanol as porogen. The polymer particles obtained from this porogen have been characterized by IR, TGA, DTA, XRD, SEM and EDS analysis. Five replicate determinations of 40µg of uranyl ion present in 1000mL of aqueous solution with Arsenazo III spectrophotometric method gave a mean absorbance of 0.185 with a relative standard deviation of 2.46%. The detection limit corresponding to 3 times the standard deviation of the blank was found to be 2ngmL^–1.     

Preconcentrative separation of palladium(II) using palladium(II) ion-imprinted polymer particles formed with different quinoline derivatives and evaluation of binding parameters based on adsorption isotherm models

Palladium(II) ion-imprinted polymer (IIP) materials were synthesized by thermally polymerizing the ternary complexes of palladium(II) with amino (AQ) or hydroxy (HQ) or mercapto (MQ) derivatives of quinoline and 4-vinyl-pyridine. The functional and crosslinking monomers used during polymerization were 2-hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EGDMA). 2,2′-Azobisisobutyronitrile (AIBN) and 2-methoxy ethanol were used as the initiator and porogen, respectively. The resulting polymer materials were dried in an oven at 80 °C, ground and sieved to obtain IIP particles which were then subjected to leaching with 50% (v/v) HCl to obtain the leached palladium(II) IIP particles. Control polymer (CP) particles were also prepared by following the above procedure described for IIP particles. The CP particles, unleached and leached AQ-based IIP particles were then characterized by IR, XRD and microanalysis studies. Analytical studies such as preconcentration of palladium(II) from dilute aqueous solutions and separation studies in the presence of selected noble and base metals which co-exist with palladium(II) in its ore or mineral deposits were systematically studied using CP and IIP particles and are compared. AQ-based IIP particles gave higher percent extraction and selectivity coefficients compared to HQ- or MQ-based IIP particles. Five replicate determinations of 25 μg of palladium(II) present in 500 ml of aqueous solution, when subjected to preconcentration and determination by iodide-Rhodamine 6G procedure gave a mean absorbance of 0.104 with a relative standard deviation of 2.25%. The detection limit corresponding to three times the standard deviation of the blank was found to be 5.0 μg of palladium(II) per litre. The rebinding studies using AQ-, HQ- and MQ-based IIPs were carried out and were fitted to the different adsorption isotherm models, viz. Langmuir (L), Freundlich (F) and Langmuir-Freundlich (LF). These adsorption models were used for the evaluation of binding parameters and in elucidating the nature and type of bonding in the IIPs. The results of rebinding experiments showed discrimination between the three IIPs based on the donor atoms of the ligands.     

Effect of gamma-irradiation of ion imprinted polymer (IIP) particles for the preconcentrative separation of dysprosium from other selected lanthanides

The selectivity of zinc with respect to copper ions was improved by γ-irradiation of surface imprinted polymer particles. We have reported the preparation of dysprosium ion imprinted polymer (IIP) particles by covalent approach during molecular imprinting. This paper reports the results obtained after γ-irradiation of dysprosium IIP particles and their use in the preconcentration/separation of dysprosium from dilute aqueous solutions containing other selected lanthanides. Further, the characterisation of blank and dysprosium IIP particles was carried out either with and without irradiation by IR, thermogravimetric analysis (TGA), differential thermal analysis (DTA), XRD and surface area and pore size analysis techniques. The significant features observed in these experiments in the non-selectivity of blank polymer particles for dysprosium over other lanthanide ions and 35-180-fold enhancement in selectivity coefficients of irradiated dysprosium IIPs formed by covalent approach. In addition, the selectivity coefficients obtainable by γ-irradiated were compared with unirradiated dysprosium IIP particles and separation factors obtained by liquid-liquid extraction separation using di(2-ethyl hexyl) phosphoric acid as extractant.     

Ternary ion-association complex based ion imprinted polymers (IIPs) for trace determination of palladium(II) in environmental samples

A new ion imprinted polymer (IIP) material was synthesized by co-polymerization of palladium-iodide-vinyl pyridinium/palladium-thiocyanate-vinyl pyridinium ion ternary ion-association complex taken in methanol/DMSO with 2-hydroxyethyl methacrylate (functional monomer) and ethylene glycol dimethacrylate (crosslinking monomer) in the presence of 2,2′-azobisisobutryonitrile (initiator). The imprinted anionic species [PdI₄]²⁻ or [Pd(SCN)₄]²⁻ were removed by leaching the dried and powdered materials particles for 18 h with 6 M HCl to obtain leached IIP particles. Non-imprinted/control polymers were also prepared in a similar fashion without the template. Various parameters that influence the percent extraction of palladium, viz. concentration of KI or KSCN, pH, weight of polymer particles, preconcentration and elution times, aqueous phase volume, etc., were systematically studied for both the systems, i.e., in batch as well as flow injection modes. As the on-line flow injection-flame atomic absorption spectrometric (FI-FAAS) allow offer higher enrichment factor, better precision and can analyze more samples for a given time, compared to batch method, this procedure is preferred for the analysis of palladium present in the street/fan blade dust samples collected from busy cities of India and the values obtained were compared with the standard ICPMS values.     

A stoichiometric imprinted chelating resin for selective recognition of copper(II) ions in aqueous media

This work reports the preparation of a new copper(II) ion-imprinted polymer (IIP) material, using 5,6;14,15-dibenzo-1,4-dioxa-8,12-diazacyclopentadecane-5,14-diene (DBDA15C4) and 2-vinylpyridine (VP) as a non-vinylated chelating agent and a functional vinyl monomer, respectively. The Cu²⁺ ion can form stable complexes with DBDA15C4 and VP. The stoichiometries of Cu²⁺-DBDA15C4 and ternary Cu²⁺-DBDA15C4-VP complexes were elucidated using conductometric and spectrophotometric methods, and found to be Cu²⁺(DBDA15C4), Cu²⁺(DBDA15C4)₂ and Cu²⁺(DBDA15C4)(VP)₂. The results obtained from solution studies were also supported by ab initio theoretical calculations. The resulting ternary complex Cu²⁺(DBDA15C4)(VP)₂ was copolymerized with ethyleneglycoldimethacrylate, as a cross-linking monomer, via bulk polymerization method. The imprinted copper ion was removed from the polymeric matrix by 0.1 M HNO₃. The Cu²⁺-imprinted polymer particles were characterized by IR spectroscopy and elemental analysis. Optimum pH range for rebinding of Cu²⁺ on the IIP and equilibrium binding time were 7.0-7.5 and 45 min, respectively. Sorbent capacity and enrichment factor for Cu²⁺ were obtained as 75.3 ± 1.9 μmol g⁻¹ and 100, respectively. In selectivity study, it was found that imprinting results in increased affinity of the material toward Cu²⁺ ion over other competitor metal ions with the same charge and close ionic radius. The prepared IIPs were repeatedly used and regenerated for five times without a significant decrease in polymer binding affinities.     

Silver ion imprinted polymer nanobeads based on a aza-thioether crown containing a 1,10-phenanthroline subunit for solid phase extraction and for voltammetric and potentiometric silver sensors

A new nano-sized silver(I) ion-imprinted polymer (IIP) was prepared via precipitation copolymerization using ethyleneglycol dimethacrylate, as a cross-linking agent in the presence of Ag⁺ and an aza-thioether crown containing a 1,10-phenanthroline subunit as a highly selective complexing agent. The imprint silver(I) ion was removed from the polymeric matrix using a 1.0 M HNO₃ solution. The resulting powder material was characterized using IR spectroscopy and scanning electron microscopy. The SEM micrographs showed colloidal nanoparticles of about 52 nm and 75 nm in diameter and slightly irregular in shape for leached and unleached IIPs, respectively. The optimal pH for quantitative enrichment was 6.0 and maximum sorbent capacity of the prepared IIP for Ag⁺ was 18.08 μmol g⁻¹. The relative standard deviation and limit of detection (LOD = 3S_b/m) for flame atomic absorption spectrometric determination of silver(I) ion, after its selective extraction by the prepared IIP nanobeads, were evaluated as 2.42% and 2.2 × 10⁻⁸ M, respectively. The new Ag⁺-IIP was also applied as a suitable sensing element to the preparation of highly selective and sensitive voltammetric and potentiometric sensors for ultra trace detection of silver(I) ion in water samples, with limits of detection of 9.0 × 10⁻¹⁰ and 1.2 × 10⁻⁹ M, respectively.     

Amperometric tape ion sensors for cadmium(II) ion analysis

This paper describes a novel tape platform ion sensing methodology specific to the detection of cadmium(II) ions in aqueous solution based on assisted ion transfer reactions across a polarized water | organic gel micro-interface. The tape ion sensors were constructed to incorporate the micro-water | polyvinylchloride-2-nitrophenylethyl ether (PVC-NPOE) gel interfaces referred to as ionodes. The sensors have overall thicknesses less than 300 μm, allowing their packaging in a disposable tape format. The detection methodology is based on the selective assisted transfer of the cadmium ion in aqueous phase by ETH 1062 present in the PVC-NPOE gel layer and was first investigated using cyclic voltammetry. Quantitative analysis of cadmium(II) ions in aqueous solution using the tape sensors was then conducted under stop-flow conditions. Detection limits as low as 20 ppb (178 nM) for Cd(II) ions in very small volumes as low as a single 20 μl droplet without any sample preconcentration was achieved in an analysis time of approximately 20 s, which could be easily employed for the direct measurement of Cd(II) ion levels in various field applications. The tape ion sensor can also be used in a flow-cell geometry to preconcentrate Cd(II) ions from aqueous samples and further improve the detection limit.     

Complexation of poly(acrylic acid)s with uranyl ion

The complexation of uranyl ion (UO₂²⁺) in aqueous solution with polymers containing carboxylic acid groups was studied potentiometrically. Overall formation constants of the uranyl complexes with poly(methacrylic acid) and crosslinked poly(acrylic acid) were much larger than those with the corresponding low molecular carboxylic acids. Decrease in the viscosity of the polymer solution on adding uranyl ion indicated that poly(acrylic acid) forms intra-polymer chelates with uranyl ion. The crosslinked poly(acrylic acid) adsorbed uranyl ions at higher efficiency than transition metal ions.     

Assessment of ion imprinted polymers based on Pd(II) chelate complexes for preconcentration and FAAS determination of palladium

New ion-imprinted polymeric (IIP) materials were synthesized by copolymerization of 4-vinylpyridine (VP) and styrene as functional monomers and divinylbenzene as a cross-linking agent with chelating complexes of Pd(II) in the presence of 2,2-azobisisobutyronitrile as an initiator. The complexes of Pd(II) with ammonium pyrrolidinedithiocarbamate (APDC), N,N′-diethylthiourea (DET), and dimethylglyoxime (DMG) were used for this purpose. Chloroform, ethanol, and cyclohexanol were applied as porogens. The ion-imprinted polymers were tested in a flow mode as sorbents for solid-phase extraction of palladium from aqueous solutions. The conditions of Pd(II) separation on all polymers were optimized. The efficiencies of retention of Pd on different polymers in the presence of high excess of interfering ions were compared. The effect of the used porogen on the analytical performance of the prepared polymers was also investigated. The calculated sorbent capacities for Pd(II) were in the range from 9.25 mg g⁻¹ to 13.3 mg g⁻¹. The sorbent with Pd(II) imprinted as Pd-DMG-VP complex in chloroform was used for preconcentration of trace amounts of Pd. The detection limit for 100 mL of the sample was 5 μg L⁻¹ using flame atomic absorption spectrometry (FAAS). The developed method was applied for the determination of Pd in water samples.     

Separation and determination of trace uranium using a double-receptor sandwich supramolecule method based on immobilized salophen and fluorescence labeled oligonucleotide

A double-receptor sandwich supramolecule method for the separation and determination of trace uranium was proposed in this paper. One receptor is a salophen which can react with uranyl to form a uranyl-salophen complex, and another receptor is an oligonucleotide which can bind uranyl to form oligonucleotide-uranyl-salophen supramolecule. The salophen was immobilized on the surface of silica gel particles and used as the solid phase receptor for separating uranium from solution. The oligonucleotide was labeled with a fluorescent group and used as the labeled receptor for quantitatively analyzing uranium. In the procedure of separation and determination, uranyl ion was first combined with the solid phase receptor and then conjugated with the labeled receptor to form the sandwich-type supramolecule. The labeled receptor in the sandwich supramolecule was then eluted and determined by fluorescence analysis. The experimental results demonstrate that this method has a number of advantages such as high selectivity, excellent pre-concentration capability, high sensitivity, good stability and low cost. Under optimal conditions, the linear range for the detection of uranium is 0.5–30.0 ng mL⁻¹ with a detection limit of 0.2 ng mL⁻¹. The proposed method was successfully applied for the separation and determination of uranium in real samples with the recoveries of 95.0–105.5%.     

Photochemical reduction of uranyl ion with ditertiary phosphines in dry acetone

Time-resolved transient absorption spectra have been observed using monochromatic light (=347.1 nm) from a 25 ns pulsed ruby laser. Collision between optically excited uranyl ion and ditertiary phosphines lead to photochemical reduction of uranyl ion to uranium(V) in non-aqueous medium. Stern-Volmer constants measured from lifetime measurement and quantum yields for uranium(V) formation reveal that electron transfer phenomenon competes with photophysical deactivation because of the presence of phenyl groups. Since ditertiary phosphines have two electron donating phosphorus atoms, are better reductant than monodentate phosphines in non aqueous medium.     

Imprinted polymer particles for selenium uptake: synthesis, characterization and analytical applications

This work reports the preparation of molecularly imprinted polymer (MIP) particles for selective extraction and determination of selenium ions from aqueous media. Polymerization was achieved in a glass tube containing SeO₂, o-phenylenediamine, 2-vinylpyridine (VP), ethyleneglycoldimethacrylate (EDMA), 2,2′-azobisisobutyronitrile (AIBN). The polymer block obtained was ground and sieved (55-75 μm) and the Se-o-phenylenediamine complex was removed from polymer particles by leaching with 2 M of HCl, which leaves a cavity in the polymer particles. The polymer particles both prior to and after leaching have been characterized by IR and thermogravimetric (TG) studies. The effect of different parameters, such as pH, extraction time, type and least amount of eluent for elution of complex from polymer were evaluated. Extraction efficiencies >99% were obtained by elution of the polymers with 15 mL of methanol-acetonitrile mixture (1:2, v/v). The limit of detection of the proposed method followed by hydride generation atomic absorption spectroscopy (HG-AAS) was found to be 3.3 μg L⁻¹ and a dynamic linear range (DLR) of 10-200 μg L⁻¹ was obtained. The relative standard deviations (R.S.D.s) at 30.0 μg L⁻¹ of Se were below than 8.1%. The influence of various cationic interferences on percent recovery of complex was studied. The method was applied to the recovery and determination of selenium in different real samples.     

Use of amidoximated hydrogel for removal and recovery of U(VI) ion from water samples

Poly(acrylamidoxime-co-2-acrylamido-2-methylpropane sulfonic acid) (PAMSA) hydrogel was prepared by copolymerization of acrylonitrile and 2-acrylamido-2-methylpropane sulfonic acid as monomer, N,N′-methylenebis(acrylamide) as crosslinking agent and potassium peroxodisulfate as initiator. Amidoximated copolymer network was prepared by the reaction of copolymer network with hydroxylamine hydrochloride. A batch procedure was used for the determination of the characteristics of the U(VI) solid phase extraction from the amidoximated hydrogel. The determination of U(VI) was performed by spectrophotometric method using arsenazo-III as complexing agent. Optimal pH value for the quantitative preconcentration was 3, and full desorption was achieved with 3 mol L⁻¹ HClO₄. The adsorption process can be well described by the pseudo-second-order kinetic model, and the equilibrium adsorption isotherm was closely fitted with the Langmuir model. A preconcentration factor of 20 and the three sigma detection limit of 2.8 μg L⁻¹ (n = 20) were achieved for uranium(VI) ions. The PAMSA hydrogel was used for separating and preconcentrating the uranyl ion existing in sea water samples, thermal spring water samples and the certified reference materials (TMDA 64; fortified lake water sample).     

Selective Adsorption of Co(Ⅱ)Ions by Whisker Surface Ion-Imprinted Polymer: Equilibrium and Kinetics Modeling

Based on sodium trititanate whisker as support particles, the surface ion‐imprinted polymer (S‐IIP) was synthesized for the selective adsorption of Co(II) ions from aqueous solution. Characterization of S‐IIP was achieved by FTIR spectra and SEM micrographs. Kinetic properties were successfully investigated by the pseudo‐first‐order model and pseudo‐second‐order model, and a chemisorption process as the essential adsorption step was also proposed. Equilibrium data were fitted with the Langmuir, Dubinin‐Radushkevich and Freundlich isotherm equations, and the maximum adsorption amount of monolayer saturation for S‐IIP was 33.75 mg/g at 298 K. Moreover, dimensionless separation factor R_L (R_L<1.0) indicated a highly favourable adsorption system between Co(II) ions and S‐IIP. Selectivity experiments showed that selective adsorption of Co(II) ions for S‐IIP was significantly higher than that of non‐imprinted polymer (NIP).