Columnar Liquid‐Crystalline Dibenzopentacenodithiophenes by Photocyclization

The twofold glyoxylic Perkin reaction of perylene‐3,9‐diglyoxylic acid with thiophene‐diacetic acid followed by oxidative photocylization and reaction with α‐branched primary alkylamines yields columnar liquid‐crystalline diimides with two sulfur atoms in the condensed arene system. A broad temperature range of the hexagonal columnar mesophase is induced by racemic doubly branched alkyl chains. The HOMO and LUMO energy levels of these thiophene‐derived diimides qualify them as electron donors with respect to perylene diimides.     

Synthesis and Characterization of Planar Five‐Ring‐Fused Dithiophene‐dione

A series of new organic semiconductors based on s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐4,9‐dione was successfully synthesized and characterized. The electron withdrawing carbonyl group lowers the LUMO energy levels, leading to increased electronegativities, which is beneficial for high photo‐stability in air. The n‐alkyl substituted compounds, 1c and 1d , crystallize with the rigid coplanar systems packed into slipped face‐to‐face π‐stacks. Interestingly, 1c and 1d also show liquid crystalline behaviors, which give highly ordered molecular packing over large area.     

Supermolecular Columnar Liquid‐Crystalline Phosphorus Dendrimers Decorated with Sulfonamide Derivatives

A series of supermolecular liquid crystals has been synthesized by combining phosphorus dendrimers of the zero, first, and fourth generations with sulfonamide derivatives, thus generating dendromesogens bearing 6, 12, and 96 mesogenic units on their surfaces. The relevant reactions could be monitored by ¹H, ¹⁹F, and ³¹P{¹H} NMR spectroscopies. The thermal and mesomorphic properties of the products have been studied by optical microscopy, differential scanning calorimetry, and X‐ray diffraction. All of the new macromolecules prepared in this work have been found to show mesomorphic properties over a wide temperature range; moreover, for all of the compounds, the columnar mesophases observed were maintained or vitrified at room temperature. On increasing the generation of these dendromesogens, mesophases appear at lower temperatures and remain stable over a wider temperature interval. In all cases, on the basis of X‐ray analysis, a cylindrical symmetry of the molecules can be proposed to promote the supramolecular columnar arrangement observed in the mesophases. In this type of model, the height of the dendrimer clearly increases with increasing dendrimer generation, whereas its cross‐ sectional area increases only slightly, probably due to compression of the highly hyperbranched structures as a consequence of their progressive steric constraints. The mesomorphic arrangement is governed by the peripheral sulfonamide units.     

Liquid‐Crystalline Phases Made of Gold Nanoparticles

Spontaneous formation of smectic and columnar structures was observed when spherical gold nanoparticles were functionalized with mesogenic thiols (see layered structure and X‐ray pattern of a sample in smectic phase). The particle ordering is stimulated by softening of the interparticle potential and flexibility for deformation of the grafting layer.

     

Functional Liquid‐Crystalline Assemblies: Self‐Organized Soft Materials

In the 21st century, soft materials will become more important as functional materials because of their dynamic nature. Although soft materials are not as highly durable as hard materials, such as metals, ceramics, and engineering plastics, they can respond well to stimuli and the environment. The introduction of order into soft materials induces new dynamic functions. Liquid crystals are ordered soft materials consisting of self‐organized molecules and can potentially be used as new functional materials for electron, ion, or molecular transporting, sensory, catalytic, optical, and bio‐active materials. For this functionalization, unconventional materials design is required. Herein, we describe new approaches to the functionalization of liquid crystals and show how the design of liquid crystals formed by supramolecular assembly and nano‐segregation leads to the formation of a variety of new self‐organized functional materials.     

Plank‐Shaped Column‐Forming Mesogens with Substituents on One Side Only

Prolonged glyoxylation of pyrenyl‐1‐glyoxylic acid ethyl ester leads to a mixture of isomers with polar pyrenylene‐1,8‐diglyoxylic acid as the main product, whereas the centrosymmetric 1,6‐isomer is obtained in good yield from the corresponding dibromopyrene. Perkin condensations followed by Pd‐catalyzed cyclizations lead to isomeric dinaphthopyrene‐tetracarboxdiimides that self‐assemble into columnar liquid crystals of hexagonal and rectangular symmetry, of which the rectangular mesophases have unusually elongated unit cells. The cisoid diimides with both alkylimide substituents on the same side of the oblong arene system show a much greater tendency to self‐assemble into fluid stacks of disks than their centrosymmetric isomers. With racemically branched alkyl substituents, uniform vertical surface alignment of the columns in the high‐temperature hexagonal mesophase is resilient to cycling through the lower‐temperature rectangular and crystalline phases.     

Solvent‐Dependent Truxene‐Based Nanostructures

Three truxene derivatives functionalized with alkyl chains, either attached directly or distanced by linking phenyl or ethynyl groups, self‐assemble in solution and induce the gelation of different solvents in spite of not being endowed with groups able to establish strong directional interactions. A ¹H NMR study points to face‐to‐face alternating π‐stacked motifs at the origin of nucleation. Solvents play an important role in modulating the aggregation of these derivatives giving rise to fibrous or spherical superstructures. Analysis of the influence of different solvents on the morphology of the aggregates provides a better understanding of the various stages of the hierarchical self‐assembly. The way in which alkyl chains are attached to the central core also strongly affects the self‐assembling properties and gelation ability of this series. Phenyl spacers present the highest association constants in solution and give rise to gelation in a broader range of solvents. This behavior has been rationalized by means of ¹H NMR spectroscopy, X‐ray powder diffraction, SEM, and photophysical measurements. Interestingly, it was found that these compounds in the gel state exhibit unusual emission properties most likely arising from the formation of excimers, which evidences that π–π interactions also occur in the excited state.     

An Unusual Stacking Transformation in Liquid‐Crystalline Columnar Assemblies of Clicked Molecular Propellers with Tunable Light Emissions

The columnar liquid‐crystalline (LC) and fluorescence properties of three‐dimensional molecular propellers based on tetraphenylethylene is reported. X‐ray scattering studies reveal an unusual transition from a rectangular (Col_rec) to a hexagonal columnar (Col_hex) phase. In contrast to second‐order intercolumnar transitions based on a common tilt mechanism, the transition is first order and involves an unprecedented zigzag stacking of aromatic propellers in the Col_rec phase. A sudden change in emission color from sky blue to green occurs rapidly and reversibly at this transition, which is due to the planarization of the propeller mesogen.     

Voltage‐Driven Photoluminescence Modulation of Liquid‐Crystalline Hybridized ZnO Nanoparticles

Liquid‐crystalline hybrid nanomaterials have been obtained by grafting mesogenic units around luminescent ZnO nanocrystals of 5 nm in diameter. Modifying the mesogenic density around the inorganic core allows the modulation of the liquid‐crystalline behavior and its miscibility in commercial liquid crystal (LC). The strong blue photoluminescence observed for the hybrids can be modulated by applying a voltage on a LC cell containing commercial LC and 10 wt % of hybrid.     

Phototunable Liquid‐Crystalline Phases Made of Nanoparticles

The properties of liquid‐crystalline (LC) hybrid systems made of inorganic nanoparticles grafted with photosensitive azo compounds are presented. For materials with a large density of azo ligands at the surface, the LC structure can be reversibly melted by UV light, and the return to the LC state does not require the absorption of visible light. For systems with a lower density of azo ligands, UV light causes shortening of the distance between metal sublayers in the lamellar phase. Interestingly, the azo derivatives attached to the nanoparticle surface show very different kinetics of cis/trans conformational change as compared to the free molecules. The cis form of free ligands in solution is stable for days, whereas the isomerization of molecules attached to the nanoparticle surface to the trans form takes only a few minutes. Apparently, owing to the crowded environment, azo ligands immobilized at a metal surface behave as they would in the condensed state.     

Carbamoyl Radical‐Mediated Synthesis and Semipinacol Rearrangement of β‐Lactam Diols

In an approach to the biologically important 6‐azabicyclo[3.2.1]octane ring system, the scope of the tandem 4‐exo‐trig carbamoyl radical cyclization—dithiocarbamate group transfer reaction to ring‐fused β‐lactams is evaluated. β‐Lactams fused to five‐, six‐, and seven‐membered rings are prepared in good to excellent yield, and with moderate to complete control at the newly formed dithiocarbamate stereocentre. No cyclization is observed with an additional methyl substituent on the terminus of the double bond. Elimination of the dithiocarbamate group gives α,β‐ or β,γ‐unsaturated lactams depending on both the methodology employed (base‐mediated or thermal) and the nature of the carbocycle fused to the β‐lactam. Fused β‐lactam diols, obtained from catalytic OsO₄‐mediated dihydroxylation of α,β‐unsaturated β‐lactams, undergo semipinacol rearrangement via the corresponding cyclic sulfite or phosphorane to give keto‐bridged bicyclic amides by exclusive N‐acyl group migration. A monocyclic β‐lactam diol undergoes Appel reaction at a primary alcohol in preference to semipinacol rearrangement. Preliminary investigations into the chemo‐ and stereoselective manipulation of the two carbonyl groups present in a representative 7,8‐dioxo‐6‐azabicyclo[3.2.1]octane rearrangement product are also reported.     

New Architecture of Liquid‐Crystalline Polymers from Fluorinated Vinylcyclopropanes

A new class of fluorinated polymers was prepared by radical ring‐opening homopolymerization of vinylcyclopropane monomers with a perfluorinated (CF₂)_nF chain (n = 6, 8, or 10). The polymers were in fact copolymers composed of 1,5‐linear and cyclobutane isomer units, the relative content of which depended on n. Surprisingly, they formed liquid‐crystalline mesophases (SmB_d and/or SmA_d), which was attributed to phase separation of the incompatible fluorocarbon and hydrocarbon components of the repeat unit.     

Photoluminescent and Liquid‐Crystalline Properties of Donor–Acceptor‐Type 2,5‐Diarylthiazoles

The synthesis of donor–acceptor‐type 2,5‐diarylthiazoles that bear electron‐donating N,N‐dialkylamine and electron‐withdrawing cyano groups at the 2‐ and 5‐position, respectively, were carried out with transition‐metal‐catalyzed C? H arylation reactions developed by us. The compounds were synthesized by the C? H arylation of unsubstituted thiazole at the 2‐position with a palladium/copper catalyst in the presence of tetrabutylammonium fluoride (TBAF) as an activator. Further C? H arylation of the 2‐arylated thiazole at the 5‐position was carried out by the palladium‐catalyzed reaction in the presence of silver(I) fluoride to afford the donor–acceptor‐type 2,5‐diarylthiazoles with N,N‐dialkylamine groups of different chain lengths. The UV/Vis absorption, photoluminescence, and electrochemical behavior were similar regardless of chain length, whereas liquid‐crystalline behavior and thermal characteristics were found to be dependent on the alkyl‐chain length. The compounds with N,N‐diethylamine or N‐butyl‐N‐methyl groups showed a stable liquid‐crystalline phase over a wide temperature range as well as higher stability to thermal decomposition.