Preparation and characterization of ZnS nanoparticles deposited on montmorillonite

ZnS nanoparticles were prepared and deposited on montmorillonite (MMT) in the presence of cetyltrimethylammonium (CTA). UV spectrometry and transmission electron microscopy (TEM) proved the formation of nanoparticles with diameters ranging from 3 nm to 5 nm. Selected-area electron diffraction (SAED) patterns revealed the presence of romboedric ZnS. The band gap energy of nanosize ZnS was estimated at 3.89 ± 0.03 eV. Photoluminescence spectra exhibited a strong emission band between 300 nm and 600 nm explained by the vacant ZnS nanostructure. The prepared ZnS-montmorillonite nanocomposite (ZnS-MMT) was used for the photocatalytic reduction of CO(2) providing a considerably high efficiency that exceeded 5-6-fold the results of commercial TiO(2) Degussa P25. The main reaction products were hydrogen and methane. Methanol and carbon oxide were also observed in about 7-fold lower amounts. The stability of ZnS against oxidation was confirmed by the determination of sulphate using capillary isotachophoresis.     

Highly efficient visible-light-driven photocatalytic hydrogen production of CdS-cluster-decorated graphene nanosheets

The production of clean and renewable hydrogen through water splitting using photocatalysts has received much attention due to the increasing global energy crises. In this study, a high efficiency of the photocatalytic H(2) production was achieved using graphene nanosheets decorated with CdS clusters as visible-light-driven photocatalysts. The materials were prepared by a solvothermal method in which graphene oxide (GO) served as the support and cadmium acetate (Cd(Ac)(2)) as the CdS precursor. These nanosized composites reach a high H(2)-production rate of 1.12 mmol h(-1) (about 4.87 times higher than that of pure CdS nanoparticles) at graphene content of 1.0 wt % and Pt 0.5 wt % under visible-light irradiation and an apparent quantum efficiency (QE) of 22.5% at wavelength of 420 nm. This high photocatalytic H(2)-production activity is attributed predominantly to the presence of graphene, which serves as an electron collector and transporter to efficiently lengthen the lifetime of the photogenerated charge carriers from CdS nanoparticles. This work highlights the potential application of graphene-based materials in the field of energy conversion.     

Synthesis and Characterization of CdS Nanoparticles via Cyclic Microwave from Cadmium Oxalate

The present study reports synthesis and characterization of CdS nanoparticles prepared by cyclic microwave route with the use of [Cd(C₂O₄)·3H₂O] powder as a precursor. The products, with an average size ~15 nm, were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray microanalysis, thermogravimetric analysis, transmission electron microscopy and Fourier transform infrared spectroscopy. Optical property of obtained product was investigated by photoluminescence spectroscopy. The prepared nanostructures displayed a very strong luminescence at 528 nm (2.34 eV) at room temperature.     

溶胶凝胶法制备CdS/SiO2量子点玻璃的研究

通过溶胶凝胶转变过程制备了硫化镉／二氧化硅量子点复合玻璃材料（硫化镉在复合材料中的最大掺杂质量比可达到30％）；并针对两种催化剂对复合体系的不同影响对这一类体系的物理化学性质进行了较为系统的研究．复合体系的溶胶凝胶转变点可通过对复合溶胶粘度随时间变化的观测而确定．TEM法与低频Raman散射法的测定表明实验制备的样品中CdS颗粒基本为nm级的球形粒子。其CdS颗粒粒径随CdS含量增加而增大。随CdS／SiO2量子点玻璃材料中CdS颗粒粒径的减小，其吸收光谱中的吸收边界与常规尺寸颗粒的吸收光谱边界相比有明显的蓝移，体现出显著的量子效应．适宜的热处理过程对复合材料中CdS颗粒粒径的减小和量子效应的增强起着有利的作用．     

Construction of CdS Nanoparticle Chain on DNA Template

Salmon sperm DNA was used as template to assembly and nucleate CdS nanoparticles.Transmission electron microscopy(TEM)images showed that the CdS nanoparticles fromed unique nanostructure which present regular and parallel chains along DNA molecular chaing.The width of every chain was about 3 nm.Raman and Xray photoelectron energy spectroscopy(XPS) confirmed that the nucleation sites of CdS nanoparticles were phosphate acid groups of DNA.     

Photodissociation dynamics of gaseous CpCo(CO)2 and ligand exchange reactions of CpCoH2 with C3H4, C3H6, and NH3

The photodissociation dynamics of CpCo(CO)(2) was studied in a molecular beam using photofragment translational energy spectroscopy with 157 nm photoionization detection of the metallic products. At 532 and 355 nm excitation, the dominant one-photon channel involved loss of a single CO ligand producing CpCoCO. The product angular distributions were isotropic, and a large fraction of excess energy appeared as product vibrational excitation. Production of CpCO + 2CO resulted from two-photon absorption processes. The two-photon dissociation of mixtures containing CpCo(CO)(2) and H(2) at the orifice of a pulsed nozzle was used to produce a novel 16-electron unsaturated species, CpCoH(2). Transition metal ligand exchange reactions, CpCoH(2) + L → CpCoL + H(2) (L = propyne, propene, or ammonia), were studied under single-collision conditions for the first time. In all cases, ligand exchange occurred via 18-electron association complexes with lifetimes comparable to their rotational periods. Although ligand exchange reactions were not detected from CpCoH(2) collisions with methane or propane (L = CH(4) or C(3)H(8)), a molecular beam containing CpCoCH(4) was produced by photolysis of mixtures containing CpCo(CO)(2) and CH(4).     

介观结构SiO2/CdO纳米复合物为前驱体原位水热合成半导体CdSe和CdS纳米晶

以高度有序的介观结构SiO₂/CdO纳米复合物为前驱体,在硒源或硫源存在的还原性条件下,利用原位水热反应,合成了介观结构SiO₂/CdSe及SiO₂/CdS纳米复合物,除去SiO₂后,得到半导体CdSe及CdS纳米晶.通过X射线衍射(XRD),高分辨率透射电镜(HRTEM),X射线能散射谱(EDX)及选区电子衍射(SAED)等手段对产物进行了组成和结构表征.结果表明,介观结构SiO₂主体材料在合成过程中起到了一定的形貌和尺寸限制作用,得到的CdSe和CdS均为直径在8 nm左右的类球形六方相纳米晶.     

冷等离子体作用下CH_4-CO_2转化制合成气

在常温常压条件下 ,利用电晕放电 ,使 CH4 - CO2 混合气转化生成合成气 .结果表明 ,该过程中 CH4 和 CO2 的转化率与反应体系能量密度、原料气配比和流速等有关 .在 0 .1MPa气压 ,能量密度为 10 50 k J/ mol(反应体系温度低于 50 0 K) ,n( CH4 )∶ n( CO2 ) =1∶ 2条件下 CH4 和 CO2 的转化率分别超过 60 %和 50 % ,超出了热力学平衡转化率的限制 .通过调配原料的配比 ,可以得到不同 n( H2 ) / n( CO)比值的产物 .对该体系的反应机理进行了探讨 .     

Continuous tuning of cadmium sulfide and zinc sulfide nanoparticle size in a water-in-supercritical carbon dioxide microemulsion

The size and size dispersion of cadmium sulfide and zinc sulfide semiconductor nanoparticles can be continuously tuned over a wide range of values by adjusting the density of the fluid phase in water-in-supercritical CO2 microemulsions. The average size of the ZnS nanoparticles decreases linearly from approximately 9.1 to 1.9 nm with increasing fluid density from 0.86 to 0.99 g cm(-3) at a water-to-surfactant ratio (W value) of 10. At a W value of 6, the particle size can be tuned from 7.0 to 1.5 nm in the same density range. In the case of CdS nanocrystals, the size varied from 7.1 to 2.0 nm when the W value was 10 and from 4.0 to 1.3 nm when the W value employed was 6, in the same density range. Monodispersive CdS and ZnS nanoparticles were synthesized by chemical reaction of cadmium or zinc nitrate with sodium sulfide, using two water-in-supercritical CO2 microemulsions as nanoreactors followed by protection with a fluorinated-thiol stabilizer. The stabilizer is introduced at 6 and 16 minutes after the mixing of the two microemulsions where the intensity of the characteristic absorption peak due to the quantum confinement properties of the CdS and ZnS nanoparticles (280 and 360 nm) reaches a maximum, respectively. The supercritical CO2 microemulsion method represents a simple approach to use a density-tunable solvent for synthesizing size-controlled semiconductor nanoparticles over a broad range of values.     

Synthesis and characterization of ZnS-montmorillonite nanocomposites and their application for degrading eosin B

Nanocomposites of zinc sulfide (ZnS) and montmorillonite (MMT) were prepared via a hydrothermal route. In this method, the MMT treated with hexadecyltrimethyl ammonium bromide (HTAB) aqueous solution was dispersed in the aqueous solution of thiourea and Zn(OOCHCH(3))(2)2H(2)O, and heated at 170 degrees C for about 4 h, resulting in ZnS-MMT composites. The as-prepared nanocomposites were characterized with X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen sorption analysis. It was demonstrated that the interlayer space of MMT was enlarged from 0.98 to 3.77 nm after the treatment with HTAB aqueous solution, and the ZnS nanoparticles were deposited on the layers of MMT. Nitrogen sorption analysis demonstrated that the specific surface area of the samples decreased from 39.2 m(2)/g of the pristine MMT to 5.9 m(2)/g of the final ZnS-MMT composites. The resulting ZnS-MMT nanocomposites (50.0 mg) could degrade eosin B completely in aqueous solution (75 ml, 3.2x10(-5) M) within 20 min under UV irradiation.     

CH2(X 3B1)自由基与O2的反应

用时间分辨富里叶红外发射谱仪（ＴＲ－ＦＴＩＲＳ）研究了ＣＨ２（Ｘ＾３Ｂ１）自由基与Ｏ２反应的通道及产物的振动动态布居，基电子态自由基ＣＨ２（Ｘ＾３Ｂ１）由３５１ｎｍ紫外激光光解ＣＨ２ＣＯ生成，观测到振动发态反应产物ＣＯ（ｖ≤１０），ＣＯ２（ｖ３≤７）ＯＨ（Ｈ２Ｏ）和Ｈ２ＣＯ的红外发射，证实存在生成Ｈ２ＣＯ的通道，由光谱拟合得到不同时刻ＣＯ（ｖ）和ＣＯ２（ｖ３）的相对振动布居，发现ｖ＝４能级的布居数     

Slice imaging of the photodissociation of acetaldehyde at 248 nm. Evidence of a roaming mechanism

The photodissociation of acetaldehyde in the molecular channel yielding CO and CH(4) at 248 nm has been studied, probing different rotational states of the CO(nu = 0) fragment by slice ion imaging using a 2+1 REMPI scheme at around 230 nm. From the slice images, clear evidence of the co-existence of two different mechanisms has been obtained. One of the mechanisms is consistent with the well-studied conventional transition state in which CO products appear rotationally excited, and the second is consistent with a roaming mechanism. This roaming mechanism is characterized by a low rotational energy disposal into the CO fragment as well as by a very low kinetic energy release, corresponding to a high internal energy in the CH(4) counter-fragment.     

内嵌硫化镉与上转换纳米颗粒的二氧化钛复合纳米管用于近红外光驱动光催化

由于近红外光在太阳光谱中占44%,因此,近红外光驱动的光催化剂的研制具有十分重要的意义.上转换发光材料可将低能量的近红外光子转换为高能光子,这种高能光子可以通过构建荧光共振转移系统将能量转移并活化量子效率较高的半导体材料,对于太阳能的转化利用具有潜在的应用前景.在本文中,通过胶体化学的过程在电纺丝制备的内嵌CdS纳米颗粒以及上转换荧光纳米颗粒(UCNPs)的二氧化硅复合纳米纤维表面外延生长一层二氧化钛层,通过高温煅烧得到二氧化钛复合纳米管.我们通过二氧化硅结构将CdS纳米颗粒与上转换荧光纳米颗粒紧紧束缚在一起,实现较高的荧光共振能量转移.而且,选择β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)作为纳米能量转换器,替代以前研究工作中使用的β-NaYF4:Yb(30%),Tm(0.5%)或者β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4纳米颗粒,来进一步提高近红外光的转换效率.通过透射电子显微镜照片很清楚的观察到制备的TiO2复合纳米管内部内嵌有大量的CdS与上转换纳米颗粒.通过X-射线衍射以及X-射线光电子能谱能仪器对产物的物相以及表面的化学组成进行了细致的表征.结果显示,通过本实验方法已经成功获得了TiO2复合纳米管.用稳态与瞬态荧光仪研究了最终样品的荧光性质.研究结果揭示,与上转换纳米颗粒以及二氧化硅复合纳米纤维相比,复合二氧化钛纳米管可以将上转换荧光纳米颗粒的(UV-Vis)部分荧光完全淬灭了.特别是,铒离子的荧光(650 nm)也被有效淬灭转移,说明本研究采用β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)纳米能量转换器,可以提高近红外光的转换效率,紫外-可见吸收光谱证实,这种二氧化钛纳米管在紫外-可见光区中的吸收光谱与β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)纳米颗粒的荧光光谱具有较大的重叠,使得上转换荧光纳米颗粒与CdS以及二氧化钛组分之间的荧光共振转移的效率大大提高,进而会显著提高光催化的效果.以罗丹明染料作为污染物为模型,我们研究了罗丹明染料在氙灯下或者近红外光光照下的光催化分解实验.研究结果表明,90%的罗丹明染料分子在20 min内就被降解掉,效率高于其它的近红外光催化剂.上转换荧光纳米颗粒的能量转换效率可以得到大幅度提高,本研究工作中制备的光催化剂利用太阳能的效率将会得到极大提高,在未来为能源危机以及环境保护提供一种可供选择的方法与技术.     

Synthesis and characterization of dendrimer templated supported bimetallic Pt-Au nanoparticles

Bimetallic dendrimer-stabilized nanoparticles (DSNs) were used to prepare supported Pt-Au catalysts within the bulk miscibility gap for this binary system. Hydroxy-terminated generation 5 PAMAM dendrimers were used to prepare Cu(0) nanoparticles (NPs). The Cu(0) NPs were subsequently used to reduce K(2)PtCl(4) and HAuCl(4), preparing stabilized bimetallic Pt-Au NPs with a 1:1 stoichiometry. The stabilized NPs were adsorbed onto a high surface area silica support and thermally activated to remove the dendrimers. Transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), and infrared spectroscopy of adsorbed CO showed that this preparation route resulted in NPs in which the two metals are intimately mixed and that the majority of the bimetallic NPs were smaller than 3 nm. Further, the bimetallic NPs were highly active for CO oxidation catalysis near room temperature and showed evidence of CO induced restructuring at ambient temperatures.     

Mesoporous cadmium sulfide nanoparticles derived from a new cadmium anthranilato complex: Characterization and induction of morphological abnormalities in pathogenic fungi

A cadmium complex of the general formula Cd(C₁₃H₉O₂NCl)₂(H₂O)₂ {C₁₃H₉O₂NCl = 2-(4-chlorophenylamino)benzoate} was synthesized and characterized regarding its CHN data, solution molar conductivity and spectroscopic (UV–Vis. and IR) properties. Cadmium sulfide nanoparticles (CdS NPs) were grown form the microcrystalline complex and thiourea via a hydrothermal route. The as-prepared NPs were assigned based on X-ray powder diffraction (PXRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM) and Brunauer – Emmett – Teller (BET) surface area measurements. The CdS absorption and emission spectra were also recorded that revealed an energy gap of 2.47 eV and large Stokes shift of 130 nm. For the as-prepared NPs, the measurements have also indicated a mesoporous structure and an average particle size of 20–28 nm associated with an average pore diameter of 11.21 nm. The as-synthesized CdS NPs acted as antifungal controlling agent against human and plant pathogenic fungi of serious environmental and health concerns. The NPs at concentration of 200 ppm inhibited several fungi with inhibition efficiency of 100% against Aspergillus ustus Au-28. The nanoparticles induced morphological abnormalities in fungal mycelia, conidia and vesicle. Additionally, they inhibited the conidia septum formation, accelerated the chlamydospores generation and enlarged the yeast cells.     

Radially oriented cellulose triacetate chains on gold nanoparticles

Cellulose triacetate (CTA) derivatives having a disulfide group at the reducing-end (CTA2S, CTA13S, CTA41S), with number average degrees of polymerization (DP_ns) of 2, 13 and 41, respectively, were prepared. The CTA-self-assembled gold nanoparticles (CTA2Au, CTA13Au, and CTA41Au) were obtained through the reduction of gold salt (HAuCl₄) with CTASs. The diameters (d) and the interparticle distances (L) of the gold cores were analyzed by transmission electron microscopy (TEM) observations. The d values of CTA2Au, CTA13Au, and CTA41Au, were 8.7, 7.9, and 13.4 nm respectively. The L values of CTA2Au, CTA13Au, and CTA41Au, were 2.8, 6.3, and 20.9 nm, respectively, and agreed well with the molecular length (l) of CTAS chains (ls of CTA2S, CTA13S, CTA41S = 2.0, 7.5, 21.5 nm, respectively). The hydrodynamic diameters (D) of CTAAu nanoparticles in chloroform solution, measured by dynamic light scattering (DLS), were larger than the d values and increased with the increase in the molecular length of the CTA chains. The CTAS chain was found to work as an excellent stabilizer of the gold nanoparticles in both solid state and solution. The molecular length of CTA chains controlled the size and the alignment of the gold nanoparticles. As a result, the radially oriented CTA chains on the gold nanoparticles were successfully prepared.     

Understanding the effect of cobalt particle size on Fischer-Tropsch synthesis: surface species and mechanistic studies by SSITKA and kinetic isotope effect

Co/γ-Al(2)O(3) catalysts with particle sizes in the range of 4-15 nm were investigated by isothermal hydrogenation (IH), temperature programmed hydrogenation (TPH), and steady-state isotopic transient kinetic analysis (SSITKA). Kinetic isotope effect experiments were used to probe possible mechanisms on Co/γ-Al(2)O(3) with different particle size. It was found that CO dissociated on Co/γ-Al(2)O(3) catalysts at 210 °C. The total amount of CO(2) formed following the dissociation depends on the cobalt crystal size. O-Co binding energy was found to be highly dependent on the Co metal particle size, whereas similar C-Co binding energy was found on catalysts with different Co particle size. Very strongly bonded carbon and oxygen surface species increased with decreasing particle size and acted as site blocking species in the methanation reaction. SSITKA experiments showed that the intrinsic activity (1/τ(CH(x))) remained constant as the particle size increased from 4 to 15 nm. The number of surface intermediates (N(CH(x))) increased with increasing particle size. The apparent activation energies were found similar for these catalysts, about 85 kJ/mol. D(2)-H(2) switches further confirmed that the particle size did not change the kinetically relevant steps in the reaction. The reactivity of the active sites on the 4 nm particles was the same as those on the 8, 11, and 15 nm particles, and only the number of total available surface active sites was less on the 4 nm particles than on the others.     

Ni/Al_2O_3催化剂上CH_4部分氧化制合成气机理的IR研究(英文)

在２．９％（ｗｔ）Ｎｉ／Ａｌ２Ｏ３催化剂上用ｉｎｓｉｔｕＦＴＩＲ研究了ＣＨ４部分氧化制合成气的反应机理。结果表明，催化剂表面的活性碳物种与化学吸附的Ｏ原子反应生成ＣＯ；ＣＨ４／Ｏ２（２：ｌ）混合气在催化剂表面吸附的ＩＲ谱图表明只有Ｈ２Ｏ和ＣＯ２存在，说明ＣＨ４和ＣＯ２的重整反应没有发生。因此，我们认为ＣＯ和Ｈ２是一级产物。     

IR STUDIES ON MECHANISM OF DIRECT OXIDATION OF METHANE TO SYNTHESIS GAS OVER A Ni/Al2O3 CATALYS

The mechanism of the CH4/O2 to syngas reaction has been investigated by FT-IR over a 2.9%(wt)Ni/Al2O3. IR spectra of adsorption of CH4 indicate that chemisorbed O atoms can react selectively with active carbon species (arising from CH4 decomposition) to give CO. IR spectra of adsorption of CH4/O2(2:1 mole ratio) mixture show that CO2 and H2O are the detectable products with no CO, revealing that the reforming of remaining CH4 would not take place. We propose that CO and H2 are primary products in this reaction.     

Study of cetyltrimethylammonium and cetylpyridinium adsorption on montmorillonite

Adsorption of cetyltrimethylammonium (CTA) and cetylpyridinium (CP) onto Na-rich montmorillonite (MMT) was studied. For this purpose, the adsorption isotherms of CTA and CP, along with desorption curves of metal cations (Na+, K+, Ca2+, Mg2+), were obtained by means of capillary isotachophoresis and atomic absorption spectrometry. Infrared, X-ray diffraction pattern, specific surface area, porosity, and moisture adsorption measurements of montmorillonite revealed that CTA and CP were adsorbed in monolayer arrangements. CTA is assumed to be attached to the negatively charged MMT surface mainly by electrostatic forces. On the other hand, CP, adsorbed in higher amounts, can be additionally bound via other interactions of pyridinium rings, such as induced and pi-pi interactions. By the surfactant adsorption, the montmorillonite surface became hydrophobic and its micro- and mesopores were significantly diminished. Using scanning electron microscopy, aggregation of such organically modified MMT particles was observed.