Solvation of the Electrolytic Components of Seawater

A new modification of the adiabatic compressibility method of investigating solvation in solutions is presented and applied to the analysis of the following structurally-related characteristics of hydrated complexes of seawater electrolytes (NaCl, KCl, MgCl₂, CaCl₂, Na₂SO₄, MgSO₄) at different concentrations (0.1 to 5.0 mol⋅kg⁻¹) and temperatures (278.15 to 308.15 K): solvation numbers (h) and their dependences on concentration, volumes of stoichiometric mixtures of ions without their hydration shells (V _2h ), compressibilities (β _1h ) and molar volumes of water in their solvation shells (V _1h ), their dependences on concentration and temperature, etc.     

Characterizing polymer macrostructures by identifying and locating microstructures along their chains with the kerr effect

In this brief report, we demonstrate that Kerr effect measurements, which determine the excess birefringence contributed by polymer solutes in dilute solutions observed under a strong electric field, are highly sensitive to and capable of determining their microstructures, as well as their locations along the macromolecular backbone. Specifically, using atactic triblock copolymers with the same overall composition of styrene (S) and p-bromostyrene (pBrS) units, but with two different block arrangements, that is, pBrS₉₀-b-S₁₂₀-b-pBrS₉₀ (I) and S₆₀-b-pBrS₁₈₀-b-S₆₀ (II), which are indistinguishable by NMR, we detected a dramatic difference in their molar Kerr constants (_mK), in agreement with those previously estimated. Although similar in magnitude, their Kerr constants differ in sign, with _mK(II) positive and _mK(I) negative. In addition, S/pBrS random and gradient copolymers synthesized by reversible addition-fragmentation chain-transfer (RAFT) polymerization exhibit a heretofore unexpected enhanced enchainment of racemic (r) pBrS-pBrS diads. Comparison of their observed and calculated _mKs suggests that the gradient S/pBrS copolymers possess an unanticipated additional gradient in stereosequence that parallels their comonomer gradient, that is, as the concentration of pBrs units decreases from one end of the copolymer chain to the other, so does the content of r diads. This conclusion could only be reached by comparison of observed and calculated Kerr effects, which access the global properties of macromolecules, and not NMR, which is only sensitive to local polymer structural environments, but not to their locations on the copolymer chains. Molar Kerr constants are characteristic of entire polymer chains and are highly sensitive to their constituent microstructures and their distribution along the chain. They may be used to both identify constituent microstructures and locate them along the polymer chain, thereby enabling, for the first time, characterization of their complete macrostructures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

On the Nature of the 7-Norbornadienyllithiums. Preliminary Communication

Lithium reductions of 7-chloronorbornadiene and of bis(7-norbornadienyl)mercury both provide (C₇H₇)₂Li₂ ( 5a ). This product is accompanied by C₇H₇Li₂Cl ( 5c ) in the first case, and by C₇H₇Li ( 5b ) in the second. The theoretically anticipated properties of all three organolithiums are apparent in the consistent C_s symmetry of their hydrocarbon ligands, their protolytic destruction by 12-crown-4, and their significant J(C(7), Li) ( 5a , 7.6; 5b , 16.0; 5c 8.9 Hz).     

Melting behavior of poly(tetrahydrofuran)-S and their blends

Melting behavior of poly(tetrahydrofuran)-s (PTHF) and their blend with different molecular masses has been studied by TM-DSC. PTHF and their blend show two endothermic peaks on their curve. The melting peak temperatures T _m1 and T _m2, entropy of fusion ΔS _f1 and ΔS _f2, and mean relaxation time for melting τ_f1 and τ_f2 have been estimated, and their dependence on the molecular mass has been examined. Plots of Tm1 to the reciprocal of their molecular mass fit a simple equation (T _m=a-b/M _n). Plots of T _m2 to their molecular mass also fit the equation with different factors. There seems to be a boundary around molecular mass 1200 in the molecular mass dependence of ΔS _fand τ_f. Effect of blending appeared on the τ_f and the non-reversing heat flow. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis of Halochromates with Inorganic Stable Complex Cations: New,Mild and Efficient Oxidants

The halochromates of general formulas of [M(en) ₃ ][XCrO ₃ ] ₃ (X = Cl,F; M = Co,Cr) and [Co(NH ₃ ) ₆ ][XCrO ₃ ] ₃ (X = Cl,F) were prepared and characterized by IR spectroscopy and elemental analysis. These oxidants were examined for oxidizing some alcohols to their aldehydes and ketones and their oxidizing ability was compared with other relevant oxidants.     

Synthesis,characterization and antiprotozoal studies of some metal complexes of antimalarial drugs

Metal complexes of the antimalarials trimethoprim (TMP), chloroquine (CQ), and pyrimethamine (pyrm) formulated as [Mn(TMP)Cl₂(CH₃OH)], [Co(TMP)₂Cl₂(CH₃OH)], [Pt(CQ)₂Cl₂] and [Cu(pyrm)₂(CH₃COO)₂] have been synthesized and characterized by elemental analysis, magnetic susceptibility measurements, IR and UV-Vis spectroscopy. The IR and electronic spectra are consistent with the proposed geometry for the complexes. The Mn(II) and Pt(II) complexes are four coordinate while the Cu(II) and Co(II) have octahedral geometry. The complexes were tested for in vitro activity against cultures of Trypanosoma cruzi, L. donovani, T. b. rhodesiense and the resistant strains of Plasmodium falciparum to determine their antiprotozoal activities and for their cytotoxicity with L-6 cells. The Pt(II) complex of chloroquine showed enhanced activity against the resistant strain of Plasmodium falciparum.     

Synthesis of poly(phenylacetylene)s containing trifluoromethyl groups for gas permeable membrane

Poly(phenylacetylene)s containing trifluoromethyl groups on their benzene rings were synthesized, and gas permeation behaviors of their films were examined. Permeability coefficients for O₂ and N₂, diffusion selectivity (D_o2/D_N2) and solubility selectivity (SO₂/SN₂) were estimated. The gas permeability of polymer films were found to be enhanced remarkably with introduction of trifluoromethyl groups into the polymers: poly[2,4,5-tris(trifluoromethyl)phenylacetylene], Po₂ = 7.8 × 10^?8 [cm³ (STP) cm cm^?2 s^?1 cm Hg^?1], Po₂/PN₂ = 2.1. The relationship between the polymer structures and their gas permeability was discussed.     

Relating the Composition of PtxRu100−x/C Nanoparticles to Their Structural Aspects and Electrocatalytic Activities in the Methanol Oxidation Reaction

A controlled composition‐based method—that is, the microwave‐assisted ethylene glycol (MEG) method—was successfully developed to prepare bimetallic Pt_xRu_100?x/C nanoparticles (NPs) with different alloy compositions. This study highlights the impact of the variation in alloy composition of Pt_xRu_100?x/C NPs on their alloying extent (structure) and subsequently their catalytic activity towards the methanol oxidation reaction (MOR). The alloying extent of these Pt_xRu_100?x/C NPs has a strong influence on their Pt d‐band vacancy and Pt electroactive surface area (Pt ECSA); this relationship was systematically evaluated by using X‐ray absorption (XAS), scanning electron microscopy (SEM) coupled with energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), density functional theory (DFT) calculations, and electrochemical analyses. The MOR activity depends on two effects that act in cooperation, namely, the number of active Pt sites and their activity. Here the number of active Pt sites is associated with the Pt ECSA value, whereas the Pt‐site activity is associated with the alloying extent and Pt d‐band vacancy (electronic) effects. Among the Pt_xRu_100?x/C NPs with various Pt:Ru atomic ratios (x=25, 50, and 75), the Pt₇₅Ru₂₅/C NPs were shown to be superior in MOR activity on account of their favorable alloying extent, Pt d‐band vacancy, and Pt ECSA. This short study brings new insight into probing the synergistic effect on the surface reactivity of the Pt_xRu_100?x/C NPs, and possibly other bimetallic Pt‐based alloy NPs.     

Structure of Framework Aluminum Lewis Sites and Perturbed Aluminum Atoms in Zeolites as Determined by 27Al{1H} REDOR (3Q) MAS NMR Spectroscopy and DFT/Molecular Mechanics

Zeolites are highly important heterogeneous catalysts. Besides Brønsted SiOHAl acid sites, also framework Al_FR Lewis acid sites are often found in their H‐forms. The formation of Al_FR Lewis sites in zeolites is a key issue regarding their selectivity in acid‐catalyzed reactions. The local structures of Al_FR Lewis sites in dehydrated zeolites and their precursors—“perturbed” Al_FR atoms in hydrated zeolites—were studied by high‐resolution MAS NMR and FTIR spectroscopy and DFT/MM calculations. Perturbed framework Al atoms correspond to (SiO)₃AlOH groups and are characterized by a broad ²⁷Al NMR resonance (δ_i=59–62 ppm, C_Q=5 MHz, and η=0.3–0.4) with a shoulder at 40 ppm in the ²⁷Al MAS NMR spectrum. Dehydroxylation of (SiO)₃AlOH occurs at mild temperatures and leads to the formation of Al_FR Lewis sites tricoordinated to the zeolite framework. Al atoms of these (SiO)₃Al Lewis sites exhibit an extremely broad ²⁷Al NMR resonance (δ_i≈67 ppm, C_Q≈20 MHz, and η≈0.1).     

Relationship Between the J(Sn–C–H) of the Dimethyltin Dichloride Adducts of some Pyridines and Anilines,and the Donor Strength of the Lewis Bases

A study by titrimetric methods of the donor strength of pyridine and aniline and some of their para -substituted derivatives, and the J (¹¹⁹Sn–C–H) of their adducts with dimethyltin dichloride in nitrobenzene, has shown that the p K _b of a Lewis base and its para -substituted derivatives varies linearly with the J (¹¹⁹Sn–C–H) of the adducts of dimethyltin dichloride (Me₂SnCl₂), with the Lewis base dissolved in an inert solvent. A graphical plot of the p K _b of a given series of Lewis bases versus the J (Sn–C–H) of their complexes with Me₂SnCl₂ in nitrobenzene (at the same temperature, and same complex concentration) gives a straight line with a negative gradient, making possible the deduction of the other parameter (e.g. p K _b) for a Lewis base in the series, where the one parameter (e.g. J (Sn–C–H) is known. The graph for each series of Lewis base has its own characteristic gradient, and the gradients appear proportional in magnitude to the donor strengths of each class of the bases, making it possible to deduce from such graphs which series of Lewis bases are the stronger donors.     

Glass transformation temperatures of polymers of olefin oxides and olefin sulfides

A number of polymers belonging to poly(olefin oxide) and poly(olefin sulfide) series have been prepared and their glass transformation temperatures determined by dilatometry and differential thermal analysis. In the poly(olefin oxide) series, the T_g remained practically unchanged as the length of the pendent alkyl group was increased from methyl to n-hexyl. However, a 20°C decrease in T_g was observed when the pendent group was changed from ethoxymethyl to n-hexoxymethyl. In the poly-(olefin sulfide) series, the T_g value decreased as the pendent alkyl group changes from methyl to ethyl. Replacement of ether oxygen in the polymer main chain by sulfide sulfur increased the T_g value. In some polymers, first-order transitions were observed, but their significance has not been assessed.     

Disila‐Galaxolide and Derivatives: Synthesis and Olfactory Characterization of Silicon‐Containing Derivatives of the Musk Odorant Galaxolide

A series of silicon‐containing derivatives of the polycyclic musk odorant galaxolide ( 4 a ) was synthesized, that is, disila‐galaxolide ((4RS,7SR)‐ 4 b /(4RS,7RS)‐ 4 b ), its methylene derivative rac‐ 9 , and its nor analogue rac‐ 10 . The tricyclic title compounds with their 7,8‐dihydro‐6,8‐disila‐6 H‐cyclopenta[g]isochromane skeleton were prepared in multistep syntheses by using a cobalt‐catalyzed [2+2+2] cycloaddition of the mono‐ yne H₂C?CHCH₂OCH₂C?CB(pin) (B(pin)=4,4,5,5‐tetramethyl‐1,3,2‐di‐ oxaborolan‐2‐yl) with the diynes H₂C?C[Si(CH₃)₂C?CH]₂ or H₂C‐ [Si(CH₃)₂C?CH]₂ as the key step. Employing [Cr(CO)₃(MeCN)₃] as an auxiliary, the disila‐galaxolide diastereomers (4RS,7SR)‐ 4 b and (4RS,7RS)‐ 4 b could be chromatographically separated through their tricarbonylchromium(0) complexes, followed by oxidative decomplexation. The identity of the title compounds and their precursors was established by elemental analyses and multinuclear NMR spectroscopic studies and in some cases additionally by crystal structure analyses. Compounds (4RS,7SR)‐ 4 b , (4RS,7RS)‐ 4 b , rac‐ 9 , and rac‐ 10 were characterized for their olfactory properties, including GC‐olfactory studies of the racemic compounds on a chiral stationary phase. As for the parent galaxolide stereoisomers 4 a , only one enantiomer of the silicon compounds (4RS,7SR)‐ 4 b , (4RS,7RS)‐ 4 b , rac‐ 9 , and rac‐ 10 , smelt upon enantioselective GC‐olfactometry, which according to the elution sequence is assumed to be also (4S)‐configured as in the case of the galaxolide stereoisomers. The disila‐analogues (4S,7R)‐ 4 b and (4S,7S)‐ 4 b were, however, about one order of magnitude less intense in terms of their odor threshold than their parent carbon compounds (4S,7R)‐ 4 a and (4S,7S)‐ 4 a . The introduction of a 7‐methylene group in disila‐galaxolide ( 4 b →rac‐ 9 ) improved the odor threshold by a factor of two. With the novel silicon‐containing galaxolide derivatives, the presumed hydrophobic bulk binding pocket of the corresponding musk receptor(s) could be characterized in more detail, which could be useful for the design of novel musk odorants with an improved environmental profile.     

Synthesis and Characterization of Ag8(Ge1−x,Snx)(S6−y,Sey) Colloidal Nanocrystals

A facile colloidal approach to synthesize Ag₈(Ge_1?x,Sn_x)(S_6?y,Se_y) nanocrystals (NCs) in a highly controlled way across the entire compositional ranges (0≤x≤1, 0≤y≤6) has been developed. The NCs exhibit a uniform size distribution, highly crystalline structure, over 1 g scalable synthesis, and tunable band gaps in the range of 0.88–1.45 eV by varying their chemical compositions. The Ag₈GeS₆ NCs with a band gap of approximately 1.45 eV were employed as a model light harvester to assess their applicability in solar cells by a full solution‐processing device, yielding an efficiency of 0.28 % under AM1.5 illumination, demonstrating their application potential in solar energy utilization.     

Hydrothermal synthesis and structures of two zero-dimensional zinc phosphate polymorphs

Two polymorphs of zero-dimensional zinc phosphate with the formula, ⁰_∞[Zn(2,2′-bipy)(H₂PO₄)₂], have been synthesized employing hydrothermal technique and their structure determined by single crystal X-ray diffraction. Both the structures consists of ZnO₃N₂ distorted trigonal-bipyramidal and PO₂(OH)₂ tetrahedral units linked through their vertices giving rise to a zero-dimensional molecular zinc phosphate. The structures are stabilized by extensive hydrogen bond interactions between zero-dimensional monomers. The structures display subtle differences in their packing created by hydrogen bond interactions. Crystal data: polymorph I, triclinic, space group (No. 2), , , , α=67.32(3)°, β=81.67(3)°, γ=69.29(3)°, , Z=2; polymorph II, triclinic, space group (No. 2), , , , α=97.37(2)°, β=100.54(2)°, γ=100.98(2)°, , Z=2.     

Synthesis and Characterization of Dichlorotin(IV)trithiophosphates and Their Adducts with Nitrogen Donor Bases

Abstract

Dichlorotin(IV)trithiophosphates [(RO)P(S)S ₂ ]SnCl ₂ were prepared by the reaction of methanolic solution of SnCl ₄ and dipotassium salt of trithiophosphates in a 1:1 molar ratio and their adducts [(RO)P(S)S ₂ ]SnCl _2.N ₂ C ₁₂ H ₈ and [(RO)P(S)S ₂ ]SnCl _2.N ₂ C ₁₀ H ₈ were prepared by the reaction of methanolic solution of [(RO)P(S)S ₂ ]SnCl ₂ and N-donor bases in a 1:1 molar ratio. These newly synthesised derivatives have been characterized by elemental analysis; molecular weight measurements; and IR, ¹³ C, ³¹ p and ¹¹⁹ Sn NMR spectral studies. Coordination number of four and six was suggested for dichlorotin (IV)trithiophosphates and their adducts with N-donor bases respectively.     

Metal-containing monomers. Part 1. Spatial and electronic structures of cobalt(II) and nickel(II) complexes with acrylamide and of their polymers

Summary The spatial and electronic structures of the complexes [Co(AAm)₄(H₂O)₂](NO₃)₂ (1), Co(AAm)₄Cl₂ (2), [Ni(AAm)₄(H₂O)₂](NO₃)₂ (3) and Ni(AAm)₄Cl₂ (4), where AAm is acrylamide, and the products of their radical, frontal and post-grafting polymerization have been studied by electronic spectroscopy. The complexes (1), (3) and (4) were found to have pseudooctahedral structures in both the solid and solution phases. A change in the spatial structure of complex (2) was established in going from the crystal (tetragonally distorted octahedral) to solution (tetrahedral). The coordination environment of the metal centre does not change markedly during polymerization of the metal-containing monomers.     

Crystal structures of the novel hydrated borates Ba2B5O9(OH), Sr2B5O9(OH) and Li2Sr8B22O41(OH)2

Three novel hydrated borates Ba₂B₅O₉(OH) (1), Sr₂B₅O₉(OH) (2) and Li₂Sr₈B₂₂O₄₁(OH)₂ (3) have been synthesized hydrothermally and their structures determined. Compounds (1) and (2) are isostructural, crystallizing in space group P2₁/c and having lattice parameters of a=6.6330(13) Å, b=8.6250(17) Å, c=14.680(3) Å, β=93.46(3)° and a=6.4970(13) Å, b=8.4180(17) Å, c=14.177(3) Å, β=94.35(3)°, respectively. Compound (3) crystallizes in P-1 with lattice parameters of a=6.4684(13) Å, b=8.4513(17) Å, c=14.881(3) Å, α=101.21(3)°, β=93.96(3)°, γ=90.67(3)°. While similar in their axis lengths, (3) differs greatly in structure and formulation from (1) and (2). The structure of (1) and (2) is contrasted to that of the well-known mineral hilgardite (Ca₂B₅O₉Cl·H₂O).     

Preparation, Structure, and Thermal Decomposition of Co(II) Complexeswith 2,3- and 2,5-Dichlorobenzoic Acid and Imidazole

Summary.  The reaction products of Co(II)-2,3- and -2,5-dichlorobenzoate with imidazole (1, 2; CoL ₂⋯2imdċ2H₂O, L=C₇H₃Cl₂O, imd=imidazole) were characterized by their spectroscopic and thermochemical properties. The compounds crystallize in the monoclonic system with space group = P2₁/c, a=13.848(3), b=12.841(3) ?, c= 7.064(2) ?, β=98.12 °, V=1243.5(4) ?³, Z=2 for 1 and space group =P2₁/n, a=13.293(3), b= 6.964(2), c=13.800(3) ?, β=108.92(3) °, V=1208.6(4) ?³, Z=2 for 2. The complexes lose their crystal water in one step at 333 K and subsequently decompose to CoO with intermediate formation of Co₃O₄. Received August 9, 1999. Accepted (revised) February 11, 2000     

Morphology-dependent luminescence properties of poly(benzyl ether) dendrimers

Poly(benzyl ether) dendrimers with o-, m-, and p-isomers of dialkoxybenzene at their focal points [o-, m-, and p-(Gn)₂Ar], having generation numbers (n) of 0–3, were synthesized. ¹H NMR pulse relaxation times (T₁) of the exterior MeO groups of o- and m-(Gn)₂Ar (n = 0–3) all remained in the range of 0.92–1.43 s. In sharp contrast, an exceptionally short T₁ value (0.23 s) was observed for p-(G3)₂Ar. Although their absorption spectral profiles were slightly different from one another, an essential difference was observed for their fluorescence properties. When the generation number was increased, the fluorescence efficiency of o-(Gn)₂Ar increased, but that of p-(Gn)₂Ar decreased, whereas m-(Gn)₂Ar exhibited a relatively small change in the fluorescence efficiency. Fluorescence depolarization studies showed a highly efficient intramolecular energy migration in p-(G3)₂Ar as compared with o-(G3)₂Ar and m-(G3)₂Ar. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3524–3530, 2003     

Generation and capture of methyl(vinyl)silanone

Methyl(vinyl)dichlorosilane reacts with DMSO in the presence of hexamethyldisiloxane to give the corresponding linear oligosiloxanes of the general formula Me₃Si(OSiMeVin) _n OSiMe₃ (n=1–6) as well as MeSi(OSiMe₃)₃ and Me₃Si(MeOSiVin) _m OSi(OSiMe₃)(Me)OSiMe₃ (m=1–2). The same reaction in the presence of chlorotrimethylsilane results in oligomers of the general formula Me₃Si(OSiMeVin) _n Cl (n=1–3). A possible scheme of their formation is discussed. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1614–1616, August, 1998.