Studies on the synthesis of (+/-)-stenine: a combined intramolecular [4 + 2]-cycloaddition/rearrangement cascade

Several cyclic 2-(methylthio)-5-amidofurans containing tethered unsaturation were prepared via the reaction of dimethyl(methylthio)sulfonium tetrafluoroborate (DMSTF) with beta-alkoxy-gamma-dithiane lactams. Thermolysis of these furans resulted in an intramolecular Diels-Alder reaction (IMDAF). The resulting oxa-bridge cycloadducts underwent a subsequent 1,2-methylthio shift to form tricyclic lactams in high yield. Furan 9, annealed to an azepine ring, underwent the IMDAF reaction at or below room temperature. Conformational effects imposed by the placement of a carbonyl group within the tether, combined with a rotational bias about the C(2)-N bond, enhances the rate of the IMDAF reaction of the seven-ring system so that it occurs readily at 25 degrees C. The feasibility of using the cascade sequence in the context of a total synthesis of the Stemona alkaloid (+/-)-stenine was explored. The eventual synthesis of (+/-)-stenine was carried out by an intramolecular Diels-Alder reaction of a 2-amido-5-methylthio-substituted furan containing a trans-pent-3-enoic acid methyl ester side chain in order to create the desired azepinoindole skeleton. This was followed by a series of reductions to set the syn-anti stereochemical relationship at the incipient ring fusion sites present in stenine. All six stereocenters at the azepinoindole core were derived in high stereoselectivity from the functionality present in the rearranged cycloadduct 10. Compound 10 was converted to stenine in 11 additional steps via a sequence that features a Crabtree's-catalyst directed hydrogenation, iodolactonization, and a Keck allylation.     

Intramolecular Diels-Alder reaction of 2-diphenylphosphinyl-5-(propargyloxymethyl)furans followed by nucleophilic 1,2-rearrangement of the phosphinyl group

The base-catalyzed intramolecular Diels-Alder reactions of 2-diphenylphosphinyl-5-(propargyloxymethyl)furans 2a-e gave the tetrahydrofuran ring annulated o-diphenylphosphinophenols 3a-e in 70-80% yields, a novel reaction involving an intramolecular Diels-Alder reaction of furan diene with allenyl ether dienophile followed by a nucleophilic 1,2-rearrangement of the diphenylphosphinyl group.     

Methylsulfenylation of thioacetals as a method for synthesizing 2-thio-substituted furans

[formula: see text] The dimethyl(methylthio)sulfonium tetrafluoroborate induced cyclization of various bis(methylsulfanyl) carbonyl compounds is described. The reaction proceeds by methylthiolation of the thioacetal group to give a thionium ion which undergoes subsequent cyclization with the neighboring carbonyl group. This is followed by an elimination reaction to furnish the furan ring.     

Several convenient methods for the synthesis of 2-amido substituted furans

Several new methods for the synthesis of differently substituted 2-amidofurans are described. The thermolysis of furan-2-carbonyl azide results in a Curtius rearrangement and the resulting furanyl isocyanate was trapped with various organometallic reagents. A second method consists of a C-N cross-coupling reaction of a bromo-substituted furan with various amides, carbamates, and lactams. The CuI-catalyzed cross-coupling reaction between furanyl bromides and amides furnished 2- and 3-substituted amidofurans in 45-95% yield. The third protocol used involves the reaction of cyclic carbinol amides with triflic anhydride. The reaction proceeds under very mild conditions to provide alpha-(trifluoromethyl)sulfonamido-substituted furans in high yield. The resulting iminium ion derived from the reaction of the hydroxy pyrrolidinone with Tf(2)O undergoes a facile ring opening as a consequence of the adjacent hydroxyl group to produce an imino triflate intermediate. Subsequent cyclization of this highly electrophilic imine with the oxygen atom of the adjacent carbonyl group leads to an imino dihydrofuran that reacts further with another equivalent of Tf(2)O to give the observed product.     

Interplay of structure and reactivity in a most unusual furan Diels-Alder reaction

Difluorinated alkenoate ethyl 3,3-difluoro-2-(N,N-diethylcarbamoyloxy)-2-propenoate reacts rapidly and in high yield with furan and a range of substituted furans in the presence of a tin(IV) catalyst. Non-fluorinated congener 2-(N,N-diethylcarbamoyloxy)-2-propenoate fails to react at all under the same conditions. These reactions have been explored using density functional theory (DFT) calculations. They reveal a highly polar transition state, which is stabilized by the Lewis acid catalyst SnCl(4) and by polar solvents. In the presence of both catalyst and solvent, a two-step reaction is predicted, corresponding to the stepwise formation of the two new carbon-carbon bonds via transition states which have similar energies in all cases. Our experimental observations of the lack of reaction of the non-fluorinated dienophile, the stereochemical outcomes, and the rate acceleration accompanying furan methylation are all well predicted by our calculations. The calculated free energy barriers generally correlate well with measured reaction rates, supporting a reaction mechanism in which zwitterionic character is developed strongly. An in situ ring opening reaction of exo-cycloadduct ethyl exo-2-(N,N-diethylcarbamoyloxy)-3,3-difluoro-7-oxabicyclo[2.2.1]hept-5-enyl-2-endo-carboxylate, which results in the formation of cyclic carbonate ethyl 4,4-difluoro-5-hydroxy-2-oxo-5,7a-dihydro-4H-benzo[1,3]dioxole-3a-carboxylate by a Curtin-Hammett mechanism, has also been examined. Substantial steric opposition to Lewis acid binding prevents carbonate formation from 2-substituted furans.     

Synthesis of furo[3,4-c]furans using a rhodium(II)-catalyzed cyclization/Diels-Alder cycloaddition sequence

A series of 2-alkynyl 2-diazo-3-oxobutanoates, when treated with a catalytic quantity of rhodium(II) acetate, afforded furo[3,4-c]furans in good yield. The reaction proceeds by addition of a rhodium-stabilized carbenoid onto the acetylenic pi-bond to give a vinyl carbenoid that subsequently cyclizes onto the neighboring carbonyl group to produce the furan ring. These furo[3,4-c]furans react with various dienophiles, furnishing anisole derivatives derived by loss of water from the initially formed Diels-Alder cycloadducts. The Rh(II)-catalyzed cyclization reaction was quite versatile with regard to the nature of the interacting carbonyl group. The methodology was applied to the synthesis of several oxa-polyheterocyclic systems by first generating a 2-alkoxy-substituted furan and then allowing it to undergo a subsequent intramolecular Diels-Alder cycloaddition. Ring opening of the resulting cycloadduct is followed by deprotonation to furnish a rearranged keto lactone. The potential use of this method for the synthesis of the alkaloid strychnine was probed using suitable model diazo compounds. To establish the viability of this approach, the Rh(II)-catalyzed cyclization/cycloaddition sequence of alpha-diazo amides 64 and 68 were studied. Both compounds underwent the sequential process in good overall yield, leading to novel pentacyclic products. The structural features of the resultant products present numerous opportunities for postcycloaddition manipulations that could be exploited to synthetic advantage.     

Studies on the Diels-Alder reaction of annulated furans: application to the synthesis of substituted phenanthrenes

In an attempt to utilize the synthetic power of the furan nucleus in the synthesis of complex natural products, we have developed an entry into annulated furan intermediates that involves an electrochemical annulation protocol. An approach to the eunicellin diterpenes based on this methodology required the use of an intermolecular Diels-Alder reaction on an annulated furan. Although well known for simple furans, there is a paucity of related examples on annulated furans. To examine the feasibility of such an approach to these diterpenes, we have studied this key cycloaddition reaction. Our studies indicate that the process can be hampered by a facile retro-Diels-Alder that is highly dependent on the dienophile employed.     

A new method for the preparation of 2-thio substituted furans by methylsulfanylation of gamma-dithiane carbonyl compounds

Several related methods for the preparation of differentially substituted 2-thiofurans are described. The general procedure involves the formation of a thionium ion from a gamma-dithianyl substituted carbonyl compound followed by cyclization of this reactive intermediate onto the tethered carbonyl group. Two methods for thionium ion generation were explored. One of these involved an acid-catalyzed reaction of beta-ketenedithioacetals, prepared from the condensation of 2,2-bis(methylsulfanyl)acetaldehyde with a variety of ketones. Cyclization followed by loss of methane thiol gave 2-thiofurans 17, 18 and 23, 24 in 70-90% yield. Attempts to prepare 5-heteroatom substituted 2-thiofurans from the corresponding beta-ketenedithioacetal amides or esters were unsuccessful, leading to 1,2-thio rearranged products. A more successful route involved the reaction of beta-acetoxy-gamma-thianyl carbonyl compounds with dimethyl(methylthio)sulfonium tetrafluoroborate (DMTSF). Treatment of the dithiane with this reagent resulted in the smooth generation of a thionium ion. Cyclization followed by loss of acetic acid afforded thiofurans 17, 18, 23, 47-49, 51, and 61-64 in 40-100% yield. The N-butenyl substituted thioamido furan furnished a rearranged hexahydropyrroloquinolin-2-one in high yield when heated at 110 degrees C.     

The synthesis and transition temperatures of 5-(4-alkyl- and 4-alkoxy-phenyl)-2-cyanobenzo[b]furans and a 5-(4'-alkylbiphenyl-4-yl)-2-cyanobenzo[b]furan: a comparison with their biphenyl and terphenyl analogues

The synthesis and transition temperatures of a series of 5-(4-alkyl- and 4-alkoxy-phenyl)2-cyanobenzo[b]furans and a 5-(4'-alkylbiphenyl-4-yl)-2-cyanobenzo[b]furan are presented. The 2-cyanobenzo[b]furans show similar mesophase types to the analogous biphenyl and terphenyl compounds, which are obtained by replacing the benzo[b]furan unit with a phenyl ring. The transition temperatures for the 2-cyanobenzo[b]furan compounds are always higher than for their biphenyl and terphenyl counterparts, but they are much lower than for the corresponding phenylnaphthalenes. Five mesogenic benzo[b]furans without a cyano group were prepared as intermediates and these compounds have lower clearing points than their biphenyl analogues.     

A stereoselective and atom-efficient approach to multifunctionalized five- and six-membered rings via a novel michael-initiated intramolecular Diels-Alder furan reaction

[reaction: see text] A variety of key precursors to the intramolecular Diels-Alder reaction of furan diene (IMDAF) have been prepared via a very facile 1,4-addition of O-, S-, N-, and C-centered nucleophiles possessing unsaturated tether to beta-furyl nitroethylene. Subsequent IMDAF reaction of the 1,4-adducts, carried out under thermal conditions, provided five- and six-membered carbocycles and heterocycles fused to an easily cleavable oxabicycloheptene moiety. The structure and stereochemistry of the cycloadducts were determined by 2D-NMR experiments and further confirmed by X-ray crystallography. The salient features of the strategy include high degree of stereoselectivity (>80:20) in the cycloaddition, atom and step economy, and generation of multiple chiral centers and functionalities. The feasibility of the cleavage of the oxa bridge in the cycloadducts to afford novel multifunctional molecules has also been demonstrated.     

An efficient synthesis of 2-(guaiazulen-1-yl)furan derivatives via intramolecular Wittig reactions

An efficient and mild synthesis of 2-(guaiazulen-1-yl)furans,starting from easily accessible 1-(3-aryl-2-cyanopropenoyl) guaiazulenes,tributylphosphine and acyl chlorides,is described.The strategy employs the intramolecular Wittig protocol as a key step to append the crticial furan ring,leading to the highly functional furans in good yields.     

An efficient approach to isoindolo[2,1-b][2]benzazepines via intramolecular [4+2] cycloaddition of maleic anhydride to 4-α-furyl-4-N-benzylaminobut-1-enes

Acylation of 4-α-furyl-4-N-benzylaminobut-1-enes with maleic anhydride gave 4-oxo-3-aza-10-oxatricyclo[5.2.1.0^1,5]dec-8-ene-6-carboxylic acid via amide formation followed by intramolecular Diels-Alder reaction of furan (IMDAF). The cycloaddition proceeded under mild reaction conditions (25 °C) and provided only the exo-adduct in quantitative yield. Treatment of this compound with PPA gave isoindolo[2,1-b][2]benzazepine derivatives via ring opening, aromatization and intramolecular electrophilic alkylation. In order to extend the scope of the reaction sequence, 7-oxo-5,11b,12,13-tetrahydro-7H-isoindolo[2,1-b][2]benzazepine-8-carboxylic acids were further transformed into useful synthetic intermediates.     

Studies on silyl furans. II. Halodesilylation of 2-trimethylsilyl-3,4-bis(methoxycarbonyl)furans

Reactions of 2-trimethylsilyl-3,4-bis(methoxycarbonyl)furans 1a,b with sulfuryl chloride, bromine, and iodine monochloride in acetonitrile afforded the corresponding 2-halo-3,4-bis(methoxycarbonyl)furans 2a-f via chloro-, bromo-, and iododesilylation in good yields, respectively. However, the reaction of 1a with bromine in carbon tetrachloride mainly gave 2-bromo- 2b and 2-bromo-5-trimethylsilyl-3,4-bis(methoxycarbonyl)furan ( 3 ) in 37% and 45% yields. Similarly, the reaction of 1a with iodine monochloride afforded 1a , 2-chloro- 2a and 2-iodo-3,4-bis(methoxycarbonyl)furan ( 2c ) in 50%, 27%, and 23% yield.     

The synthesis and transition temperatures of 5-(4-alkyl- and 4-alkoxy-phenyl)-2-cyanobenzo[b]furans and a 5-(4'-alkylbiphenyl-4-yl)-2-cyanobenzo[b]furan: a comparison with their biphenyl and terphenyl analogues

The synthesis and transition temperatures of a series of 5-(4-alkyl- and 4-alkoxy-phenyl)2-cyanobenzo[b]furans and a 5-(4'-alkylbiphenyl-4-yl)-2-cyanobenzo[b]furan are presented. The 2-cyanobenzo[b]furans show similar mesophase types to the analogous biphenyl and terphenyl compounds, which are obtained by replacing the benzo[b]furan unit with a phenyl ring. The transition temperatures for the 2-cyanobenzo[b]furan compounds are always higher than for their biphenyl and terphenyl counterparts, but they are much lower than for the corresponding phenylnaphthalenes. Five mesogenic benzo[b]furans without a cyano group were prepared as intermediates and these compounds have lower clearing points than their biphenyl analogues.     

Reaction between Furan‐ or Thiophene‐2‐carbonyl Chloride,Isocyanides, and Dialkyl Acetylenedicarboxy­lates: Multicomponent Synthesis of 2,2′‐Bifurans and 2‐(Thiophen‐2‐yl)furans

An efficient multi‐component synthesis of highly functionalized 2,2′‐bifurans and 2‐(thiophen‐2‐yl)furans is described. A mixture of furan‐ or thiophene‐2‐carbonyl chloride, an isocyanide, and a dialkyl acetylenedicarboxylate undergoes a smooth addition reaction in dry CH₂Cl₂ at ambient temperature to produce 2‐amino‐5‐(4‐chlorofuran‐2‐yl)furan‐3,4‐dicarboxylates and 2‐amino‐5‐(4‐chlorothiophen‐2‐yl)furan‐3,4‐dicarboxylates. A single‐crystal X‐ray‐analysis of a derivative conclusively confirms the structure of these 2,2′‐bifurans and 2‐(thiophen‐2‐yl)furans. A novel electrophilic aromatic substitution reaction can justify the formation of the Cl‐substituted furan or thiophene rings.     

Synthesis of 1-(2-Ethoxyethyl)-4-hydroxy-4-[2-(1-hydroxycyclohexyl)ethynyl]piperidine and Heterocyclization under the Conditions of Hydration

The reaction of 1-(2-ethoxyethyl)piperidin-4-one with ethynylcyclohexanol led to the synthesis of a glycol, the hydration of which gave a mixture of spirocyclic compounds with a carbonyl group at various positions in the furan ring. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1649–1652, November, 2005.     

A Cycloaddition Approach toward the Synthesis of Substituted Indolines and Tetrahydroquinolines

The intramolecular Diels-Alder reaction of 2-substituted aminofurans (IMDAF) results in the formation of various indolines and tetrahydroquinolines. The isolation of these ring systems from the IMDAF reaction can be rationalized in terms of an initial [4 + 2]-cycloaddition that first produces an oxa-bridged cycloadduct, which was not detected since it readily underwent nitrogen-assisted ring opening. Proton exchange followed by an eventual dehydration provides the aromatic product. In certain cases, the intermediate cyclohexadienol can be isolated and independently converted to the final product in high yield. The starting 2-aminofurans were readily prepared from furanyl acyl azide by a Curtius rearrangement in the presence of an alcohol. Alkylation of the resulting N-alkyl carbamate with an alkenyl bromide allows for the synthesis of a wide variety of cycloaddition precursors. The scope of the IMDAF reaction was evaluated by using mono- and disubstituted alkenes, electron rich and electron deficient olefins, and acetylenic tethers. Cyclic 2-amidofurans were also synthesized using a related intramolecular Diels-Alder reaction of 2-amido-substituted oxazoles which contain a tethered alkyne. This transformation represents a new route to this rare heterocyclic ring system. The sequential cycloaddition method was used for a formal synthesis of the pyrrolophenanthridone alkaloid hippadine.     

3-Chloroalkylfurans in the reaction with sodium diethyl phosphite

Reduction of 3-acylfurans with lithium alumohydride in ether yields stable secondary alcohols. By treatment with thionyl chloride in the presence of pyridine, they are converted to the corresponding chlorides. 3-(1-Chloroethyl)furan and 5-methyl-3-(1-chloroethyl)furan react with sodium diethyl phosphite to give two products: 3-(1-diethoxyphosphorylethyl)furans and 3-ethyl-2-(diethoxyphosphoryloxy)furans. The methyl group in position 5 of the furan ring increases the relative phosphate content of the mixture by a factor of approximately 2.5. Blocking of position 2 or both positions 2 and 5 of the ring with methyl groups leads to phosphoate formation only. The reaction of 2,5-dimethyl-3-(1-chloro-2-methylpropyl)furan also occurs according to the Michaelis-Becker scheme. The products of the side chain dehydrohalogenation with sodium diethyl phosphite were not found.     

Überraschende Reaktion von 5‐(Phenylthio)‐ und 5‐(Methylthio)pent‐ 2‐en‐4‐inal mit HCl

Surprising Reaction of 5‐(Phenylthio)‐ and 5‐(Methylthio)pent‐2‐en‐4‐inal with HCl Contrary to expectations (Scheme 1), 5‐(phenylthio)‐( 1a ) as well as 5‐(methylthio)pent‐2‐en‐4‐inal ( 1b ) react with a slight excess of HCl to give 2‐[bis(phenylthio)methyl]furan ( 17a , 77% yield) and 2‐[bis(methylthio)methyl]furan ( 17b , 61% yield), respectively. Structures 17a and 17b are supported by the results of an X‐ray crystal‐structure analysis, by spectroscopic data in comparison to those of model compounds, and by synthesis of 17a . This surprising reaction is tentatively explained by a mechanism (Scheme 4), including a special pyran→furan ring‐contraction sequence, which is in agreement with a labelling experiment.     

Highly-functionalised difluorinated cyclohexane polyols via the Diels-Alder reaction: regiochemical control via the phenylsulfonyl group

A difluorinated dienophile underwent cycloaddition reactions with a range of furans to afford cycloadducts which could be processed regio- and stereoselectively via episulfonium ions, generated by the reaction between their alkenyl groups and phenylsulfenyl chloride. The oxabicyclic products were oxidised to the phenylsulfonyl level and ring opened via E1(C)B or reductive desulfonative pathways to afford, ultimately, difluorinated cyclohexene or cyclohexane polyols.