Isolation and purification of alkaloids from lotus leaves by ionic‐liquid‐modified high‐speed countercurrent chromatography

An effective high‐speed countercurrent chromatography method was successfully established by using ionic liquids as the modifier of the two‐phase solvent system. Adding a small amount of ionic liquids significantly shortens the separation time and improves the separation efficiency. The conditions of ionic‐liquid‐modified high‐speed countercurrent chromatography including solvent systems, types and content of added ionic liquids, and ionic liquids posttreatment were investigated. The established method was successfully applied to separate alkaloids from lotus leaves using a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water/[C₄mim][BF₄] (1:5:1:5:0.15, v/v/v/v/v). Four alkaloids pronuciferine (1.7 mg), N‐nornuciferine (4.3 mg), nuciferine (3.1 mg), and roemerine (2.1 mg) were obtained with the purities of 90.53, 92.25, 99.86, and 98.63%, respectively, from 100 mg crude extract of lotus leaves. The results indicated that the ionic‐liquid‐modified high‐speed countercurrent chromatography method was suitable for alkaloid separation from lotus leaves and would be a promising method for the separation of alkaloids from other natural products.     

Separation of aromatic solvents from oil refinery reformates by a newly designed ionic liquid using gas chromatography with flame ionization detection

The aim of this study was to determine whether the new ionic liquid, N,N‐dimethyl‐2‐oxopyrrolidonium iodide, synthesized in our laboratory is a suitable solvent for the separation of aromatic components benzene, toluene, ethylbenzene, and xylenes from petroleum mixtures (reformates) in liquid–liquid extraction. In pursuance of the above aim, a method to extract all components of a mixture, containing four aromatic components simultaneously, was developed. A new ionic liquid and a previously used liquid were compared for their extraction abilities. These ionic liquids were, respectively, N,N‐dimethyl‐2‐oxopyrrolidinium iodide and 1‐ethyl‐3‐methyl imidazolium ethyl sulfate. The concentrations of each benzene, toluene, ethylbenzene, and xylenes component in the extract and raffinate phases were measured by gas chromatography with flame ionization detection as volume percent to determine the extraction ability of the ionic liquids. The results obtained for both the reformate samples and model mixtures indicated that the new ionic liquid was effective as an extracting solvent for the recovery of aromatic components from reformates. Also the analysis results, using gas chromatography with flame ionization detection, for the reformate samples were as good as the results obtained by a local oil refinery. The extraction results also show that the developed method is very suitable for the separation and analysis of aromatic components in reformates.     

Indole 3-alkylation/vinylation under catalysis of the guanidinium ionic liquids

Two ionic liquids, N,N,N,N-tetramethylguanidinium trifluoroacetate (TMGT) and the unprecedented N,N,N,N-tetramethylguanidinium triflate (TMGT_f), were used as catalyst solvents in condensations between indoles and arylaldehydes or 1,3-diketones providing a simple and efficient method for synthesis of bis(3-indolyl)methanes or casually 3-alkenylindoles due to stereoelectronic concerns of reactants. The ionic liquids are easily separated and reused for several times.     

The preparation of supported ionic liquids (SILs) and their application in rare metals separation

This review summarizes the preparation methods of support ionic liquids (SILs) and their applications in rare metals separation. The rare metals separation includes the recovery of high value metal ions and the removal of heavy metal ions from wastewater. SILs can be used as a kind of highly efficient multifunctional separation materials. The preparation methods of SILs include chemical immobilization technique in which ILs moieties are supported on solid supports via covalent bonds and physical immobilization techniques in which ILs are immobilized on solid supports via physical method such as simple im- pregnation, sol-gel method. According to the difference of solid supports, this review summarizes the application of polymer supported ionic liquids (P-SILs), silica based material supported ionic liquids (SM-SILs) and membrane supported ionic liq- uids (M-SILs) in rare metals separation. P-SILs and SM-SILs prepared by chemical method with N-methylimidazolium group can be used as highly efficient anion exchangers with high thermal stability and good chemical stability for adsorption of Cr(VI), Re(VII), Ce(IV). P-SILs prepared via simple impregnation afforded IL functionalized solvent impregnated resins (SIRs) which showed high separation efficiency and selectivity in the separation of rare earths(III) (REs(III)). SM-SILs prepared via sol-gel method with IL doped in the support as porogens or extractant show high removal efficiencies and excellent stability for the separation of RE(III), Cr(III) and Cr(VI). M-SILs with IL as plasticizer or carrier show improved stability, high perme- ability coefficient and good selectivity for Cr(VI) transport. Different supports and different supporting methods were suffi- ciently compared. Based on the different practical application, different forms of SILs can be prepared for separation of rare metals with high separation efficiency and selectivity.     

Densities and refractive indices of imidazolium- and phosphonium-based ionic liquids: Effect of temperature,alkyl chain length,and anion

A systematic study of densities and refractive indices of 17 room temperature ionic liquids is presented at four different temperatures ranging from 293 K to 333 K. The ionic liquids are grouped into four families: 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide, [C_nmim][Ntf₂], ionic liquids (with n = 2, 4, 6, 8, 10, 12, and 14); 1-alkyl-3-methylimidazolium hexafluorophosphate, [C_nmim][PF₆], ionic liquids (with n = 4, 6, 8); ionic liquids based on the trihexyl(tetradecyl)phosphonium cation, [P_{6 6 6 14}], combined with the anions bis(trifluoromethylsulfonyl)amide, [Ntf₂], acetate, [OAc], and triflate, [OTf]; and [C₄mim]-based ionic liquids combined with the anions [OAc], [OTf], methylsulfate [MeSO₄], and tetrafluoroborate [BF₄]. The data obtained were analysed to determine the effect of (i) temperature, (ii) the alkyl chain length of the 1-alkyl-3-methylimidazolium cation, and (iii) the nature of the anion. Different empirical models for the calculation of the densities of the ionic liquids were tested. Molar refractions were also calculated from the volumetric and refractive index data and the values were discussed with the aim of checking their utility in obtaining insights on the intermolecular forces and behaviour in solution of the different ionic liquids.     

Tetraalkylphosphonium-based ionic liquids

Ionic liquids are salts that are liquid at or near room temperature. Their wide liquid range, good thermal stability, and very low vapor pressure make them attractive for numerous applications. The general approach to creating ionic liquids is to employ a large, unreactive, low symmetry cation with and an anion that largely controls the physical and chemical properties. The most common cations used in ionic liquids are N-alkylpyridinium and N,N′-dialkylimidazolium. Another very effective cation for the creation of ionic liquids is tetraalkylphosphonium, [PR₁R₂R₃R₄]⁺. The alkyl groups, R_n, generally are large and not all the same. The halide salts of several phosphonium cations are available as starting materials for metathesis reactions used to prepare ionic liquids. The large phosphonium cations can combine with relatively large anions to make viscous but free flowing liquids with formula mass greater than 1000 g mol⁻¹. Some other more massive salts are waxes and glasses. The synthesis and the physical, chemical, and optical properties of phosphonium-ionic liquids having anions with a wide range of masses were measured and are reported here.     

Enantioseparation of mandelic acid enantiomers in ionic liquid aqueous two-phase extraction systems

In the past decade, ionic liquids have received great attention owing to their potential as green solvent alternatives to conventional organic solvents. In this work, hydrophobic achiral ionic liquids (1-butyl-3-methylimidazolium-hexafluorophosphate([bmim][PF₆]), 1-octyl-3-methylimidazolium tetrafluoroborate([omim][BF₄])) were used as solvents in chiral liquid-liquid extraction separation of mandelic acid (MA) enantiomers with β-cyclodextrin (β-CD) derivatives as hydrophilic chiral selectors preferentially forming complexes with (R)-enantiomers. Factors affecting the separation efficiency were optimised, namely the type of the extraction solvents and β-CD derivatives, concentrations of the β-CD derivatives and MA enantiomers, pH, and temperature. Excellent enantioseparation of MA enantiomers was achieved in the ionic liquid aqueous two-phase extraction systems under the optimal conditions of pH 2.5 and temperature of 5°C with the maximum enantioselectivity (α) of 1.74. The experimental results demonstrated that the ionic liquid aqueous two-phase extraction systems with a β-CD derivative as the chiral selector have a strong chiral recognition ability, which might extend the application of ionic liquids in chiral separation.     

一类新型酯类离子液体的合成

以氯乙酸乙酯和氮杂环化合物(1-甲基咪唑、吡啶、N-乙基哌啶、N-甲基吗啉)为原料, 采用两步法合成了一类新型的酯类离子液体, 对合成的12个化合物进行了元素分析, ¹H NMR谱和一些物理性质的测定. 大多数化合物的熔点低于100 ℃, 为室温离子液体. 所合成离子液体的热稳定范围都比较宽, 性质稳定.     

Recent progress of task‐specific ionic liquids in chiral resolution and extraction of biological samples and metal ions

Ionic liquids have been functionalized for modern applications. The functional ionic liquids are also called task‐specific ionic liquids. Various task‐specific ionic liquids with certain groups have been constructed and exploited widely in the field of separation. To take advantage of their properties in separation science, task‐specific ionic liquids are generally used in techniques such as liquid–liquid extraction, solid‐phase extraction, gas chromatography, high‐performance liquid chromatography, and capillary electrophoresis. This review mainly covers original research papers published in the last five years, and we will focus on task‐specific ionic liquids as the chiral selectors in chiral resolution and as extractant or sensor for biological samples and metal ion purification.     

A Simple Method for Determination of Homologue Imidazolium Cations in Ionic Liquids Using IC with Direct Conductivity Detection

An investigation was carried out into the fast determination of five homologue imidazolium cations in ionic liquids by ion chromatography using a cation-exchange column and direct conductivity detection. Ethylenediamine, complex organic acid (citric acid, oxalic acid and tartaric acid) and organic modifiers (acetonitrile) were used as mobile phase. The influences of the eluent types, eluent concentration, eluent pH and column temperature on separation of the cations were discussed. Simultaneous separation and determination of the five homologue imidazolium cations in ionic liquids were achieved under an optimum condition. The optimized mobile phase was consisted of 0.25 mmol L^?1 ethylenediamine + 0.5 mmol L^?1 citric acid + 3% acetonitrile (v/v) (pH 4.1), set at a flow rate of 1.0 mL min^?1. The column temperature was 40 °C and detection limits were obtained in the range of 1.1–45.6 mg L^?1. The relative standard deviations of the chromatographic peak areas for the cations were <3.0% (n = 5). This method was successfully applied to separate imidazolium cations in ionic liquids produced by organic synthesis. The recoveries of spiked components were 92.5–101.9%.     

离子液体作添加剂对高效液相色谱分离植物激素的影响

探讨了以离子液体作为液相色谱流动相添加剂,对植物激素赤霉素GA3、生长素IAA和脱落酸ABA的分离的影响,以及离子液体的烷烃链长度,阴离子及离子液体的浓度对分离的影响。结果表明:咪唑阳离子和植物激素通过静电作用而保留;植物激素本身的pKa值影响其保留因子,pKa值增大,离子液体浓度对植物激素保留因子影响增大;另外随[BMIM]对应的阴离子电负性的减小,植物激素的保留因子明显地增大;同时植物激素的空间位阻也影响其分离。     

Selective separation of aromatic hydrocarbons through supported liquid membranes based on ionic liquids

Ionic liquids are emerging as alternative solvents for volatile organic compounds traditionally used in liquid–liquid extraction and liquid membrane separation. In this paper, we examine whether room-temperature ionic liquids as a membrane solution can be utilized for hydrocarbon separation by using a supported liquid membrane. Aromatic hydrocarbons, benzene, toluene and p-xylene were successfully transported through the membrane based on the ionic liquids. Although the permeation rates through the membrane based on the ionic liquids were less than those of water, the selectivity of aromatic hydrocarbons was greatly improved. The maximum selectivity to heptane was obtained using benzene in the aromatic permeation and 1-n-butyl-3-methylimidazolium hexafluorophosphate in the liquid membrane phase.     

Al[18F]F-HBED-CC-radiolabeling in a media of protic alkanolammonium ionic liquids

The possibility of Al¹⁸F-radiolabeling of molecules with the N,N'-bis[2-hydroxy-5-(2-carboxyethyl)benzyl]ethylenediamine-N, N'-diacetic acid motif in the medium of protic alkanolammonium ionic liquids is reported for the first time. Ionic liquids containing triethanolammonium or triisopropanolammonium cations proved to be the most promising. High values of radiochemical conversion were achieved using the minimum amount of the precursor.     

Efficient and eco-friendly synthesis of dihydropyrimidinones, bis(indolyl)methanes, and N-alkyl and N-arylimides in ionic liquids

Dihydropyrimidinones, bis(indolyl)methanes, and N-alkyl and N-arylimides were synthesized efficiently under mild reaction conditions in the presence of two types of ionic liquids. In each section, effects of different ILs on the yield of reactions were investigated. The use of ionic liquids offer improvements for the synthesis of title compounds with regard to the yield of products, simplicity in operation, short reaction times and green aspects by avoiding toxic catalyst and organic solvents.     

Determination of Homologue Imidazolium Ionic Liquid Cations by Ion Chromatography Using a Carboxyl Acid Cation-Exchange Column with Direct Conductivity Detection

An investigation into the determination of four imidazolium ionic liquid cations by ion chromatography using a carboxyl acid cation exchange column and direct conductivity detection was carried out. This research has developed a simple, selective, and accurate ion chromatographic method for separation of imidazolium ionic liquid cations. Detection limits (S/N = 3) for the cations were 3.2–24.3 mg/L. Relative standard deviations (RSD, n = 5) for peak areas were less than 1.6%. The method has been successfully applied to the determination of two ionic liquids synthesized by organic chemistry lab.     

Indirect ultraviolet detection of alkaline earth metal ions using an imidazolium ionic liquid as an ultraviolet absorption reagent in ion chromatography

A convenient and versatile method was developed for the separation and detection of alkaline earth metal ions by ion chromatography with indirect UV detection. The chromatographic separation of Mg²⁺, Ca²⁺, and Sr²⁺ was performed on a carboxylic acid base cation exchange column using imidazolium ionic liquid/acid as the mobile phase, in which the imidazolium ionic liquid acted as an UV‐absorption reagent. The effects of imidazolium ionic liquids, detection wavelength, acids in the mobile phase, and column temperature on the retention of Mg²⁺, Ca²⁺, and Sr²⁺ were investigated. The main factors influencing the separation and detection were the background UV absorption reagent and the concentration of hydrogen ion in ion chromatography with indirect UV detection. The successful separation and detection of Mg²⁺, Ca²⁺, and Sr²⁺ within 14 min were achieved using the selected chromatographic conditions, and the detection limits (S /N = 3) were 0.06, 0.12, and 0.23 mg/L, respectively. A new separation and detection method of alkaline earth metal ions by ion chromatography with indirect UV detection was developed, and the application range of ionic liquids was expanded.     

The Ethylbenzene/Styrene Preferential Separation with Ionic Liquids in Liquid–Liquid Extraction

The objective of this work was to explore the feasibility of using ionic liquids (ILs), namely N-ethyl-N-methylmorpholinium dicyanamide, [EMMor][DCA], (3-hydroxypropyl)-1-methylmorpholinium dicyanamide, [N-C₃OHMMor][DCA], 1-(3-hydroxypropyl)-3-methylimidazolium dicyanamide, [N-C₃OHMIM][DCA], 1-(3-hydroxypropyl)pyridinium dicyanamide, [N-C₃OHPy][DCA], (3-cyanopropyl)pyridinium dicyanamide, [N-C₃CNPy][DCA], and (3-cyanopropyl)methylpyrrolidinium dicyanamide, [N-C₃CNMPyr][DCA] for the separation of ethylbenzene and styrene. The liquid–liquid equilibrium (LLE) data in ternary systems of {IL (1)?+?styrene (2)?+?ethylbenzene (3)} at T?=?298.15 K and ambient pressure is presented for the six ILs synthesized by us. The final chromatography analysis of the composition of tie-lines has shown that the studied ILs are not found in the raffinate phase and they show interesting results on the selectivity and solute distribution ratio for styrene extraction. A comparison of different ILs is presented for the studied separation problem. It was observed that the best separation selectivities were found for [N-C₃CNPy][DCA] (S_Av?=?2.38) and [N-C₃OHMMor][DCA] (S_Av?=?2.42) in comparison with other studied ILs in this work and those presented in the literature. While the data presented here are useful from a theoretical standpoint, the possibility of applications for these ILs in technological processes is questionable because of low solute distribution ratios, especially those calculated from the masses [N-C₃CNPy][DCA] (β_MAv?=?0.08) and [N-C₃OHMMor][DCA] (β_MAv?=?0.07). The experimental tie-lines were correlated with the non-random two liquid NRTL model.     

Synthesis of symmetrical and unsymmetrical 3,3-di(indolyl)indolin-2-ones under controlled catalysis of ionic liquids

Three ionic liquids, [BMIM][BF₄] doped with 60 mol % of LiCl ([BMIM][BF₄]-LiCl), N,N,N,N-tetramethylguanidinium trifluoroacetate (TMGT), and N,N,N,N-tetramethylguanidinium triflate (TMGT_f) were found useful as catalyst solvents for controlled 3-indolylation of isatins. Our investigation revealed that the reaction between isatin and indoles in [BMIM][BF₄]-LiCl or TMGT_f media stops at the step of addition of the two components providing 3-indolyl-3-hydroxyindolin-2-ones while the ionic liquid TMGT runs the reaction further through accompanying Friedel-Crafts substitution to afford symmetrical 3,3-di(indol-3-yl)indolin-2-ones. To take advantage of the difference between the effects of these ionic liquids on the reaction progress, we planned a two-step protocol for the efficient synthesis of unsymmetrical 3,3-di(indol-3-yl)indolin-2-ones.     

Room-Temperature Synthesis of the Bi5[GaCl4]3 Salt From Three Different Classes of Ionic Liquids

Following the development in the synthesis of subvalent cluster compounds, we report on the use of three different classes of room-temperature ionic liquids for the synthesis of the pentabismuth-tris(tetragallate) salt, Bi₅[GaCl₄]₃, characterized by X-ray diffraction. The Bi₅[GaCl₄]₃ salt was prepared by reduction of BiCl₃ using gallium metal in ionic liquid reaction media containing a strong Lewis acid, GaCl₃. The ionic liquids; trihexyltetradecyl phosphonium chloride [Th-Td-P⁺]Cl^?, 1-dodecyl-3-methylimidazolium chloride [Dod-Me-Im⁺]Cl^? and N-butyl-N-methylpyrrolidinium chloride [Bu-Me-Pyrr⁺]Cl^? from three of the main classes of ionic liquids were used in synthesis. Reactions using ionic liquids composed of the trihexyltetradecyl phosphonium cation [Th-Td-P⁺] and the anions; tetrafluoroborate [BF₄ ^?], bis(trifluoro-methyl sulfonyl) imide [(Tf)₂N^?] and hexafluorophosphate [PF₆ ^?] were also investigated.