Stability of manganese dioxide by guar gum in the absence or presence of surfactants

Stability of the manganese dioxide (MnO₂) suspensions by non-ionic guar gum (GG) in the absence or presence of the surfactants: anionic sodium dodecyl sulphate (SDS), cationic hexadecyltrimethylammonium bromide (CTAB) and non-ionic Triton X-100 (t-octylphenoxypolyethoxyethanol) and their equimolar mixtures (SDS/TX-100; CTAB/TX-100) was measured using turbidity. The obtained results of the manganese dioxide suspensions stability were discussed together with the adsorption data and with the data concerning the thicknesses of the adsorption layers. In order to gain more information about the structure of the electric double layer surface charge density and the zeta potential measurements were performed. The obtained results show that the addition of guar gum to the MnO₂ suspensions increases MnO₂ stability. The larger this increase is, the higher is the concentration of the polymer (concentration range 10–200 ppm). Moreover, the addition of single surfactants also causes the increase in the effectiveness of stabilizing the manganese dioxide suspensions. The reason for that is formation of multilayer complexes between the polymer and the surfactants. In such a system both the adsorption of polymer and the thickness of polymer adsorption layer increase. The greatest increase in the stability of MnO₂/GG suspensions was provided by the mixture of anionic and non-ionic surfactants due to a strong synergistic effect. Also, mixing the polymer and two surfactants reduces the stability of the suspension.     

Kinetics of metribuzin degradation by colloidal manganese dioxide in absence and presence of surfactants

The kinetics of the degradation of metribuzin by water-soluble colloidal MnO₂ in acidic medium (HClO₄) were studied spectrophotometrically in the absence and presence of surfactants. The experiments were performed under pseudo-first-order reaction conditions in respect of MnO₂. The degradation was observed to be of the first order in respect of MnO₂ while of fractional order for both metribuzin and HClO₄. The rate constant for the degradation of metribuzin was observed to decrease as the concentration of MnO₂ increased. The anionic surfactant, sodium dodecyl sulphate (SDS), was observed to be ineffective whereas the non-ionic surfactant, Triton X-100 (TX-100), accelerated the reaction rate. However, the cationic surfactant, cetyltrimethyl ammonium bromide (CTAB), caused flocculation with oppositely-charged colloidal MnO₂; hence further study was not possible. The catalytic effect of TX-100 was discussed in the light of the available mathematical model. The kinetic data were exploited to generate the various activation parameters for the oxidative degradation of metribuzin by colloidal MnO₂ in the absence as well as the presence of the non-ionic surfactant, TX-100.     

Interaction of Nonionic Surfactant Triton-X-100 with Ionic Surfactants

The interaction in two mixtures of a nonionic surfactant Triton-X-100 (TX-100) and different ionic surfactants was investigated. The two mixtures were TX-100/sodium dodecyl sulfate (SDS) and TX-100/cetyltrimethylammonium bromide (CTAB) at molar fraction of TX-100, α_TX-100 = 0.6. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), maximum surface excess concentration (Γ_max), and minimum area per molecule at the air/solution interface (A _min) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were also determined. Mixtures of both TX-100/SDS and TX-100/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.     

Adsorption and elektrokinetic properties of the system: carboxymethylcellulose/manganese oxide/surfactant

The adsorption of carboxymethylcellulose (CMC) in the presence of the surfactants: anionic SDS, nonionic polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (Triton X-100) and their mixtures SDS/polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether with different molar ratios (1:1; 1:3 and 3:1) from the electrolyte solutions (NaCl, CaCl₂) on the manganese dioxide surface (MnO₂) was studied. In every measured system the increase of CMC adsorption in the presence of surfactants was observed. This increase was the smallest in the presence of SDS, a bit larger in the presence of polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether and the largest when the mixtures of SDS/polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether were used. Among the measured mixtures, the mixture of SDS/polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether with the molar ratio 1:3 caused the largest increase of CMC adsorption amount. These results are a consequence of formation of complexes between the carboxymethylcellulose macromolecules and the surfactant molecules. In order to determine the electrokinetic properties of the system the surface charge density of MnO₂ and the zeta potential measurements were conducted in the presence of the CMC macromolecules and the surfactants. The obtained data showed that the adsorption of CMC or CMC/surfactants complexes on the manganese dioxide surface strongly influences the structure of the electric double layer MnO₂/electrolyte solution.     

Mutual influence of cetyltrimethylammonium bromide and Triton X-100 on their adsorption at the water–air interface

On the basis of surface tension values of the aqueous solution of cetyltrimethylammonium bromide (CTAB) and Triton X-100 (TX-100) mixtures measured at 293 K as a function of CTAB or TX-100 concentration at constant TX-100 or CTAB concentration, respectively, the real surface area occupied by these surfactants at the water–air interface was established which is inaccessible in the literature. It appeared that at the concentration of the CTAB and TX-100 mixture in the bulk phase corresponding to the unsaturated monolayer at the water air-interface this area is the same as in the monolayer formed by the single surfactant at the same concentration as in the mixture. In the saturated mixed monolayer at this interface the area occupied by both surfactants is lower than that in the single surfactant monolayer corresponding to the same concentration in the aqueous solution. However, the decrease of the CTAB adsorption is lower than that of TX-100 and the total area occupied by the mixture of surfactants is also lower than that of the single one. The area of particular surfactants in the mixed saturated monolayer changes as a function of TX-100 and CTAB mixture concentration and at the concentrations close to CMC or higher the area occupied by both surfactants is the same. The changes of the composition of the mixed surface monolayer are connected with the synergetic effect in the reduction of the water surface tension by the adsorption of CTAB and TX-100 at the water–air interface. This effect was confirmed by the values of the standard Gibbs free energy of adsorption of both individual surfactants and their mixtures with different compositions in the bulk phase determined by using the Langmuir equation if RT instead of nRT was applied in this equation.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Water-soluble colloidal manganese dioxide as an oxidant for l-tyrosine in the absence and presence of non-ionic surfactant TX-100

Water-soluble colloidal manganese dioxide has been used to oxidize l-tyrosine in aqueous-acidic medium. The kinetics of the reaction was studied in the absence and presence of non-ionic surfactant (TX-100) using a spectrophotometric technique. As the reaction was fast under pseudo-first-order conditions ([l-tyrosine]  [MnO₂]), the rate constants as a function of [l-tyrosine], [MnO₂], [HClO₄] and temperature were obtained under second-order conditions. The rate of the reaction increased and decreased with the increase in [l-tyrosine] and [MnO₂], respectively. Perchloric acid, sodium pyrophosphate and sodium fluoride showed catalytic effect. The effect of externally added manganese(II) sulphate is complex. It is not possible to predict the exact dependence of the rate constants on manganese(II) concentration, which has a series of reactions with other reactants. The reaction is inhibited by the non-ionic surfactant TX-100. Activation parameters have been evaluated using Arrhenius and Eyring equations. Based on observed kinetic results, a probable mechanism for the reaction has been proposed which corresponds to fast adsorption of the reductant and hydrogen ion on the surface of colloidal MnO₂ followed by one-step two-electron transfer rate limiting process.     

Kinetics of colloidal MnO<Subscript>2</Subscript> reduction by L-arginine in absence and presence of surfactants

The kinetics of the oxidation of L-arginine by water-soluble form of colloidal manganese dioxide has been studied using visible spectrophotometry in aqueous as well as micellar media. To obtain the rate constants as functions of [L-arginine], [MnO₂] and [HClO₄], pseudo-first-order conditions are maintained in each kinetic run. The first-order-rate is observed with respect to [MnO₂], whereas fractional-order-rates are determined in both [L-arginine] and [HClO₄]. Addition of sodium pyrophosphate and sodium fluoride enhanced the rate of the reaction. The effect of externally added manganese(II) sulphate is complex. It is not possible to predict the exact dependence of the rate constant on manganese(II) concentration, which has a series of reactions with other reactants. The anionic surfactant SDS neither catalyzed nor inhibited the oxidation reaction, while in presence of cationic surfactant CTAB the reaction is not possible due to flocculation of reaction mixture. The reaction is catalyzed by the nonionic surfactant TX-100 which is explained in terms of the mathematical model proposed by Tuncay et al. Activation parameters have been evaluated using Arrhenius and Eyring equations. On the basis of observed kinetic results, a probable mechanism for the reaction has been proposed which corresponds to fast adsorption of the reductant and hydrogen ion on the surface of colloidal MnO₂.     

SURFACTANT MEDIATED POLYMERIZATION KINETICS OF ACRYLAMIDE USING CR(VI)-CYCLOHEXANONE REDOX SYSTEM

The effect of organized surfactants on the kinetics of acrylamide (AM) polymerization have been studied over a temperature range of 25–45°C using Cr (VI)-cyclohexanone (CH) redox system as initiator. The rate of polymerization, R_p(obs), as well as, the percentage of the monomer conversio were found to be increased with increasing the concentration of the anionic surfactant (SDS), above its CMC. But the cationic surfactant (CTAB) reduced the rate considerably at higher concentration, while non-ionic surfactant (TX-100) played no role on the rate. The effect of [Cr(VI)], [CH], [AM], [H+], and ionic strength on the rates have also been examined. The presence of 0.015M SDS decreased the overall activation energy of the polymerization by 6.28 k.Cal/ mole as compared to that in the absence of a surfactant. On increasing the SDS concentration, the viscosity average molecular weight was also found to increase. For the polymerization process, a mutable mechanistic scheme has been pro-posed.     

Effect of microheterogeneous environments of CTAB,Triton X-100, and Tween 20 on the oxidative degradation of d-fructose by nanoparticles of MnO2

The kinetics of the oxidative degradation of d -fructose by nanoparticles of MnO₂ has been studied in dilute sulfuric acid medium and also in the presence of surfactants of cetyl trimethyl ammonium bromide (CTAB), Triton X-100 (TX-100), and Tween 20. Amorphous nanoparticles of MnO₂ in the form of spherical particulates of size 50–200 nm, as detected by a transmission electron microscope, have been found to exist, supported on two-dimensional gum acacia sheets. The reaction is first order in MnO₂ but complex order with respect to fructose and H⁺. The reaction is inhibited due to adsorption of reaction products on the surface of MnO₂ nanoparticles. The reaction takes place through an intermediate complex formation between β-d -fructopyranose and protonated MnO₂. A one-step two-electron transfer reaction ultimately leads to the formation of an aldonic acid and formic acid. The entropy of activation plays the key role for the reaction in the absence of surfactants. In the surfactant-mediated reaction, partitioning of both the reactants takes place between the aqueous and micellar pseudophases and reaction occurs following Berezin's model. Binding of fructose with the surfactants in the Stern/palisade layer takes place through the ion–dipole interaction and H-bonding while protonated MnO₂ remains at the outer side of the Stern/palisade layer within the micelle. Both the enthalpy and entropy changes associated with the fructose–water interaction, fructose–micelle interaction, and micelle–water interaction finally control the fructose–micelle binding.     

Role of surfactants in clouding phenomenon of imipramine hydrochloride

The clouding behavior of tricyclic antidepressant drug imipramine hydrochloride (IMP) in aqueous solution has been studied in presence of surfactants. A pH increase in the presence as well as in the absence of surfactants decreased the CP. Drug molecules become neutral at high pH and therefore head–head repulsion decreases which lead to CP decrease. Addition of non-ionic and cationic surfactants increased the CP whereas anionic surfactants showed a peaked profile. Effect of CTAB/TX-100 at different fixed drug concentrations showed that at all surfactant concentrations the CP value was higher for higher drug concentrations. However, variation of pH produced opposite effect: CP at all CTAB/TX-100 concentrations decreased with increasing pH. All results are interpreted in terms of increase in hydrophobicity or hydrophilicity of micelles on addition of surfactants.     

Fluorescence quenching of naphthols by Cu2+ in micelles

Effect of the micelles of anionic, cationic and non-ionic surfactants on the fluorescence quenching of 1- and 2-naphthols has been studied in the presence of copper ion. The excited state lifetime, dynamic and static quenching constants for these systems have been determined. Fluorescence quenching in water and SDS micelle is due to the collision of the fluorophore with the quencher with a small static component. The negatively charged naphtholate ions in the excited state are quenched with significantly higher rates than the neutral naphthol molecules, which are located further inside the mesophase. CTAB micelle is less effective than the SDS micelle for fluorescence quenching. The effect of CTAB on water-assisted excited-state deprotonation has been investigated in the presence of ZnSO₄. For TX-100 micelle there is negligible quenching even at higher concentration of the quencher.     

Competitive adsorption in the system: carboxymethylcellulose/surfactant/electrolyte/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

The adsorption of carboxymethylcellulose (CMC) in the presence or absence of the surfactants: anionic SDS, nonionic Triton X-100 and their mixture SDS/TX-100 from the electrolyte solutions (NaCl, CaCl₂) on the alumina surface (Al₂O₃) was studied. In each measured system the increase of CMC adsorption in the presence of surfactants was observed. This increase was the smallest in the presence of SDS, a bit larger in the presence of Triton X-100 and the largest when the mixture of SDS/Triton X-100 was used. These results are a consequence of formation of complexes between the CMC and the surfactant particles. Moreover, the dependence between the amount of surfactants’ adsorption and the CMC initial concentration was measured. It comes out that the surfactants’ adsorption amount is not dependent on the CMC initial concentration and moreover, it is unchanged in the whole measured concentration range. The influence of kind of electrolyte, its ionic strength as well as pH of a solution on the amount of the CMC adsorption at alumina surface was also measured. The amount of CMC adsorption is larger in the presence of NaCl than in the presence of CaCl₂ as the background electrolyte. It is a result of the complexation reaction between Ca²⁺ ions and the functional groups of CMC belonging to the same macromolecule. As far as the electrolyte ionic strength is concerned the increase of CMC adsorption amount accompanying the increase of electrolyte ionic strength is observed. The reason for that is the ability of electrolyte cations to screen every electrostatic repulsion in the adsorption system. Another observation is that the increase of pH caused the decrease of CMC adsorption. The explanation of this phenomenon is connected with the influence of pH on both dissociation degree of polyelectrolyte and kind and concentration of surface active groups of the adsorbent.     

Kinetics of the Degradation of l-Cysteine at Freshly Prepared Nano-sized MnO2 Surfaces in the Absence and Presence of TX-100

Nano-sized colloidal manganese dioxide was synthesized at room temperature by a chemical method in neutral medium without a stabilizing agent. The obtained MnO₂ nano-sized colloid was found to be stable for several months and was characterized by means of UV–Vis spectroscopy, energy-dispersive X-ray spectrometer (EDX) and transmission electron microscopy. The EDX analysis confirmed the presence of Mn and O in the sample. The paper reports on the use of nano-sized colloidal manganese dioxide as an oxidant in the oxidation of cysteine (Cyst) in the absence and presence of surfactant (TX-100) at 35 °C. The study was carried out as functions of [MnO₂], [Cyst], [HClO₄] and temperature. The results show that the reaction proceeds through fast adsorption of Cyst onto the surface of the colloidal MnO₂. Pseudo-first-order rate constants were found to increase with the increase in [TX-100]. This paper reports values of the reaction rates and activation parameters in the absence and presence of surfactant and proposes a plausible mechanism.     

Micellar Catalysis on Pentavalent Vanadium Ion Oxidation of D-Sorbitol in Aqueous Acid Media: A Kinetic Study

Vanadium(V) oxidation of D-sorbitol shows a first-order dependency on the concentrations of D-sorbitol, vanadium(V), H⁺ and HSO₄⁻. These observations remain unaltered in the presence of externally added surfactants. The effects of the cationic surfactant (i.e., CPC), anionic surfactant (i.e., SDS) and neutral surfactant (i.e., TX-100) have been studied. CPC inhibits the reactions whereas SDS and TX-100 accelerate the reaction to different extents. SDS and TX-100 can be used as catalysts in the production of D-glucose from D-sorbitol.     

Understanding surfactant aided aqueous dispersion of multi-walled carbon nanotubes

Dispersions of multi-walled carbon nanotubes (MWNTs) assisted by surfactant adsorption were prepared for a number of ionic and non-ionic surfactants including sodium 4-dodecylbenzenesulfonate (NaDDBS), hexadecyl(trimethyl)azanium bromide (CTAB), sodium dodecane-1-sulfonate (SDS), Pluronic? F68, Pluronic? F127, and Triton? X-100 to examine the effects of nanotube diameter, surfactant concentration, and pH on nanotube dispersability. Nanotube diameter was found to be an important role in surfactant adsorption rendering single-walled carbon nanotube studies as unreliable in predicting MWNT dispersive behavior. Similar to other reports, increasing surfactant concentrations resulted in a solubility plateau. Quantification of nanotube solubility at these plateaus demonstrated that CTAB is the best surfactant for MWNTs at neutral pH conditions. Deviations from neutral pH demonstrated negligible influence on non-ionic surfactant adsorption. In contrast, both cationic and anionic surfactants were found to be poor dispersing aids for highly acidic solutions while, CTAB remained a good surfactant under strongly basic conditions. These pH dependent results were explained in the context of nanotube surface ionization and Debye length variation.     

Behaviour of phenol red pH-sensors in the presence of different surfactants using the sol-gel process

Phenol red was immobilised into a polysiloxane matrix using a sol-gel process to form pH optical sensors. The sol-gel was obtained by hydrolysis of tetraethoxysilane (TEOS) in the presence of phenol red (PR) and the appropriate surfactant. Different surfactants, namely cetyltrimethylammonium bromide (CTAB), dodecyldimetyl amino-oxide (GLA) and Triton X-100 (TX-100), were employed. Interestingly, the use of surfactants significantly improved the mesostructure of the silica and increased the porosity of the system. The two response pH ranges were shifted to pH 0.0–3.0 and pH 10.5–1.5M [OH^?] compared with those of the free PR (pH 0.0–3.0 and pH 6.5–9.5). It is found that the pH response and the pKa shift of the phenol red were dependent, not only on the silica matrix but also on the ionic properties of surfactants. In the case of ionic surfactants such as CTAB or GLA, there was further shift to more acidic and more basic pH, whereas in the case of non-ionic surfactants such as TX-100 no significant change of the pH curve was observed.     

Mechanism of the oxidation of d-glucose onto colloidal MnO2 surface in the absence and presence of TX-100 micelles

Aqueous colloidal manganese dioxide (MnO₂) was prepared via titration by using potassium permanganate and sodium thiosulphate in aqueous neutral medium. The kinetics of oxidation of d-glucose onto the surface of colloidal MnO₂ have been studied spectrophotometrically. The results show that the rate of initial stage (nonautocatalytic path) increases with increasing the [d-glucose], [H⁺], and temperature and also upon addition of nonionic surfactant Triton X-100 (TX-100), which indicates that the surfactant enhances the concentration of d-glucose at the surface of the colloidal MnO₂. Hydrogen bonding interaction seemingly arises between –OH groups of d-glucose and oxygen of the ether linkages of polyoxyethylene chain of TX-100. A possible mechanism of the oxidative degradation of d-glucose is discussed in terms of d-glucose/TX-100 and colloidal MnO₂ interaction.     

Interaction of poly(vinylpyrrolidone) with cationic and nonionic surfactants in aqueous solution studied by <Superscript>1</Superscript>H NMR

Aqueous solutions of surfactant at various concentrations with 0.2% poly(vinylpyrrolidone) (PVP) were studied by ¹H NMR methods, including relaxation time and self-diffusion coefficient measurements and two-dimensional nuclear Overhauser enhancement spectroscopy. Two surfactants were concerned: cationic cetyltrimethylammonium bromide (CTAB) and nonionic Triton X-100 (TX-100). In the presence of 0.2% PVP, the variation of the T ₂ values of CTAB protons is similar to that in the absence of PVP. Relaxation times of PVP protons are not significantly affected by the increasing concentration of CTAB. This indicates that no interaction between PVP and CTAB could be detected. However, in the presence of 0.2% PVP, TX-100 micelles are formed at a concentration lower than its normal critical micellization concentration. According to the results of relaxation time measurement of water protons, the presence of 0.2% PVP also induces the contraction of the hydrophilic layer of the TX-100 micelle. This indicates some interaction between PVP and TX-100, but the mechanism of this interaction needs further investigation.     

UV-Visible Spectrometric Study and Micellar Enhanced Ultrafiltration of Alizarin Red S Dye

Ultraviolet spectrometric study of alizarin red S (ARS) showed the substantial change in dye spectra by cationic CTAB as compared to anionic SDS and nonionic TX-100 surfactant. High spectral change by CTAB confirms the anionic nature of ARS dye and thus ARS-CTAB complex formation takes place due to electrostatic force of attraction. A little spectral change by SDS is the result of similarly charged repulsive forces that overcome weak hydrophobic-hydrophobic interaction between dye and surfactant micelles. TX-100 exhibited moderate spectral effect responsive to weak hydrophobic-hydrophobic interaction alone. MEUF study of ARS dye justified the spectral changes and dye rejection percentage (R) decreases in the following order: cationic > nonionic > anionic surfactant. Permeate flux (J) slightly decreases in presence of CTAB and it remains virtually constant for both SDS and TX-100. Addition of copper salt (i.e., CuCl₂) in dye-CTAB complex solution, favors rejection (%) removing dye and copper simultaneously via micellar enhanced ultrafiltration.