μ3‐η2:η2:η2‐Coordination of Primary Silane on a Triruthenium Plane

A μ₃‐η²:η²:η²‐silane complex, [(Cp*Ru)₃(μ₃‐η²:η²:η²‐H₃SitBu)(μ‐H)₃] ( 2 a ; Cp*=η⁵‐C₅Me₅), was synthesized from the reaction of [{Cp*Ru(μ‐H)}₃(μ₃‐H)₂] ( 1 ) with tBuSiH₃. Complex 2 a is the first example of a silane ligand adopting a μ₃‐η²:η²:η² coordination mode. This unprecedented coordination mode was established by NMR and IR spectroscopy as well as X‐ray diffraction analysis and supported by a density functional study. Variable‐temperature NMR analysis implied that 2 a equilibrates with a tautomeric μ₃‐silyl complex ( 3 a ). Although 3 a was not isolated, the corresponding μ₃‐silyl complex, [(Cp*Ru)₃(μ₃‐η²:η²‐H₂SiPh)(H)(μ‐H)₃] ( 3 b ), was obtained from the reaction of 1 with PhSiH₃. Treatment of 2 a with PhSiH₃ resulted in a silane exchange reaction, leading to the formation of 3 b accompanied by the elimination of tBuSiH₃. This result indicates that the μ₃‐silane complex can be regarded as an “arrested” intermediate for the oxidative addition/reductive elimination of a primary silane to a trinuclear site.     

Ca2+‐Induced Oxygen Generation by FeO42− at pH 9–10

Although FeO₄^2? (ferrate(IV)) is a very strong oxidant that readily oxidizes water in acidic medium, at pH 9–10 it is relatively stable (<2 % decomposition after 1 h at 298 K). However, FeO₄^2? is readily activated by Ca²⁺ at pH 9–10 to generate O₂. The reaction has the following rate law: d[O₂]/dt=k_Ca[Ca²⁺][FeO₄^2?]². ¹⁸O‐labeling experiments show that both O atoms in O₂ come from FeO₄^2?. These results together with DFT calculations suggest that the function of Ca²⁺ is to facilitate O–O coupling between two FeO₄^2‐ions by bridging them together. Similar activating effects are also observed with Mg²⁺ and Sr²⁺.     

Kinetics and Mechanism of Oxidation of S2O32− by a Co‐Bound μ‐Amido‐μ‐Superoxo Complex

In acetate buffer media (pH 4.5–5.4) thiosulfate ion (S₂O₃^2?) reduces the bridged superoxo complex, [(NH₃)₄Co^III(μ‐NH₂,μ‐O₂)Co^III(NH₃)₄]⁴⁺ ( 1 ) to its corresponding μ‐peroxo product, [(NH₃)₄Co^III(μ‐NH₂,μ‐O₂)Co^III(NH₃)₄]³⁺ ( 2 ) and along a parallel reaction path, simultaneously S₂O₃^2? reacts with 1 to produce the substituted μ‐thiosulfato‐μ‐superoxo complex, [(NH₃)₄Co^III(μ‐S₂O₃,μ‐O₂)Co^III(NH₃)₄]³⁺ ( 3 ). The formation of μ‐thiosulfato‐μ‐superoxo complex ( 3 ) appears as a precipitate which on being subjected to FTIR shows absorption peaks that support the presence of Co(III)‐bound S‐coordinated S₂O₃^2? group. In reaction media, 3 readily dissolves to further react with S₂O₃^2? to produce μ‐thiosulfato‐μ‐peroxo product, [(NH₃)₄Co^III(μ‐S₂O₃,μ‐O₂)Co^III(NH₃)₄]²⁺ ( 4 ). The observed rate (k₀) increases with an increase in [T_Thio] ([T_Thio] is the analytical concentration of S₂O₃^2?) and temperature (T), but it decreases with an increase in [H⁺] and the ionic strength (I). Analysis of the log A_t versus time data (A is the absorbance of 1 at time t) reveals that overall the reaction follows a biphasic consecutive reaction path with rate constants k₁ and k₂ and the change of absorbance is equal to {a₁ exp(–k₁t) + a₂ exp(–k₂t)}, where k₁ > k₂.     

Clusterkomplexe [M2Rh(μ‐PCy2)(μ‐CO)2(CO)8] mit triangularem Metallgerüst RhM2 (M = Mn,Re; M2 = MnRe): Synthese,Struktur, Ringöffnungen und Katalysatoreigenschaften für die Isomerisierung und Hydroformylierung von 1‐Hexen

Cluster Complexes [M₂Rh(μ‐PCy₂)(μ‐CO)₂(CO)₈] with Triangular Core of RhM₂ (M = Re, Mn; M₂ = MnRe): Synthesis, Structure, Ring Opening Reaction, and Properties as Catalysts for Hydroformylation and Isomerisation of 1‐Hexene The salts PPh₄[M₂(μ‐H)(μ‐PCy₂)(CO)₈] and Rh(COD)[ClO₄] were in equimolar amounts reacted at –40 to –15 °C in the presence of CO_(g) in CH₂Cl₂/methanol solution under release of PPh₄[ClO₄] to intermediates. Such species formed in a selective reaction the unifold unsaturated 46 valence electrons title compounds [M₂Rh(μ‐PCy₂)(μ‐CO)₂(CO)₈] (M = Re 1 , Mn 2 ; M₂ = MnRe 3 ) in yields of > 90%; analogeous the derivatives with the PPh₂ bridge could the obtained (M = Re 4 , Mn 5 ). From these clusters the molecular structure of 2 was determined by a single crystal X‐ray analysis. The exchange of the labil CO ligand attached at the rhodium ring atom in 1 – 3 against selected tertiary and secondary phosphanes in solution gave the substitution products [M₂RhL(μ‐PCy₂)(μ‐CO)₂(CO)₇] (M = Re: L = PMe₃ 6 , P(n‐Bu)₃ 7 , P(n‐C₆H₄SO₃Na)₃ 8 , HPCy₂ 9 , HPPh₂ 10 , HPMen₂ 11 , M₂ = MnRe: L = HPCy₂ 12 ) nearly quantitative. Such dimanganese rhodium intermediates ligated with secondary phosphanes were converted in a subsequent reaction to the ring‐opened complexes [MnRh(μ‐PCy₂)(μ‐H)(CO)₅Mn(μ‐PR₂)(CO)₄] (M = Mn: R = Cy 13 , Ph 14 , Mn 15 ). The molecular structure of 13 , which showed in the time scale of the ³¹P NMR method a fluxional behaviour, was determined by X‐ray structure analysis. All products obtained were always characterized by means of υ(CO)Ir, ¹H and ³¹P NMR measurements. From the reactants of hydroformylation process, CO_(g) 1 – 2 in different solvents afforded at 20 °C under a reversible ring opening reaction the valence‐saturated complexes [MRh(μ‐PCy₂)(CO)₇M(CO)₅] (M = Re 16 , Mn 17 ), whereas the reaction of CO_(g) and the ring‐opened 13 to [MnRh(μ‐PCy₂)(μ‐H)(CO)₆Mn(μ‐PCy₂)(CO)₄] ( 18 ) was as well reversible. The molecular structures of 17 and 18 were determined by X‐ray analysis. The υ(CO)IR, ¹H and ³¹P NMR measurements in pressure‐resistant reaction vessels at 20 °C ascertained the heterolytic splitting of hydrogen in the reaction of 1 – 2 dissolved in CDCl₃ or THF‐d₈ under formation of product monoanions [M₂Rh(μ‐CO)(μ‐H)(μ‐PCy₂)(CO)₉]^– (M = Re, Mn), which also were formed by the reaction of NaBH₄ and 1 – 2 . Finally, the substrate 1‐hexene and 1 and 3 gave under the release of the labil CO ligand an η²‐coordination pattern of hexene, which was weekened going from the Re to the Mn neighbor atoms. After the results of the catalytic experiments with 1 and 2 as catalysts, such change in the bonding property revealed an advantageous formation of hydroformylation products for the dirhenium rhodium catalyst 1 and that of isomerisation products of hexene for the dimanganese rhodium catalyst 2 . Par example, 1 generated n‐heptanal/2‐methylhexanal in TOF values of 246 [h^–1] (n/iso = 3.4) and the c,t‐hexenes in that of 241 [h^–1]. Opposotite to this, 2 achieved such values of 55 [h^–1] (n/iso = 3.6) and 473 [h^–1]. A triphenylphosphane substitution product of 1 increased the activity of the hydroformylation reaction about 20%, accompanied by an only gradually improved selectivity. The hydrogenation products like alcohols and saturated hydrocarbons known from industrial hydroformylation processes were not observed. The metals manganese and rhenium bound at the rhodium reaction center showed a cooperative effect.     

Synthesis and Reactivity of 2,2,4,4–Tetrakis(tri–tert–butoxysilanethiolato)–1,3,2,4–dithiadistannetane – Crystal and Molecular Structures of Two Polymorphic Forms

The title compound, [Sn(μ–S){SSi(O^tBu)₃}₂]₂ ( 1 ), containing four–coordinated tin(IV), crystallizes in two polymorphic modifications. The orthorhombic 1a –form has been obtained in the reaction of (^tBuO)₃SiSH and Et₃N with SnCl₂, whereas the triclinic 1b –form in the reaction with SnCl₄ as substrate. The crystal and molecular structures of both polymorphs ( 1a as a redetermination) have been determined by a single–crystal X–ray diffraction study at room temperature. The title compound was shown to react with ammonia and ammonia complexes of some d–block metal cations giving products of Sn–S bond cleavage.     

Synthesis of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines from β‐alkoxy‐α,β‐unsaturated trihalomethyl ketones

The synthesis of a novel series of twelve 4‐(trihalomethyl)dipyrimidin‐2‐ylamines, from the cyclo‐condensation reaction of 4‐(trichloromethyl)‐2‐guanidinopyrimidine, with β‐alkoxyvinyl trihalomethyl ketones, of general formula: X₃C‐C(O)‐C(R²)=C(R¹)‐OR, where: X = F, Cl; R = Me, Et, ‐(CH₂)₂‐, ‐(CH₂)₃‐; R¹ = H, Me; R² = H, Me, ‐(CH₂)₂‐, ‐(CH₂)₃‐, is reported. The reactions were carried out in acetonitrile under reflux for 16 hours, leading to the dipyrimidin‐2‐ylamines in 65‐90% yield. Depending on the substituents of the vinyl ketone, tetrahydropyrimidines or aromatic pyrimidine rings were obtained from the cyclization reaction. When X = Cl, elimination of the trichloromethyl group was observed during the cyclization step. The structure of 4‐(trihalomethyl)dipyrimidin‐2‐ylamines was studied in detail by ¹H‐, ¹³C‐ and 2D‐nmr spectroscopy.     

The hydroxyl radical reaction rate constant and products of 3,5‐dimethyl‐1‐hexyn‐3‐ol

A bimolecular rate constant,k_DHO, of (29 ± 9) × 10^?12 cm³ molecule^?1 s^?1 was measured using the relative rate technique for the reaction of the hydroxyl radical (OH) with 3,5‐dimethyl‐1‐hexyn‐3‐ol (DHO, HC?CC(OH)(CH₃)CH₂CH(CH₃)₂) at (297 ± 3) K and 1 atm total pressure. To more clearly define DHO's indoor environment degradation mechanism, the products of the DHO + OH reaction were also investigated. The positively identified DHO/OH reaction products were acetone ((CH₃)₂C?O), 3‐butyne‐2‐one (3B2O, HC?CC(?O)(CH₃)), 2‐methyl‐propanal (2MP, H(O?)CCH(CH₃)₂), 4‐methyl‐2‐pentanone (MIBK, CH₃C(?O)CH₂CH(CH₃)₂), ethanedial (GLY, HC(?O)C(?O)H), 2‐oxopropanal (MGLY, CH₃C(?O)C(?O)H), and 2,3‐butanedione (23BD, CH₃C(?O)C(?O)CH₃). The yields of 3B2O and MIBK from the DHO/OH reaction were (8.4 ± 0.3) and (26 ± 2)%, respectively. The use of derivatizing agents O‐(2,3,4,5,6‐pentalfluorobenzyl)hydroxylamine (PFBHA) and N,O‐bis(trimethylsilyl)trifluoroacetamide (BSTFA) clearly indicated that several other reaction products were formed. The elucidation of these other reaction products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible DHO/OH reaction mechanisms based on previously published volatile organic compound/OH gas‐phase reaction mechanisms. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 534–544, 2004     

Mechanistic disparity in the electron transfer reactions of thiosulfate with di‐μ‐oxo‐bis(1,4,8,11‐tetraazacyclotetradecane)‐dimanganese(III,IV) and di‐μ‐oxo‐bis(1,4,7,10‐tetraazacyclododecane)‐dimanganese(III,IV) complexes

A comparative kinetic study of the reactions of two mixed valence manganese(III,IV) complexes of macrocyclic ligands, [L¹Mn^IV(O)₂Mn^IIIL¹], 1 (L¹ = 1,4,8,11‐tetraazacyclotetradecane) and [L²Mn^IV(O)₂Mn^IIIL²], 2 (L² = 1,4,7,10‐tetraazacyclododecane) with thiosulfate has been carried out by spectrophotometry in aqueous buffer at 30°C. Reaction between complex 1 and thiosulfate follows a first‐order rate saturation kinetics. The pH dependency and kinetic evidences suggest the participation of two complex species of Mn^III(μ‐O)₂Mn^IV under the experimental conditions. Detailed kinetic study shows that reduction of 2 proceeds through an autocatalytic path where the intermediate (Mn^III)₂ species has been assumed to catalyze the reaction. The difference in the reaction mechanisms is ascribed to the difference in stability of the intermediate complex species, the evidence for which comes from the electrochemical behavior of the complexes and time dependent EPR spectroscopic measurements during the reduction of 2 . © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 119–128, 2004     

Solvent effects on the rate of reaction of Cl2˙− and SO4˙− radicals with unsaturated alcohols

Rate constants have been measured in several aqueous/organic solvent mixtures for the addition reaction of Cl₂^˙? radicals with 2-propen-1-o1 and 2-buten-1-o1 as a function of temperature and with 2, 3-dimethyl-2-butene at room temperature. The rate constants were in the range of 10⁶–10⁹ L mol^?1 s^?1, the activation energies were relatively low (1–10 kJ mol^?1), and the pre-exponential factors varied over the range log A = 7.9 to 9.4. The rate constants (k) decreased (by up to a factor of 30) upon increasing the fraction of organic solvent and log k correlated linearly with the dielectric constant for a given water/organic solvent system, but the lines for the different solvent systems had different slopes. A better correlation of log k was found with a combination of the solvatochromic factor, E_T(30), and the hydrogen-bond donor acidity factor, α. This suggests that the rate of reaction is influenced by the solvent polarity and also by specific solvation of the ionic reactant and product. Solvent effect on the reaction of SO₄^˙? with 2-propen-1-o1 was studied for comparison. © 1993 John Wiley & Sons, Inc.     

Interaction between a di­methyl­amino group and an electron‐deficient alkene in ethyl (E)‐2‐cyano‐3‐(8‐di­methyl­amino­‐1‐naphthyl)­propenoate

The interaction between the peri substituents in the title compound, C₁₈H₁₈N₂O₂, measured at 150 K, represents an early stage in the addition reaction of an amino group to an electron‐deficient alkene, and has an N?Csp² separation of 2.531 (2) Å; comparison with related structures indicates that the nitrile group activates an alkene to nucleophilic attack more than a coplanar carboxyl­ic ester group.     

Factors Affecting DNA–DNA Interstrand Cross‐Links in the Antiparallel 3′–3′ Sense: A Comparison with the 5′–5′ Directional Isomer

Reported herein is a study of the unusual 3′–3′ 1,4‐GG interstrand cross‐link (IXL) formation in duplex DNA by a series of polynuclear platinum anticancer complexes. To examine the effect of possible preassociation through charge and hydrogen‐bonding effects the closely related compounds [{trans‐PtCl(NH₃)₂}₂(μ‐trans‐Pt(NH₃)₂{NH₂(CH₂)₆NH₂}₂)]⁴⁺ (BBR3464, 1 ), [{trans‐PtCl(NH₃)₂}₂(μ‐NH₂(CH₂)₆NH₂)]²⁺ (BBR3005, 2 ), [{trans‐PtCl(NH₃)₂}₂(μ‐H₂N(CH₂)₃NH₂(CH₂)₄)]³⁺ (BBR3571, 3 ) and [{trans‐PtCl(NH₃)₂}₂{μ‐H₂N(CH₂)₃‐N(COCF₃)(CH₂)₄}]²⁺ (BBR3571‐COCF₃, 4 ) were studied. Two different molecular biology approaches were used to investigate the effect of DNA template upon IXL formation in synthetic 20‐base‐pair duplexes. In the “hybridisation directed” method the monofunctionally adducted top strands were hybridised with their complementary 5′‐end labelled strands; after 24 h the efficiency of interstrand cross‐linking in the 5′–5′ direction was slightly higher than in the 3′–3′ direction. The second method involved “postsynthetic modification” of the intact duplex; significantly less cross‐linking was observed, but again a slight preference for the 5′–5′ duplex was present. 2D [¹H, ¹⁵N] HSQC NMR spectroscopy studies of the reaction of [¹⁵N]‐ 1 with the sequence 5′‐d{TATACATGTATA}₂ allowed direct comparison of the stepwise formation of the 3′–3′ IXL with the previously studied 5′–5′ IXL on the analogous sequence 5′‐d(ATATGTACATAT)₂. Whereas the preassociation and aquation steps were similar, differences were evident at the monofunctional binding step. The reaction did not yield a single distinct 3′–3′ 1,4‐GG IXL, but numerous cross‐linked adducts formed. Similar results were found for the reaction with the dinuclear [¹⁵N]‐ 2 . Molecular dynamics simulations for the 3′–3′ IXLs formed by both 1 and 2 showed a highly distorted structure with evident fraying of the end base pairs and considerable widening of the minor groove.     

Synthesis and Crystal Structure of Diaqua bis(4‐amino‐3‐methyl‐1, 2, 4‐triazol‐5‐thione)cadmium(II) Nitrate

The reaction of 4‐amino‐5‐methyl‐1, 2, 4‐triazol‐3(2H)‐thione (HAMTT, 1 ) with cadmium(II) acetate in ethanol leads to [Cd(η²‐AMTT)₂(H₂O)₂] ( 2 ); the reaction of 2 with nitric acid in ethanol produces the single‐crystals of [Cd(η²‐HAMTT)₂(H₂O)₂](NO₃)₂ ( 3 ). 2 and 3 have been characterized by IR, Raman, ¹H NMR spectroscopy and elemental analyses; furthermore, 3 has been determined by single‐crystal X‐ray diffraction studies. 3 crystallizes in the space group Pbcn, orthorhombic with the lattice dimensions at —80 °C; a = 1604.2(1), b = 895.6(1), c = 1266.5(3) pm, Z = 4, R₁= 0.0276, wR₂= 0.0722.     

Convenient Access to α‐Fluorinated Alkylammonium Salts

A series of novel α‐fluoroalkyl ammonium salts was obtained from the corresponding cyano compounds or nitriles by reaction with anhydrous HF. Room‐temperature stable trifluoromethyl ammonium salts were obtained in quantitative yield in a one‐step reaction at ambient temperature from the commercially available starting materials BrCN or ClCN. The novel cations [CF₃CF₂NH₃]⁺, [HCF₂CF₂NH₃]⁺, and [(NH₃CF₂)₂]²⁺ were obtained from CF₃CN, HCF₂CN, and (CN)₂, respectively, and anhydrous HF. The aforementioned fluorinated ammonium cations were isolated as room temperature stable [AsF₆]^? and/or [SbF₆]^? salts, and characterized by multi‐nuclear NMR and vibrational spectroscopy. The salts [HCF₂NH₃][AsF₆] and [CF₃NH₃][Sb₂F₁₁] were characterized by their X‐ray crystal structure.     

A comparative kinetic study for the oxidation of 2‐mercaptoethanol by di‐μ‐oxo‐bis(1,4,7,10‐tetraazacyclododecane)‐dimanganese(III,IV) and di‐μ‐oxo‐bis(1,4,8,11‐tetraazacyclotetradecane)‐dimanganese(III,IV) complexes: Influence of copper(II)

A comparative kinetic study of the reactions of two mixed valence manganese(III,IV) complexes with macrocyclic ligands, [L¹Mn^IV(O)₂Mn^IIIL¹], 1 (L¹ = 1,4,7,10‐tetraazacyclododecane) and [L²Mn^IV(O)₂Mn^IIIL²], 2 (L² = 1,4,8,11‐tetraazacyclotetradecane) with 2‐mercaptoethanol (RSH) has been carried out by spectrophotometry in aqueous buffer at (30 ± 0.1)°C. Rate of the reactions between the oxidants and the reductant was found to be negligibly slow with no systematic dependence on either redox partners. Externally added copper(II) (usually 5 × 10^?7 mol dm^?3), however, increases the rate of the reduction of 1 and 2 significantly. In the presence of catalytic amount of copper(II), the rate of the reaction is nearly proportional to [RSH] at lower concentration of the reductant but follows a saturation kinetics at higher concentration of the latter for the reaction between 1 and the thiol. Reaction rate was found to be strongly influenced by the variation of acidity of the medium and the observed kinetics suggests that the two reductant species ([Cu(RSH)]²⁺ and [Cu(RS)]⁺) are significant for the reaction between 1 and the thiol. The dependence of the rate on [RSH] for the reduction of 2 by the thiol was complex and rationalized considering two equilibria involving the catalyst (Cu²⁺) and the reductant. The pH rate profile suggests that both the μ‐O protonated [Mn^III(O)(OH)Mn^IV] and the deprotonated [Mn^III(O)₂Mn^IV] forms of the oxidant 2 become important. The kinetic results presented in this study indicate the domination of outer‐sphere path. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 129–137, 2004     

A New Chain Polymer via Thermolysis: [Hg(μ‐Br)2(3,5‐Br2py)]∞

The new ligand‐deficient chain polymer [Hg(μ‐Br)₂(3,5‐Br₂py)]_∞ has been obtained in form of single crystals by thermolysis of the ligand‐rich [Hg(μ‐Br)₂(3,5‐Br₂py)₂]_∞ at 180 °C at ambient pressure. From this reaction, high quality crystals of the product are directly accessible. The title compound features Hg^II cations in a distorted square‐pyramidal coordination; their metal centers aggregate via edge‐sharing with asymmetric halide bridges to chains in which all apical N donor ligands are oriented to the same side of the [Hg(μ‐Br)₂]_∞ backbone. The new polymer cannot be prepared by stoichiometric reaction in solution.     

Poly[aqua[μ4‐3,3′‐(diazenediyl)dibenzoato]zinc]

The solvothermal reaction of Zn(OAc)₂·2H₂O with 3,3′‐(diazenediyl)dibenzoic acid (H₂ADB) in H₂O at 393 K afforded the title complex, [Zn(C₁₄H₈N₂O₄)(H₂O)]_n. The asymmetric unit contains half a Zn^II cation, half an ADB ligand and half a water molecule. Each Zn^II centre lies on a crystallographic twofold rotation axis and is five‐coordinated by four O atoms of bridging carboxylate groups from four ADB ligands and one O atom from a water molecule, forming a distorted trigonal–bipyramidal coordination geometry. The [Zn(H₂O)] subunits are bridged by carboxylate groups to give one‐dimensional [Zn(μ‐COO)₄(H₂O)]_n chains. The chains are linked by ADB ligands into two‐dimensional sheets, and these sheets are further connected to neighbouring sheets via hydrogen bonds (OW—HW...O), forming a three‐dimensional hydrogen‐bond‐stabilized structure with an unprecedented 3⁷4¹⁷5²6² topology.     

Koordinativ ungesättigte Dirutheniumkomplexe: Synthese und Kristallstrukturen von [Ru2(CO)4(μ‐H)(μ‐S)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] und [Ru2(CO)4(μ‐X)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] (X = Cl,S2CH)

Coordinatively Unsaturated Diruthenium Complexes: Synthesis and X‐Ray Crystal Structures of [Ru₂(CO)₄(μ‐H)(μ‐S)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)], [Ru₂(CO)₄(μ‐X)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] (X = Cl, S₂CH) [Ru₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 1 ) reacts in benzene with elemental sulfur to the addition product [Ru₂(CO)₄(μ‐H)(μ‐S)(μ‐P^tBu₂)(μ‐dppm)] ( 2 ) (dppm = Ph₂PCH₂PPh₂). 2 is also obtained by reaction of 1 with ethylene sulfide. The reaction of 1 with carbon disulfide yields with insertion of the CS₂ into the Ru₂(μ‐H) bridge the dithioformato complex [Ru₂(CO)₄(μ‐S₂CH)(μ‐P^tBu₂)(μ‐dppm)] ( 3 ). Furthermore, 1 reacts with [NO][BF₄] to the complex salt [Ru₂(CO)₄(μ‐NO)(μ‐H)(μ‐P^tBu₂)(μ‐dppm)][BF₄] ( 4 ), and reaction of 1 with CCl₄ or CHCl₃ affords spontaneously [Ru₂(CO)₄(μ‐Cl)(μ‐P^tBu₂)(μ‐dppm)] ( 5 ) in nearly quantitative yield. The molecular structures of 2 , 3 and 5 were confirmed by crystal structure analyses.     

Reaktionen von 1,1,3,3‐Tetrakis(dimethylamino)‐1 λ5, 3 λ5‐diphosphet mit 5‐Cyano‐1‐pentin und mit 2‐(Cyanmethyl)‐1‐methylpyrrol

Diphosphabenzenes. VII. Reactions of 1,1,3,3‐Tetrakis(dimethylamino)‐1 λ⁵, 3 λ⁵‐diphosphete with 5‐Cyano‐1‐pentine and 2‐(Cyanomethyl)‐1‐methylpyrrol 5‐Cyano‐1‐pentine reacts with the equimolar amount of the λ⁵‐diphosphete 1 to give the λ⁵‐diphosphinine (λ⁵‐diphosphabenzene) ( 3 ), while reaction with the double equimolar amount of 1 yields the λ⁵‐diphosphinine ( 4 ). The acyclic compount 6 is the main product of the reaction between 1 and 2‐(cyanomethyl)‐1‐methylpyrrol, 5 . Melting points of 4 · CH₃CN and 6 , and mass, nmr and ir spectra of 3 , 4 , and 6 are reported. The crystal structure of 4 · CH₃CN shows an open‐chain ylidic CPCP‐sequence, which is linked to a λ⁵‐diphosphinine via an ethylene bridge. The X‐ray structure analysis of 6 confirms the existence as an acyclic conjugated double ylid.     

Copper(II) and Sodium(I) Complexes based on 3,7‐Diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane‐5‐oxide: Synthesis,Characterization, and Catalytic Activity

The reaction of 3,7‐diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane (DAPTA) with metal salts of Cu^II or Na^I/Ni^II under mild conditions led to the oxidized phosphane derivative 3,7‐diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane‐5‐oxide (DAPTA=O) and to the first examples of metal complexes based on the DAPTA=O ligand, that is, [Cu^II(μ‐CH₃COO)₂(κO‐DAPTA=O)]₂ ( 1 ) and [Na(1κOO′;2κO‐DAPTA=O)(MeOH)]₂(BPh₄)₂ ( 2 ). The catalytic activity of 1 was tested in the Henry reaction and for the aerobic 2,2,6,6‐tetramethylpiperidin‐1‐oxyl (TEMPO)‐mediated oxidation of benzyl alcohol. Compound 1 was also evaluated as a model system for the catechol oxidase enzyme by using 3,5‐di‐tert‐butylcatechol as the substrate. The kinetic data fitted the Michaelis–Menten equation and enabled the obtainment of a rate constant for the catalytic reaction; this rate constant is among the highest obtained for this substrate with the use of dinuclear Cu^II complexes. DFT calculations discarded a bridging mode binding type of the substrate and suggested a mixed‐valence Cu^II/Cu^I complex intermediate, in which the spin electron density is mostly concentrated at one of the Cu atoms and at the organic ligand.     

4,5‐Di­hydro‐3‐methyl‐5‐(4‐methyl­phenyl)‐1H‐pyrazole‐1‐carbox­amide

The reaction between 4‐(4‐methyl­phenyl)­but‐3‐en‐2‐one and amino­guanidine produced an unexpected product of formula C₁₂H₁₅N₃O, consisting of a carbox­amide moiety joined to a substituted pyrazoline ring at one of the N atoms. The pyrazoline ring adopts a flat‐envelope conformation and the substituted phenyl ring is oriented almost perpendicular to the heterocycle. The carbonyl O atom has partial anionic character as a result of the transfer of π density from the two adjacent sp² N atoms and is involved in an intermolecular hydrogen bond with the amide group.