含可饱和吸收体的单模驻波激光系统的定态行为

具体给出了含可饱和吸收体的单模驻波激光系统的哈密顿(Hamiltonian)量和序参量运动方程,并对序参量的定态解做了线性稳定性分析。结果表明,驻波系统在阈值附近的定态行为(非平衡相变行为、双稳行为、临界点附近的指数行为等)与行波系统定性类似,但具体细节有异。特别不同于行波的是,驻波情形下三个定态解中的I_分支有可能实现。     

碳纳米管锁模双包层光纤激光器的实验研究

本文采用双包层掺镱光纤作为增益介质,用单壁碳纳米管作为饱和吸收体,获得最高输出功率为336 mW的锁模脉冲激光.用飞秒激光诱导水击穿法直接在单模光纤上制备出D形区,通过在D形光纤上滴涂单壁碳纳米管溶液,成功制备出碳纳米管饱和吸收体,并对其饱和吸收特性进行测试,发现其调制深度为27％.利用该饱和吸收体作为锁模器件,制备出具有环形腔结构的锁模光纤激光器.当抽运功率为4W时,获得了脉宽为93.8 fs,中心波长为1083.8 nm,3 dB谱宽为8.6 nm,重复频率为5.59 MHz,平均功率为336 mW的飞秒脉冲激光输出.     

Dynamic process of self-started self-mode-locked Ti:sapphire laser with a semiconductor saturable absorber mirror

Dynamic process of self-started self-mode-locked Ti : sapphire laser with a semiconductor saturable absorber mirror (SESAM) was investigated and two mode-locking starting processes were found in which one is fast and the other is slow. In the fast starting process, a mode-locking build-up time of about 400 μs was needed during which pure passive mode-locking process was caused by the SESAM and Kerr-lens mode-locking process arose from the nonlinearity of the Ti : sapphire gain medium. In the slow starting process, a build-up time of about several minutes was found in which temperature effect of the SESAM dominates the dynamic process.     

Properties of a vector soliton laser passively mode-locked by a fiber-based semiconductor saturable absorber operating in transmission

We experimentally demonstrate a passively mode-locked fiber laser employing a fiber-based semiconductor saturable absorber (SSA) operating in transmission. Polarization rotation locked vector solitons are observed in the laser. Due to the intrinsic dynamic feature of the laser, period-doubling of these vector solitons has also been observed. Furthermore, extra spectral sidebands are formed on the optical spectrum, caused by the energy exchange between the two orthogonal polarization components of the vector solitons. By careful reduction of the pump power together with fine adjustment to the cavity birefringence, period-one state can further be obtained. Additionally, the phase noise properties of the vector soliton fiber laser have also been characterized experimentally and analytically.     

Passive mode locking of a Nd：YAG laser with co－doped Nd, Cr：YAG as saturable absorber

We demonstrate the characteristics of relatively low saturation intensity using co-doped Nd, Cr:YAG as saturable absorber for passively mode locking the Nd:YAG laser. The difference of the saturation intensity between Q-switched and mode-locked operation in co-doped Nd, Cr:YAG was only one to two orders of magnitude, while Cr:YAG was generally reported at a difference of five orders of magnitude. More than 80% mode locking modulation depth was achieved at an incident pump power of 4.4W, corresponding to an intracavity intensity of 6×10^4W/cm^2, using a 68cm long plano-concave cavity.     

Passively mode-locked erbium-doped fiber laser via a D-shape-fiber-based MoS_2 saturable absorber with a very low nonsaturable loss

We report on the generation of conventional and dissipative solitons in erbium-doped fiber lasers by the evanescent field interaction between the propagating light and a multilayer molybdenum disulfide(MoS_2) thin film. The MoS_2 film is fabricated by depositing the MoS_2 water–ethanol mixture on a D-shape-fiber(DF) repetitively. The measured nonsaturable loss, saturable optical intensity, and the modulation depth of this device are 13.3%, 110 MW/cm~2, and 3.4% respectively.Owing to the very low nonsaturable loss, the laser threshold of conventional soliton is as low as 4.8 mW. The further increase of net cavity dispersion to normal regime, stable dissipation soliton pulse trains with a spectral bandwidth of 11.7 nm and pulse duration of 116 ps are successfully generated. Our experiment demonstrates that the MoS_2-DF device can indeed be used as a high performance saturable absorber for further applications in ultrafast photonics.     

Single output LD end-pumped passively mode-locked Nd:YVO4 laser with semiconductor saturable absorber mirror

A quarter-wave plate and the thin film polarizer(TFP) are used for the LD end-pumped passively mode-locked Nd:YVO4 laser with semiconductor saturable absorber mirror(SESAM) to obtain a single beam output with a total power of 4.8 W.An optical-optical efficiency is achieved to be 24% for a stable CW mode-locking operation at 1064 nm,with a pulse repetition rate of 70 MHz and pulse width of 16 ps.The multipulse in the pulse sequence is eliminated for reaching a peak power as high as 4 kW.     

Theory of passively mode-locked lasers with self-frequency shift and saturable absorber response

A general theoretical model for passively mode-locked lasers is presented, in which both the self-frequency shift and either a fast or a slow saturable absorber response are taken into account. An exact soliton-like solution and condition for its existence are obtained under a definite compatible condition. The stability of the solution is analyzed by using a variational method, and a parameter region, in which the solution is linearly stable, is acquired theoretically. To verify the theoretical predictions, a typical example is given for stable pulse propagation over a long distance. The numerical results show that the soliton-like solution is stable under some perturbations within the linearly stable region and an arbitrary Gaussian pulse converges to the exact soliton-like solution after evolution in a distance.     

Optimization of passively Q-switched laser with V:YAG saturable absorber

By considering the Gaussian spatial distributions of the intracavity photon density and the initial population-inversion density, the coupled rate equations for a diode-pumped passively Q-switched laser with V³⁺:YAG saturable absorber are given. These coupled rate equations are solved numerically and the key parameters of an optimally coupled passively Q-switched laser with V³⁺:YAG at 1342 nm are determined. These key parameters include the parameters of the gain medium, the saturable absorber and the resonator, which can maximize the pulse energy of singly Q-switched pulse. The optimal calculations for a diode-pumped passively Q-switched a-Nd:GdVO₄ laser with V³⁺:YAG saturable absorber are presented to demonstrate the numerical simulation applicable.     

基于石墨烯的1064nm连续锁模超短脉冲激光器

介绍了利用沉积在增透镜上的石墨烯薄膜作为可饱和吸收体、808 nm激光二极管端面泵浦Nd∶YVO4晶体的1 064 nm连续锁模激光输出特性。采用W型折叠谐振腔结构,在808 nm泵浦功率为80 W时,有稳定的连续锁模脉冲输出,平均输出功率达到185 mW;当抽运功率增加到160 W时,获得了中心波长1 0634 nm、脉冲宽度为518 fs、重复频率为667 MHz、最大平均输出功率为323 mW的百飞秒量级超短脉冲激光输出。实验结果表明：石墨烯具有优良的可饱和吸收性,在1 064 nm波段能够实现高功率、百飞秒量级连续锁模脉冲激光输出。     

基于石墨烯的1 064 nm连续锁模超短脉冲激光器

介绍了利用沉积在增透镜上的石墨烯薄膜作为可饱和吸收体、808 nm激光二极管端面泵浦Nd∶YVO4晶体的1 064 nm连续锁模激光输出特性。采用W型折叠谐振腔结构,在808 nm泵浦功率为8.0 W时,有稳定的连续锁模脉冲输出,平均输出功率达到185 mW;当抽运功率增加到16.0 W时,获得了中心波长1 063.4 nm、脉冲宽度为518 fs、重复频率为66.7 MHz、最大平均输出功率为323 mW的百飞秒量级超短脉冲激光输出。实验结果表明:石墨烯具有优良的可饱和吸收性,在1 064 nm波段能够实现高功率、百飞秒量级连续锁模脉冲激光输出。     

Zinc-oxide/PDMS-clad tapered fiber saturable absorber for passively mode-locked erbium-doped fiber laser

We propose and demonstrate a passively mode-locked erbium-doped fiber laser(EDFL) based on zincoxide/polydimethylsiloxane(Zn O/PDMS) saturable absorber(SA) that evanescently interacts with the light on a tapered fiber. The Zn O/PDMS composite is coated on the whole surface of the tapered fiber to guarantee the maximum efficiency of the SA device, with a measured insertion loss of 0.87 d B and a modulation depth of 6.4%. The proposed laser can generate soliton mode-locking operation at a threshold power of 33.07 m W. The generated output pulse yields a repetition rate and pulse width of 9.77 MHz and 1.03 ps, respectively. These results indicate that the proposed Zn O/PDMS-clad tapered fiber could be useful as an efficient, compatible, and low-cost SA device for ultrafast laser applications.     

Sequential generation of self-starting diverse operations in all-fiber laser based on thulium-doped fiber saturable absorber

Self-starting Q-switching, Q-switched mode-locking and mode-locking operation modes are achieved sequentially in an all-fiber erbium-doped fiber laser with thulium-doped fiber saturable absorber for the first time. The central wavelengths of Q-switching, Q-switched mode-locking and mode-locking operation modes are 1569.7 nm, 1570.9 nm, and 1572 nm, respectively. The mode-locking operation of the proposed fiber laser generates stable dark soliton with a repetition rate of 0.99 MHz and signal-to-noise ratio of 65 dB. The results validate the capability of generating soliton pulse by doped fiber saturable absorber. Furthermore, the proposed fiber laser is beneficial to the applications of optical communication and signal processing system.     

Optimization of passively Q-switched and mode-locked laser with Cr:YAG saturable absorber

By considering the Gaussian spatial distributions of the intracavity photon density and the initial population-inversion density, the coupled rate equations for a diode-pumped passively Q-switched and mode-locked (QML) laser with Cr⁴⁺:YAG saturable absorber are given. These coupled rate equations are solved numerically and the key parameters of an optimally coupled passively QML laser are determined for the first time. These key parameters include the parameters of the gain medium, the saturable absorber and the resonator, which can maximize the pulse energy of singly Q-switched envelope. The optimal calculations for a diode-pumped passively QML Nd:GdVO₄ laser with Cr⁴⁺:YAG saturable absorber are presented to demonstrate the numerical simulation applicable.     

Stochastic resonance in a laser with saturable absorber

Summary We have investigated, experimentally and theoretically, the occurrence of stochastic resonance (SR) in a laser with saturable absorber: a non-linear optical system presenting optical bistability and self-pulsed regimes for the laser output intensity. In the optical-bistability regime we have obtained an excellent demonstration of SR by studying Fourier spectra and residence time distributions; operating just below the Hopf bifurcation that originates pulsed periodic regime we have obtained experimental evidence of the SR phenomenon. For operation close to the Hopf bifurcation, the theoretical analysis (performed through numerical simulations) has demonstrated that simultaneous presence of noise and periodic forcing generates excursions far from equilibrium; from the locking between these excursions and periodic forcing the SR phenomenon may arise. Paper presented at the International Workshop “Fluctuations in Physics and Biology: Stochastic Resonance, Signal Processing and Related Phenomena”, Elba, 5–10 June 1994.     

高损伤阈值可饱和吸收体锁模脉冲光纤激光器的研究进展

光纤激光器作为推动各领域发展的基础硬件,在轨道交通、光纤通信、新材料制造、动力电池加工、军事国防和医疗等领域都有广泛的应用价值.光纤激光器被动锁模技术的核心器件是可饱和吸收体,它对光纤激光器实现高能量、窄脉宽、大功率的激光输出起决定性作用.依托传统材料和传统结构的可饱和吸收体,由于无散热机制,光作用到材料上的光斑大小与光纤出射直径几乎相同,容易超过可饱和吸收体的损伤阈值从而造成损坏.因此,调整可饱和吸收体制备工艺和结构,对于提高可饱和吸收体的损伤阈值,实现性能优良、稳定性高的脉冲激光具有重要意义.本文综述了高损伤阈值可饱和吸收体国内外研究现状,指出了高损伤阈值可饱和吸收体可能的发展方向.     

基于铋可饱和吸收体的超快激光产生

采用磁控溅射沉积法在微纳光纤表面上镀一层纳米级厚度的铋薄膜,制备了一种微纳光纤-铋膜结构的可饱和吸收体.在1.5μm处的非线性光调制深度为14%.将其应用到掺铒光纤激光器中,在1.5μm波段获得稳定的超快脉冲激光产生,脉宽为357 fs,输出功率为45.4 mW,单脉冲能量为2.39 nJ,信噪比为84 dB.实验结果表明,利用磁控溅射法可制备出大调制深度的可饱和吸收体,为获得高能量超短脉冲激光输出提供新方案.     

Q-switched and mode-locked diode-pumped Nd:YVO4 laser with an intracavity composite semiconductor saturable absorber

We have demonstrated a passively Q-switched and mode-locked Nd:YVO₄ laser with an intracavity composite semiconductor saturable absorber (ICSSA). Stable Q-switched and mode-locked pulses with Q-switched envelope pulse duration of 180 ns and pulse repetition rate of 72 KHz have been obtained. The maximum average output power was 1.45 W at 8 W incident pump power. The repetition rate of the mode-locked pulses inside the Q-switched envelope was 154 MHz. Experimental results revealed that this ICSSA was suitable for Q-switched and mode-locked solid-state lasers.     

Periodic adjustment of the position of a laser beam spot on a semiconductor saturable absorber mirror in a passively mode-locked solid-state laser

A laser diode end-pumped passively mode-locked Nd:YVO₄ solid-state laser with a semiconductor saturable absorber mirror (SESAM), in which the intracavity laser beam spot on the SESAM can be adjusted periodically, is investigated. Inserting a rectangular prism (RP) into the laser cavity is a promising approach towards the goal of periodically moving the position of the focus spot of the intracavity pulse on the SESAM surface to avoid the long-time irradiation of the laser beam on the same position, thereby solving a series of problems caused by damage to the SESAM and greatly prolonging its usage life. The adjustment of the rectangular prism in the laser cavity does not break the stable continuous wave (CW) mode-locked condition. The laser generates a stable picosecond pulse sequence at 1064 nm with an output power of 3.6 W and a pulse width of 14 ps. The instabilities of the output power and the pulse width are 1.77% and 4.5%, respectively.     

含负克尔效应半导体可饱和吸收镜的五镜腔飞秒钛宝石激光器的理论分析

基于半导体可饱和吸收镜(SESAM)的负克尔效应，对含SESAM的五镜腔进行了理论计算和分析.结果表明，由于SESAM的负克尔效应，与没有SESAM的相比，锁模激光器的稳区在上稳区的内边缘有明显扩展，这使得激光器锁模启动的工作点更加靠近直流运转时的稳区边缘，从而获得更大的非线性因子.这说明SESAM的可饱和吸收机理具有锁模自启动效应外，其负克尔效应也有助于锁模的自启动. 关键词： 半导体可饱和吸收镜 负克尔效应 五镜腔