One‐Pot Synthesis of Carbon‐Coated Nanostructured Iron Oxide on Few‐Layer Graphene for Lithium‐Ion Batteries

Nanostructure engineering has been demonstrated to improve the electrochemical performance of iron oxide based electrodes in Li‐ion batteries (LIBs). However, the synthesis of advanced functional materials often requires multiple steps. Herein, we present a facile one‐pot synthesis of carbon‐coated nanostructured iron oxide on few‐layer graphene through high‐pressure pyrolysis of ferrocene in the presence of pristine graphene. The ferrocene precursor supplies both iron and carbon to form the carbon‐coated iron oxide, while the graphene acts as a high‐surface‐area anchor to achieve small metal oxide nanoparticles. When evaluated as a negative‐electrode material for LIBs, our composite showed improved electrochemical performance compared to commercial iron oxide nanopowders, especially at fast charge/discharge rates.     

Carbon‐Coated Hierarchical SnO2 Hollow Spheres for Lithium Ion Batteries

Hierarchical SnO₂ hollow spheres self‐assembled from nanosheets were prepared with and without carbon coating. The combination of nanosized architecture, hollow structure, and a conductive carbon layer endows the SnO₂‐based anode with improved specific capacity and cycling stability, making it more promising for use in lithium ion batteries.     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.     

One‐Step Synthesis of SnO2 and TiO2 Hollow Nanostructures with Various Shapes and Their Enhanced Lithium Storage Properties

A versatile one‐step method for the general synthesis of metal oxide hollow nanostructures is demonstrated. This method involves the controlled deposition of metal oxides on shaped α‐Fe₂O₃ crystals which are simultaneously dissolved. A variety of uniform SnO₂ hollow nanostructures, such as nanococoons, nanoboxes, hollow nanorings, and nanospheres, can be readily generated. The method is also applicable to the synthesis of shaped TiO₂ hollow nanostructures. As a demonstration of the potential applications of these hollow nanostructures, the lithium storage capability of SnO₂ hollow structures is investigated. The results show that such derived SnO₂ hollow structures exhibit stable capacity retention of 600–700 mAh g^?1 for 50 cycles at a 0.2 C rate and good rate capability at 0.5–1 C, perhaps benefiting from the unique structural characteristics.     

Facile Mechanochemical Synthesis of Nano SnO2/Graphene Composite from Coarse Metallic Sn and Graphite Oxide: An Outstanding Anode Material for Lithium‐Ion Batteries

A facile method for the large‐scale synthesis of SnO₂ nanocrystal/graphene composites by using coarse metallic Sn particles and cheap graphite oxide (GO) as raw materials is demonstrated. This method uses simple ball milling to realize a mechanochemical reaction between Sn particles and GO. After the reaction, the initial coarse Sn particles with sizes of 3–30 μm are converted to SnO₂ nanocrystals (approximately 4 nm) while GO is reduced to graphene. Composite with different grinding times (1 h 20 min, 2 h 20 min or 8 h 20 min, abbreviated to 1, 2 or 8 h below) and raw material ratios (Sn:GO, 1:2, 1:1, 2:1, w/w) are investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy and transmission electron microscopy. The as‐prepared SnO₂/graphene composite with a grinding time of 8 h and raw material ratio of 1:1 forms micrometer‐sized architected chips composed of composite sheets, and demonstrates a high tap density of 1.53 g cm^?3. By using such composites as anode material for LIBs, a high specific capacity of 891 mA h g^?1 is achieved even after 50 cycles at 100 mA g^?1.     

Ultrathin MoS2 Nanosheets Supported on N‐doped Carbon Nanoboxes with Enhanced Lithium Storage and Electrocatalytic Properties

Molybdenum disulfide (MoS₂) has received considerable interest for electrochemical energy storage and conversion. In this work, we have designed and synthesized a unique hybrid hollow structure by growing ultrathin MoS₂ nanosheets on N‐doped carbon shells (denoted as C@MoS₂ nanoboxes). The N‐doped carbon shells can greatly improve the conductivity of the hybrid structure and effectively prevent the aggregation of MoS₂ nanosheets. The ultrathin MoS₂ nanosheets could provide more active sites for electrochemical reactions. When evaluated as an anode material for lithium‐ion batteries, these C@MoS₂ nanoboxes show high specific capacity of around 1000 mAh g^?1, excellent cycling stability up to 200 cycles, and superior rate performance. Moreover, they also show enhanced electrocatalytic activity for the electrochemical hydrogen evolution.     

Wintersweet‐Flower‐Like CoFe2O4/MWCNTs Hybrid Material for High‐Capacity Reversible Lithium Storage

CoFe₂O₄/multiwalled carbon nanotubes (MWCNTs) hybrid materials were synthesized by a hydrothermal method. Field emission scanning electron microscopy and transmission electron microscopy analysis confirmed the morphology of the as‐prepared hybrid material resembling wintersweet flower “buds on branches”, in which CoFe₂O₄ nanoclusters, consisting of nanocrystals with a size of 5–10 nm, are anchored along carbon nanotubes. When applied as an anode material in lithium ion batteries, the CoFe₂O₄/MWCNTs hybrid material exhibited a high performance for reversible lithium storage. In particular, the hybrid anode material delivered reversible lithium storage capacities of 809, 765, 539, and 359 mA h g^?1 at current densities of 180, 450, 900, and 1800 mA g^?1, respectively. The superior performance of CoFe₂O₄/MWCNTs hybrid materials could be ascribed to the synergistic pinning effect of the wintersweet‐flower‐like nanoarchitecture. This strategy could also be applied to synthesize other metal oxide/CNTs hybrid materials as high‐capacity anode materials for lithium ion batteries.     

Monodisperse Sandwich‐Like Coupled Quasi‐Graphene Sheets Encapsulating Ni2P Nanoparticles for Enhanced Lithium‐Ion Batteries

In this report, sandwiched Ni₂P nanoparticles encapsulated by graphene sheets are first synthesized by directly encapsulating functional units in graphene sheets instead of fabricating separate graphene sheets and then immobilizing the functional components onto the generated surfaces. In this strategy, we use low‐cost, sustainable and environmentally friendly glucose as a carbon source and NiNH₄PO₄ ? H₂O nanosheets as sacrificial templates. This unique structure obtained here cannot only prevent the nanoparticles from aggregation or loss but also enhance the electronic conductivity compared to the independent nanoparticles. Furthermore, the novel sandwich‐like Ni₂P/C can be applied in plenty of fields, especially in electrical energy storage. In this paper, a series of electrochemical tests of the sandwich‐like Ni₂P/C are carried out, which demonstrate the excellent cyclic stability and rate capacity for lithium‐ion batteries.     

Coordination‐Driven Hierarchical Assembly of Silver Nanoparticles on MoS2 Nanosheets for Improved Lithium Storage

We report a novel strategy for the hierarchical assembly of Ag nanoparticles (NPs) on MoS₂ nanosheets through coordination by using a multifunctional organic ligand. The presence of Ag NPs on the surface of MoS₂ nanosheets inhibits their agglomeration, thereby providing increased interlayer spacing for easy Li⁺ ion intercalation. Such a unique hybrid architecture also ensures sufficient percolation pathways on the whole surface of the MoS₂ nanosheets. Moreover, the high rigidity and low deformability of the Ag NPs effectively preserve the hybrid architecture during the charge–discharge process, which translates into a high cycle stability. A prominent synergistic effect between MoS₂ and Ag is witnessed. When the Ag content is only 5 wt %, the Ag–MoS₂ hybrid delivers a reversible capacity as high as 920 mA h g^?1 at a current density of 100 mA g^?1, making the Ag–MoS₂ hybrid an attractive candidate for next‐generation LIBs.     

Synergistic Effect of SnO2/ZnWO4 Core–Shell Nanorods with High Reversible Lithium Storage Capacity

High reversible lithium storage capacity is obtained from novel SnO₂/ZnWO₄ core–shell nanorods. At C/20 (20 h per half cycle) rate, the reversible capacity of SnO₂/ZnWO₄ core–shell nanorods is as high as 1000 mAh g^?1, much higher than that of pure ZnWO₄, SnO₂, or the traditional theoretical result of the simple mixture. Such performance can be attributed to the synergistic effect between the nanostructured SnO₂ and ZnWO₄. The distinct electrochemical activity of ZnWO₄ nanorods probably activates the irreversible capacity of the SnO₂ nanoparticles. These results indicate that high‐performance lithium ion batteries can be realized by introducing the synergistic effect of one‐dimensional core–shell nanocomposites.     

Carbon Nanofibers Decorated with Molybdenum Disulfide Nanosheets: Synergistic Lithium Storage and Enhanced Electrochemical Performance

Traditional lithium‐ion batteries that are based on layered Li intercalation electrode materials are limited by the intrinsically low theoretical capacities of both electrodes and cannot meet the increasing demand for energy. A facile route for the synthesis of a new type of composite nanofibers, namely carbon nanofibers decorated with molybdenum disulfide sheets (CNFs@MoS₂), is now reported. A synergistic effect was observed for the two‐component anode, triggering new electrochemical processes for lithium storage, with a persistent oxidation from Mo (or MoS₂) to MoS₃ in the repeated charge processes, leading to an ascending capacity upon cycling. The composite exhibits unprecedented electrochemical behavior with high specific capacity, good cycling stability, and superior high‐rate capability, suggesting its potential application in high‐energy lithium‐ion batteries.     

Combining Nitrogen‐Doped Graphene Sheets and MoS2: A Unique Film–Foam–Film Structure for Enhanced Lithium Storage

With a notable advantage in terms of capacity, molybdenum disulfide has been considered a promising anode material for building high‐energy‐density lithium‐ion batteries. However, its intrinsically low electronic conductivity and unstable electrochemistry lead to poor cycling stability and inferior rate performance. We herein describe the scalable assembly of free‐standing MoS₂–graphene composite films consisting of nitrogen‐doped graphene and ultrathin honeycomb‐like MoS₂ nanosheets. The composite has a unique film–foam–film hierarchical top‐down architecture from the macroscopic to the microscopic and the nanoscopic scale, which helps rendering the composite material highly compact and leads to rapid ionic/electronic access to the active material, while also accommodating the volume variation of the sulfide upon intercalation/deintercalation of Li. The unique structural merits of the composite lead to enhanced lithium storage.     

Template‐Free Synthesis of Hierarchical Vanadium‐Glycolate Hollow Microspheres and Their Conversion to V2O5 with Improved Lithium Storage Capability

Nanosheet‐assembled hierarchical V₂O₅ hollow microspheres are successfully obtained from V‐glycolate precursor hollow microspheres, which in turn are synthesized by a simple template‐free solvothermal method. The structural evolution of the V‐glycolate hollow microspheres has been studied and explained by the inside‐out Ostwald‐ripening mechanism. The surface morphologies of the hollow microspheres can be controlled by varying the mixture solution and the solvothermal reaction time. After calcination in air, hierarchical V₂O₅ hollow microspheres with a high surface area of 70 m² g^?1 can be obtained and the structure is well preserved. When evaluated as cathode materials for lithium‐ion batteries, the as‐prepared hierarchical V₂O₅ hollow spheres deliver a specific discharge capacity of 144 mA h g^?1 at a current density of 100 mA g^?1, which is very close to the theoretical capacity (147 mA h g^?1) for one Li⁺ insertion per V₂O₅. In addition, excellent rate capability and cycling stability are observed, suggesting their promising use in lithium‐ion batteries.     

Direct Solvothermal Synthesis of B/N‐Doped Graphene

Heteroatom‐doping into graphitic networks has been utilized for opening the band gap of graphene. However, boron‐doping into the graphitic framework is extremely limited, whereas nitrogen‐doping is relatively feasible. Herein, boron/nitrogen co‐doped graphene (BCN‐graphene) is directly synthesized from the reaction of CCl₄, BBr₃, and N₂ in the presence of potassium. The resultant BCN‐graphene has boron and nitrogen contents of 2.38 and 2.66 atom %, respectively, and displays good dispersion stability in N‐methyl‐2‐pyrrolidone, allowing for solution casting fabrication of a field‐effect transistor. The device displays an on/off ratio of 10.7 with an optical band gap of 3.3 eV. Considering the scalability of the production method and the benefits of solution processability, BCN‐graphene has high potential for many practical applications.     

Germanium Quantum Dots Embedded in N‐Doping Graphene Matrix with Sponge‐Like Architecture for Enhanced Performance in Lithium‐Ion Batteries

Germanium quantum dots embedded in a nitrogen‐doped graphene matrix with a sponge‐like architecture (Ge/GN sponge) are prepared through a simple and scalable synthetic method, involving freeze drying to obtain the Ge(OH)₄/graphene oxide (GO) precursor and subsequent heat reduction treatment. Upon application as an anode for the lithium‐ion battery (LIB), the Ge/GN sponge exhibits a high discharge capacity compared with previously reported N‐doped graphene. The electrode with the as‐synthesized Ge/GN sponge can deliver a capacity of 1258 mAh g^?1 even after 50 charge/discharge cycles. This improved electrochemical performance can be attributed to the pore memory effect and highly conductive N‐doping GN matrix from the unique sponge‐like structure.     

Fabrication of Fe‐Doped LiCoO2 Sandwich‐Like Nanocomposites as Excellent Performance Cathode Materials for Lithium‐Ion Batteries

In this article, the two‐layer sandwiched graphene@LiFe_0.2Co_0.8O₂ nanoparticles (SG@LFCO) have been prepared and investigated as high‐rate and long‐life cathode materials for rechargeable lithium‐ion batteries. The materials possess a high‐surface area (267.1 m² g^?1) and lots of void spaces. By combining various favorable conditions, such as Fe doping, coating graphene, and designing novel morphology, the as‐prepared materials deliver a specific capacity of 115 mAh g^?1 at 10 C. At the 0.1 C cycling rate, the capacity retention of 97.2 % is sustained after 250 cycles and a coulombic efficiency of around 97.6 % is obtained.