A pseudo-ligand approach to virtual screening

A virtual screening method is presented that is grounded on a receptor-derived pharmacophore model termed "virtual ligand" or "pseudo-ligand". The model represents an idealized constellation of potential ligand sites that interact with residues of the binding pocket. For rapid virtual screening of compound libraries the potential pharmacophore points of the virtual ligand are encoded as an alignment-free correlation vector, avoiding spatial alignment of pharmacophore features between the pharmacophore query (i.e., the virtual ligand) and the candidate molecule. The method was successfully applied to retrieving factor Xa inhibitors from a Ugi three-component combinatorial library, and yielded high enrichment of actives in a retrospective search for cyclooxygenase-2 (COX-2) inhibitors. The approach provides a concept for "de-orphanizing" potential drug targets and identifying ligands for hitherto unexplored or allosteric binding pockets.     

Parallel screening and activity profiling with HIV protease inhibitor pharmacophore models

Parallel Screening has been introduced as an in silico method to predict the potential biological activities of compounds by screening them with a multitude of pharmacophore models. This study presents an early application example employing a Pipeline Pilot-based screening platform for automatic large-scale virtual activity profiling. An extensive set of HIV protease inhibitor pharmacophore models was used to screen a selection of active and inactive compounds. Furthermore, we aimed to address the usually critically eyed point, whether it is possible in a parallel screening system to differentiate between similar molecules/molecules acting on closely related proteins, and therefore we incorporated a collection of other protease inhibitors including aspartic protease inhibitors. The results of the screening experiments show a clear trend toward most extensive retrieval of known active ligands, followed by the general protease inhibitors and lowest recovery of inactive compounds.     

Comparative analysis of pharmacophore screening tools

The pharmacophore concept is of central importance in computer-aided drug design (CADD) mainly because of its successful application in medicinal chemistry and, in particular, high-throughput virtual screening (HTVS). The simplicity of the pharmacophore definition enables the complexity of molecular interactions between ligand and receptor to be reduced to a handful set of features. With many pharmacophore screening softwares available, it is of the utmost interest to explore the behavior of these tools when applied to different biological systems. In this work, we present a comparative analysis of eight pharmacophore screening algorithms (Catalyst, Unity, LigandScout, Phase, Pharao, MOE, Pharmer, and POT) for their use in typical HTVS campaigns against four different biological targets by using default settings. The results herein presented show how the performance of each pharmacophore screening tool might be specifically related to factors such as the characteristics of the binding pocket, the use of specific pharmacophore features, and the use of these techniques in specific steps/contexts of the drug discovery pipeline. Algorithms with rmsd-based scoring functions are able to predict more compound poses correctly as overlay-based scoring functions. However, the ratio of correctly predicted compound poses versus incorrectly predicted poses is better for overlay-based scoring functions that also ensure better performances in compound library enrichments. While the ensemble of these observations can be used to choose the most appropriate class of algorithm for specific virtual screening projects, we remarked that pharmacophore algorithms are often equally good, and in this respect, we also analyzed how pharmacophore algorithms can be combined together in order to increase the success of hit compound identification. This study provides a valuable benchmark set for further developments in the field of pharmacophore search algorithms, e.g., by using pose predictions and compound library enrichment criteria.     

Pharmacophore modeling and parallel screening for PPAR ligands

We describe the generation and validation of pharmacophore models for PPARs, as well as a large scale validation of the parallel screening approach by screening PPAR ligands against a large database of structure-based models. A large test set of 357 PPAR ligands was screened against 48 PPAR models to determine the best models for agonists of PPAR-alpha, PPAR-delta, and PPAR-gamma. Afterwards, a parallel screen was performed using the 357 PPAR ligands and 47 structure-based models for PPARs, which were integrated into a 1537 models comprising in-house pharmacophore database, to assess the enrichment of PPAR ligands within the PPAR hypotheses. For these purposes, we categorized the 1537 database models into 181 protein targets and developed a score that ranks the retrieved targets for each ligand. Thus, we tried to find out if the concept of parallel screening is able to predict the correct pharmacological target for a set of compounds. The PPAR target was ranked first more often than any other target. This confirms the ability of parallel screening to forecast the pharmacological active target for a set of compounds.     

SHAFTS: a hybrid approach for 3D molecular similarity calculation. 1. Method and assessment of virtual screening

We developed a novel approach called SHAFTS (SHApe-FeaTure Similarity) for 3D molecular similarity calculation and ligand-based virtual screening. SHAFTS adopts a hybrid similarity metric combined with molecular shape and colored (labeled) chemistry groups annotated by pharmacophore features for 3D similarity calculation and ranking, which is designed to integrate the strength of pharmacophore matching and volumetric overlay approaches. A feature triplet hashing method is used for fast molecular alignment poses enumeration, and the optimal superposition between the target and the query molecules can be prioritized by calculating corresponding "hybrid similarities". SHAFTS is suitable for large-scale virtual screening with single or multiple bioactive compounds as the query "templates" regardless of whether corresponding experimentally determined conformations are available. Two public test sets (DUD and Jain's sets) including active and decoy molecules from a panel of useful drug targets were adopted to evaluate the virtual screening performance. SHAFTS outperformed several other widely used virtual screening methods in terms of enrichment of known active compounds as well as novel chemotypes, thereby indicating its robustness in hit compounds identification and potential of scaffold hopping in virtual screening.     

Using pharmacophore models to gain insight into structural binding and virtual screening: an application study with CDK2 and human DHFR

This study provides results from two case studies involving the application of the HypoGenRefine algorithm within Catalyst for the automated generation of excluded volume from ligand information alone. A limitation of pharmacophore feature hypothesis alone is that activity prediction is based purely on the presence and arrangement of pharmacophoric features; steric effects remained unaccounted. Recently reported studies have illustrated the usefulness of combining excluded volumes to the pharmacophore models. In general, these excluded volumes attempt to penalize molecules occupying steric regions that are not occupied by active molecules. The HypoGenRefine algorithm in Catalyst accounts for steric effects on activity, based on the targeted addition of excluded volume features to the pharmacophores. The automated inclusion of excluded volumes to pharmacophore models has been applied to two systems: CDK2 and human DHFR. These studies are used as examples to illustrate how ligands could bind in the protein active site with respect to allowed and disallowed binding regions. Additionally, automated refinement of the pharmacophore with these excluded volume features provides a more selective model to reduce false positives and a better enrichment rate in virtual screening.     

Ligand-based virtual screening by novelty detection with self-organizing maps

We describe a novel method for ligand-based virtual screening, based on utilizing Self-Organizing Maps (SOM) as a novelty detection device. Novelty detection (or one-class classification) refers to the attempt of identifying patterns that do not belong to the space covered by a given data set. In ligand-based virtual screening, chemical structures perceived as novel lie outside the known activity space and can therefore be discarded from further investigation. In this context, the concept of "novel structure" refers to a compound, which is unlikely to share the activity of the query structures. Compounds not perceived as "novel" are suspected to share the activity of the query structures. Nowadays, various databases contain active structures but access to compounds which have been found to be inactive in a biological assay is limited. This work addresses this problem via novelty detection, which does not require proven inactive compounds. The structures are described by spatial autocorrelation functions weighted by atomic physicochemical properties. Different methods for selecting a subset of targets from a larger set are discussed. A comparison with similarity search based on Daylight fingerprints followed by data fusion is presented. The two methods complement each other to a large extent. In a retrospective screening of the WOMBAT database novelty detection with SOM gave enrichment factors between 105 and 462-an improvement over the similarity search based on Daylight fingerprints between 25% and 100%, when the 100 top ranked structures were considered. Novelty detection with SOM is applicable (1) to improve the retrieval of potentially active compounds also in concert with other virtual screening methods; (2) as a library design tool for discarding a large number of compounds, which are unlikely to possess a given biological activity; and (3) for selecting a small number of potentially active compounds from a large data set.     

MED-SuMoLig: a new ligand-based screening tool for efficient scaffold hopping

The identification of small molecules with selective bioactivity, whether intended as potential therapeutics or as tools for experimental research, is central to progress in medicine and in the life sciences. To facilitate such study, we have developed a ligand-based program well-suited for effective screening of large compound collections. This package, MED-SuMoLig, combines a SMARTS-driven substructure search aiming at 3D pharmacophore profiling and computation of the local atomic density of the compared molecules. The screening utility was then investigated using 52 diverse active molecules (against CDK2, Factor Xa, HIV-1 protease, neuraminidase, ribonuclease A, and thymidine kinase) merged to a library of about 40,000 putative inactive (druglike) compounds. In all cases, the program recovered more than half of the actives in the top 3% of the screened library. We also compared the performance of MED-SuMoLig with that of ChemMine or of ROCS and found that MED-SuMoLig outperformed both methods for CDK2 and Factor Xa in terms of enrichment rates or performed equally well for the other targets.     

Pharmacophore and docking-based virtual screening approach for the design of new dual inhibitors of Janus kinase 1 and Janus kinase 2

Janus kinase 1 and 2, non-receptor protein tyrosine kinases, are implicated in various cancerous diseases. Involvement of these two enzymes in the pathways that stimulate cell proliferation in cancerous conditions makes them potential therapeutic targets for designing new dual-targeted agents for the treatment of cancer. In the present study, two separate pharmacophore models were developed and the best models for JAK1 (AAADH.25) and JAK2 (ADRR.92) were selected on the basis of their external predictive ability. Both models were subjected to a systematic virtual screening (VS) protocol using a PHASE database of 1.5 million molecules. The hits retrieved in VS were investigated for ADME properties to avoid selection of molecules with a poor pharmacokinetic profile. The molecules considered to be within the range of acceptable limits of ADME properties were further employed for docking simulations with JAK1 and JAK2 proteins to explore the final hits that possess structural features of both pharmacophore models as well as display essential interactions with both of them. Thus, the new molecules obtained in this way should show inhibitory activity against JAK1 and JAK2 and may serve as novel therapeutic agents for the treatment of cancerous disease conditions.     

Fast and efficient in silico 3D screening: toward maximum computational efficiency of pharmacophore-based and shape-based approaches

In continuation of our recent studies on the quality of conformational models generated with CATALYST and OMEGA we present a large-scale survey focusing on the impact of conformational model quality and several screening parameters on pharmacophore-based and shape-based virtual high throughput screening (vHTS). Therefore, we collected known active compounds of CDK2, p38 MAPK, PPAR-gamma, and factor Xa and built a set of druglike decoys using ilib:diverse. Subsequently, we generated 3D structures using CORINA and also calculated conformational models for all compounds using CAESAR, CATALYST FAST, and OMEGA. A widespread set of 103 structure-based pharmacophore models was developed with LigandScout for virtual screening with CATALYST. The performance of both database search modes (FAST and BEST flexible database search) as well as the fit value calculation procedures (FAST and BEST fit) available in CATALYST were analyzed in terms of their ability to discriminate between active and inactive compounds and in terms of efficiency. Moreover, these results are put in direct comparison to the performance of the shape-based virtual screening platform ROCS. Our results prove that high enrichment rates are not necessarily in conflict with efficient vHTS settings: In most of the experiments, we obtained the highest yield of actives in the hit list when parameter sets for the fastest search algorithm were used.     

Three-dimensional pharmacophore modeling of liver-X receptor agonists

High cholesterol levels contribute to hyperlipidemia. Liver X receptors (LXRs) are the drug targets. LXRs regulate the cholesterol absorption, biosynthesis, transportation, and metabolism. Novel agonists of LXR, especially LXRβ, are attractive solutions for treating hyperlipidemia. In order to discover novel LXRβ agonists, a three-dimensional pharmacophore model was built based upon known LXRβ agonists. The model was validated with a test set, a virtual screening experiment, and the FlexX docking approach. Results show that the model is capable of predicting a LXRβ agonist activity. Ligand-based virtual screening results can be refined by cross-linking by structure-based approaches. This is because two ligands that are mapped in the same way to the same pharmacophore model may have significantly different binding behaviors in the receptor's binding pocket. This paper reports our approach to identify reliable pharmacophore models through combining both ligand- and structure-based approaches.     

Pharmacophore modelling,virtual screening and molecular docking studies on PLD1 inhibitors

Lipid metabolism plays a significant role in influenza virus replication and subsequent infection. The regulatory mechanism governing lipid metabolism and viral replication is not properly understood to date, but both Phospholipase D (PLD1 and PLD2) activities are stimulated in viral infection. In vitro studies indicate that chemical inhibition of PLD1 delays viral entry and reduction of viral loads. The current study reports a three-dimensional pharmacophore model based on 35 known PLD1 inhibitors. A sub-set of 25 compounds was selected as the training set and the remaining 10 compounds were kept in the test set. One hundred and twelve pharmacophore models were generated; a six-featured pharmacophore model (AADDHR.57) with survival score (2.69) produced a statistically significant three-dimensional quantitative structure–activity relationship model with r² = 0.97 (internal training set), r² = 0.71 (internal test set) and Q² = 0.64. The predictive power of the pharmacophore model was validated with an external test set (r² = 0.73) and a systematic virtual screening work-flow was employed showing an enrichment factor of 23.68 at the top 2% of the dataset (active and decoys). Finally, the model was used for screening of the filtered PubChem database to fetch molecules which can be proposed as potential PLD1 inhibitors for blocking influenza infection.     

On the value of homology models for virtual screening: discovering hCXCR3 antagonists by pharmacophore-based and structure-based approaches

Human chemokine receptor CXCR3 (hCXCR3) antagonists have potential therapeutic applications as antivirus, antitumor, and anti-inflammatory agents. A novel virtual screening protocol, which combines pharmacophore-based and structure-based approaches, was proposed. A three-dimensional QSAR pharmacophore model and a structure-based docking model were built to virtually screen for hCXCR3 antagonists. The hCXCR3 antagonist binding site was constructed by homology modeling and molecular dynamics (MD) simulation. By combining the structure-based and ligand-based screenings results, 95% of the compounds satisfied either pharmacophore or docking score criteria and would be chosen as hits if the union of the two searches was taken. The false negative rates were 15% for the pharmacophore model, 14% for the homology model, and 5% for the combined model. Therefore, the consistency of the pharmacophore model and the structural binding model is 219/273 = 80%. The hit rate for the virtual screening protocol is 273/286 = 95%. This work demonstrated that the quality of both the pharmacophore model and homology model can be measured by the consistency of the two models, and the false negatives in virtual screening can be reduced by combining two virtual screening approaches.     

Pharmacophore identification, in silico screening, and virtual library design for inhibitors of the human factor Xa

Factor Xa inhibitors are innovative anticoagulant agents that provide a better safety/efficacy profile compared to other anticoagulative drugs. A chemical feature-based modeling approach was applied to identify crucial pharmacophore patterns from 3D crystal structures of inhibitors bound to human factor Xa (Pdb entries 1fjs, 1kns, 1eqz) using the software LIGANDSCOUT and CATALYST. The complex structures were selected regarding the criteria of high inhibitory potency (i.e. all ligands show K(i) values against factor Xa in the subnanomolar range) and good resolution (i.e. at least 2.2 A) in order to generate selective and high quality pharmacophore models. The resulting chemical-feature based hypotheses were used for virtual screening of commercial molecular databases such as the WDI database. Furthermore, a ligand-based molecular modeling approach was performed to obtain common-feature hypotheses that represent the relevant chemical interactions between 10 bioactive factor Xa inhibitors and the protein, respectively. In a next step a virtual combinatorial library was designed in order to generate new compounds with similar chemical and spatial properties as known inhibitors. The software tool ILIB DIVERSE was used for this procedure in order to provide new scaffolds of this group of anticoagulants. Finally we present the combination of these two techniques, hence virtual screening was performed with selective pharmacophore models in a focused virtual combinatorial database. De novo derived molecular scaffolds that were able to adequately satisfy the pharmacophore criteria are revealed and are promising templates for candidates for further development.