Adsorption of Cl−, Br−, and I− ions from 0.1 M solutions in methanol on Ga, (In-Ga), and (Tl-Ga) electrodes

Adsorption of Cl^?, Br^?, and I^? (Hal^?) ions from 0.1 M solutions in methanol (MeOH) is studied on the liquid renewable Ga, (In-Ga), and (Tl-Ga) electrodes by the methods of differential capacitance and jet electrode. It is shown that the adsorption parameters and the series of surface activity of halide ions in MeOH essentially depend on the metal nature. On the (In-Ga) and (Tl-Ga) electrodes, as well as on the Hg electrode, the surface activity of halide ions increases in the series: Cl^? < Br^? < I^?; on the Ga electrode, it varies in another series: Br^? < Cl^? < I^?. The data for the Ga/MeOH interface support the result, which was first obtained on the Ga/N-methyl formamide (N-MF) interface, that the effect of inversion of surface activity series can be observed not only in the aprotic solvents, but also in the protic solvents. The data, which were obtained in MeOH, are compared with the corresponding data, which were obtained in N-MF, dimethyl formamide (DMF), acetonitrile (AN), and water. For Ga, (In-Ga), and (Tl-Ga) electrodes, the adsorption of Hal^? varies in the series: H₂O < MeOH ≈ N-MF < DMF < AN. The data obtained in MeOH indicate that the energy of metal-Hal^? interaction (ΔG _M-Hal) increases in the series (Tl-Ga) < (In-Ga) < Ga as the electronic work function increases. This is in agreement with the data, which were obtained in other solvents, and is the evidence for the donor-acceptor nature of metal-Hal^? interaction, where the Hal^? ions are the donors of electron pair with respect to the metal.     

Electrochemical determination of iodide by poly(3-aminophenylboronic acid) film electrode at moderately low pH ranges

A new potentiometric sensor for the determination of iodide based on poly(3-aminophenylboronic acid) (PAPBA) film electrode was constructed. Poly(3-Aminophenylboronic acid) films were synthesized electrochemically on platinum electrode by cyclic voltammetry. The effect of film thickness, pH, and preconditioning parameters on the electrode performance were examined. The analytical performance was evaluated and linear calibration graphs were obtained in the concentration range of 10⁻⁶ to 10⁻¹ M iodide ion. The limit of detection was found to be 8 × 10⁻⁷ M. The response time of the sensor was 5 s and its lifetime is about one week. To check the selectivity of the PAPBA film for iodide ion, potential interferences such as Cl⁻, Br⁻, F⁻, CN⁻, IO₃⁻, Ca²⁺, and Mg²⁺ were tested. The PAPBA electrode was also employed as a sensing platform for the determination of iodide ions in commercial table salt.     

Electrical double layer in surface-inactive electrolyte solution and adsorption of halide ions from 0.1 M solutions on liquid Cd–Ga and In–Ga alloys in gamma-butyrolactone

The double-layer characteristics of liquid renewable Cd–Ga (0.3 at % Cd) and In–Ga (14.2 at % In) electrodes in the gamma-butyrolactone (GBL) solutions of various electrolytes are studied by measuring the differential capacitance and using the method of open-circuit jet electrode. For the (Cd–Ga)/GBL and (In–Ga)/GBL interfaces, the zero-charge potentials, which are not distorted by the specific adsorption of ions, and the chemisorption potential drops of solvent are determined. It is shown that, in spite of the fact that the work function decreases as we pass from (In–Ga) to (Cd–Ga), the chemisorption potential drops of solvent on both electrodes are close. This behavior is explained by a closer approach of GBL dipoles to the surface of (Cd-Ga) electrode providing more effective overlapping of donor–acceptor levels of metal and solvent. It is shown that, in GBL, the adsorption parameters of halide ions and their surface activity series depend on the metal nature. On the (Cd–Ga) and (In–Ga) electrodes, the reversed surface activity series of halide ions is observed: on the Hg electrode in various solvents, the surface activity increases in the series Cl^– < Br^– < I^–, whereas on the (Cd–Ga) and (In–Ga) electrodes in GBL, it varies in the reverse series I^– < Br^– < Cl^–.     

Solvated positron chemistry. II. The reaction of hydrated positrons with Cl−, Br− and I− ions

The reaction of the hydrated positron, e_aq⁺ with Cl^?, Br^?, and I^? ions in aqueous solutions was studied by means of positron The measured angular correlation curves for [Cl^?, e⁺], [Br^?, e⁺, and [I^?, e⁺] bound states were in good agreement with th Because of this agreement and the fact that the calculated positron wavefunctions penetrate far outside the X^? ions in the [X^?, e⁺] sta propose that a bubble is formed around the [X^?, e⁺] state, similar to the Ps bubble found in nearly all liquids. F^?ions did not react w Preliminary results showed that CN^? ions react with e_aq⁺ while OH^?ions are non reactive. The rate constants were 3.9 × 10¹⁰ M^?1 s^?1, 4.4 × 10¹⁰ M^?1 s^?1, and 6.3 × 10¹⁰ M^?1 s^?1 for Cl^?, Br^?, and I^?, respectively, at low (? 0.03 M) X^? concentrations. A 25% decrease in the rate constant caused by the addition of 1 M ethanol to the I^? solutions was i The influence of halide ions on the positronium (Ps) yields in pure water was studied by use of lifetime measurements. The Cl^?, Br^?, and I^? ions reduced the Ps yields at low concentrations (? 0.03 M), while F^? ions only reduced the Ps-yield However, the Ps yields saturated (e.g. at ≈ 21% ortho-Ps yield in the Cl^? case) at higher concentrations. This saturation and the high-concentration effects-in the angular correlation results were interpreted as caused by rather complicated spur effects, wh It is proposed that spur electrons may pick off the positron from the [X^?, e⁺ states with an efficiency which depends on the structure of the     

Comparison study of adsorption of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions from dimethyl formamide on In-Ga and Tl-Ga electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions on the renewable liquid In-Ga and Tl-Ga electrodes from 0.1 M solutions in dimethyl formamide (DMF) is investigated by using the method of differential capacitance measurements. The results are compared with similar data obtained on Hg and Ga electrodes in DMF and with the corresponding data obtained in acetonitrile (AN). It is shown that, in DMF, the adsorption parameters and the series of surface activity of halide ions (Hal⁻) significantly depend on the metal nature. In contrast to Hg electrode, on which the surface activity of halide ions increases in the series: Cl⁻ < Br⁻ < I⁻, on In-Ga, as well as on the Ga electrode, it varies in the reverse order: I⁻ < Br⁻ < Cl⁻, whereas on the Tl-Ga electrode, partially reversed series of surface activity is observed: Br⁻ < I⁻ < Cl⁻. The results are explained within the framework of Andersen-Bockris model. An analysis of experimental results leads to the following qualitative conclusions: (1) on the In-Ga and Tl-Ga electrodes, as well as on Ga electrode, free energy of metal-Hal⁻ interaction ( $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) increases in series I⁻ < Br⁻ < Cl⁻; (2) for Cl⁻, Br⁻, and I⁻, $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) grows in series Tl-Ga < In-Ga < Ga; (3) an absolute magnitude of $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } (Hal₁⁻, and Hal₂⁻ are any ions of Cl⁻, Br⁻, and I⁻) increases in series Hg < Tl-Ga < In-Ga < Ga; (4) the metal-DMF chemisorption interaction is much stronger than the metal-AN interaction and increases in series Tl-Ga < In-Ga < Ga.     

Colorimetric response of spiropyran derivative for anions in aqueous or organic media

We previously found that a simple spiropyran derivative (1:1′,3′,3′-trimethyl-6-nitro-spiro-[2H-1-benzopyran-2,2′-indoline]) behaves as a selective and sensitive cyanide anion (CN⁻) receptor in aqueous media under UV irradiation¹³. The receptor, when irradiated by UV light in a water/MeCN mixture, creates a CN⁻-selective absorption band via a nucleophilic addition of CN⁻ to 1 (formation of the 1-CN⁻ species) and allows quantitative determination of very low levels of CN⁻. In the present work, effects of pH and water content on the response of 1 to anions were studied to clarify the detailed properties of 1. In aqueous media, 1 reacts selectively with CN⁻regardless of pH and water content, but the reaction is suppressed by a decrease in pH and an increase in water content due to the protonation of CN⁻. In contrast, in pure MeCN, addition of F⁻ also creates a new absorption band, as does CN⁻. This is promoted via a nucleophilic interaction between 1 and F⁻ in a 1:2 stoichiometry (formation of the 1-2F⁻ species). The 1-CN⁻ and 1-2F⁻ species have different photochemical properties; the 1-CN⁻ species is stable upon UV irradiation, while the UV irradiation of the 1-2F⁻ species leads to a decomposition of the spiropyran platform.     

A colorimetric tetrathiafulvalene-calix[4]pyrrole anion sensor

The interaction and colorimetric sensing properties of a tetrathiafulvalene substituted calix[4]pyrrole sensor with anions were investigated using ¹H NMR and absorption spectroscopic techniques. Visual color changes were observed upon addition of different anions (Cl⁻, Br⁻, CN⁻, and AcO⁻) to a solution of the sensor.     

Fluorescent sensor based on dimesitylborylthiophene derivative for probing fluoride and cyanide

A new D-π-A dimesitylboron derivative with terminal phenothiazine bridged by fluorenevinyl (PFTB) has been synthesized. It was found that PFTB could selectively recognize fluoride and cyanide anions by naked eyes. Upon addition of F⁻ and CN⁻, the color of the solution of PFTB in DCM turned to yellowish-green from yellow and strong green emitting was observed under UV light, while the emission of PFTB in DCM was weak. Moreover, the presence of 10 equiv of tetrabutylammonium salts of other anions, such as Cl⁻, Br⁻, I⁻, AcO⁻, HSO₄⁻, H₂PO₄⁻, could not lead to obvious changes of the UV–vis absorption and the fluorescent emission spectra of PFTB. The detection limits of PFTB towards F⁻ and CN⁻ were 7.52×10⁻⁸ mol/L and 6.12×10⁻⁸ mol/L in DCM, respectively. Therefore, the D-π-A type triarylborane derivatives can be used as ‘turn on’ fluorescent sensors for detecting F⁻ and CN⁻.     

Chemistry of Ruthenium Polypyridine Complexes: VI. Synthesis and Photochemistry of cis-[Ru(bpy)2(bipy)X]q Complexes

Complexes cis-[Ru(bpy)₂(bipy)(X)] ^{n +} [bpy = 2,2'-bipyridyl, bipy = 4,4'-bipyridyl, X = Br^-, ONO^-, CN^- (n = 1); MeCN, PPh₃ (n = 2), and NO⁺ (n = 3)] were synthesized. Irradiation of acetonitrile solutions of the complexes with X = Cl^-, Br^-, ONO^-, NO₂-, CN^-, NH₃, MeCN, and PPh₃ by visible light results in photosubstitution of 4,4'-bipyridyl by a solvent molecule. The electronic absorption spectra of the complexes were assigned on the basis of quantum-chemical calculations. A correlation was revealed between photolysis quantum yields and charges transferred from ligands X upon their coordination.     

Nuclear magnetic resonance spectroscopic study on ionic liquids of 1-alkyl-3-methylimidazolium salts

Chemical shifts of ¹H and ¹³C NMR of series of methylimidazolium salts (MIM⁺, X=Br⁻, BF₄⁻ and PF₆⁻) function on the length of alkyl groups on the ring, type of solvents and the concentration. The bromides series demonstrate more chemical shift variation on H2 upon the change of solvents and concentration. Unexpected H-D exchange reactions were also observed in the MIM⁺Br⁻ by using CD₃OD and D₂O. The exchange rates strongly depend on the length of the alkyl group, which could cause more steric factor to reduce the interaction between deuterium atom from solvent and C2 of the ring.     

Open-Framework Rubidium Halides Incorporated in Cadmium Oxalate Host Lattices

The metathetic reaction between CdBr₂ and rubidium oxalate under hydrothermal conditions yields [RbBr] [Cd₆(C₂O₄)₆]·2H₂O, I, containing Cd₆O₂₄ clusters with the Br⁻ ions in the center. The RbBr moiety forms a three-dimensional Fm3m structure, but with a unit cell double that of the normal stable phase. The hydrothermal reaction between rubidium oxalate and CdCl₂ in the presence of NO⁻₃ ions gives [Rb₂Cd(NO₃)(Cl)(C₂O₄)(H₂O)], II, containing cadmium chloro-oxalate layers. The Rb⁺ ions present between the layers interact with the Cl atoms to form a one-dimensional RbCl chain decorated by NO⁻₃ groups.     

Calix[2]furano[2]pyrrole and related compounds as the neutral carrier in silver ion-selective electrode

The performance of calix[2]furano[2]pyrrole and related compounds used as neutral carriers for silver selective polymeric membrane electrode was investigated. The silver ion-selective electrode based on calix[2]furano[2]pyrroles gave a good Nernstian response of 57.1 mV per decade for silver ion in the activity range 1×10⁻⁶ to 1×10⁻² M. The present silver ion-selective electrode displayed very good selectivity for Ag⁺ ion against alkali and alkaline earth metal ions, NH₄⁺, and H⁺. In particular, the present Ag⁺-selective electrode exhibited very low responses towards Hg²⁺ and Pb²⁺ ions. The potentiometric selectivity coefficients of the silver ion-selective electrode exhibited a strong dependence on the solution pH. In particular, the response of the electrode to the Hg²⁺ activity was greatly diminished at pH 2.5 compared to that at pH 5.0. Overall, the performance of the present silver ion-selective electrode based on the ionophore, calix[2]furano[2]pyrrole, is very comparable to that of the electrode prepared with the commercially available neutral carrier in terms of slope, linear range, and detection limits.     

A fluoride selective dipyrromethane-TCNQ colorimetric sensor based on charge-transfer

A colorimetric sensor based on dipyrromethane(donor)-7,7′,8,8′-tetracyanoquinodimethane (acceptor) charge-transfer compound depicts excellent selectivity for naked-eye as well as spectrophotometric determination of F⁻ even in co-existence with other halide ions (Cl⁻, Br⁻ and I⁻). The sensing mechanism is ascribed to the interrupted charge-transfer between donor-acceptor in the presence of F⁻. The sensing on solid support mimics the solution sensing process supported by the reflectance values. Thus this compound has potential for practical applications.     

Voltammetric determination of mercury (II) in aqueous media using glassy carbon electrodes modified with novel calix[4]arene

A novel calix[4]arene derivative containing benzothiazole group was coated on glassy carbon electrode (GCE) and then applied to the recognition of mercury ion. Cyclic and square wave voltammetric results showed that the modified electrode selectively recognizes Hg²⁺ ion in aqueous media. A new anodic stripping peak at −0.3 V (vs. Ag/Ag⁺) can be obtained by scanning the potential from −0.6 to 0.6 V, and the peak currents are proportional to the Hg²⁺ concentration. The modified electrode in a 0.1 M H₂SO₄+0.01 M NaCl solution shows linear voltammetric response in the range of 25-300 μg l⁻¹ and detection limit of 5 μg l⁻¹ (ca. 2.5×10⁻⁸ M). This modified GCE does not present any significant interference from alkali, alkaline and transition metal ions except for Pb²⁺, Ag⁺ and Cu²⁺ ions. Only 500, 50 and 100-fold molar excess of Pb²⁺, Ag⁺ and Cu²⁺ ions, respectively, can lead to voltammetric response comparable with that of Hg²⁺. The proposed method was successfully applied to determine mercury in natural water.     

Orthogonal array design for the optimization of hollow fiber protected liquid-phase microextraction of salicylates from environmental waters

A new fluorescent probe for the detection of F⁻ (TBA⁺ and Na⁺ salts) has been developed, which is based on a desilylation triggered chromogenic reaction in water. This probe exhibits excellent F⁻ ion selectivity as well as significant color changes visible to the naked eye at the concentration of 1.5 mg L⁻¹, the WHO recommended level of F⁻ ions in drinking water. This new carbohydrate modified probe can be used directly in aqueous medium without using organic co-solvents. Furthermore, the probe presents high sensitivity and selectivity for the imaging of F⁻ ions in HepG2 cells.     

Potentiometric response mechanism of a poly(acrylamide)-phthalocyaninato tin(II) film coated platinum electrode in acetonitrile and N,N-dimethylacetamide.

A new sensor constructed by a platinum electrode coated with a non-plasticized poly(acrylamide) polymer (PAA) film coupled with phthalocyaninato tin(II) ([Sn(II)(pc)]) was developed. The potentiometric response behavior of this PAA-[Sn(II)(pc)] electrode for such anions as CN-, F-, Cl-, and Br- in dimethylacetamide and acetonitrile were investigated. The electrode showed a Nernstian response to CN- and F- and a quite poor response to Cl- and Br-. The mechanism of the peculiar selective response was studied by cyclic voltammetric and spectrophotometric methods. The voltammetric investigation suggested that the charge of the host compound in the sensor membrane had no effect on the potential response of the electrode. It was also found by a spectrophotometric investigation that the complexing of [Sn(II)(pc)] with CN- and F- lead to the selective response of the electrode. The motive force of the complexing was considered to be a ligand exchange of CN- or F- with molecules at the axial site of [Sn(II)(pc)] due to solvent effects to the interest anions.     

Organotin compounds: an ionophore system for fluoride ion recognition

Ion-selective properties were established for membrane electrodes prepared by using organotin compounds of type (L^CNRSnF₂)_n, (R = n-Bu (I), = Ph (II)) and (L^CNSnF₃)_n (III) (L^CN = C₆H₄(CH₂NMe₂)-2). Electrodes formulated with the optimized membranes containing the organotin compounds I-III as ionophores and sodium tetraphenylborate (10-30%) exhibited high selectivity for fluoride over other anions. An electrode prepared with ionophore II using dibutyl phthalate as the plasticizer and 15% sodium tetraphenylborate (NaTPB) as anion additive, possesses the best potentiometric response characteristics. It shows a detection limit of 7.9 × 10⁻⁷ M with a slope of 62.7 mV decade⁻¹ of activity in buffer solutions of pH 5.5. The interference from other anions is suppressed under this optimized measurement conditions. An entirely non-Hofmeister selectivity sequence (F⁻ > CH₃COO⁻ > Cl⁻ > I⁻ ∼ Br⁻ >ClO₄⁻ > NO₂⁻ > NO₃⁻ > SCN⁻) with remarkable preference towards fluoride is obtained. The influence on the electrode performances by anion additive was studied, and the possible response mechanism was investigated by UV-vis spectra. The electrode has been used for direct determination of fluoride in drinking mineral water with satisfactory results.     

Detailed dynamics of three-body recombination of ions in central collisions

The potential energy surface describing quantitatively the dynamics of the collision induced dissociation reactions CsBr + Xe → Cs⁺ + Br⁻ + Xe, CsXe⁺ + Br⁻ is used to explore detailed dynamics of the reverse process of direct three-body recombination of the Cs⁺ and Br⁻ ions undergoing a central collision. For a stepwise analysis of the course of the elementary process, visualization of the trajectory and of the energy state of each pair of the particles is employed. Several different mechanisms of the reaction are found. Their occurrence depends on the impact parameter of the collision of the third body with the recombining pair and on the angles determining the spatial orientation of the ion velocities. The major role in stabilization of the recombination products is played by the repulsion potentials between the ions and the third body, but the amount of energy transferred depends not only on the repulsion interaction strength. Recombination is shown to be able to happen for very low energies of repulsion between the third body and the ions and even in the complete absence of repulsion. In all the cases, the particular recombination mechanism is determined by the dynamical features of the collision. The relation between the kinematic parameters of a collision of the three particles and the recombination mechanism is considered.     

Selection of entrainers in the 1-hexene/n-hexane system with a limited solubility

Vapor-liquid equilibria (VLE) have been measured for five 1-hexene/n-hexane/ionic liquid systems and 1-hexene/n-hexane/NMP (N-methyl-2-pyrrolidone) system with a headspace-gas chromatography (HSGC) apparatus at 333.15 K. The ionic liquids investigated were 1,3-dimethylimidazolium tetrafluoroborate [C₂MIM]⁺[BF₄]⁻, 1-butyl-3-methylimidazolium tetrafluoroborate [C₄MIM]⁺[BF₄]⁻, 1-methyl-3-octylimidazolium tetrafluoroborate [C₈MIM]⁺[BF₄]⁻, 1,3-dimethylimidazolium dicyanamide [C₂MIM]⁺[N(CN)₂]⁻ and 1-octylquinolinium bis(trifluoromethylsulfonyl)amide [C₈Chin]⁺[BTA]⁻. It was found that at low feeding concentration of 1-hexene and n-hexane, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ > [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ > [C₈MIM]⁺[BF₄]⁻ > [C₈Chin]⁺[BTA]⁻, which is consistent with the priori prediction of the COSMO-RS (conductor-like screening model for real solvents) model. But at high feeding concentration, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ < [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ < [C₈MIM]⁺[BF₄]⁻ < [C₈Chin]⁺[BTA]⁻. The liquid demixing effect should be taken into account. The activity coefficients of 1-hexene and n-hexane at infinite dilution calculated with the COSMO-RS model were correlated using the NRTL, Wilson and UNIQUAC model. In this work the predictive results from the COSMO-RS model and UNIFAC model for the 1-hexene/n-hexane and 1-hexene/n-hexane/NMP systems were compared. The UNIFAC model is one of the most important academic contributions by Prof. Jürgen Gmehling.     

The Application of Cryptand 22 as a Bifunctional Stationary Phase for Ion Chromatography

Poly (styrene/divinyl benzene) with cryptand 22 as an anchoring group was synthesized and applied as a bifunctional packing material for the separation of both cations and anions. At pH < 2, the resin can be protonated and applied as an anion exchanger for the separation of anions; with water as eluent, inorganic anions such as F^?, Cl^?, Br^?, NO₃^?”, I^? were well separated. After deprotonation at pH> 10, the resin became a cation exchanger and successfully separated alkali metal ions such as Li⁺, K⁺ and Cs⁺ with methanol as eluent. The effects of solvents, flow rate and temperature on the separation of various ions were also investigated.