Synthesis of Hollow Mesoporous TiO2 Microspheres with Single and Double Au Nanoparticle Layers for Enhanced Visible‐Light Photocatalysis

A facile method was used to prepare hollow mesoporous TiO₂ and Au@TiO₂ spheres using polystyrene (PS) templates. Au nanoparticles (NPs) were simultaneously synthesized and attached on the surface of PS spheres by reducing AuCl₄^? ions using sodium citrate which resulted in the uniform deposition of Au NPs. The outer coating of titania via sol‐gel produced PS@Au@TiO₂ core–shell spheres. Removing the templates from these core–shell spheres through calcination produced hollow mesoporous and crystalline Au@TiO₂ spheres with Au NPs inside the TiO₂ shell in a single step. Anatase spheres with double Au NPs layers, one inside and another outside of TiO₂ shell, were also prepared. Different characterization techniques indicated the hollow mesoporous and crystalline morphology of the prepared spheres with Au NPs. Hollow anatase spheres with Au NPs indicated enhanced harvesting of visible light and therefore demonstrated efficient catalytic activity toward the degradation of organic dyes under the irradiation of visible light as compared to bare TiO₂ spheres.     

Magnetic Nanohybrids Loaded with Bimetal Core–Shell–Shell Nanorods for Bacteria Capture,Separation, and Near‐Infrared Photothermal Treatment

A novel antimicrobial nanohybrid based on near‐infrared (NIR) photothermal conversion is designed for bacteria capture, separation, and sterilization (killing). Positively charged magnetic reduced graphene oxide with modification by polyethylenimine (rGO–Fe₃O₄–PEI) is prepared and then loaded with core–shell–shell Au–Ag–Au nanorods to construct the nanohybrid rGO–Fe₃O₄–Au–Ag–Au. NIR laser irradiation melts the outer Au shell and exposes the inner Ag shell, which facilitates controlled release of the silver shell. The nanohybrids combine physical photothermal sterilization as a result of the outer Au shell with the antibacterial effect of the inner Ag shell. In addition, the nanohybrid exhibits high heat conductivity because of the rGO and rapid magnetic‐separation capability that is attributable to Fe₃O₄. The nanohybrid provides a significant improvement of bactericidal efficiency with respect to bare Au–Ag–Au nanorods and facilitates the isolation of bacteria from sample matrixes. A concentration of 25 μg mL^?1 of nanohybrid causes 100 % capture and separation of Escherichia coli O157:H7 (1×10⁸ cfu mL^?1) from an aqueous medium in 10 min. In addition, it causes a 22 °C temperature rise for the surrounding solution under NIR irradiation (785 nm, 50 mW cm^?2) for 10 min. With magnetic separation, 30 μg mL^?1 of nanohybrid results in a 100 % killing rate for E. coli O157:H7 cells. The facile bacteria separation and photothermal sterilization is potentially feasible for environmental and/or clinical treatment.     

A General and High‐Yield Galvanic Displacement Approach to Au?M (M=Au,Pd, and Pt) Core–Shell Nanostructures with Porous Shells and Enhanced Electrocatalytic Performances

In this work, we utilize the galvanic displacement synthesis and make it a general and efficient method for the preparation of Au? M (M=Au, Pd, and Pt) core–shell nanostructures with porous shells, which consist of multilayer nanoparticles. The method is generally applicable to the preparation of Au? Au, Au? Pd, and Au? Pt core–shell nanostructures with typical porous shells. Moreover, the Au? Au isomeric core–shell nanostructure is reported for the first time. The lower oxidation states of Au^I, Pd^II, and Pt^II are supposed to contribute to the formation of porous core–shell nanostructures instead of yolk‐shell nanostructures. The electrocatalytic ethanol oxidation and oxygen reduction reaction (ORR) performance of porous Au? Pd core–shell nanostructures are assessed as a typical example for the investigation of the advantages of the obtained core–shell nanostructures. As expected, the Au? Pd core–shell nanostructure indeed exhibits a significantly reduced overpotential (the peak potential is shifted in the positive direction by 44 mV and 32 mV), a much improved CO tolerance (I_f/I_b is 3.6 and 1.63 times higher), and an enhanced catalytic stability in comparison with Pd nanoparticles and Pt/C catalysts. Thus, porous Au? M (M=Au, Pd, and Pt) core–shell nanostructures may provide many opportunities in the fields of organic catalysis, direct alcohol fuel cells, surface‐enhanced Raman scattering, and so forth.     

Electronic and Vibrational Dynamics of Hollow Au Nanocages Embedded in Cu2O Shells

We have synthesized hollow Au nanocages embedded within thick porous shells of cuprous oxide (Cu₂O). The shell causes a significant redshift of the localized surface plasmon resonance of Au into the near‐IR. Electron–phonon coupling in the Au nanocage is 3–6 times faster in the core–shell structure due to the higher thermal conductivity of Cu₂O compared to water. Coherent phonon oscillations within the Au lattice are characterized by a breathing mode of the entire structure for both bare and core–shell nanocages, an assignment made through the use of structural mechanics simulations. The experimental frequencies are obtained through simulations by selectively applying a force to the shell of the core–shell structure. We interpret this as rapid thermal expansion of the gold leading to a mechanical force that acts on the shell.     

Effect of Cl− anions on photocatalytic decomposition of gaseous ozone over Au @ Ag/TiO2 catalyst

Au core Ag shell composite structure nanoparticles were prepared using a sol method. The Au core Ag shell composite nanoparticles were loaded on TiO₂ nanoparticles as support using a modified powder–sol method, enabling the generation of Au @ Ag/TiO₂ photocatalysts for photocatalytic decomposition and elimination of ozone. The sols were characterized by means of ultraviolet–visible light (UV–Vis) reflection spectrometry, X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The activity of the Au @ Ag/TiO₂ photocatalysts for photocatalytic decomposition and elimination of ozone was evaluated and the effect of Cl^? anions on the photocatalytic activity of the catalysts was highlighted. Results showed that Au @ Ag/TiO₂ prepared via the modified powder–sol route in the presence of an appropriate amount of NaCl solid as demulsifier had better activity in the photocatalytic decomposition and elimination of ozone. At the same time, Au @ Ag/TiO₂ catalysts had better ability to resist poisonous Cl^? anions than conventional Au/TiO₂ catalyst. The reasons could be, first, that NaCl was capable of reducing the concentration of free Ag⁺ by adsorption on the surface of Ag particles forming AgCl and enhancing the formation of Au core Ag shell particles, leading to a better resistance to Cl^? anions of the catalysts, and, second, AgCl took part in the photocatalytic decomposition of ozone together with Au @ Ag/TiO₂ catalysts and had a synergistic effect on the latter, resulting in better photocatalytic activity of Au @ Ag/TiO₂ catalysts.     

Ptshell–Aucore/C electrocatalyst with a controlled shell thickness and improved Pt utilization for fuel cell reactions

Nanoscale Pt_shell–Au_core/C with a controlled shell thickness was successfully synthesized based on a successive reduction strategy. With a Au core size of 4.8 nm, a complete Pt shell of thickness ∼0.6 nm was formed at Pt/Au mole ratio 1:1. The complete coverage of Au core with Pt shell was suggested by various techniques including TEM, UV–vis and cyclic voltammetry. A higher specific activity compared to conventional Pt/C was demonstrated using the probe reaction of methanol electro-oxidation, proving the improved Pt utilization with this core-shell structure.     

Gold(Core)–Lead(Shell) Nanoparticle‐Loaded Titanium(IV) Oxide Prepared by Underpotential Photodeposition: Plasmonic Water Oxidation

Underpotential photodeposition of Pb yields an ultrathin shell layer on the Au(111) surface of Au nanoparticle(NP)‐loaded TiO₂ (Au/TiO₂) with heteroepitaxial nanojunctions. The localized surface plasmon resonance of Au/TiO₂ undergoes no damping with the Pb‐shell formation, and the Pb shell offers resistance to aerobic oxidation. Mesoporous films comprising the Au(core)–Pb(shell) NP‐loaded TiO₂ and unmodified Au/TiO₂ were formed on fluorine‐doped tin oxide (FTO) electrode. Using them as the photoanode, photoelectrochemical cells were fabricated, and the photocurrent was measured under illumination of simulated sunlight. The photocurrent for water splitting is dramatically enhanced by the Pb‐shell formation. The photoelectrochemical measurements of the hot‐electron lifetime and density functional theory calculations for model clusters indicate that the Pb‐shell effect originates from the charge separation enhancement.     

Continuous Tuning of Au–Cu2O Janus Nanostructures for Efficient Charge Separation

In photocatalysis, the Schottky barrier in metal–semiconductor hybrids is known to promote charge separation, but a core–shell structure always leads to a charge build-up and eventually shuts off the photocurrent. Here, we show that Au–Cu₂O hybrid nanostructures can be continuously tuned, particularly when the Cu₂O domains are single-crystalline. This is in contrast to the conventional systems, where the hybrid configuration is mainly determined by the choice of materials. The distal separation of the Au–Cu₂O domains in Janus nanostructures leads to enhanced charge separation and a large improvement of the photocurrent. The activity of the Au–Cu₂O Janus structures is 5 times higher than that of the core–shell structure, and 10 times higher than that of the neat Cu₂O nanocubes. The continuous structural tuning allows to study the structure–property relationship and an optimization of the photocatalytic performance.     

Ag@Au Core‐Shell Nanowires for Nearly 100 % CO2‐to‐CO Electroreduction

Electrochemical reduction of carbon dioxide (CO₂) to CO is regarded as an efficient method to utilize the greenhouse gas CO₂, because the CO product can be further converted into high value‐added chemicals via the Fisher–Tropsch process. Among all electrocatalysts used for CO₂‐to‐CO reduction, Au‐based catalysts have been demonstrated to possess high selectivity, but their precious price limits their future large‐scale applications. Thus, simultaneously achieving high selectivity and reasonable price is of great importance for the development of Au‐based catalysts. Here, we report Ag@Au core–shell nanowires as electrocatalyst for CO₂ reduction, in which a nanometer‐thick Au film is uniformly deposited on the core Ag nanowire. Importantly, the Ag@Au catalyst with a relative low Au content can drive CO generation with nearly 100 % Faraday efficiency in 0.1 m KCl electrolyte at an overpotential of ca. ?1.0 V. This high selectivity of CO₂ reduction could be attributed to a suitable adsorption strength for the key intermediate on Au film together with the synergistic effects between the Au shell and Ag core and the strong interaction between CO₂ and Cl^? ions in the electrolyte, which may further pave the way for the development of high‐efficiency electrocatalysts for CO₂ reduction.     

Dual Plasmonic Au−Cu2−xS Nanocomposites: Design Strategies and Photothermal Properties

Coupling two different materials to create a hybrid nanostructured system is a powerful strategy for achieving synergistically enhanced properties and advanced functionalities. In the case of Au and Cu_2−xS, their combination on the nanoscale results in dual plasmonic Au−Cu_2−xS nanocomposites that exhibit intense photon absorption in both the visible and the near-infrared spectral ranges. Their strong light-absorbing properties translate to superior photothermal transduction efficiency, making them attractive in photothermal-based applications. There are several nanostructure configurations that are possible for the Au−Cu_2−xS system, and the successful fabrication of a particular architecture often requires a carefully planned synthetic strategy. In this Minireview, the different synthetic approaches that can be employed to produce rationally designed Au−Cu_2−xS nanocomposites are presented, with a focus on the experimental protocols that can lead to heterodimer, core–shell, reverse core–shell, and yolk–shell configurations. The photothermal behavior of these materials is also discussed, providing a glimpse of their potential use as photothermally active agents in therapeutic and theranostic applications.     

“Click” synthesis of thermally stable au nanoparticles with highly grafted polymer shell and control of their behavior in polymer matrix

Thermally stable core–shell gold nanoparticles (Au NPs) with highly grafted polymer shells were synthesized by combining reversible addition‐fragmentation transfer (RAFT) polymerization and click chemistry of copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). First, alkyne‐terminated poly(4‐benzylchloride‐b‐styrene) (alkyne‐PSCl‐b‐PS) was prepared from the alkyne‐terminated RAFT agent. Then, an alkyne‐PSCl‐b‐PS chain was coupled to azide‐functionalized Au NPs via the CuAAC reaction. Careful characterization using FT‐IR, UV–Vis, and TGA showed that PSCl‐b‐PS chains were successfully grafted onto the Au NP surface with high grafting density. Finally, azide groups were introduced to PSCl‐b‐PS chains on the Au NP surface to produce thermally stable Au NPs with crosslinkable polymer shell ( Au‐PSN₃‐b‐PS 1 ). As the control sample, PS‐b‐PSN₃‐coated Au NPs ( Au‐PSN₃‐b‐PS 2 ) were made by the conventional “grafting to” approach. The grafting density of polymer chains on Au‐PSN₃‐b‐PS 1 was found to be much higher than that on Au‐PSN₃‐b‐PS 2 . To demonstrate the importance of having the highly packed polymer shell on the nanoparticles, Au‐PSN₃‐b‐PS 1 particles were added into the PS and PS‐b‐poly(2‐vinylpyridine) matrix, respectively. Consequently, it was found that Au‐PSN₃‐b‐PS 1 nanoparticles were well dispersed in the PS matrix and PS‐b‐P2VP matrix without any aggregation even after annealing at 220 °C for 2 days. Our simple and powerful approach could be easily extended to design other core–shell inorganic nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ionic Liquid Assisted Synthesis of Au–Pd Bimetallic Particles with Enhanced Electrocatalytic Activity

Morphology‐ and composition‐controlled synthesis of Au–Pd bimetallic particles was realized by a facile ionic liquid assisted route at room temperature. The morphologies of the synthesized particles, such as nanoflake‐constructed spheres with a core–shell structure, nanoparticle‐constructed spheres, and nanoparticle‐constructed dendrites, could be well controlled by the present route. The ionic liquid was found to play a key role in the formation of these interesting particles. Moreover, the composition (Au:Pd) of the particles could be modulated by means of the molar ratio of the metal precursors in the feeding solutions. The Au–Pd bimetallic particles exhibit high electrocatalytic activity toward oxidation of ethanol and formic acid. Furthermore, cyclic voltammetric studies on the as‐prepared Au–Pd bimetallic particles revealed good electroactivity for H₂O₂, which results in an effective amperometric H₂O₂ sensor.     

Au108S24(PPh3)16: A Highly Symmetric Nanoscale Gold Cluster Confirms the General Concept of Metalloid Clusters

The reduction of (Ph₃P)AuCl with NaBH₄ in the presence of HSC(SiMe₃)₃, leads to one of the largest metalloid gold clusters: Au₁₀₈S₂₄(PPh₃)₁₆ ( 1 ). Within 1 an octahedral Au₄₄ core of gold atoms arranged as in Au metal is surrounded by 48 oxidized Au atoms of an Au₄₈S₂₄ shell, a novel building block in gold chemistry. The protecting Au₄₈S₂₄ shell is completed by additional 16 Au(PPh₃) units, leading to a complete protection of the gold core. Within 1 the Au–Au distances get more molecular on going from the center to the ligand shell. Cluster 1 represents novel structural motives in the field of metalloid gold clusters which also are partly typical for metal atoms in metalloid clusters: M_n R_m (n >m ).     

Chemically dealloyed Pt–Au–Cu ternary electrocatalysts with enhanced stability in electrochemical oxygen reduction

We report simple synthesis of ternary Pt–Au–Cu catalysts consisting of active Pt-rich shell and Pt transition-metal alloy core for use as highly active and durable electrocatalysts in oxygen reduction reactions. The ternary Pt–Au–Cu catalysts were synthesized by chemical coreduction followed by thermal treatment and chemical dealloying. During synthesis, thermal treatment formed metal particles into high-degree alloys, and chemical dealloying led to selective dissolution of soluble Cu species from the outer surface layer of the thermally treated alloy particles, resulting in Pt-based alloys@Pt-rich surface core–shell configuration. Compared with a commercial Pt/C catalyst, our Pt_1?xAu _x Cu₃/C-AT catalysts exhibited approximately 2.4-fold enhanced performance in oxygen reduction reactions. Among the catalysts employed in this work, Pt_0.97Au_0.3Cu₃/C-AT showed the highest performance in terms of mass activity, specific activity, and electrochemically active surface area loss with negligible change during 10,000 potential cycles. The synthesis details, electrochemical characteristics, oxygen reduction reaction performance, and durability of the chemically dealloyed ternary Pt–Au–Cu catalysts are presented and discussed.     

Double‐Layered Plasmonic–Magnetic Vesicles by Self‐Assembly of Janus Amphiphilic Gold–Iron(II,III) Oxide Nanoparticles

Janus nanoparticles (JNPs) offer unique features, including the precisely controlled distribution of compositions, surface charges, dipole moments, modular and combined functionalities, which enable excellent applications that are unavailable to their symmetrical counterparts. Assemblies of NPs exhibit coupled optical, electronic and magnetic properties that are different from single NPs. Herein, we report a new class of double‐layered plasmonic–magnetic vesicle assembled from Janus amphiphilic Au‐Fe₃O₄ NPs grafted with polymer brushes of different hydrophilicity on Au and Fe₃O₄ surfaces separately. Like liposomes, the vesicle shell is composed of two layers of Au‐Fe₃O₄ NPs in opposite direction, and the orientation of Au or Fe₃O₄ in the shell can be well controlled by exploiting the amphiphilic property of the two types of polymers.     

Facile Hydrogen‐Bond‐Assisted Polymerization and Immobilization Method to Synthesize Hierarchical Fe3O4@Poly(4‐vinylpyridine‐co‐divinylbenzene)@Au Nanostructures and Their Catalytic Applications

Hierarchical Fe₃O₄@poly(4‐vinylpyridine‐co‐divinylbenzene)@Au (Fe₃O₄@P(4‐VP–DVB)@Au) nanostructures were fabricated successfully by means of a facile two‐step synthesis process. In this study, well‐defined core–shell Fe₃O₄@P(4‐VP–DVB) microspheres were first prepared with a simple polymerization method, in which 4‐VP was easily polymerized on the surface of Fe₃O₄ nanoparticles by means of strong hydrogen‐bond interactions between ? COOH groups on poly(acrylic acid)‐modified Fe₃O₄ nanoparticles and a 4‐VP monomer. HAuCl₄ was adsorbed on the chains of a P(4‐VP) shell and then reduced to Au nanoparticles by NaBH₄, which were embedded into the P(4‐VP) shell of the composite microspheres to finally form the Fe₃O₄@P(4‐VP–DVB)@Au nanostructures. The obtained Fe₃O₄@P(4‐VP–DVB)@Au catalysts with different Au loadings were applied in the reduction of 4‐nitrophenol (4‐NP) and exhibited excellent catalytic activity (up to 3025 h^?1 of turnover frequency), facile magnetic separation (up to 31.9 emu g^?1 of specific saturation magnetization), and good durability (over 98 % of conversion of 4‐NP after ten runs of recyclable catalysis and almost negligible leaching of Au).     

Gold‐loading magnetic core–shell organic/inorganic nanocomposites: facile preparation and multiple properties

Magnetic composite nanospheres (MCS) were first prepared via mini‐emulsion polymerization. Subsequently, the hybrid core–shell nanospheres were used as carriers to support gold nanoparticles. The as‐prepared gold‐loading magnetic composite nanospheres (Au‐MCS) had a hydrophobic core embed with γ‐Fe₃O₄ and a hydrophilic shell loaded by gold nanoparticles. Both the content of γ‐Fe₃O₄ and the size of gold nanoparticles could be controlled in our experiments, which resulted in fabricating various materials. On one hand, the Au‐MCS could be used as a T₂ contrast agent with a relaxivity coefficient of 362 mg^?1 ml S^?1 for magnetic resonance imaging. On the other hand, the Au‐MCS exhibited tunable optical‐absorption property over a wavelength range from 530 nm to 800 nm, which attributed to a secondary growth of gold nanoparticles. In addition, dynamic light scattering results of particle sizing and Zeta potential measurements revealed that Au‐MCS had a good stability in an aqueous solution, which would be helpful for further applications. Finally, it showed that the Au‐MCS were efficient catalysts for reductions of hydrophobic nitrobenzene and hydrophilic 4‐nitrophenol that could be reused by a magnetic separation process. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation and Characterization of Polymer‐Protected Pt@Pt/Au Core‐Shell Nanoparticles

Poly(N‐vinyl‐2‐pyrolidone) protected Pt‐core bimetallic Pt/Au‐shell (Pt@Pt/Au) nanoparticles were prepared by multi‐step reduction of HAuCl₄ and H₂PtCl₆ alternately by hydrogen adsorbed on platinum atom. Transmission electronic microscopy (TEM) and x‐ray diffraction (XRD) were used to characterize Pt@Pt/Au nanoparticles. The structure of the shell of the nanoparticles seems to be the Au‐Pt solid solution.     

Effects of the Au(I)–Au(I) closed‐shell attraction on the electronic and phosphorescent properties in a series of coordination compounds: A theoretical study

The Au(I)–Au(I) closed‐shell or aurophilic attraction has been the subject of interest in the experimental and theoretical chemistry fields, due to the intriguing properties associated to it. The presence of phosphorescence in “aurophilic” compounds has been addressed to a wide range of applications, but it has not yet been fully understood. A theoretical study on the electronic and phosphorescent properties of the following series of dinuclear gold complexes has been performed: [Au₂(dmpm) (i‐mnt)] ( 1 ), [Au₂(μ‐Me‐TU) (μ‐dppm)] ( 2 ), and [Au₂(μ‐G)(μ‐dmpe)] ( 3 ). Full geometry optimizations at the second‐order Møller–Plesset perturbation theory (MP2) were carried out for each of the species. These calculations made evident that, at the ground‐state geometry, the Au(I) cations allocated at the center of the ring show a short Au–Au distance below the sum of the van der Waals radii, at the range of the aurophilic attraction. An intermolecular Au(I)–Au(I) closed‐shell attraction for a pair of the systems under study is found. This attraction is comparable to that of the hydrogen bonds. The phosphorescent properties experimentally observed for this series were also characterized through ab initio techniques. The obtained results allow to fit reasonably the excitation energies with the experimental data and to identify a correlation between the strength of the Au(I)–Au(I) interaction and the phosphorescent behavior. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011