Phenylenevinylene Block Copolymers via Ring‐Opening Metathesis Polymerization

Fully conjugated block copolymers containing 1,4‐ and 1,3‐phenylenevinylene repeating units can be prepared by the sequential ring opening metathesis polymerization of strained cyclophanedienes, initiated by ruthenium carbene complexes (Grubbs metathesis catalysts). The molecular weight of the constituent blocks can be tightly controlled by changing the catalyst to monomer ratio and the volume fraction of the block copolymers independently tailored by the ratio of the monomers employed. Extensive phase separation between the constituent blocks is observed in thin films of these polymers by atomic force microscopy and efficient energy transfer between blocks containing 1,4‐ and 1,3‐phenylenevinylene units can be seen in the photoluminescence of these materials.

     

Block Copolypeptides Prepared by N‐Carboxyanhydride Ring‐Opening Polymerization

N‐Carboxyanhydride ring‐opening polymerization (NCA ROP) is a synthetically straightforward methodology to generate homopolypeptides. Extensive control over the polymerization permits the production of highly monodisperse synthetic polypeptides to a targeted molecular weight in the absence of unfavorable side reactions. Sequential NCA ROP permits the creation of block copolypeptides composed of individual polypeptide blocks boasting different functionalities, secondary structures, and desirable chemical properties. Consequently, a plethora of novel materials have been generated that have found wide‐range applicability. This review offers an insight into contemporary synthetic approaches toward NCA ROP before highlighting a number of block copolypeptide architectures generated.     

Amphiphilic Block‐Graft Copolymers with a Degradable Backbone and Polyethylene Glycol Pendant Chains Prepared via Ring‐Opening Polymerization of a Macromonomer

Well‐defined amphiphilic block‐graft copolymers PCL‐b‐[DTC‐co‐(MTC‐mPEG)] with polyethylene glycol methyl ether pendant chains were designed and synthesized. First, monohydroxyl‐terminated macroinitiators PCL‐OH were prepared. Then, ring‐opening copolymerization of 2,2‐dimethyltrimethylene carbonate (DTC) and cyclic carbonate‐terminated PEG (MTC‐mPEG) macromonomer was carried out in the presence of the macroinitiator in bulk to give the target copolymers. All the polymers were characterized by ¹H NMR and gel permeation chromatography (GPC). The polymers have unimodal molecular weight distributions and moderate polydispersity indexes. The amphiphilic block‐graft copolymers self‐assemble in water forming stable micelle solutions with a narrow size distribution.

     

Oxidation‐Triggered Ring‐Opening Metathesis Polymerization

Eight new N‐Hoveyda‐type complexes were synthesized in yields of 67–92 % through reaction of [RuCl₂(NHC)(Ind)(py)] (NHC=1,3‐bis(2,4,6‐trimethylphenylimidazolin)‐2‐ylidene (SIMes) or 1,3‐bis(2,6‐diisopropylphenylimidazolin)‐2‐ylidene (SIPr), Ind=3‐phenylindenylid‐1‐ene, py=pyridine) with various 1‐ or 1,2‐substituted ferrocene compounds with vinyl and amine or imine substituents. The redox potentials of the respective complexes were determined; in all complexes an iron‐centered oxidation reaction occurs at potentials close to E=+0.5 V. The crystal structures of the reduced and of the respective oxidized Hoveyda‐type complexes were determined and show that the oxidation of the ferrocene unit has little effect on the ruthenium environment. Two of the eight new complexes were found to be switchable catalysts, in that the reduced form is inactive in the ring‐opening metathesis polymerization of cis‐cyclooctene (COE), whereas the oxidized complexes produce polyCOE. The other complexes are not switchable catalysts and are either inactive or active in both reduced and oxidized states.     

One‐Step Ring Opening Metathesis Block‐Like Copolymers and their Compositional Analysis by a Novel Retardation Technique

Using a one‐step synthetic route for block copolymers avoids the repeated addition of monomers to the polymerization mixture, which can easily lead to contamination and, therefore, to the unwanted termination of chain growth. For this purpose, monomers ( M1 – M5 ) with different steric hindrances and different propagation rates are explored. Copolymerization of M1 (propagating rapidly) with M2 (propagating slowly), M1 with M3 (propagating extremely slowly) and M4 (propagating rapidly) with M5 (propagating slowly) yielded diblock‐like copolymers using Grubbs’ first ( G1 ) or third generation catalyst ( G3 ). The monomer consumption was followed by ¹H NMR spectroscopy, which revealed vastly different reactivity ratios for M1 and M2 . In the case of M1 and M3 , we observed the highest difference in reactivity ratios (r₁=324 and r₂=0.003) ever reported for a copolymerization method. A triblock‐like copolymer was also synthesized using G3 by first allowing the consumption of the mixture of M1 and M2 and then adding M1 again. In addition, in order to measure the fast reaction rates of the G3 catalyst with M1 , we report a novel retardation technique based on an unusual reversible G3 Fischer‐carbene to G3 benzylidene/alkylidene transformation.     

Photoresponsive Gels Prepared by Ring‐Opening Metathesis Polymerization

This communication describes photoresponsive gels, prepared using ring‐opening metathesis polymerization (ROMP), that dissolve upon irradiation with ultraviolet light. Exposure of mixtures of norbornene‐type ROMP monomers and new photoreactive cross‐linkers comprising two norbornene units bound through a chain containing o‐nitrobenzyl esters (NBEs) to well‐known ruthenium carbene catalysts gave cross‐linked polymer networks that swelled in organic solvents or water depending on the structure of the monomer. These gels became homogeneous upon irradiation with UV light, consistent with breaking of the cross‐links through photolysis of the NBE groups. The irradiation time required for homogenization of the gels depended on the cross‐link density and the structure of the photoresponsive cross‐linker.

     

Supramolecular Alternating Block Copolymers via Metal Coordination

Suprapolymers : The synthesis of symmetrically end‐functionalized polymers in a single step has been developed by means of ring‐opening metathesis polymerization by using a bimetallic ruthenium initiator and functional chain terminators. Self‐assembly of the resulting polymers allows for the formation of supramolecular alternating block copolymers (see figure).

     

One-Step Ring Opening Metathesis Block-Like Copolymers and their Compositional Analysis by a Novel Retardation Technique

Using a one-step synthetic route for block copolymers avoids the repeated addition of monomers to the polymerization mixture, which can easily lead to contamination and, therefore, to the unwanted termination of chain growth. For this purpose, monomers ( M1 – M5 ) with different steric hindrances and different propagation rates are explored. Copolymerization of M1 (propagating rapidly) with M2 (propagating slowly), M1 with M3 (propagating extremely slowly) and M4 (propagating rapidly) with M5 (propagating slowly) yielded diblock-like copolymers using Grubbs’ first ( G1 ) or third generation catalyst ( G3 ). The monomer consumption was followed by ¹H NMR spectroscopy, which revealed vastly different reactivity ratios for M1 and M2 . In the case of M1 and M3 , we observed the highest difference in reactivity ratios (r₁=324 and r₂=0.003) ever reported for a copolymerization method. A triblock-like copolymer was also synthesized using G3 by first allowing the consumption of the mixture of M1 and M2 and then adding M1 again. In addition, in order to measure the fast reaction rates of the G3 catalyst with M1 , we report a novel retardation technique based on an unusual reversible G3 Fischer-carbene to G3 benzylidene/alkylidene transformation.     

Antimicrobial Polymers Prepared by Ring‐Opening Metathesis Polymerization: Manipulating Antimicrobial Properties by Organic Counterion and Charge Density Variation

The synthesis and characterization of a series of poly(oxanorbornene)‐based synthetic mimics of antimicrobial peptides (SMAMPs) is presented. In the first part, the effect of different organic counterions on the antimicrobial properties of the SMAMPs was investigated. Unexpectedly, adding hydrophobicity by complete anion exchange did not increase the SMAMPs’ antimicrobial activity. It was found by dye‐leakage studies that this was due to the loss of membrane activity of these polymers caused by the formation of tight ion pairs between the organic counterions and the polymer backbone. In the second part, the effect of molecular charge density on the biological properties of a SMAMP was investigated. The results suggest that, above a certain charge threshold, neither minimum inhibitory concentration (MIC₉₀) nor hemolytic activity (HC₅₀) is greatly affected by adding more cationic groups to the molecule. A SMAMP with an MIC₉₀ of 4 μg mL^?1 against Staphylococcus aureus and a selectivity (=HC₅₀/MIC₉₀) of 650 was discovered, the most selective SMAMP to date.     

Ring‐Opening Metathesis Polymerization Based Post‐Synthesis Functionalization of Electron Beam Curing Derived Monolithic Media

Monolithic materials were prepared via electron‐beam curing from ethyl methacrylate, trimethylolpropane triacrylate, and norborn‐5‐ene‐2‐ylmethyl acrylate. Reaction of the norborn‐2‐ene groups with either RuCl₂(PCy₃)₂(CHPh) ( 1 ) or RuCl₂(PCy₃)(1,3‐dimesityl‐4,5‐dihydroimidazol‐2‐inylidene)(CHPh) ( 2 ) resulted in the surface attachment of the initiators. The extent of initiator immobilization was found to be substantially higher for 1 than for 2 . Reaction of the surface immobilized initiators with various monomers resulted in the desired surface modification of EB‐derived monoliths. The amounts of grafted monomer were determined by elemental analysis and ICP‐OES.

     

Tandem Ring‐Opening Metathesis – Vinyl Insertion Polymerization: Fundamentals and Application to Functional Polyolefins

The accomplishments in the copolymerization of ethylene with cyclic olefins such as norborn‐2‐ene or cis‐cyclooctene via tandem ring‐opening metathesis polymerization (ROMP) – vinyl insertion polymerization (VIP) are outlined. This approach provides polyolefins with high molecular weight (600,000 < M_n < 4,500,000 g mol⁻¹) and substantial amounts of double bonds along the polymer main chain. Olefinic moieties in ROMP‐derived polymers can be converted into hydroxyl, amino, silyl, ester, or carboxylate groups by different means including controlled radical polymerization‐based grafting. The underlying concept for the switch in polymerization mechanism, the resulting pre‐catalyst requirements, limitations and challenges and the chemistry developed for functionalizing unsaturated polymers are outlined in detail.

     

Polymer‐Peptide Block Copolymers – An Overview and Assessment of Synthesis Methods

Incorporating peptide blocks into block copolymers opens up new realms of bioactive or smart materials. Because there are such a variety of peptides, polymers, and hybrid architectures that can be imagined, there are many different routes available for the synthesis of these chimera molecules. This review summarizes the contemporary strategies in combining synthesis techniques to create well‐defined peptide‐polymer hybrids that retain the vital aspects of each disparate block. Living polymerization can be united with the molecular‐level control afforded by peptide blocks to yield block copolymers that not only have precisely defined primary structures, but that also interact with other (bio)molecules in a well defined manner.

     

Amino‐Acid‐Based Block Copolymers by RAFT Polymerization

This review summarizes recent advances in the design and synthesis of amino‐acid‐based block copolymers by reversible addition–fragmentation chain transfer (RAFT) polymerization of amino‐acid‐bearing monomers. We will mainly focus on stimuli‐responsive block copolymers, such as pH‐, thermo‐, and dual‐stimuli‐responsive block copolymers, and self‐assembled block copolymers, including amphiphilic and double‐hydrophilic block copolymers having tunable chiroptical properties. We will also highlight recent results in RAFT synthesis of amino‐acid‐based copolymers having various properties, such as catalytic and optoelectronic properties, cross‐linked block copolymer micelles, unimolecular micelles, and organic–inorganic hybrids.     

Hierarchical Self‐Assembly of Double‐Crystalline Poly(ferrocenyldimethylsilane)‐block‐poly(2‐iso‐propyl‐2‐oxazoline) (PFDMS‐b‐PiPrOx) Block Copolymers

The step‐wise solution self‐assembly of double crystalline organometallic poly(ferrocenyldimethylsilane)‐block‐poly(2‐iso‐propyl‐2‐oxazoline) (PFDMS‐b‐PiPrOx) diblock copolymers is demonstrated. Two block copolymers are obtained by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC), featuring PFDMS/PiPrOx weight fractions of 46/54 (PFDMS₃₀‐b‐PiPrOx₇₅) and 30/70 (PFDMS₃₀‐b‐PiPrOx₁₅₅). Nonsolvent induced crystallization of PFDMS in acetone leads in both cases to cylindrical micelles with a PFDMS core. Afterward, the structures are transferred into water for sequential temperature‐induced crystallization of the PiPrOx corona, leading to hierarchical double crystalline superstructures, which are investigated using scanning electron microscopy, wide angle X‐ray scattering, and differential scanning calorimetry.

     

Ring‐Opening Metathesis Polymerization in Aqueous Media Using a Macroinitiator Approach

Water‐soluble and amphiphilic polymers are of great interest to industry and academia, as they can be used in applications such as biomaterials and drug delivery. Whilst ring‐opening metathesis polymerization (ROMP) is a fast and functional group tolerant methodology for the synthesis of a wide range of polymers, its full potential for the synthesis of water‐soluble polymers has yet to be realized. To address this, we report a general strategy for the synthesis of block copolymers in aqueous milieu using a commercially available ROMP catalyst and a macroinitiator approach. This allows for excellent control in the preparation of block copolymers in water. If the second monomer is chosen such that it forms a water‐insoluble polymer, polymerization‐induced self‐assembly (PISA) occurs and a variety of self‐assembled nano‐object morphologies can be accessed.     

Orthogonally Self‐Assembled Multifunctional Block Copolymers

We report the synthesis of telechelic poly(norbornene) and poly(cyclooctene) homopolymers by ring‐opening metathesis polymerization (ROMP) and their subsequent functionalization and block copolymer formation based on noncovalent interactions. Whereas all the poly(norbornene)s contain either a metal complex or a hydrogen‐bonding moiety along the polymer side‐chains, together with a single hydrogen‐bonding‐based molecular recognition moiety at one terminal end of the polymer chain. These homopolymers allow for the formation of side‐chain‐functionalized AB and ABA block copolymers through self‐assembly. The orthogonal natures of all side‐ and main‐chain self‐assembly events were demonstrated by ¹H NMR spectroscopy and isothermal titration calorimetry. The resulting fully functionalized block copolymers are the first copolymers combining both side‐ and main‐chain self‐assembly, thereby providing a high degree of control over copolymer functionalization and architecture and bringing synthetic materials one step closer to the dynamic self‐assembly structures found in nature.     

Responsive Linear‐Dendritic Block Copolymers

The combination of dendritic and linear polymeric structures in the same macromolecule opens up new possibilities for the design of block copolymers and for applications of functional polymers that have self‐assembly properties. There are three main strategies for the synthesis of linear‐dendritic block copolymers (LDBCs) and, in particular, the emergence of click chemistry has made the coupling of preformed blocks one of the most efficient ways of obtaining libraries of LDBCs. In these materials, the periphery of the dendron can be precisely functionalised to obtain functional LDBCs with self‐assembly properties of interest in different technological areas. The incorporation of stimuli‐responsive moieties gives rise to smart materials that are generally processed as self‐assemblies of amphiphilic LDBCs with a morphology that can be controlled by an external stimulus. Particular emphasis is placed on light‐responsive LDBCs. Furthermore, a brief review of the biomedical or materials science applications of LDBCs is presented.