Palladium‐Catalyzed Decarboxylative Cycloaddition of Vinylethylene Carbonates with Formaldehyde: Enantioselective Construction of Tertiary Vinylglycols

An efficient method for the enantioselective construction of tertiary vinylglycols through a palladium‐catalyzed asymmetric decarboxylative cycloaddition of vinylethylene carbonates with formaldehyde was developed. By using a palladium complex generated in situ from [Pd₂(dba)₃]?CHCl₃ and a phosphoramidite ligand as a catalyst under mild reaction conditions, the process allows conversion of racemic 4‐substituted 4‐vinyl‐1,3‐dioxolan‐2‐ones into the corresponding 1,3‐dioxolanes, as methylene acetal protected tertiary vinylglycols, in high yields with good to excellent enantioselectivities.     

Palladium‐Catalyzed [3+3] Annulation between Diarylamines and α,β‐Unsaturated Acids through CH Activation: Direct Access to 4‐Substituted 2‐Quinolinones

A C?H activation strategy has been successfully employed for the high‐yielding synthesis of a diverse array of 4‐substituted 2‐quinolinone species by a palladium‐catalyzed dehydrogenative coupling involving diarylamines. This intermolecular annulation approach incorporates readily available α,β‐unsaturated carboxylic acids as the coupling partner by suppressing the facile decarboxylation. Based on preliminary mechanistic studies, a reaction sequence is proposed, involving ortho palladation, π‐coordination, β‐migratory insertion, and β‐hydride elimination.     

Synthesis and Self‐Organization of Zinc β‐(Dialkoxyphosphoryl)porphyrins in the Solid State and in Solution

The first synthesis and self‐organization of zinc β‐phosphorylporphyrins in the solid state and in solution are reported. β‐Dialkoxyphosphoryl‐5,10,15,20‐tetraphenylporphyrins and their Zn^II complexes have been synthesized in good yields by using Pd‐ and Cu‐mediated carbon–phosphorous bond‐forming reactions. The Cu‐mediated reaction allowed to prepare the mono‐β‐(dialkoxyphosphoryl)porphyrins 1 Zn – 3 Zn starting from the β‐bromo‐substituted zinc porphyrinate ZnTPPBr (TPP=tetraphenylporphyrin) and dialkyl phosphites HP(O)(OR)₂ (R=Et, iPr, nBu). The derivatives 1 Zn – 3 Zn were obtained in good yields by using one to three equivalents of CuI. When the reaction was carried out in the presence of catalytic amounts of palladium complexes in toluene, the desired zinc derivative 1 Zn was obtained in up to 72 % yield. The use of a Pd‐catalyzed C? P bond‐forming reaction was further extended to the synthesis of β‐poly(dialkoxyphosphoryl)porphyrins. An unprecedented one‐pot sequence involving consecutive reduction and phosphorylation of H₂TPPBr₄ led to the formation of a mixture of the 2,12‐ and 2,13‐bis(dialkoxy)phosphorylporphyrins 5 H₂ and 6 H₂ in 81 % total yield. According to the X‐ray diffraction studies, 1 Zn and 3 Zn are partially overlapped cofacial dimers formed through the coordination of two Zn centers by two phosphoryl groups belonging to the adjacent molecules. The equilibrium between the monomeric and the dimeric species exists in solutions of 1 Zn and 3 Zn in weakly polar solvents according to spectroscopic data (UV/Vis absorption and NMR spectroscopy). The ratio of each form is dependent on the concentration, temperature, and traces of water or methanol. These features demonstrated that zinc β‐phosphorylporphyrins can be regarded as new model compounds for the weakly coupled chlorophyll pair in the photosynthesis process.     

Pd‐Catalyzed Carbonylative α‐Arylation of Aryl Bromides: Scope and Mechanistic Studies

Reaction conditions for the three‐component synthesis of aryl 1,3‐diketones are reported applying the palladium‐catalyzed carbonylative α‐arylation of ketones with aryl bromides. The optimal conditions were found by using a catalytic system derived from [Pd(dba)₂] (dba=dibenzylideneacetone) as the palladium source and 1,3‐bis(diphenylphosphino)propane (DPPP) as the bidentate ligand. These transformations were run in the two‐chamber reactor, COware, applying only 1.5 equivalents of carbon monoxide generated from the CO‐releasing compound, 9‐methylfluorene‐9‐carbonyl chloride (COgen). The methodology proved adaptable to a wide variety of aryl and heteroaryl bromides leading to a diverse range of aryl 1,3‐diketones. A mechanistic investigation of this transformation relying on ³¹P and ¹³C NMR spectroscopy was undertaken to determine the possible catalytic pathway. Our results revealed that the combination of [Pd(dba)₂] and DPPP was only reactive towards 4‐bromoanisole in the presence of the sodium enolate of propiophenone suggesting that a [Pd(dppp)(enolate)] anion was initially generated before the oxidative‐addition step. Subsequent CO insertion into an [Pd(Ar)(dppp)(enolate)] species provided the 1,3‐diketone. These results indicate that a catalytic cycle, different from the classical carbonylation mechanism proposed by Heck, is operating. To investigate the effect of the dba ligand, the Pd⁰ precursor, [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)], was examined. In the presence of DPPP, and in contrast to [Pd(dba)₂], its oxidative addition with 4‐bromoanisole occurred smoothly providing the [PdBr(Ar)(dppp)] complex. After treatment with CO, the acyl complex [Pd(CO)Br(Ar)(dppp)] was generated, however, its treatment with the sodium enolate led exclusively to the acylated enol in high yield. Nevertheless, the carbonylative α‐arylation of 4‐bromoanisole with either catalytic or stoichiometric [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)] over a short reaction time, led to the 1,3‐diketone product. Because none of the acylated enol was detected, this implied that a similar mechanistic pathway is operating as that observed for the same transformation with [Pd(dba)₂] as the Pd source.     

Preparation,structure, and reactivity of 1,3,4,6-tetrakis-(isopropylthio)thieno[3,4-c]thiophene-palladium complex with tetracyanoethylene

The reaction of 1,3,4,6-tetrakis(isopropylthio)thieno[3,4-c]thiophene ( 1 ) with the palladium complex Pd₂(dba)₃CHCl₃ (dba = dibenzylideneacetone) and tetracyanoethylene (TCNE) gave a new palladium complex in which two isopropylthio groups of 1 and the double bond of TCNE were trigonally coordinated to palladium. The X-ray analysis revealed the electron donation from palladium to TCNE, leading to a lengthening of the C?C double bond in TCNE and distortion of TCNE from planarity. The radical cation of 1 and the radical anion of TCNE were detected by ESR spectroscopy in methylene dichloride solution of the complex, although the radical content was estimated from the paramagnetic susceptibility to be less than 1%. The reaction of the complex with aniline gave the same product as that in the reaction of the radical cation of 1 with aniline.     

Kinetic Studies on the Palladium(II)‐Catalyzed Oxidative Cross‐Coupling of Thiophenes with Arylboron Compounds and Their Mechanistic Implications

Reaction orders for the key components in the palladium(II)‐catalyzed oxidative cross‐coupling between phenylboronic acid and ethyl thiophen‐3‐yl acetate were obtained by the method of initial rates. It turned out that the reaction rate not only depended on the concentration of palladium trifluoroacetate (reaction order: 0.97) and phenylboronic acid (reaction order: 1.26), but also on the concentration of the thiophene (reaction order: 0.55) and silver oxide (reaction order: ?1.27). NMR spectroscopy titration studies established the existence of 1:1 complexes between the silver salt and both phenylboronic acid and ethyl thiophen‐3‐yl acetate. A low inverse kinetic isotope effect (k_H/k_D=0.93) was determined upon employing the 4‐deuterated isotopomer of ethyl thiophen‐3‐yl acetate and monitoring its reaction to the 4‐phenyl‐substituted product. A Hammett analysis performed with para‐substituted 2‐phenylthiophenes gave a negative ρ value for oxidative cross‐coupling with phenylboronic acid. Based on the kinetic data and additional evidence, a mechanism is suggested that invokes transfer of the phenyl group from phenylboronic acid to a 1:1 complex of palladium trifluoroacetate and thiophene as the rate‐determining step. Proposals for the structure of relevant intermediates are made and discussed.     

On the mechanism of the palladium-catalyzed β-arylation of ester enolates

The palladium‐catalyzed β‐arylation of ester enolates with aryl bromides was studied both experimentally and computationally. First, the effect of the ligand on the selectivity of the α/β‐arylation reactions of ortho‐ and meta‐fluorobromobenzene was described. Selective β‐arylation was observed for the reaction of o‐fluorobromobenzene with a range of biarylphosphine ligands, whereas α‐arylation was predominantly observed with m‐fluorobromobenzene for all ligands except DavePhos, which gave an approximate 1:1 mixture of α‐/β‐arylated products. Next, the effect of the substitution pattern of the aryl bromide reactant was studied with DavePhos as the ligand. We showed that electronic factors played a major role in the α/β‐arylation selectivity, with electron‐withdrawing substituents favoring β‐arylation. Kinetic and deuterium‐labeling experiments suggested that the rate‐limiting step of β‐arylation with DavePhos as the ligand was the palladium–enolate‐to‐homoenolate isomerization, which occurs by a β? H‐elimination, olefin‐rotation, and olefin‐insertion sequence. A dimeric oxidative‐addition complex, which was shown to be catalytically competent, was isolated and structurally characterized. A common mechanism for α‐ and β‐arylation was described by DFT calculations. With DavePhos as the ligand, the pathway leading to β‐arylation was kinetically favored over the pathway leading to α‐arylation, with the palladium–enolate‐to‐homoenolate isomerization being the rate‐limiting step of the β‐arylation pathway and the transition state for olefin insertion its highest point. The nature of the rate‐limiting step changed with PCy₃ and PtBu₃ ligands, and with the latter, α‐arylation became kinetically favored. The trend in selectivity observed experimentally with differently substituted aryl bromides agreed well with that observed from the calculations. The presence of electron‐withdrawing groups on these bromides mainly affected the α‐arylation pathway by disfavoring C? C reductive elimination. The higher activity of the ligands of the biaryldialkylphosphine ligands compared to their corresponding trialkylphosphines could be attributed to stabilizing interactions between the biaryl backbone of the ligands and the metal center, thereby preventing deactivation of the β‐arylation pathway.     

Efficient P‐Chiral Biaryl Bisphosphorus Ligands for Palladium‐Catalyzed Asymmetric Hydrogenation

A series of structurally novel P‐chiral biaryl bisphosphorus ligands L1‐L5 (BABIBOPs) are developed, providing high efficiency for the first time in palladium‐catalyzed asymmetric hydrogenation of β‐aryl and β‐alkyl substituted β‐keto esters. With the Pd‐ L3 (iPr‐BABIBOP) catalyst, a series of chiral β‐hydroxyl carboxylic esters are formed in excellent enantioselectivities (up to>99% ee) and yields at catalyst loading as low as 0.01 mol%.     

Ethyl 1,4‐Dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylates by a Tandem SNAr‐Addition‐Elimination Reaction

A series of N‐substituted 1,4‐dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylate esters has been prepared in two steps from ethyl 2‐(2‐chloronicotinoyl)acetate. Treatment of the β‐ketoester with N,N‐dimethylformamide dimethyl acetal in N,N‐dimethylformamide (DMF) gave a 95% yield of the 2‐dimethylaminomethylene derivative. Subsequent reaction of this β‐enaminone with primary amines in DMF at 120^oC for 24 h then afforded the target compounds in 47–82% yields by a tandem S_NAr‐addition‐elimination reaction. Synthetic and procedural details as well as a mechanistic rationale are presented.     

Synthesis of sulfur‐containing hyperbranched polymers by the bisthiolation polymerization of diethynyl disulfide derivatives

The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by ¹H and ¹³C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl₃. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with phenol derivatives: The synthesis of polymers containing an allyl aryl ether moiety in the main chain

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with oxygen nucleophiles such as hydroquinone and bisphenol A gave new unsaturated polyethers containing an allyl aryl ether moiety and pendant hydroxy groups. The polyaddition with 1a was largely affected by the phosphine ligands employed and the reaction temperature. The polyaddition with hydroquinone and bisphenol A was conducted at room temperature for 24 h in tetrahydrofuran in the presence of PPh₃ and gave the desired polyethers in good yields, the number‐average molecular weights (M_n) of which were 5700 and 7700, respectively. 1,2‐Bis(diphenylphosphino)ethane (dppe) was not effective in the polyaddition with 1a . The polyaddition of 1b with hydroquinone and bisphenol A gave the corresponding polyethers despite the kinds of ligands employed (PPh₃ and dppe), contrary to the polyaddition with 1a . The polyaddition of 1b with 4,4′‐biphenol was also carried out in the presence of Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) and afforded the expected polyether with a high M_n value (M_n = 24,900). In addition, vinyloxirane 1b could reacted with racemic 1,1′‐bi‐2‐naphthol to give the corresponding polyether in a good yield. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 476–482, 2003     

Palladium‐Catalyzed Annulation of 1,2‐Diborylalkenes and ‐Arenes with 1‐Bromo‐2‐[(Z)‐2‐bromoethenyl]arenes: A Modular Approach to Multisubstituted Naphthalenes and Fused Phenanthrenes

(Z)‐1,2‐Diaryl‐1,2‐bis(pinacolatoboryl)ethenes underwent double‐cross‐coupling reactions with 1‐bromo‐2‐[(Z)‐2‐bromoethenyl]arenes in the presence of [Pd(PPh₃)₄] as a catalyst and 3 M aqueous Cs₂CO₃ as a base in THF at 80 °C. The double‐coupling reaction gave multisubstituted naphthalenes in good to high yields. Annulation of 1,2‐bis(pinacolatoboryl)arenes with bromo(bromoethenyl)arenes in the presence of a catalyst system that consisted of [Pd₂(dba)₃] (dba=dibenzylideneacetone) and 2‐dicyclohexylphosphino‐2′,6′‐dimethoxybiphenyl (SPhos) under the same conditions produced fused phenanthrenes in good to high yields. The first annulation coupling occurred regiospecifically at the bromoethenyl moiety. This procedure is applicable to the facile synthesis of polysubstituted anthracenes, benzothiophenes, and dibenzoanthracenes through a double annulation pathway by using the corresponding dibromobis[(Z)‐2‐bromoethenyl]benzenes as diboryl coupling partners.     

Conversion of iminoacyl quinolinylpalladium (II) complexes into novel oxo‐pyrrolo[3,4‐b] quinolines via depalladation reactions

Oxidative addition reactions of quinolines 1a , b with Pd(dba)₂ in the presence of PPh₃ (1:2) in acetone gave dinuclear palladium complexes [Pd(C,N‐2‐C₉ H₄N‐CHO‐3‐R‐6)Cl(PPh₃)]₂ [(R = H ( 2a ), R = OMe ( 2b ), which were reacted with isocyanide XyNC (Xy = 2,6‐Me₂C₆H₃) to give novel iminoacyl quinolinylpalladium complexes 3a , b in good yields (81 and 77%). Cyclopalladated complexes 3a , b were also obtained in low yields (39 and 33.5%) via one‐pot reaction of 1a , b with isonitrile XyNC:Pd(dba)₂ (4:1). The reaction of 3a , b with Tl(TfO) (TfO = triflate, CF₃SO₃) in the presence of H₂O or EtOH causes depalladation reactions of complexes to provide the corresponding organic compounds 4a , b , 5a , b and 6a , b in yields of 41, 27 and 18 ? 19%, respectively. The products were characterized by satisfactory elemental analyses and spectral studies (IR, ¹H, ¹³C and ³¹P NMR). The crystal structures 2a , 3a and 3b were determined by X‐ray diffraction studies. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparations of Saturated N‐P‐N Type Secondary Phosphine Oxides and their Applications in Cross‐Coupling Reactions

A series of cyclohexane‐1,2‐diamine ( 3a – 3d ) and benzene‐1,2‐diamine derivatives ( 3e – 3h ) were pre‐ pared. Followed by hydrolysis, the reaction of 3a – 3c with PCl₃ successfully led to the formation of cor‐ responding metastable saturated heteroatom‐substituted secondary phosphine oxides (HASPO 4a – 4c ), a tautomer of the saturated heteroatom‐substituted phosphinous acid (HAPA). Whereas ambient‐stable diamine‐coordinated palladium complexes were obtained, HAPA‐coordinated palladium complexes were not successfully synthesized. The molecular structures of HASPO 4c , Pd(OAc)₂(3a) , PdBr₂(3b) and Pd(OAc)₂(3c) and [Cu(NO₃)(3d)⁺][NO₃ ^? ] were determined by single‐crystal X‐ray diffraction method. Catalysis of in‐situ Suzuki‐Miyaura cross‐coupling reactions for aryl bromides and phenylboronic acid using diamine 3a as ancillary ligand showed that the optimized reaction condition at 60 °C is the combination of 2 mmol % 3a /3.0 mmol KOH/1.0 mL 1,4‐dioxane/1 mmol % Pd(OAc)₂. Moreover, moderate reactivity was observed when using aryl chlorides as substrates (supporting infor‐ mation). When diamine 3d was employed in Heck reaction, good tolerance of functional groups of aryl bromides were observed while using 4‐bromoanisole and styrene as substrates. The optimized condi‐ tion for Heck reaction at 100 °C is 3 mmol % 3d /3.0 mmol CsF/1.0 mL toluene/3 mmol % Pd(OAc)₂. In general, cyclohexane‐1,2‐diamine derivatives exhibited better catalytic properties than those of benzene‐1,2‐diamines.     

A highly efficient synthesis of (Z)‐1‐aryl‐2‐silyl‐1‐ stannylethenes and their conversion to (E)‐2‐ arylethenyl‐, (Z)‐2‐(2‐pyridyl)ethenyl‐ and allenyl‐silanes

A Pd(dba)₂–P(OEt)₃ combination allowed the silastannation of arylacetylenes, 1‐hexyne or propargyl alcohols with tributyl(trimethylsilyl)stannane to take place at room temperature, producing (Z)‐2‐silyl‐1‐stannyl‐1‐substituted ethenes in high yields. Novel silyl(stannyl)ethenes were fully characterized by ¹H‐, ¹³C‐, ²⁹Si‐ and ¹¹⁹Sn‐NMR as well as infrared and mass analyses. Treatment of a series of (Z)‐1‐aryl‐2‐silyl‐1‐stannylethenes and (Z)‐1‐(3‐pyridyl)‐2‐silyl‐1‐stannylethene with hydrochloric acid or hydroiodic acid in the presence of tetraethylammonium chloride (TEACl) or tetrabutylammonium iodide (TBAI) led to the exclusive formation of (E)‐trimethyl(2‐arylethenyl)silanes with high stereoselectivity. A similar reaction of (Z)‐1‐(2‐anisyl)‐2‐silyl‐1‐stannylethene also produced E‐type trimethyl[2‐(2‐anisyl)ethenyl]silane, while (Z)‐trimethyl [2‐(2‐pyridyl)ethenyl]silane was produced exclusively from (Z)‐1‐(2‐pyridyl)‐2‐silyl‐1‐stannylethene. Protodestannylation of (Z)‐1‐[hydroxy(phenyl)methyl]‐2‐silyl‐1‐stannylethene with trifluoroacetic acid took place via the β‐elimination of hydroxystannane, providing trimethyl(3‐phenylpropa‐1,2‐dienyl)silane quite easily. The destannylation products were also fully characterized. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of 4‐substituted styrene compounds via palladium catalyzed Suzuki–Miyaura reaction using bidentate Schiff base ligands

Air‐stable symmetric Schiff base have been synthesized and proved to be efficient ligands for Suzuki–Miyaura reaction between aryl bromides and arylboronic acids using PdCl₂(CH₃CN)₂ as palladium source under aerobic conditions. The coupling reaction proceeded smoothly using N,N‐bis(anthracen‐9‐ylmethylene)benzene‐1,2‐diamine (L₇) as ligand to provide 4‐substituted styrene compounds in good yields. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of Asymmetrically Substituted Terpyridines by Palladium‐Catalyzed Direct C?H Arylation of Pyridine N‐Oxides

The synthesis of asymmetrically substituted 2,2′:6′,2′′‐terpyridines is reported. First, palladium‐catalyzed C? H arylation of pyridine N‐oxides with substituted bromopyridines gave 2,2′‐bipyridine N‐oxides, which were further arylated in a second step to form 2,2′:6′,2′′‐terpyridine N‐oxides. Yields of up to 77 % were obtained with N‐oxides bearing an electron‐withdrawing ethoxycarbonyl substituent in the 4‐position. Pd(OAc)₂ with either P(tBu)₃ or P(o‐tolyl)₃ was used as the catalyst. Cyclometalated complexes derived from Pd(OAc)₂ and these phosphines were also effective. K₃PO₄ as the base gave better results than K₂CO₃. Subsequent deoxygenation with H₂ and Pd/C as the catalyst gave the asymmetrically substituted 2,2′:6′,2′′‐terpyridines in near quantitative yield. This reaction sequence significantly reduces the number of steps required in comparison with known cross‐coupling methods and therefore allows convenient and scalable access to substituted terpyridines.     

Nature of the modifying action of white phosphorus on the properties of nanosized hydrogenation catalysts based on bis(dibenzylideneacetone)palladium(0)

The catalytic properties and nature of the nanoparticles forming in the system based on Pd(dba)₂ and white phosphorus are reported. A schematic mechanism is suggested for the formation of nanosized palladium-based hydrogenation catalysts. The mechanism includes the formation of palladium nanoclusters via the interaction of Pd(dba)₂ with the solvent (N,N-dimethylformamide) and substrate and the formation of palladium phosphide nanoparticles. The inhibiting effect exerted by elemental phosphorus on the catalytic process is due to the conversion of part of the Pd(0) into palladium phosphides, which are inactive in hydrogenation under mild conditions, and the formation of mainly segregated palladium nanoclusters and palladium phosphide nanoparticles. By investigating the interaction between Pd(dba)₂ and white phosphorus in benzene, it has been established that the formation of palladium phosphides under mild conditions consists of the following consecutive steps: Pd(0) → PdP₂ → Pd₅P₂ → Pd₃P. It is explained why white phosphorus can produce diametrically opposite effects of on the catalytic properties of nanosized palladium-based hydrogenation catalysts, depending on the nature of the palladium precursor.     

Synthesis of herbicidal 3‐substituted‐4(3H)‐pyrimidinones under high pressure

The reaction of an N‐monosubstituted amidine with a β‐ketoester to afford a pyrimidinone is sluggish at best under normal conditions. We now report that this reaction can be effected in moderate yield under high pressure. Thus, 2,6‐dichloro‐4‐pyridyl‐(N‐prop‐2‐ynyl)carboxamidine (4b) was reacted with three α‐substituted‐β‐ketoesters (2b‐d) at 10–16 kbar to afford herbicidal 2‐(2,6‐dichloro‐4‐pyridyl)‐3‐(prop‐2‐ynyl)‐4(3H)‐pyrimidinones 5b and 5c in 15 ‐ 43% yield. This result expands the scope of reactions promoted by application of high pressure.     

Pd0‐Mediated Rapid Coupling between Methyl Iodide and Heteroarylstannanes: An Efficient and General Method for the Incorporation of a Positron‐Emitting 11C Radionuclide into Heteroaromatic Frameworks

The Pd⁰‐mediated rapid trapping of methyl iodide with an excess amount of a heteroaryl‐substituted tributylstannane has been investigated with the aim of incorporating a short‐lived ¹¹C‐labelled methyl group into the heteroaromatic carbon frameworks of important organic compounds, such as drugs with various heteroaromatic structures, in order to execute a positron emission tomography (PET) study of vital systems. The reaction was first performed by using our previously developed CH₃I/stannane/[Pd₂(dba)₃]/P(o‐CH₃C₆H₄)₃/CuCl/K₂CO₃ (1:40:0.5:2:2:2) system in DMF at 60 °C for 5 min (conditions A), however, the reaction gave low yields for various heteroaromatic compounds. Increasing the amount of phosphine ligand (conditions B) led to a significant improvement in the yield, but the conditions were still not suitable for a range of basic heteroaromatic structures. Use of the CuBr/CsF system (conditions C) also provided a result similar to that obtained under conditions B with an increased amount of the phosphine. Thus, pyridine and related heteroaromatic compounds remained less reactive substrates. The problem was overcome by replacing the DMF solvent with N‐methyl‐2‐pyrolidinone (NMP). The reaction in NMP at 60–100 °C for 5 min using a CH₃I/stannane/[Pd₂(dba)₃]/P(o‐CH₃C₆H₄)₃/CuBr/CsF (1:40:0.5:16:2:5) combination (conditions D) gave the methylated products in yields of more than 80 % (based on the reaction of CH₃I) for all of the heteroaromatic compounds listed in this study. Thus, the combined use of NMP and an increased amount of phosphine is important for promoting the reaction efficiently. The use of this general approach to rapid methylation has been well demonstrated by the synthesis of the PET tracers 2‐ and 3‐[¹¹C]methylpyridines by using [Pd₂(dba)₃]/P(o‐CH₃C₆H₄)₃/CuBr/CsF (1:16:2:5) in NMP at 60 °C for 5 min, which gives the desired products in HPLC analytical yields of 88 and 91 %, respectively.