MoS2 Nanoflowers with Expanded Interlayers as High‐Performance Anodes for Sodium‐Ion Batteries

MoS₂ nanoflowers with expanded interlayer spacing of the (002) plane were synthesized and used as high‐performance anode in Na‐ion batteries. By controlling the cut‐off voltage to the range of 0.4–3 V, an intercalation mechanism rather than a conversion reaction is taking place. The MoS₂ nanoflower electrode shows high discharge capacities of 350 mAh g^?1 at 0.05 A g^?1, 300 mAh g^?1 at 1 A g^?1, and 195 mAh g^?1 at 10 A g^?1. An initial capacity increase with cycling is caused by peeling off MoS₂ layers, which produces more active sites for Na⁺ storage. The stripping of MoS₂ layers occurring in charge/discharge cycling contributes to the enhanced kinetics and low energy barrier for the intercalation of Na⁺ ions. The electrochemical reaction is mainly controlled by the capacitive process, which facilitates the high‐rate capability. Therefore, MoS₂ nanoflowers with expanded interlayers hold promise for rechargeable Na‐ion batteries.     

High‐Performance Sodium‐Ion Batteries and Sodium‐Ion Pseudocapacitors Based on MoS2/Graphene Composites

Sodium‐ion energy storage, including sodium‐ion batteries (NIBs) and electrochemical capacitive storage (NICs), is considered as a promising alternative to lithium‐ion energy storage. It is an intriguing prospect, especially for large‐scale applications, owing to its low cost and abundance. MoS₂ sodiation/desodiation with Na ions is based on the conversion reaction, which is not only able to deliver higher capacity than the intercalation reaction, but can also be applied in capacitive storage owing to its typically sloping charge/discharge curves. Here, NIBs and NICs based on a graphene composite (MoS₂/G) were constructed. The enlarged d‐spacing, a contribution of the graphene matrix, and the unique properties of the MoS₂/G substantially optimize Na storage behavior, by accommodating large volume changes and facilitating fast ion diffusion. MoS₂/G exhibits a stable capacity of approximately 350 mAh g^?1 over 200 cycles at 0.25 C in half cells, and delivers a capacitance of 50 F g^?1 over 2000 cycles at 1.5 C in pseudocapacitors with a wide voltage window of 0.1–2.5 V.     

Ultrathin MoS2 Nanosheets Supported on N‐doped Carbon Nanoboxes with Enhanced Lithium Storage and Electrocatalytic Properties

Molybdenum disulfide (MoS₂) has received considerable interest for electrochemical energy storage and conversion. In this work, we have designed and synthesized a unique hybrid hollow structure by growing ultrathin MoS₂ nanosheets on N‐doped carbon shells (denoted as C@MoS₂ nanoboxes). The N‐doped carbon shells can greatly improve the conductivity of the hybrid structure and effectively prevent the aggregation of MoS₂ nanosheets. The ultrathin MoS₂ nanosheets could provide more active sites for electrochemical reactions. When evaluated as an anode material for lithium‐ion batteries, these C@MoS₂ nanoboxes show high specific capacity of around 1000 mAh g^?1, excellent cycling stability up to 200 cycles, and superior rate performance. Moreover, they also show enhanced electrocatalytic activity for the electrochemical hydrogen evolution.     

Mesoporous Carbon Nanofibers Embedded with MoS2 Nanocrystals for Extraordinary Li‐Ion Storage

MoS₂ nanocrystals embedded in mesoporous carbon nanofibers are synthesized through an electrospinning process followed by calcination. The resultant nanofibers are 100–150 nm in diameter and constructed from MoS₂ nanocrystals with a lateral diameter of around 7 nm with specific surface areas of 135.9 m² g^?1. The MoS₂@C nanofibers are treated at 450 °C in H₂ and comparison samples annealed at 800 °C in N₂. The heat treatments are designed to achieve good crystallinity and desired mesoporous microstructure, resulting in enhanced electrochemical performance. The small amount of oxygen in the nanofibers annealed in H₂ contributes to obtaining a lower internal resistance, and thus, improving the conductivity. The results show that the nanofibers obtained at 450 °C in H₂ deliver an extraordinary capacity of 1022 mA h g^?1 and improved cyclic stability, with only 2.3 % capacity loss after 165 cycles at a current density of 100 mA g^?1, as well as an outstanding rate capability. The greatly improved kinetics and cycling stability of the mesoporous MoS₂@C nanofibers can be attributed to the crosslinked conductive carbon nanofibers, the large specific surface area, the good crystallinity of MoS₂, and the robust mesoporous microstructure. The resulting nanofiber electrodes, with short mass‐ and charge‐transport pathways, improved electrical conductivity, and large contact area exposed to electrolyte, permitting fast diffusional flux of Li ions, explains the improved kinetics of the interfacial charge‐transfer reaction and the diffusivity of the MoS₂@C mesoporous nanofibers. It is believed that the integration of MoS₂ nanocrystals and mesoporous carbon nanofibers may have a synergistic effect, giving a promising anode, and widening the applicability range into high performance and mass production in the Li‐ion battery market.     

Covalent Assembly of MoS2 Nanosheets with SnS Nanodots as Linkages for Lithium/Sodium‐Ion Batteries

Weak van der Waals interactions between interlayers of two‐dimensional layered materials result in disabled across‐interlayer electron transfer and poor layered structural stability, seriously deteriorating their performance in energy applications. Herein, we propose a novel covalent assembly strategy for MoS₂ nanosheets to realize unique MoS₂/SnS hollow superassemblies (HSs) by using SnS nanodots as covalent linkages. The covalent assembly based on all‐inorganic and carbon‐free concept enables effective across‐interlayer electron transfer, facilitated ion diffusion kinetics, and outstanding mechanical stability, which are evidenced by experimental characterization, DFT calculations, and mechanical simulations. Consequently, the MoS₂/SnS HSs exhibit superb rate performance and long cycling stability in lithium‐ion batteries, representing the best comprehensive performance in carbon‐free MoS₂‐based anodes to date. Moreover, the MoS₂/SnS HSs also show excellent sodium storage performance in sodium‐ion batteries.     

Recent Advances in Aerosol‐Assisted Spray Processes for the Design and Fabrication of Nanostructured Metal Chalcogenides for Sodium‐Ion Batteries

Increasing demand for sodium‐ion batteries (SIBs), one of the most feasible alternatives to lithium ion batteries (LIBs), has resulted because of their high energy density, low cost, and excellent cycling stability. Consequently, the design and fabrication of suitable electrode materials that govern the overall performance of SIBs are important. Aerosol‐assisted spray processes have gained recent prominence as feasible, scalable, and cost‐effective methods for preparing electrode materials. Herein, recent advances in aerosol‐assisted spray processes for the fabrication of nanostructured metal chalcogenides (e.g., metal sulfides, selenides, and tellurides) for SIBs, with a focus on improving the electrochemical performance of metal chalcogenides, are summarized. Finally, the improvements, limitations, and direction of future research into aerosol‐assisted spray processes for the fabrication of various electrode materials are presented.     

WS2 Nanowires as a High‐Performance Anode for Sodium‐Ion Batteries

We report the synthesis and anode application for sodium‐ion batteries (SIBs) of WS₂ nanowires (WS₂ NWs). WS₂ NWs with very thin diameter of ≈25 nm and expanded interlayer spacing of 0.83 nm were prepared by using a facile solvothermal method followed by a heat treatment. The as‐prepared WS₂ NWs were evaluated as anode materials of SIBs in two potential windows of 0.01–2.5 V and 0.5–3 V. WS₂ NWs displayed a remarkable capacity (605.3 mA h g^?1 at 100 mA g^?1) but with irreversible conversion reaction in the potential window of 0.01–2.5 V. In comparison, WS₂ NWs showed a reversible intercalation mechanism in the potential window of 0.5–3 V, in which the nanowire‐framework is well maintained. In the latter case, the interlayers of WS₂ are gradually expanded and exfoliated during repeated charge–discharge cycling. This not only provides more active sites and open channels for the intercalation of Na⁺ but also facilitates the electronic and ionic diffusion. Therefore, WS₂ NWs exhibited an ultra‐long cycle life with high capacity and rate capability in the potential window of 0.5–3 V. This study shows that WS₂ NWs are promising as the anode materials of room‐temperature SIBs.     

Hierarchical MoS2 Shells Supported on Carbon Spheres for Highly Reversible Lithium Storage

Hierarchical MoS₂ shells supported on carbon spheres (denoted as C@MoS₂) have been synthesized through a one‐step hydrothermal method. The obtained hierarchical C@MoS₂ microspheres simultaneously integrate the structural and compositional design rationales for high‐energy electrode materials based on two‐dimensional (2D) nanosheets. When evaluated as an anode material for lithium‐ion batteries (LIBs), the hierarchical C@MoS₂ microspheres manifest high specific capacity, enhanced cycling stability and good rate capability.     

An Ultrastable Anode for Long‐Life Room‐Temperature Sodium‐Ion Batteries

Sodium‐ion batteries are important alternative energy storage devices that have recently come again into focus for the development of large‐scale energy storage devices because sodium is an abundant and low‐cost material. However, the development of electrode materials with long‐term stability has remained a great challenge. A novel negative‐electrode material, a P2‐type layered oxide with the chemical composition Na_2/3Co_1/3Ti_2/3O₂, exhibits outstanding cycle stability (ca. 84.84 % capacity retention for 3000 cycles, very small decrease in the volume (0.046 %) after 500 cycles), good rate capability (ca. 41 % capacity retention at a discharge/charge rate of 10 C), and a usable reversible capacity of about 90 mAh g^?1 with a safe average storage voltage of approximately 0.7 V in the sodium half‐cell. This P2‐type layered oxide is a promising anode material for sodium‐ion batteries with a long cycle life and should greatly promote the development of room‐temperature sodium‐ion batteries.     

MoS2‐on‐MXene Heterostructures as Highly Reversible Anode Materials for Lithium‐Ion Batteries

Two‐dimensional (2D) heterostructured materials, combining the collective advantages of individual building blocks and synergistic properties, have spurred great interest as a new paradigm in materials science. The family of 2D transition‐metal carbides and nitrides, MXenes, has emerged as an attractive platform to construct functional materials with enhanced performance for diverse applications. Here, we synthesized 2D MoS₂‐on‐MXene heterostructures through in situ sulfidation of Mo₂TiC₂T_x MXene. The computational results show that MoS₂‐on‐MXene heterostructures have metallic properties. Moreover, the presence of MXene leads to enhanced Li and Li₂S adsorption during the intercalation and conversion reactions. These characteristics render the as‐prepared MoS₂‐on‐MXene heterostructures stable Li‐ion storage performance. This work paves the way to use MXene to construct 2D heterostructures for energy storage applications.     

SnS2 Nanoplatelet@Graphene Nanocomposites as High‐Capacity Anode Materials for Sodium‐Ion Batteries

Na‐ion batteries have been attracting intensive investigations as a possible alternative to Li‐ion batteries. Herein, we report the synthesis of SnS₂ nanoplatelet@graphene nanocomposites by using a morphology‐controlled hydrothermal method. The as‐prepared SnS₂/graphene nanocomposites present a unique two‐dimensional platelet‐on‐sheet nanoarchitecture, which has been identified by scanning and transmission electron microscopy. When applied as the anode material for Na‐ion batteries, the SnS₂/graphene nanosheets achieved a high reversible specific sodium‐ion storage capacity of 725 mA h g^?1, stable cyclability, and an enhanced high‐rate capability. The improved electrochemical performance for reversible sodium‐ion storage could be ascribed to the synergistic effects of the SnS₂ nanoplatelet/graphene nanosheets as an integrated hybrid nanoarchitecture, in which the graphene nanosheets provide electronic conductivity and cushion for the active SnS₂ nanoplatelets during Na‐ion insertion and extraction processes.     

Nitrogen‐Doped Carbon Embedded MoS2 Microspheres as Advanced Anodes for Lithium‐ and Sodium‐Ion Batteries

Rational design and synthesis of advanced anode materials are extremely important for high‐performance lithium‐ion and sodium‐ion batteries. Herein, a simple one‐step hydrothermal method is developed for fabrication of N‐C@MoS₂ microspheres with the help of polyurethane as carbon and nitrogen sources. The MoS₂ microspheres are composed of MoS₂ nanoflakes, which are wrapped by an N‐doped carbon layer. Owing to its unique structural features, the N‐C@MoS₂ microspheres exhibit greatly enhanced lithium‐ and sodium‐storage performances including a high specific capacity, high rate capability, and excellent capacity retention. Additionally, the developed polyurethane‐assisted hydrothermal method could be useful for the construction of many other high‐capacity metal oxide/sulfide composite electrode materials for energy storage.     

Transition‐Metal Carbodiimides as Molecular Negative Electrode Materials for Lithium‐ and Sodium‐Ion Batteries with Excellent Cycling Properties

We report evidence for the electrochemical activity of transition‐metal carbodiimides versus lithium and sodium. In particular, iron carbodiimide, FeNCN, can be efficiently used as negative electrode material for alkali‐metal‐ion batteries, similar to its oxide analogue FeO. Based on ⁵⁷Fe Mössbauer and infrared spectroscopy (IR) data, the electrochemical reaction mechanism can be explained by the reversible transformation of the Fe?NCN into Li/Na?NCN bonds during discharge and charge. These new electrode materials exhibit higher capacity compared to well‐established negative electrode references such as graphite or hard carbon. Contrary to its oxide analogue, iron carbodiimide does not require heavy treatments (such as nanoscale tailoring, sophisticated textures, or coating) to obtain long cycle life with current density as high as 9 A g^?1 for hundreds of charge–discharge cycles. Similar to the iron compound, several other transition‐metal carbodiimides M_x(NCN)_y with M=Mn, Cr, Zn can cycle successfully versus lithium and sodium. Their electrochemical activity and performance open the way to the design of a novel family of anode materials.     

Sulfur‐Based Electrodes that Function via Multielectron Reactions for Room‐Temperature Sodium‐Ion Storage

Emerging rechargeable sodium‐ion storage systems—sodium‐ion and room‐temperature sodium–sulfur (RT‐NaS) batteries—are gaining extensive research interest as low‐cost options for large‐scale energy‐storage applications. Owing to their abundance, easy accessibility, and unique physical and chemical properties, sulfur‐based materials, in particular metal sulfides (MS_x) and elemental sulfur (S), are currently regarded as promising electrode candidates for Na‐storage technologies with high capacity and excellent redox reversibility based on multielectron conversion reactions. Here, we present current understanding of Na‐storage mechanisms of the S‐based electrode materials. Recent progress and strategies for improving electronic conductivity and tolerating volume variations of the MS_x anodes in Na‐ion batteries are reviewed. In addition, current advances on S cathodes in RT‐NaS batteries are presented. We outline a novel emerging concept of integrating MS_x electrocatalysts into conventional carbonaceous matrices as effective polarized S hosts in RT‐NaS batteries as well. This comprehensive progress report could provide guidance for research toward the development of S‐based materials for the future Na‐storage techniques.     

Single Crystalline Na0.7MnO2 Nanoplates as Cathode Materials for Sodium‐Ion Batteries with Enhanced Performance

Single crystalline rhombus‐shaped Na_0.7MnO₂ nanoplates have been synthesized by a hydrothermal method. TEM and HRTEM analyses revealed that the Na_0.7MnO₂ single crystals predominantly exposed their (100) crystal plane, which is active for Na⁺‐ion insertion and extraction. When applied as cathode materials for sodium‐ion batteries, Na_0.7MnO₂ nanoplates exhibited a high reversible capacity of 163 mA h g^?1, a satisfactory cyclability, and a high rate performance. The enhanced electrochemical performance could be ascribed to the predominantly exposed active (100) facet, which could facilitate fast Na⁺‐ion insertion/extraction during the discharge and charge process.     

Hierarchical MoS2@Carbon Microspheres as Advanced Anodes for Li‐Ion Batteries

Hierarchical hybridized nanocomposites with rationally constructed compositions and structures have been considered key for achieving superior Li‐ion battery performance owing to their enhanced properties, such as fast lithium ion diffusion, good collection and transport of electrons, and a buffer zone for relieving the large volume variations during cycling processes. Hierarchical MoS₂@carbon microspheres (HMCM) have been synthesized in a facile hydrothermal treatment. The structure analyses reveal that ultrathin MoS₂ nanoflakes (ca. 2–5 nm) are vertically supported on the surface of carbon nanospheres. The reversible capacity of the HMCM nanocomposite is maintained at 650 mA h g^?1 after 300 cycles at 1 A g^?1. Furthermore, the capacity can reach 477 mA h g^?1 even at a high current density of 4 A g^?1. The outstanding electrochemical performance of HMCM is attributed to the synergetic effect between the carbon spheres and the ultrathin MoS₂ nanoflakes. Additionally, the carbon matrix can supply conductive networks and prevent the aggregation of layered MoS₂ during the charge/discharge process; and ultrathin MoS₂ nanoflakes with enlarged surface areas, which can guarantee the flow of the electrolyte, provide more active sites and reduce the diffusion energy barrier of Li⁺ ions.     

Double‐Helix Structure in Carrageenan–Metal Hydrogels: A General Approach to Porous Metal Sulfides/Carbon Aerogels with Excellent Sodium‐Ion Storage

The metal sulfide‐carbon nanocomposite is a new class of anode material for sodium ion batteries, but its development is restricted by its relative poor rate ability and cyclic stability. Herein, we report the use of double‐helix structure of carrageenan–metal hydrogels for the synthesis of 3D metal sulfide (M_xS_y) nanostructure/carbon aerogels (CAs) for high‐performance sodium‐ion storage. The method is unique, and can be used to make multiple M_xS_y/CAs (such as FeS/CA, Co₉S₈/CA, Ni₃S₄/CA, CuS/CA, ZnS/CA, and CdS/CA) with ultra‐small nanoparticles and hierarchical porous structure by pyrolyzing the carrageenan–metal hydrogels. The as‐prepared FeS/CA exhibits a high reversible capacity and excellent cycling stability (280 mA h^?1 at 0.5 A g^?1 over 200 cycles) and rate performance (222 mA h^?1 at 5 A g^?1) when used as the anode material for sodium‐ion batteries. The work shows the value of biomass‐derived metal sulfide–carbon heterostuctures in sodium‐ion storage.     

Coordination‐Driven Hierarchical Assembly of Silver Nanoparticles on MoS2 Nanosheets for Improved Lithium Storage

We report a novel strategy for the hierarchical assembly of Ag nanoparticles (NPs) on MoS₂ nanosheets through coordination by using a multifunctional organic ligand. The presence of Ag NPs on the surface of MoS₂ nanosheets inhibits their agglomeration, thereby providing increased interlayer spacing for easy Li⁺ ion intercalation. Such a unique hybrid architecture also ensures sufficient percolation pathways on the whole surface of the MoS₂ nanosheets. Moreover, the high rigidity and low deformability of the Ag NPs effectively preserve the hybrid architecture during the charge–discharge process, which translates into a high cycle stability. A prominent synergistic effect between MoS₂ and Ag is witnessed. When the Ag content is only 5 wt %, the Ag–MoS₂ hybrid delivers a reversible capacity as high as 920 mA h g^?1 at a current density of 100 mA g^?1, making the Ag–MoS₂ hybrid an attractive candidate for next‐generation LIBs.     

Mesoporous Prussian Blue Analogues: Template‐Free Synthesis and Sodium‐Ion Battery Applications

The synthesis of mesoporous Prussian blue analogues through a template‐free methodology and the application of these mesoporous materials as high‐performance cathode materials in sodium‐ion batteries is presented. Crystalline mesostructures were produced through a synergistically coupled nanocrystal formation and aggregation mechanism. As cathodes for sodium‐ion batteries, the Prussian blue analogues all show a reversible capacity of 65 mA h g^?1 at low current rate and show excellent cycle stability. The reported method stands as an environmentally friendly and low‐cost alternative to hard or soft templating for the fabrication of mesoporous materials.