Host‐Assisted Guest Self‐Assembly: Enhancement of the Dimerization of Pyronines Y and B by γ‐Cyclodextrin

Buckle up! The dimerization of small fluorescent guests is strongly enhanced in presence of a cyclodextrin host. The host cavity acts like a belt to assist the self‐assembly of guests (see picture). Small variations in the guest structure have significant influence on the stability and geometry of the aggregates.

     

Water‐Soluble Molecular Capsules: Self‐Assembly and Binding Properties

The self‐assembly and characterization of water‐soluble calix[4]arene‐based molecular capsules ( 1?2 ) is reported. The assemblies are the result of ionic interactions between negatively charged calix[4]arenes 1 a and 1 b , functionalized at the upper rim with amino acid moieties, and a positively charged tetraamidiniumcalix[4]arene 2 . The formation of the molecular capsules is studied by ¹H NMR spectroscopy, ESI mass spectrometry (ESI‐MS), and isothermal titration calorimetry (ITC). A molecular docking protocol was used to identify potential guest molecules for the self‐assembled capsule 1 a?2 . Experimental guest encapsulation studies indicate that capsule 1 a?2 is an effective host for both charged (N‐methylquinuclidinium cation) and neutral molecules (6‐amino‐2‐methylquinoline) in water.     

Structural Analysis and Inclusion Mechanism of Native and Permethylated α‐Cyclodextrin‐Based Rotaxanes Containing Alkylene Axles

Native α‐cyclodextrin‐ (α‐CD) and permethylated α‐CD (PMeCD)‐based rotaxanes with various short alkylene chains as axles can be synthesized through a urea end‐capping method. Native α‐CD tends to form [3]‐ or [5]pseudorotaxanes and not [2]‐ or [4]pseudorotaxanes, which indicates that the coupled CDs act as a single fragment. End‐capping reactions of the pseudorotaxanes with C18 and C24 axle lengths do not occur because the axle termini are covered by the densely stacked CDs. The number of PMeCDs on the pseudorotaxane is flexible and mainly depends on the axle length. Peracetylated α‐CD (PAcCD)‐based rotaxanes are synthesized through O‐acetylation of the α‐CD‐based rotaxanes without any decomposition of the rotaxanated structures. The structures of PMeCD‐based [3]‐ and [4]rotaxanes, and the molecular dynamics calculations on [3]pseudorotaxanes, indicate that the tail face of PMeCDs is regularly directed toward the axle termini. On the basis of the results obtained, it can be concluded that the directions and numbers of CDs in rotaxanes containing short alkylene chains depend on 1) the interactions between CDs, 2) the length of the alkylene axle, and 3) the interactions between the axle end and tail face of the CD.     

Multistimuli‐Responsive Supramolecular Assembly of Cucurbituril/Cyclodextrin Pairs with an Azobenzene‐Containing Bispyridinium Guest

A linear supramolecular architecture was successfully constructed by the inclusion complexation of α‐cyclodextrin with azobenzene and the host‐stabilized charge‐transfer interaction of naphthalene and a bispyridinium guest with cucurbit[8]uril in water, which was comprehensively characterized by ¹H NMR spectroscopy, UV/Vis absorption, fluorescence, circular dichroism spectroscopy, dynamic laser scattering, and microscopic observations. Significantly, because it benefits from the photoinduced isomerization of the azophenyl group and the chemical reduction of bispyridinium moiety with noncovalent connections, the assembly/disassembly process of this supramolecular nanostructure can be efficiently modulated by external stimuli, including temperature, UV and visible‐light irradiation, and chemical redox.     

Self‐Assembly and Host–Guest Chemistry of a 3.5‐nm Coordination Nanotube

Upon complexation with Pd^II ions, precisely designed strandlike ligands with two tris(3,5‐pyridine) units at both terminals were assembled, with the aid of a linear template molecule, into a discrete tubular complex with a length of 3.5 nm. The high stability and the well‐defined structure of the coordination nanotube were revealed by NMR spectroscopy, cold‐spray ionization MS, and single‐crystal X‐ray analysis. Guest lengths were discriminated by the tube: When the association of strandlike guest molecules, in which two biphenylene units are linked with an (OCH₂CH₂)_n linker, were compared, the tube selectively recognized an appropriate guest whose length was comparable to that of the tube. Tetrathiafulvalene (TTF)‐terminated linear guests were directly oxidized to TTF²⁺ in the tube, but reduced stepwise via TTF^+? outside the tube.     

Self‐Assembly and Disassembly of Vesicles as Controlled by Anion–π Interactions

Anion–π interactions have been widely studied as new noncovalent driving forces in supramolecular chemistry. However, self‐assembly induced by anion–π interactions is still largely unexplored. Herein we report the formation of supramolecular amphiphiles through anion–π interactions, and the subsequent formation of self‐assembled vesicles in water. With the π receptor 1 as the host and anionic amphiphiles, such as sodium dodecylsulfate (SDS), sodium laurate (SLA), and sodium methyl dodecylphosphonate (SDP), as guests, the sequential formation of host–guest supramolecular amphiphiles and self‐assembled vesicles was demonstrated by SEM, TEM, DLS, and XRD techniques. The intrinsic anion–π interactions between 1 and the anionic amphiphiles were confirmed by crystal diffraction, HRMS analysis, and DFT calculations. Furthermore, the controlled disassembly of the vesicles was promoted by competing anions, such as NO₃^?, Cl^?, and Br^?, or by changing the pH value of the medium.     

Self‐Assembly Pluronic and β‐Cyclodextrin to Hollow Nanospheres for Enhanced Gene Delivery

This paper studies a kind of hollow nanospheres prepared by self‐assembly β‐cyclodextrins (β‐CDs) and poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (pluronic F127) for gene delivery. It was found that this kind of hollow nanospheres enable load PEI10K/DNA and the resulting F127 NH₂ βCD/(PEI10K/DNA) with 0.08 µg/well DNA display equal or higher gene delivery capability compared to PEI10K/DNA with 1 µg/well DNA in the absence or presence of serum. The cytotoxicity of the nanospheres was over 100 times lower than that of PEI10K.

     

Inclusion Behavior of β‐Cyclodextrin with Bipyridine Molecules: Factors Governing Host‐Guest Inclusion Geometries

Guest Effect : The differences of nitrogen atom positions and the bridge bonds linked to two pyridine rings of some bipyridine guests can significantly affect the binding abilities and inclusion geometries of β‐cyclodextrin with the guests in both the solution and solid states.

     

Synthesis of β‐Cyclodextrin Containing Copolymer via “Click” Chemistry and Its Self‐Assembly in the Presence of Guest Compounds

We report the synthesis of a hydrophilic copolymer with one polyethylene glycol (PEG) block and one β‐cyclodextrin (β‐CD) containing block by a “click” reaction between azido‐substituted β‐CD and propargyl flanking copolymer. ¹H NMR study suggested a highly efficient conjugation of β‐CD units by this approach. The obtained copolymer was used as a host macromolecule to construct assemblies in the presence of hydrophobic guests. For assemblies containing a hydrophobic polymer, their size can be simply adjusted by simply changing the content of hydrophobic component. By serving as a guest molecule, hydrophobic drugs can also be loaded accompanying the formation of nanoparticles, and the drug payload is releasable. Therefore, the copolymer synthesized herein can be employed as a carrier for drug delivery.     

β‐Cyclodextrin Duplexes That Are Connected through Two Disulfide Bonds: Potent Hosts for the Complexation of Organic Molecules

New tubular host molecules, which are composed of two β‐cyclodextrin macrocycles that are connected through two disulfide bonds, have been prepared by the air‐promoted oxidation of 6^I,6^IV‐dideoxy‐6^I,6^IV‐disulfanyl‐β‐cyclodextrin in aqueous solution. This reaction leads to three products: monomeric intramolecular disulfide and two dimeric species, which are termed as “non‐eclipsed” and “eclipsed” cyclodextrin duplexes. Oxidation at a concentration of the starting thiol of 0.1 mM gave the intramolecular disulfide as the major product whereas a concentration in the millimolar range afforded the dimeric species as the dominant products. The tubular structure of the “non‐eclipsed” isomer was unequivocally determined by X‐ray analysis. The binding affinities of the duplexes to a wide range of compounds, including fluorescent dyes and clinically used drugs Imatinib and Esomeprazol, were studied in water by ITC. For most guest compounds, the experimentally determined K_a values were in the range 10⁷–10⁸ M ^?1. These binding affinities are significantly higher than those found in the literature for analogous complexes with native cyclodextrins. In cases of binding of neutral or anionic guest molecules cyclodextrin duplexes outperformed cucurbiturils. A complex between a duplex and Nile blue was used to investigate its ability to penetrate the cytoplasmic membrane of HeLa cells. We found that the complex accumulated in the cell membrane but did not pass into cytosol. Importantly, the complex did not decompose to a significant extent under high dilution in the cellular environment.     

Self‐Assembly of Amphiphilic Anthracene‐Functionalized β‐Cyclodextrin (CD‐AN) through Multi‐Micelle Aggregation

Multi‐micelle aggregation (MMA) mechanism is widely acknowledged to explicate large spherical micelles self‐assembly, but the process of MMA during self‐assembly is hard to observe. Herein, a novel kind of strong, regular microspheres fabricated from self‐assembly of amphiphilic anthracene‐functionalized β‐cyclodextrin (CD‐AN) via Cu(I)‐catalyzed azide‐alkyne click reactions is reported. The obtained CD‐AN amphiphiles can self‐assemble in water from primary core–shell micelles to secondary aggregates with the diameter changing from several tens nm to around 600–700 nm via MMA process according to the images of scanning electron microscopy, transmission electron microscopy, and atomic force microscopy as well as the dynamic light scattering measurements, followed by further crosslinking through photo‐dimerization of anthracene. What merits special attention is that such photo‐crosslinked self‐assemblies are able to disaggregate reversibly into primary nanoparticles when changing the solution conditions, which is benefited from the designed regular structure of CD‐AN and the rigid ranging of anthracene during assembly, thus confirming the process of MMA.

     

Noncovalently connected micelles based on a β‐cyclodextrin‐containing polymer and adamantane end‐capped poly(ε‐caprolactone) via host–guest interactions

New random copolymers, poly(N‐vinyl‐2‐pyrrolidone‐co‐mono‐6‐deoxy‐6‐methacrylate ethylamino‐β‐cyclodextrin) (PnvpCD) bearing pendent β‐cyclodextrin (CD) groups were synthesized. PnvpCD formed soluble graft‐like polymer complex with adamantane (AD) end‐capped poly(ε‐caprolactone) (PclAD) in their common solvent N‐methyl‐2‐pyrrolidone driven by the inclusion interactions between the CD and AD groups. The formation of the graft complex has been confirmed by viscometry, dynamic light scattering (DLS), and isothermal titration calorimeter. The graft complex self‐assembled further into noncovalently connected micelles in water, which is a selective solvent for the main chain PnvpCD. Transmission electron microscopy, DLS, and atomic force microscopy have been used to investigate the structure and morphology of the resultant micelles. A unique “multicore” structure of the micelles, in which small PclAD domains scattered within the micelles, was obtained under nonequilibrium conditions in the preparation. However, the micelles prepared in a condition close to equilibrium possess an ordinary core‐shell structure. In both cases, the core and shell are believed to be connected by the AD‐CD inclusion complexation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4267–4278, 2009     

Palladium‐Templated Subcomponent Self‐Assembly of Macrocycles,Catenanes, and Rotaxanes

The reaction of 2,6‐diformylpyridine with diverse amines and Pd^II ions gave rise to a variety of metallosupramolecular species, in which the Pd^II ion is observed to template a tridentate bis(imino)pyridine ligand. These species included a mononuclear complex as well as [2+2] and [3+3] macrocycles. The addition of pyridine‐containing macrocyclic capping ligands allows for topological complexity to arise, thereby enabling the straightforward preparation of structures that include a [2]catenane, a [2]rotaxane, and a doubly threaded [3]rotaxane.     

A Hollow Foldecture with Truncated Trigonal Bipyramid Shape from the Self‐Assembly of an 11‐Helical Foldamer

The creation of self‐assembling microscale architectures that possess new and useful physical properties remains a significant challenge. Herein we report that an 11‐helical foldamer self‐assembles in a controlled manner to form a series of 3D foldectures with unusual three‐fold symmetrical shapes that are distinct from those generated from 12‐helical foldamers. The foldamer packing motif was revealed by powder X‐ray diffraction technique, and provides an important link between the molecular‐level symmetry and the microscale morphologies. The utility of foldectures with hollow interiors as robust and well‐defined supramolecular hosts was demonstrated for inorganic, organic, and even protein guests. This work will pave the way for the design of functional foldectures with greater 3D shape diversity and for the development of biocompatible delivery vehicles and containment vessels.     

Controlled Self‐Assembly by Mono‐p‐sulfonatocalix[n]arenes and Bis‐p‐sulfonatocalix[n]arenes

The complexation‐induced critical aggregation concentrations of 1‐pyrenemethylaminium by mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes (n=4, 5) were systemically measured by fluorescence spectroscopy. In all cases, the complexation‐induced critical aggregation concentration decreases by about 3 times upon addition of p‐sulfonatocalix[n]arenes. However, the optimal molar ratios for the aggregation of 1‐pyrenemethylaminium by mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes are distinctly different: For mono‐p‐sulfonatocalix[n]arenes, the optimum mixing ratio for the aggregation of 1‐pyrenemethylaminium is 1:4 mono‐p‐sulfonatocalix[n]arenes/1‐pyrenemethylaminium, whereas only 2.5 molecules of 1‐pyrenemethylaminium can be bound by one cavity of bis‐p‐sulfonatocalix[n]arenes. The intermolecular complexation of mono‐p‐sulfonatocalix[n]arenes and bis‐p‐sulfonatocalix[n]arenes with 1‐pyrenemethylaminium led to the formation of two distinctly different nanoarchitectures, which were shown to be nanoscale vesicle and rod aggregates, respectively, by using dynamic laser scattering, TEM, and SEM. This behavior is also different from the fiber‐like aggregates with lengths of several micrometers that were formed by 1‐pyrenemethylaminium itself above its critical aggregation concentration. Furthermore, the obtained nanoaggregates exhibit benign water solubility, self‐labeled fluorescence, and, more importantly, temperature responsiveness.     

Access to Versatile β‐Cyclodextrin Scaffolds through Guest‐Mediated Monoacylation

Herein, we report the selective mono‐derivatization of heptakis[6‐deoxy‐6‐(2‐aminoethylsulfanyl)]‐β‐CD ( 1 ) through a guest‐mediated covalent capture strategy. The use of guests functionalized with cleavable linkers enables the installation of an amine‐orthogonal thiol group on the primary rim of 1 as a handle for further transformations to the β‐CD scaffold. Applying this methodology, two novel monoderivatized β‐CDs were obtained in good yield and high purity. Both of these monoacylated CDs were amenable to facile linker cleavage and further modification at the resulting thiol group. This methodology can be applied towards the synthesis heterofunctionalized β‐CD constructs for analyte sensing, drug delivery, and other applications.     

Modulating the Nucleated Self‐Assembly of Tri‐β3‐Peptides Using Cucurbit[n]urils

The modulation of the hierarchical nucleated self‐assembly of tri‐β³‐peptides has been studied. β³‐Tyrosine provided a handle to control the assembly process through host‐guest interactions with CB[7] and CB[8]. By varying the cavity size from CB[7] to CB[8] distinct phases of assembling tri‐β³‐peptides were arrested. Given the limited size of the CB[7] cavity, only one aromatic β³‐tyrosine can be simultaneously hosted and, hence, CB[7] was primarily acting as an inhibitor of self‐assembly. In strong contrast, the larger CB[8] can form a ternary complex with two aromatic amino acids and hence CB[8] was acting primarily as cross‐linker of multiple fibers and promoting the formation of larger aggregates. General insights on modulating supramolecular assembly can lead to new ways to introduce functionality in supramolecular polymers.