Broadband Cr3+, Sn4+‐Doped Oxide Nanophosphors for Infrared Mini Light‐Emitting Diodes

Light‐emitting diodes break barriers of size and performance for displays. With devices becoming smaller, the materials also need to get smaller. Chromium(III)‐doped oxide phosphors, which emit near‐infrared (NIR) light, have recently been used in small electronic devices. In this work, mesoporous silica nanoparticles were used as nanocarriers. The nanophosphor ZnGa₂O₄:Cr³⁺,Sn⁴⁺ formed in the mesopore after sintering. Good dispersity and morphology were performed with average diameters of 71±7 nm. It emitted light at 600–850 nm; the intensity was optimized by tuning the doping ratio of Cr³⁺ and Sn⁴⁺. Meanwhile, the light conversion efficiency increased from 7.8 % to 37 % and the molar concentration increased from 0.125 m to 0.5 m . The higher radiant flux of 3.3 mW was obtained by operating an input current of 45 mA. However, the NIR nanophosphor showed good performance on mini light‐emitting diode chips.     

ZnGa2O4 Nanorod Arrays Decorated with Ag Nanoparticles as Surface‐Enhanced Raman‐Scattering Substrates for Melamine Detection

The availability of sensitive, reproducible, and stable substrates is critically important for surface‐enhanced Raman spectroscopy (SERS)‐based applications, but it presently remains a challenge. In this work, well‐aligned zinc gallate (ZnGa₂O₄) nanorod arrays grown on a Si substrate by chemical vapor deposition were used as templates to fabricate SERS substrates by deposition of Ag nanoparticles onto the ZnGa₂O₄ nanorod surfaces. The coverage of the Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces was easily controlled by varying the amount of AgNO₃. SERS measurements showed that the number density of Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces had a great effect on SERS activity. The SERS signals collected by point‐to‐point and SERS mapping images showed that as‐prepared SERS substrates exhibited good spatial uniformity and reproducibility. Detection of melamine molecules at low concentrations (1.0×10^?7 M ) was used as an example to show the possible application of such a substrate. In addition, the effect of benzoic acid on the detection of melamine was also investigated. It was found that the SERS signal intensity of melamine decreased greatly as the concentration of benzoic acid was increased.     

Influence of annealing temperature on material properties of red emitting ZnGa<Subscript>2</Subscript>O<Subscript>4</Subscript>: Cr<Superscript>3+</Superscript> nanostructures

Zinc gallate (ZnGa₂O₄) nanopowders doped with Cr³⁺ (1?mo%) were synthesized by the citric acid assisted sol–gel method. The influence of annealing temperature, structural, morphological, and optical properties of ZnGa₂O₄: Cr³⁺ (1?mol%) nanosized particles were investigated. The X-ray diffraction (XRD) spectra indicated that the nanoparticles are cubic in structure and the annealing temperature did not influence any c in structure. The average crystallite size of ZnGa₂O₄: Cr³⁺ nanoparticles were observed to increase from 11.85 to 30.88?nm as the annealing temperature increased from 600 to 1000?°C. The scanning electron microscopy (SEM) showed nearly spherical nanostructures that change in size with annealing temperature. The high resolution transmission electron microscope (HR-TEM) images show well resolved lattice fringes which is an indications of highly crystalline samples. Ultraviolet–visible (UV–Vis) measurement show decrease in reflectance in visible region and energy band gap was found to decrease with annealing temperature. The photoluminescence (PL) intensity was found to be maximum for sample annealed at high temperature (1000?°C) and least with sample annealed at low temperature (600?°C). An increase in annealing temperature leads significantly increment in PL intensity. The degree of crystallinity also increased with annealing temperature from XRD, SEM, and HR-TEM analysis. The photoluminescence lifetimes, particle size, and emission spectra are comparable with reports on bioimaging applications.

Open image in new window

     

Poly[nickel(II)‐di‐μ‐4,4′‐bipyridyl‐κ4N:N′‐μ‐dichromato‐κ2O:O′] and poly[copper(II)‐di‐μ‐4,4'‐bipyridyl‐κ4N:N′‐μ‐dichromato‐κ2O:O′]

The novel title hybrid isomorphous organic–inorganic mixed‐metal dichromates, [Ni(Cr₂O₇)(C₁₀H₈N₂)₂] and [Cu(Cr₂O₇)(C₁₀H₈N₂)₂], have been synthesized. A non‐centrosymmetric three‐dimensional (4,6)‐net is formed from a linear chain of vertex‐linked [Cr₂O]²⁻ and [MN₄O]²⁺ (M = Ni and Cu) units, which in turn are linked by the planar bidentate 4,4′‐­bipyridine ligand through the four remaining vertices of the [MN₄O]²⁺ octahedra. There are two such three‐dimensional nets that interpenetrate with inversion symmetry.     

Carboxymethylated polyethylenimine modified magnetic nanoparticles specifically for purification of His‐tagged protein

Employing immobilized metal‐ion affinity chromatography and magnetic separation could ideally provide a useful analytical strategy for purifying His‐tagged protein. In the current study, a facile route was designed to prepare CMPEI‐Ni²⁺@SiO₂@Fe₃O₄ (CMPEI=carboxymethylated polyethyleneimine) magnetic nanoparticles composed of a strong magnetic core of Fe₃O₄ and a Ni²⁺‐immobilized carboxymethylated polyethyleneimine coated outside shell, which was formed by electrostatic interactions between polyanionic electrolyte of carboxymethylated polyethyleneimine and positively charged surface of 3‐(trimethoxysilyl)propylamin modified SiO₂@Fe₃O₄. The resulting CMPEI‐Ni²⁺@SiO₂@Fe₃O₄ composite nanoparticles displayed well‐uniform structure and high magnetic responsiveness. Hexa His‐tagged peptides and purified His‐tagged recombinant retinoid X receptor alpha were chosen as the model samples to evaluate the adsorption, capacity, and reusability of the composite nanoparticles. The results demonstrated the CMPEI‐Ni²⁺@SiO₂@Fe₃O₄ nanoparticles possessed rapid adsorption, large capacity, and good recyclability. The obtained nanoparticles were further used to purify His‐tagged protein in practical environment. It was found that the nanoparticles could selectively capture His‐tagged recombinant retinoid X receptor protein from complex cell lysate. Owing to its easy synthesis, large binding capacity, and good reusability, the prepared CMPEI‐Ni²⁺@SiO₂@Fe₃O₄ magnetic nanoparticles have great potential for application in biotechnological fields.     

Synthesis and Characterization of Nanostructured Fe3O4 Micron‐Spheres and Their Application in Removing Toxic Cr Ions from Polluted Water

We present a simple and effective method for the synthesis of nanostructured Fe₃O₄ micron‐spheres (NFMSs) by annealing hydrothermally formed FeCO₃ spheres in argon. The phase structure, particle size, and magnetic properties of the product have been characterized by X‐ray diffraction (XRD), Fourier‐transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and by means of a superconducting quantum interference device (SQUID). The results have shown that the as‐obtained NFMSs have a diameter of about 5 μm and are composed of nanometer‐sized porous lamellae. The NFMSs have a large specific surface area (135.9 m² g^?1), reductive Fe²⁺ incorporated into their structure, and intense magnetic properties. These properties suggest that NFMSs have potential application in removing toxic Cr⁶⁺ ions from polluted water. At 25 °C, each gram of NFMSs product can remove 43.48 mg of Cr⁶⁺ ions, as compared to just 10.2 mg for nanometer‐sized Fe₃O₄ and 1.89 mg for micron‐sized Fe₃O₄. The enhanced removal performance can be ascribed to the structural features. Moreover, the Cr⁶⁺ ion removal capacity of the NFMSs can reach up to 71.2 mg g^?1 at 50 °C. The influencing parameters in the removal of Cr⁶⁺ ions, such as contact time, pH, and temperature, have been evaluated. The Cr⁶⁺‐removal mechanism has been investigated. We have found that the NFMSs product not only serves as an effective adsorbent to remove toxic Cr⁶⁺ ions from polluted water, but also as an effective reductant in reducing the adsorbed toxic Cr⁶⁺ ions to much less toxic Cr³⁺ through the Fe²⁺ incorporated into its structure.     

A novel spinel coating on cobalt‐based Superalloy GH605 via an in‐situ oxidation approach

Cr‐Mn‐O spinel coating was prepared on the surface of cobalt‐based superalloy GH605 via an in‐situ oxidation method in H₂O‐H₂ environment. The composition, morphology, and chemical value state of the oxide spinel coatings were investigated by SEM, EDS, XRD, Raman spectra, and XPS. It indicated that the morphology of coating varied with oxidation temperature, and granular surface appeared when oxidation temperature increased to 1100°C. The formed Cr‐Mn‐O spinel coating was composed of Cr₂O₃ and MnCr₂O₄, and the thickness increased significantly with oxidation temperature. In the coating, Cr element existed in the state of Cr³⁺ ions and Cr⁶⁺ ions, while Mn element only existed in the form of Mn²⁺ ions.     

Cr3+:SrGa12O19: A Broadband Near‐Infrared Long‐Persistent Phosphor

Cr³⁺‐doped SrGa₁₂O₁₉ is demonstrated to be a broadband near‐infrared (650–950 nm) long‐persistent phosphor whose luminescence can last for more than 2 h after ultraviolet irradiation is stopped. Detailed analysis of the photoluminescence and thermoluminescence spectra and of the persistent decay behavior of the Cr³⁺‐doped SrGa₁₂O₁₉ samples indicate that the persistent energy transfer from the SrGa₁₂O₁₉ host to the Cr³⁺ ions and the filling and release of electrons into and from the shallow and deep traps through the conduction band is responsible for the long‐persistent phosphorescence.     

Mixed‐Metal MIL‐100(Sc,M) (M=Al,Cr, Fe) for Lewis Acid Catalysis and Tandem CC Bond Formation and Alcohol Oxidation

The trivalent metal cations Al³⁺, Cr³⁺, and Fe³⁺ were each introduced, together with Sc³⁺, into MIL‐100(Sc,M) solid solutions (M=Al, Cr, Fe) by direct synthesis. The substitution has been confirmed by powder X‐ray diffraction (PXRD) and solid‐state NMR, UV/Vis, and X‐ray absorption (XAS) spectroscopy. Mixed Sc/Fe MIL‐100 samples were prepared in which part of the Fe is present as α‐Fe₂O₃ nanoparticles within the mesoporous cages of the MOF, as shown by XAS, TGA, and PXRD. The catalytic activity of the mixed‐metal catalysts in Lewis acid catalysed Friedel–Crafts additions increases with the amount of Sc present, with the attenuating effect of the second metal decreasing in the order Al>Fe>Cr. Mixed‐metal Sc,Fe materials give acceptable activity: 40 % Fe incorporation only results in a 20 % decrease in activity over the same reaction time and pure product can still be obtained and filtered off after extended reaction times. Supported α‐Fe₂O₃ nanoparticles were also active Lewis acid species, although less active than Sc³⁺ in trimer sites. The incorporation of Fe³⁺ into MIL‐100(Sc) imparts activity for oxidation catalysis and tandem catalytic processes (Lewis acid+oxidation) that make use of both catalytically active framework Sc³⁺ and Fe³⁺. A procedure for using these mixed‐metal heterogeneous catalysts has been developed for making ketones from (hetero)aromatics and a hemiacetal.     

High‐temperature mass spectrometric study of the vaporization processes in the system CaO‐MgO‐Al2O3‐Cr2O3‐FeO‐SiO2

Knudsen effusion mass spectrometry was used to study vaporization processes and thermodynamic properties of twenty samples of chromium‐containing slags in the CaO‐MgO‐Al₂O₃‐Cr₂O₃‐FeO‐SiO₂ system in the temperature range 1850–2750 K. Tungsten cells were used and Cr₂O₃ solid was used as a reference material. The system was calibrated using liquid gold. As FeO was the first emanating vapor species, monitoring of the chromium‐containing species could be carried out only after the complete vaporization of FeO. This, however, was found to have very little impact on the concentration of the slags investigated. During the measurements, the ion current intensities of CrO⁺ and CrO species in the mass spectra of the vapor over the CaO‐MgO‐Al₂O₃‐Cr₂O₃‐FeO‐SiO₂ samples were monitored and compared with those corresponding to solid Cr₂O₃. Data on the partial pressures of vapor species as well as the activities of Cr₂O₃ as a function of temperature were obtained. The results are expected to be valuable in the optimization of slag composition in high alloy steelmaking processes. Copyright © 2009 John Wiley & Sons, Ltd.     

Ceria–Zirconia Nanoparticles as an Enhanced Multi‐Antioxidant for Sepsis Treatment

The two oxidation states of ceria nanoparticles, Ce³⁺ and Ce⁴⁺, play a pivotal role in scavenging reactive oxygen species (ROS). In particular, Ce³⁺ is largely responsible for removing O₂⁻ and ^.OH that are associated with inflammatory response and cell death. The synthesis is reported of 2 nm ceria–zirconia nanoparticles (CZ NPs) that possess a higher Ce³⁺/Ce⁴⁺ ratio and faster conversion from Ce⁴⁺ to Ce³⁺ than those exhibited by ceria nanoparticles. The obtained Ce_0.7Zr_0.3O₂ (7CZ) NPs greatly improve ROS scavenging performance, thus regulating inflammatory cells in a very low dose. Moreover, 7CZ NPs are demonstrated to be effective in reducing mortality and systemic inflammation in two representative sepsis models. These findings suggest that 7CZ NPs have the potential as a therapeutic nanomedicine for treating ROS‐related inflammatory diseases.     

Tris[3‐hydroxy‐2(1 H)‐pyridinonato]‐Komplexe von Al3+, Cr3+ und Fe3+ – Kristall‐ und Molekülstrukturen von 3‐Hydroxy‐2(1 H)‐pyridinon und Tris[3‐hydroxy‐2(1 H)‐pyridinonato]chrom(III)

Tris[3‐hydroxy‐2(1 H)‐pyridinonato] Complexes of Al³⁺, Cr³⁺, and Fe³⁺ – Crystal and Molecular Structures of 3‐Hydroxy‐2(1 H)‐pyridinone and Tris[3‐hydroxy‐2(1 H)‐pyridinonato]chromium(III) Tris[3‐hydroxy‐2(1 H)‐pyridinonato] complexes of Al³⁺, Cr³⁺ and Fe³⁺ are obtained by reactions of 3‐hydroxy‐2(1 H)pyridinone with the hydrates of AlCl₃, CrCl₃ or Fe(NO₃) in aqueous alkaline solutions as polycrystalline precipitates. The compounds are isotypic. X‐ray structure determinations were performed on single crystals of the uncoordinated 3‐hydroxy‐2(1 H)‐pyridinone ( 1 ) (orthorhombic, space group P2₁2₁2₁, a = 405.4(1), b = 683.0(1), c = 1770.3(3) pm, Z = 4) and of the chromium compound 3 (rhombohedral with hexagonal setting, space group R3c, a = 978.1(1), c = 2954.0(1) pm, Z = 6).     

Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate

In this study, Ag, Ni²⁺, and Fe²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ nanoparticles (γ‐Fe₂O₃@HAp‐Ag, γ‐Fe₂O₃@HAp‐Ni²⁺, and γ‐Fe₂O₃@HAp‐Fe²⁺) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation.     

Synthesis and Infrared Multi‐band Absorption Properties of Core‐shell NaYF4:Yb3+, Er3+@SiO2 Nanoparticles

Due to the unique size effects, nanomaterials in infrared absorption have attracted much attention for their strong absorption in the infrared region. To achieve the infrared multi‐band absorption, we propose to synthesize a core‐shell structure nanomaterial consisting of NaYF₄:Yb³⁺, Er³⁺ core and a layer of SiO₂ as shell. A series of NaYF₄:Yb³⁺, Er³⁺ nanocrystals were synthesized through hydrothermal method by adjusting the ratio of citric acid(CA)‐to‐NaOH, and the effects of CA concentration, and NaOH concentration were studied in detail. NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were synthesized by sol‐gel method using TEOS as silica source. The results show that the core‐shell NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were successfully synthesized. Up‐conversion spectra of these nanoparticles were recorded with 980 nm laser excitation under room temperature. There are no changes of the emission centers of nanoparticles before or after silica coating, but the emission intensities of nanoparticles after silica coating are weakened. Furthermore, the property of infrared multi‐band absorption was tested through ultraviolet‐visible‐near infrared spectrophotometer and infrared absorption spectra. The results illustrate that the multi‐band infrared absorption nanomaterial was successfully synthesized.     

The effects of ZnGa2O4 formation on structural and optical properties of ZnO:Ga powders

Gallium-doped zinc oxide (ZnO:Ga 1, 2, 3, 4 and 5 at%) samples were prepared in powder form by modifying the Pechini method. The formation of zinc gallate (ZnGa₂O₄) with the spinel crystal structure was observed even in ZnO:Ga 1 at% by X-ray diffraction. The presence of ZnGa₂O₄ in ZnO:Ga samples was also evidenced by luminescence spectroscopy through its blue emission at 430 nm, assigned to charge transfer between Ga³⁺ at regular octahedral symmetry and its surrounding O²⁻ ions. The amount of ZnGa₂O₄ increases as the dopant concentration increases, as observed by the quantitative phase analysis by the Rietveld method.     

Ca10(CrVO4)6(CrVIO4), a disordered mixed‐valence chromium compound exhibiting inversion twinning

The structure analysis of so‐called 9CaO·4CrO₃·Cr₂O₃ proved it to be the title compound, decacalcium hexakis[chromate(V)] chromate(VI), with the simultaneous presence of unusual chromium oxidation states. The structure determination was carried out on a crystal that had inversion twinning. The Cr^VIO₄ tetrahedron is situated on a threefold axis and is disordered over two possible orientations that share three O atoms, while the Cr^VO₄ tetrahedra are in general positions and are ordered. The charge is balanced by Ca²⁺ cations, one of which is located on a threefold axis. The Ca²⁺ ions are coordinated by six, seven or eight O atoms. The compound is a significant phase in the CaO–CrO_x system and its formation reduces the refractoriness of calcium‐rich compositions in an oxidizing atmosphere.     

A Water Stable CdII‐based Metal‐Organic Framework as a Multifunctional Sensor for Selective Detection of Cu2+ and Cr2O72– Ions

A water stable tetrazolate‐containing metal‐organic framework, [Cd₂(L)(OH)(H₂O)₂]_n ( 1 ) [H₃L = 5‐(4‐(tetrazol‐5‐yl)phenyl)isophthalic acid], was synthesized under solvothermal conditions and structurally characterized. Compound 1 displays a three dimensional porous network with one dimensional tubular channels based on trinuclear cluster [Cd₃(μ₃‐OH)N₄C] units. Notably, 1 exhibits highly sensitive response to Cu²⁺ and Cr₂O₇^2– through luminescence quenching effects with the detection limit of 0.666 ppm for Cu²⁺ and 0.846 ppm for Cr₂O₇^2–, respectively. The possible mechanism of the luminescence quenching was discussed in detail.     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

Threonine stabilizer‐controlled well‐dispersed small palladium nanoparticles on modified magnetic nanocatalyst for Heck cross‐coupling process in water

We report the synthesis of magnetically separable Fe₃O₄@Silica‐Threonine‐Pd⁰ magnetic nanoparticles with a core–shell structure. After synthesis of Fe₃O₄@Silica, threonine as an efficient stabilizer/ligand was bonded to the surface of Fe₃O₄@Silica. Then, palladium nanoparticles were generated on the threonine‐modified catalyst. The threonine stabilizer helps to generate palladium nanoparticles of small size (less than 4 nm) with high dispersity and uniformity. Magnetically separable Fe₃O₄@Silica‐Threonine‐Pd⁰ nanocatalyst was fully characterized using various techniques. This nanocatalyst efficiently catalysed the Heck cross‐coupling reaction of a variety of substrates in water medium as a green, safe and inexpensive solvent at 80°C. The Fe₃O₄@Silica‐Threonine‐Pd⁰ catalyst was used for at least eight successful consecutive runs with palladium leaching of only 0.05%.     

Activation of Water‐Splitting Photocatalysts by Loading with Ultrafine Rh–Cr Mixed‐Oxide Cocatalyst Nanoparticles

The activity of many water‐splitting photocatalysts could be improved by the use of Rh^III–Cr^III mixed oxide (Rh_2?xCr_xO₃) particles as cocatalysts. Although further improvement of water‐splitting activity could be achieved if the size of the Rh_2?xCr_xO₃ particles was decreased further, it is difficult to load ultrafine (<2 nm) Rh_2?xCr_xO₃ particles onto a photocatalyst by using conventional loading methods. In this study, a new loading method was successfully established and was used to load Rh_2?xCr_xO₃ particles with a size of approximately 1.3 nm and a narrow size distribution onto a BaLa₄Ti₄O₁₅ photocatalyst. The obtained photocatalyst exhibited an apparent quantum yield of 16 %, which is the highest achieved for BaLa₄Ti₄O₁₅ to date. Thus, the developed loading technique of Rh_2?xCr_xO₃ particles is extremely effective at improving the activity of the water‐splitting photocatalyst BaLa₄Ti₄O₁₅. This method is expected to be extended to other advanced water‐splitting photocatalysts to achieve higher quantum yields.