Conformational, optical, and electrooptical properties of cellulose pelargonates in solutions

Newly prepared cellulose pelargonate samples of various molecular weights were studied in dioxane and chloroform solutions by isothermal translation diffusion, high-speed sedimentation, flow birefringence (Maxwell effect), electric birefringence (Kerr effect), and viscometry. The conformational, hydrodynamic, optical, electrooptical, and dynamic characteristics of the polymer were determined.     

Self-organization of macromolecules and liquid-crystalline phase transitions in solutions of cellulose esters

For hydroxypropyl cellulose-ethanol, hydroxyethyl cellulose-water, and cyanoethyl cellulose-DMAA systems, phase diagrams are constructed and the regions of existence of isotropic and anisotropic phases and the dimensions of macromolecules and supramacromolecular particles in a wide composition range are determined through the use of the cloud-point method, polarization microscopy, the turbidityspectrum method, dynamic light-scattering measurements, and a polarization optical apparatus. It is shown that the formation of LC phases with an increase in the polymer concentration is associated with a significant enlargement of supramolecular particles.     

Conformational properties of rigid-chain amphiphilic macromolecules: The phase diagram

The coil-globule transition in rigid-chain amphiphilic macromolecules was studied by means of computer simulation, and the phase diagrams for such molecules in the solvent quality-persistence length coordinates were constructed. It was shown that the type of phase diagram depends to a substantial extent on the degree of polymerization of a macromolecule. Relatively short amphiphilic macromolecules in the poor-solvent region always form a spherical globule, with the transition to this globule involving one or two intermediate conformations. These are the disk globule if the Kuhn segment is relatively large and the string of spherical micelles or the disk globule in the case of relative flexible chains. The phase diagram of a long rodlike amphiphilic chain turned out to be even more complex. Namely, three characteristic regions were distinguished in the region of a poor solvent, depending on the chain rigidity: the region of a cylindrical globule without certain order in the main chain, the region of the cylindrical globule with blobs having the collagen ordering of the chain, and the region of coexistence of collagen-like and toroidal globules. In the intermediate transitional region, not only conformations of strings of spherical micelle beads but also the necklace conformations in which the polymer chain in each bead has collagen ordering can occur in this case.     

Synthesis and optical properties of metal-centered dimeric fullerene macromolecules

Dimeric fullerene macromolecules were prepared via the complexation of two fullerenylated 2,2′:6′,2″-terpyridine ligands with Fe(II) and Co(II) ions. The solubility of these macromolecules in some organic solvents allowed both their structural characterization and a study of their optical properties. The electronic absorption and emission of the macromolecules in solution were evaluated; and the results indicated no meaningful ground-state and excited singlet state intramolecular charge transfer interactions. However, the laser flash photolysis results could be explained in terms of the electron transfer quenching of the excited triplet methanofullerene moiety by the center metal–ligand complex in the macromolecules. The optical limiting properties of the macromolecules in solution were also investigated in comparison with those of the ligands for an evaluation of the complexation effects.     

Synthesis and properties of some butylphenylarsinothious esters

Conclusions Butylphenylarsinothious esters were prepared for the first time by the reactions of butylphenylarsinous halides with thiols, and some of their properties were studied.This article is published in accordance with a resolution of the Conference of Editors-in-Chlef of Journals of the Academy of Sciences of the USSR of July 12, 1962, as a dissertation paper by M. P. Osipova.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1326–1331, June, 1969.     

Conformational study of methyl esters of some aliphatic erythro- and threo-dichlorocarboxylic acids

The average conformations of methyl esters of some aliphatic erythro- and threo-dichlorocarboxylic acids in dilute carbon tetrachloride solutions have been determined from the vicinal proton–proton coupling constants and ¹H NMR shifts. The ¹³C shift differences between the erythro and threo forms are compared and discussed with regard to the differences in the average conformations.     

Synthesis and properties of amino acid esters of hydroxypropyl cellulose

The amino acid esters of hydroxypropyl cellulose (HPC) [R′ = H ( 2a ), CH₃ ( 2b ), CH₂CH(CH₃)₂ ( 2c ), CH₂CONH₂ ( 2d ), CH₂CH₂CONH₂ ( 2e ), CH₂CH₂CH₂CH₂ NHOCOC(CH₃)₃ ( 2f )] were synthesized in good yield by the reaction of t‐butoxycarbonyl (t‐Boc)‐protected amino acids with hydroxy groups of HPC ( 1 ; molar substitution (MS), 4.61). The amino acid functionalities displaying varied chemical nature, shape, and bulk were utilized and the bulk of the substituent on the α‐carbon of amino acids was elucidated to be of vital significance for the observed degree of incorporation (DS_Est). The ¹H NMR spectra and elemental analysis were employed to determine the degree of incorporation of amino acid moiety (DS_Est) and almost complete substitution of the hydroxy protons was revealed for 2a , 2b , and 2f . The presence of the peaks characteristic of the carbonyl group in the FTIR spectra furnished further evidence for the successful esterification of HPC. The starting as well as the resulting polymers ( 1 and 2a – f ) were soluble in polar organic solvents; however, the esterification of 1 with bulky organic moieties resulted in an increased hydrophobicity as all of the amino acid‐functionalized polymers ( 2a – f ) were insoluble in water. The onset temperatures of weight loss of 2a – f were 175–230 °C, indicating fair thermal stability. The amino acid functionalization led to the enhanced polymer chain stiffness, and the glass transition temperatures of the derivatized polymers were 30–40 °C higher than that of 1 (T_g 3.9 °C; cf. T_g of 2a – f , 35.1–43.3 °C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2326–2334, 2008     

Thermodynamic properties of solutions of water-soluble mixed cellulose esters

The thermodynamics of the mixing of water-soluble mixed cellulose esters with water has been studied. A dependence of the affinity of a water-soluble cellulose acetate for water on the nature of a new radical introduced into the macromolecule and the competing interaction of molecules of the same and different types has been shown. Thermodynamic analysis has demonstrated the dominating role of solvation among the various factors determining the interaction of cellulose acetomaleate and acetophthalate with a solvent. A fall in affinity in the cellulose aminoacetate-water system is due to the contribution of entropy effects, leading to an increase in the Flory-Huggins parameter.Tashkent Institute of Chemical Technology. Translated from Khimiya Prirodnykh Soedinenii, Vol. 33, No. 1, pp. 97–101, January–February, 1997.     

Lipophilicity determination of some 3,5-dinitro-benzoic-acid esters on unimepregnated cellulose layer

Unimpregnated cellulose layers proved to be suitable for the determination of the lipophilic character of 14 3,5-dinitro benzoic acid esters under reversed-phase, thin-layer chromatographic conditions. Lipophilic characters measured on unimpregnated cellulose layers correlated well with similar values determined on impregnated silica and on impregnated alumina. Minor differences in retention of the three types of layers were observed.     

Effect of degradation on thermotropic cholesteric optical properties of (2-hydroxypropyl) cellulose (HPC) esters

Some esters of (2-hydroxypropyl) cellulose have been prepared and studied. Their cholesteric properties change with ageing and may disappear. Accelerated aging has been performed in order to analyze degradation processes which are relevant to the scission of the polymeric main chain and to the hydrolysis of the ester bonds which are mainly due to traces of water. The necessity of carefully elaborate purification is highlighted.     

Conformational properties of macromolecules of heterocyclic polyester imides in dilute dichloroacetic acid solutions

Several series of polyester imides (PEIs) were prepared by melt polycondensation of trimellitimidobenzoic acid and acetylated, substituted hydroquinones as well as by solution polycondensation of corresponding dichlorides with hydroquinones. The influence of either phenyl- or tert-butyl substituents at the hydroquinone unit on the hydrodynamic (diffusion and viscometry) and optical [flow (FB) and electrical (EB) birefringence] properties of solutions of these PEIs were investigated. Independent methods for quantitative evaluation of the length of the statistical Kuhn segment A gave values of 14.5 nm (translational friction and electrical birefringence) and 12.0 nm (flow birefringence), respectively. The equilibrium rigidity of PEIs with phenyl and tert-butyl lateral substituents at the para-aromatic chain fragment was comparable. Conformational properties of the PEIs were analyzed, and the conjugation energies of the ester and amide groups for para-aromatic polyesters, PEIs, and structurally similar polyamidobenzoxazoles and polyamidobenzimidazoles were compared. The introduction of the phthalimide ring leads to a decrease of conjugation energy and deviation of the ester group from coplanarity. The Kuhn segment values obtained were useful for calculations of phase diagrams of semiflexible segmented block copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 12–24, 2004     

Conformational modulation of sequence recognition in synthetic macromolecules

The different triplet sequences in high molecular weight aromatic copolyimides comprising pyromellitimide units ("I") flanked by either ether-ketone ("K") or ether-sulfone residues ("S") show different binding strengths for pyrene-based tweezer-molecules. Such molecules bind primarily to the diimide unit through complementary π-π-stacking and hydrogen bonding. However, as shown by the magnitudes of (1)H NMR complexation shifts and tweezer-polymer binding constants, the triplet "SIS" binds tweezer-molecules more strongly than "KIS" which in turn binds such molecules more strongly than "KIK". Computational models for tweezer-polymer binding, together with single-crystal X-ray analyses of tweezer-complexes with macrocyclic ether-imides, reveal that the variations in binding strength between the different triplet sequences arise from the different conformational preferences of aromatic rings at diarylketone and diarylsulfone linkages. These preferences determine whether or not chain-folding and secondary π-π-stacking occurs between the arms of the tweezer-molecule and the 4,4'-biphenylene units which flank the central diimide residue.     

Electrical and optical properties of some azo dyes

The dipole moments of six monoazo dyes were obtained from measurements of their static dielectric constants and refractive indices of dilute solutions in benzene and carbon tetrachloride at temperatures between 20°C and 40°C. Also their lightfastness and absorption spectra (λ_max) were measured.From the results obtained, it was found that there is a linear relationship between the dipole moment, lightfastness and maximum absorption (λ_max) of the monoazo dyes under investigation.     

Thermoluminescence and optical properties of some dosimetric materials

Thermoluminescence and optical properties of LiF:Mg,Cu,P; BaSO₄:Dy; BaSO₄; Eu and -Al₂O₃:C were investigated as a part of a broader research project on TL mechanisms in various materials. The effects of ionizing radiation on these phosphors are determined in this work by means of thermoluminescence and optical absorption experiments with the aim of identifying new defects formed in these systems and of testing dosimetric characteristics.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthday     

Novel bulky esters of cellulose

Novel bulky esters of cellulose were synthesized homogeneously, applying the solvent systems DMA/LiCl or DMSO/TBAF, by conversion of the biopolymer with aryl polyester dendrons. The carboxylic acid moieties were efficiently activated in situ with CDI or the acid chloride was applied. Cellulose esters with DS values of up to 0.7 were obtained. The functionalization pattern was analyzed by different NMR spectroscopic techniques indicating that not only position 6 (primary hydroxyl group) but also the secondary one at position 2 was included in the reaction.     

Synthesis,characterization and properties of novel cellulose derivatives containing phosphorus: cellulose diphenyl phosphate and its mixed esters

Using ionic liquid 1-allyl-3-methylimidazolium chloride as reaction medium, a series of novel cellulose esters containing phosphorus including cellulose diphenyl phosphate (C-Dp) and cellulose acetate (CA)–diphenyl phosphate mixed esters was synthesized homogeneously. The degree of substitution was well controlled by altering reaction conditions, such as the molar ratio of the acylating reagents/anhydroglucose unit and reaction time. The structure and thermal properties of cellulose esters were characterized by FTIR, NMR, wide-angle X-ray powder diffraction and differential scanning calorimetry. All the products possessed excellent solubility in some common organic solvents, and transparent films of cellulose esters were obtained by solution casting. In contrast to C-Dp, CA–diphenyl phosphate mixed esters showed clear glass transitions. More interestingly, these cellulose mixed esters exhibited thermoplastic behavior and could be processed by traditional melt processing methods.     

Conformational populations and rotational barriers in esters

The $\text{trans}$ conformations of methyl, ethyl and isopropyl formate were shown to be present in equilibrium in a polar solvent with the $\text{cis}$ conformations to significant (> 1% 230 K) but much lower extents than for t-butyl formate; rotational barriers for the former compounds are greaters.