Highly Active Cobalt Sulfide/Carbon Nanotube Catalyst for Hydrogen Evolution at Soft Interfaces

Hydrogen evolution at polarized liquid–liquid interfaces [water/1,2‐dichloroethane (DCE)] by the electron donor decamethylferrocene (DMFc) is catalyzed efficiently by the fabricated cobalt sulfide (CoS) nanoparticles and nanocomposites of CoS nanoparticles formed on multi‐walled carbon nanotubes (CoS/CNT). The suspended CoS/CNT nanocomposite catalysts at the interface show a higher catalytic activity for the hydrogen evolution reaction (HER) than the CoS nanoparticles due to the high dispersity and conductivity of the CNT materials, which can serve as the main charge transport pathways for the injection of electrons to attain the catalytic sites of the nanoparticles. The reaction rate increased more than 1000‐fold and 300‐fold by using CoS/CNT and CoS catalysts, respectively, when compared to a non‐catalyzed reaction.     

Pyrolytic Carbon‐coated Cu‐Fe Alloy Nanoparticles with High Catalytic Performance for Oxygen Electroreduction

Well‐dispersed carbon‐coated or nitrogen‐doped carbon‐coated copper‐iron alloy nanoparticles (FeCu@C or FeCu@C?N) in carbon‐based supports are obtained using a bimetallic metal‐organic framework (Cu/Fe‐MOF‐74) or a mixture of Cu/Fe‐MOF‐74 and melamine as sacrificial templates and an active‐component precursor by using a pyrolysis method. The investigation results attest formation of Cu?Fe alloy nanoparticles. The obtained FeCu@C catalyst exhibits a catalytic activity with a half‐wave potential of 0.83 V for oxygen reduction reaction (ORR) in alkaline medium, comparable to that on commercial Pt/C catalyst (0.84 V). The catalytic activity of FeCu@C?N for ORR (E_half‐wave=0.87 V) outshines all reported analogues. The excellent performance of FeCu@C?N should be attributed to a change in the energy of the d‐band center of Cu resulting from the formation of the copper–iron alloy, the interaction between alloy nanoparticles and supports and N‐doping in the carbon matrix. Moreover, FeCu@C and FeCu@C?N show better electrochemical stability and methanol tolerance than commercial Pt/C and are expected to be widely used in practical applications.     

Key Non‐Metal Ingredients for Cu‐catalyzed “Click” Reactions in Glycerol: Nanoparticles as Efficient Forwarders

The effect of long‐alkyl‐chain amines in CuI‐assisted azide–alkyne cycloadditions of terminal alkynes with organic azides in glycerol and other environmentally benign solvents (water, ethanol) has been examined. The presence of these additives favors the in situ formation of Cu^I‐based nanoparticles and results in an increase of the catalytic reactivity. In glycerol, liquid‐phase transmission electron microscopy (TEM) analyses, enabled by the negligible vapor pressure of this solvent, proved that Cu^I nanoparticles are responsible for the observed catalytic activity. The wide variety of alkynes and azides of which this effect has been investigated (14 combinations) confirms the role played by these additives in Cu‐catalyzed Huisgen cycloadditions.     

Electrostatic‐Driven Dynamic Jamming of 2D Nanoparticles at Interfaces for Controlled Molecular Diffusion

Dynamically engineering the interfacial interaction of nanoparticles has emerged as a new approach for bottom‐up fabrication of smart systems to tailor molecular diffusion and controlled release. Janus zwitterionic nanoplates are reported that can be switched between a locked and unlocked state at interfaces upon changing surface charge, allowing manipulation of interfacial properties in a fast, flexible, and switchable manner. Combining experimental and modeling studies, an unambiguous correlation is established among the electrostatic energy, the interface geometry, and the interfacial jamming states. As a proof‐of‐concept, the well‐controlled interfacial jamming of nanoplates enabled the switchable molecular diffusion through liquid–liquid interfaces, confirming the feasibility of using nanoparticle‐based surfactants for advanced controlled release.     

Single Fusion Events at Polarized Liquid–Liquid Interfaces

A new electrochemical framework for tracking individual soft particles in solution and monitoring their fusion with polarized liquid–liquid interfaces is reported. The physicochemical principle lies in the interfacial transfer of an ionic probe confined in the particles dispersed in solution and that is released upon their collision and fusion with the fluid interface. As a proof‐of‐concept, spike‐like transients of a stochastic nature are reported in the current–time response of 1,2‐dichloroethane(DCE)|water(W) submilli‐interfaces after injection of DCE‐in‐W emulsions. The sign and potential dependence of the spikes reflect the charge and lipophilicity of the ionic load of the droplets. A comparison with dynamic light scattering measurements indicates that each spike is associated with the collision of a single sub‐picoliter droplet. This opens a new framework for the study of single fusion events at the micro‐ and nanoscale and of ion transport across biomimetic soft interfaces.     

Pd‐Cu alloy nanoparticle supported on amine‐terminated ionic liquid functional 3D graphene and its application on Suzuki cross‐coupling reaction

Well distributed Pd‐Cu bimetallic alloy nanoparticles supported on amine‐terminated ionic liquid functional three‐dimensional graphene (3D IL‐rGO/Pd‐Cu) as an efficient catalyst for Suzuki cross‐coupling reaction has been prepared via a facile synthetic method. The introduction of IL‐NH₂ cations on the surface of graphene sheets can effectively avoid the re‐deposition of graphene sheets, allowing the catalyst to be reused up to 10 cycles. The addition of Cu not only saves cost but also ensures high catalytic efficiency. It is worthy to note that the catalyst 3D IL‐rGO/Pd_2.5Cu_2.5 can efficiently catalyze the Suzuki cross‐coupling reaction with the yield up to 100% in 0.25 h, almost one‐fold higher than that by the pristine IL‐rGO/Pd_2.5 catalyst (52%). The Powder X‐Ray Diffraction (XRD), combining energy dispersive X‐ray spectroscopy (EDS) mapping results confirm the existence and distribution of Pd and Cu in the bimetallic nanoparticles. The transmission electron microscopy (TEM) reveals the nanoparticle size with an average diameter of 3.0 ± 0.5 nm. X‐ray photoelectron spectroscopy (XPS) analysis proved the presence of electron transfer from Cu to Pd upon alloying. Such alloying‐induced electronic modification of Pd‐Cu alloy and 3D ionic liquid functional graphene with large specific surface area both accounted for the catalytic enhancement.     

Preparation and characterization of copper nanoparticles surface‐capped by alkanethiols

Cu nanoparticles surface‐capped by alkanethiols were synthesized using ligand exchange method in a two‐phase system. The effects of synthetic conditions, including the pH value of CuSO₄ solution, the ratio of cetyltrimethyl ammonium bromide to CuSO₄, and reaction temperature, on the size and shape of as‐synthesized Cu nanoparticles were investigated. As‐synthesized Cu nanoparticles surface‐capped by alkanethiols with different chain lengths (C_xS‐Cu) were characterized by means of X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectrometry, and ultraviolet–visible light spectrometry. The tribological behavior of C_xS‐Cu as an additive in liquid paraffin was evaluated with a four‐ball machine. Results indicate that cetyltrimethyl ammonium bromide plays an important role in controlling the dispersion of Cu nanoparticles before adding modifier octanethiol into the reaction solution. C_xS‐Cu nanoparticles as additive in liquid paraffin possess excellent antiwear and friction‐reduction performance because of the deposition of nano‐Cu with low melting point on worn steel surface leading to the formation of a self‐repairing protective layer thereon. Copyright © 2013 John Wiley & Sons, Ltd.     

Copper nanoparticles seeded functionalized‐PVC plastic surface for electroless nickel deposition

A novel and facile activation process for electroless nickel deposition was developed. The semi‐interpenetrating polymer network hydrogel biofilm was used to functionalize the inert poly(vinyl chloride) (PVC) surface, and then Cu nanoparticles, which can initial the subsequent electroless nickel deposition successfully seeded on the functionalized‐PVC surface. The samples were characterized by scanning electron microscopy, X‐ray photoelectron spectroscopy, X‐ray diffraction, and transmission electron microscopy. The results show that the hydrogel film provided the PVC surface with amino groups and Cu nanoparticles of 20–50 nm in size could be functioned as the catalytic nuclei for the subsequent electroless metal deposition on PVC plastic. It can be concluded that the novel Cu activation was effective for the nickel deposition on PVC surface, because of more chemisorption sites for Cu nanoparticles generated on PVC surface. Copyright © 2013 John Wiley & Sons, Ltd.     

Cu–S‐(propyl)‐2‐aminobenzothioate on magnetic nanoparticles: highly efficient and reusable catalyst for synthesis of polyhydroquinoline derivatives and oxidation of sulfides

Cu–S‐(propyl)‐2‐aminobenzothioate supported on functionalized Fe₃O₄ magnetic nanoparticles is reported as a reusable and highly efficient nanocatalyst for the one‐pot synthesis of polyhydroquinoline derivatives and also for selective oxidation of sulfides to sulfoxides. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, inductively coupled plasma atomic emission spectroscopy and atomic absorption spectroscopy. The nanocatalyst was easily recovered using an external magnet and reused several times without significant loss of its catalytic efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

The composite catalysts of Cu/CuxO nanoparticles supported on the carbon fibers were prepared for styrene oxidation reaction

In this paper a novel simple method for preparing two different catalysts with various‐valences copper was reported. Carbon nanofibers supported copper‐cuprous oxide nanoparticles (Cu‐Cu₂O NPs/CNFs) and copper oxide nanoparticles (CuO NPs/CNFs) through electrospinning, adsorption and reduction in the high‐pressure hydrogenation and the high‐temperature calcination methods. These catalysts were investigated by a series of characterizations and were applied in reaction in nitrogen atmosphere, which had a good catalytic activity and selectivity of benzaldehyde for the reaction. Above all, the new study has been certified clearly, in which Cu‐Cu₂O NPs/CNFs and CuO NPs/CNFs composite catalysts enhanced the generation of benzaldehydeand the excellent catalytic properties were exhibited.     

Shape‐Controlled Growth of Carbon Nanostructures: Yield and Mechanism

Carbon nanostructures with precisely controlled shapes are difficult materials to synthesize. A facet‐selective‐catalytic process was thus proposed to synthesize polymer‐linked carbon nanostructures with different shapes, covering straight carbon nanofiber, carbon nano Y‐junction, carbon nano‐hexapus, and carbon nano‐octopus. A thermal chemical vapor deposition process was applied to grow these multi‐branched carbon nanostructures at temperatures lower than 350 °C. Cu nanoparticles were utilized as the catalyst and acetylene as the reaction gas. The growth of those multi‐branched nanostructures was realized through the selective growth of polymer‐like sheets on certain indexed facets of Cu catalyst. The vapor–facet–solid (VFS) mechanism, a new growth mode, has been proposed to interpret such a growth in the steps of formation, diffusion, and coupling of carbon‐containing oligomers, as well as their final precipitation to form nanostructures on the selective Cu facets.     

Platinum–Copper Nanoframes: One‐Pot Synthesis and Enhanced Electrocatalytic Activity

Platinum–copper nanoframes were produced from copper nanoparticles by a one‐pot synthesis method. The growth mechanism was thoroughly studied by experiment and theoretical calculations. Owing to the unique structure, Pt‐Cu nanoframes exhibited significantly enhanced catalytic activity toward the electro‐oxidation of methanol compared to commercial Pt black.     

One‐pot green synthesis of Cu/bone nanocomposite and its catalytic activity in the synthesis of 1‐substituted 1H‐1,2,3,4‐tetrazoles and reduction of hazardous pollutants

In this work, a simple and green method is reported for the biosynthesis of Cu/bone nanocomposite using Cordyline fruticosa extract as a stabilizer and reductant. Animal bone was used as a natural support to prevent the accumulation of Cu nanoparticles. The catalytic activity of Cu/bone nanocomposite was assessed in the synthesis of 1‐substituted 1H‐1,2,3,4‐tetrazoles and reduction of various organic dyes, including 4‐nitrophenol (4‐NP), nigrosin (NS), congo red (CR) and methylene blue (MB). The best catalytic performance in the synthesis of 1‐substituted tetrazoles was achieved using 0.05 g of Cu/bone nanocomposite at 120°C. In addition, under optimal conditions, the absorption bands corresponding to 4‐NP, CR, NS and MB completely disappeared after about 6 min, 3 min, 50 s and 7 s, respectively. The biosynthesis protocol used in the preparation of Cu/bone nanocomposite offers a very attractive area for further research.     

A Case of Strong Metal–Support Interactions: Combining Advanced Microscopy and Model Systems to Elucidate the Atomic Structure of Interfaces

A symbiosis of advanced scanning probe and electron microscopy and a well‐defined model system may provide a detailed picture of interfaces on nanostructured catalytic systems. This was demonstrated for Pt nanoparticles supported on iron oxide thin films which undergo encapsulation by supporting oxide as a result of strong metal–support interactions.     

Copper immobilized on magnetite nanoparticles coated with ascorbic acid: An efficient and reusable catalyst for C─N and C─O cross‐coupling reactions

In a continuation of using magnetic nanoparticle (MNP)‐supported catalysts, ascorbic acid (readily available, very safe and with strong affinity to MNPs) was used instead of the commonly used silica layer coating. This hybrid was used for immobilizing copper nanoparticles to produce Cu/ascorbic acid@MNPs catalyst. The catalyst was characterized and used in carbon–oxygen and carbon–nitrogen (various substrates) cross‐coupling reactions in aqueous media and at room temperature with excellent product yields. Furthermore, the catalyst could be quickly and completely recovered using an external magnetic field and reused for six reaction cycles without significant change in catalytic activity.     

Polarity Control at Interfaces: Quantifying Pseudo‐solvent Effects in Nano‐confined Systems

Surface functionalization controls local environments and induces solvent‐like effects at liquid–solid interfaces. We explored structure–property relationships between organic groups bound to pore surfaces of mesoporous silica nanoparticles and Stokes shifts of the adsorbed solvatochromic dye Prodan. Correlating shifts of the dye on the surfaces with its shifts in solvents resulted in a local polarity scale for functionalized pores. The scale was validated by studying the effects of pore polarity on quenching of Nile Red fluorescence and on the vibronic band structure of pyrene. Measurements were done in aqueous suspensions of porous particles, proving that the dielectric properties in the pores are different from the bulk solvent. The precise control of pore polarity was used to enhance the catalytic activity of TEMPO in the aerobic oxidation of furfuryl alcohol in water. An inverse relationship was found between pore polarity and activity of TEMPO in the pores, demonstrating that controlling the local polarity around an active site allows modulating the activity of nanoconfined catalysts.     

Cu‐Based Nanoparticles as Emerging Environmental Catalysts

This account provides an overview of current research activities on nanoparticles containing the earth‐abundant and inexpensive element copper (Cu) and Cu‐based nanoparticles, especially in the field of environmental catalysis. The different synthetic strategies with possible modification of the chemical/ physical properties of these nanoparticles using such strategies and/or conditions to improve catalytic activity are presented. The design and development of support and/or bimetallic systems (e. g., alloys, intermetallic, etc.) are also included. Herein, we report synthetic approaches of Cu and Cu‐based nanoparticles (monometallic copper, bimetallic copper and copper (II) oxide nanoparticles/nanostructures) and impregnation of such nanoparticles onto support material (e. g., Co₃O₄ nanostructure), along with their applications as environmental catalyst for various oxidation and reduction reactions. Finally, this account provides necessary advances and perspectives of Cu‐based nanoparticles in the environmental catalysis.     

Supported Pd–Cu Bimetallic Nanoparticles That Have High Activity for the Electrochemical Oxidation of Methanol

Monodisperse bimetallic Pd–Cu nanoparticles with controllable size and composition were synthesized by a one‐step multiphase ethylene glycol (EG) method. Adjusting the stoichiometric ratio of the Pd and Cu precursors afforded nanoparticles with different compositions, such as Pd₈₅–Cu₁₅, Pd₅₆–Cu₄₄, and Pd₃₉–Cu₆₁. The nanoparticles were separated from the solution mixture by extraction with non‐polar solvents, such as n‐hexane. Monodisperse bimetallic Pd–Cu nanoparticles with narrow size‐distribution were obtained without the need for a size‐selection process. Capping ligands that were bound to the surface of the particles were removed through heat treatment when the as‐prepared nanoparticles were loaded onto a Vulcan XC‐72 carbon support. Supported bimetallic Pd–Cu nanoparticles showed enhanced electrocatalytic activity towards methanol oxidation compared with supported Pd nanoparticles that were fabricated according to the same EG method. For a bimetallic Pd–Cu catalyst that contained 15 % Cu, the activity was even comparable to the state‐of‐the‐art commercially available Pt/C catalysts. A STEM‐HAADF study indicated that the formation of random solid‐solution alloy structures in the bimetallic Pd₈₅–Cu₁₅/C catalysts played a key role in improving the electrochemical activity.     

Palladium magnetic nanoparticle‐polyethersulfone composite membrane as an efficient and versatile catalytic membrane reactor

Developing polymer catalytic membrane reactors is an aim due to its outstanding advantages. In this paper, a novel catalytic membrane containing palladium‐supported magnetic nanoparticles is introduced. Silica‐iron oxide core shell nanoparticles were first prepared and functionalized by phosphine ionic liquid functionalized poly(ethylene glycol). The modified magnetic nanoparticles were used as support for immobilization of palladium. The final palladium‐immobilized nanoparticles were used as active filler for the preparation of membrane reactor. The prepared membranes were characterized, and their activities were tested in carbon‐carbon bond formation and catalytic reduction. The catalytic membrane showed good performance in the mentioned reactions.     

Coordination‐Directed Growth of Transition‐Metal–Crystalline‐Carbon Composites with Controllable Metal Composition

Transition‐metal–carbon (CTM) composites show ample activity in many catalytic reactions. However, control of composition, distribution, and properties is challenging. Now, a straightforward path for the synthesis of transition‐metal nanoparticles engulfed in crystalline carbon is presented with excellent control over the metal composition, amount, ratio, and catalytic properties. This approach uses molten monomers that coordinate metals ions at high temperature. At high temperatures, strong coordination bonds direct the growth of carbon material with homogeneous metals distribution and with negligible losses, owing to the liquid‐like reaction compared to the traditional solid‐state reaction. The strength of the approach is demonstrated by the synthesis of mono, binary, and trinary transition‐metal–crystalline‐carbon composites with tunable and precise elemental composition as well as good electrochemical properties as oxygen evolution reaction electrocatalysts.