Sterically and guest-controlled self-assembly of calix[4]arene derivatives

In solvents such as chloroform or benzene, tetraurea calix[4]arenes 1 form dimeric capsules in which one solvent molecule is usually included as guest. To explore the structural requirements for the formation of such hydrogen-bonded dimers we replaced one p-tolylurea residue by a simple acetamide function. The resulting calix[4]arene 2 a, substituted at its wide rim with one acetamide and three p-tolylurea functions, assumes a C(1)-symmetrical conformation in apolar solvents as shown by (1)H NMR, which is not compatible with the usual capsule. In the crystalline state, four molecules of 2 a, adopting a pinched cone conformation, assemble into a quasi S(4)-symmetrical tetramer stabilized by a cyclic array of 24 NH.O==C hydrogen bonds and four NH.pi interactions. Four acetamide groups are hydrogen-bonded to each other and pack tightly in the center of the assembly. All polar residues are buried inside the tetramer, the surface of which is lipophilic. Extensive NMR studies revealed similar structures in apolar solvents such as [D]chloroform or [D(6)]benzene for calixacetamides 2 a-c. The formation of these tetramers in solution is critically dependent on the size of the amide fragment, so that propionamide 2 d, butyramide 2 e, and p-tolylamide 2 f form only ill-defined aggregates. This is caused by steric crowding inside the tetrameric assembly. The tetramers persist during molecular dynamics simulations, and the optimized average structure of the MD run is similar to that found in the crystalline state. Theoretical studies revealed that cooperation of hydrogen bonds with multiple NH.pi, C--H.pi, and pi.pi attractions make the tetramer more stable than the capsular dimer with the solvent as guest. In the presence of tetraethylammonium salts, however, compounds 2 a-e form dimeric capsular assemblies, each incorporating a single ammonium cation. Only one of two possible regioisomeric dimers is formed, in which both acetamide groups are surrounded by two urea residues. These examples give striking evidence of how self-assembly in solution can be strongly dependent on subtle structural factors and of how the formation of dimeric capsules can be induced by the presence of an appropriate guest.     

Supramolecular Fullerene Polymers and Networks Directed by Molecular Recognition between Calix[5]arene and C60

A biscalix[5]arene–C₆₀ supramolecular structure was utilized for the development of supramolecular fullerene polymers. Di‐ and tritopic hosts were developed to generate the linear and network supramolecular polymers through the complexation of a dumbbell‐shaped fullerene. The molecular association between the hosts and the fullerene were carefully studied by using ¹H NMR, UV/Vis absorption, and fluorescence spectroscopy. The formation of the supramolecular fullerene polymers and networks was confirmed by diffusion‐ordered ¹H NMR spectroscopy (DOSY) and solution viscometry. Upon concentrating the mixtures of di‐ or tritopic hosts and dumbbell‐shaped fullerene in the range of 1.0–10 mmol L^?1, the diffusion coefficients of the complexes decreased, and the solution viscosities increased, suggesting that large polymeric assemblies were formed in solution. Scanning electron microscopy (SEM) was used to image the supramolecular fullerene polymers and networks. Atomic force microscopy (AFM) provided insight into the morphology of the supramolecular polymers. A mixture of the homoditopic host and the fullerene resulted in fibers with a height of (1.4±0.1) nm and a width of (5.0±0.8) nm. Interdigitation of the alkyl side chains provided secondary interchain interactions that facilitated supramolecular organization. The homotritopic host generated the supramolecular networks with the dumbbell‐shaped fullerene. Honeycomb sheet‐like structures with many voids were found. The growth of the supramolecular polymers is evidently governed by the shape, dimension, and directionality of the monomers.     

Cucurbit[7]uril: Surfactant Host–Guest Complexes in Equilibrium with Micellar Aggregates

In order to compare the formation of host–guest complexes between β‐cyclodextrin (β‐CD) or cucurbit[7]uril (CB7) and cationic surfactants we studied the hydrolysis of 4‐methoxybenzenesulfonyl chloride (MBSC). The selected surfactants allowed the length of the hydrocarbon chain to be varied between 6 and 18 carbon atoms. Contrary to the expected behaviour, the values of the binding constants between CB7 and surfactants are independent of the alkyl chain length of the surfactant. In the case of β‐CD, however, a clear dependence of the binding constant on the hydrophobic character of the surfactant was observed. The values obtained with CB7 are significantly higher than those obtained with β‐CD and these differences are explained to be a consequence of electrostatic interactions of the surfactants with the portals of CB7. It was found that a small percentage of uncomplexed CB7 was in equilibrium with the cationic micelles and this percentage increased on increasing the hydrophobic character of the surfactant.     

A Self‐Sorting Scheme Based on Tetra‐Urea Calix[4]arenes

Size and shape do matter : When dimerized in nonpolar solvents, an equimolar mixture of eleven tetra‐urea calix[4]arenes with different wide‐rim substituents self‐sorts into only six out of 35 different homo‐ and heterodimers (see picture). Since the calixarene scaffold and the four urea units are the same in all cases, the self‐sorting process is driven only by the cooperative action of steric requirements and stoichiometry.

     

Host–Guest Chemistry of Aromatic‐Amide‐Linked Bis‐ and Tris‐Calix[4]pyrroles with Bis‐Carboxylates and Citrate Anion

A small library of polytopic receptors has been synthesized from meso‐p‐ and meso‐m‐aminophenylcalix[4]pyrroles and p‐ or m‐phthaloyl or trimesic chloride. Selected bis‐carboxylates and the citrate anion, which either exhibit altered distribution profiles in cancerous tissues in comparison with healthy tissues or are metabolites of carcinogenic substances (for example, trans,trans‐muconic acid from benzene exposure in humans) were tested as ligands. Varied affinities and binding modes were observed as a function of the number of calix[4]pyrroles and the topology of amide units present in each of the polytopic receptors. The structures of the 1:1 complexes derived by molecular modeling are in excellent agreement with the results of ¹H NMR complexation studies.     

Desymmetrized Leaning Pillar[6]arene

In this work, a novel version of macrocyclic arenes, namely leaning pillar[6]arenes, was discovered and it can be considered as a tilted version of a pillar[6]arene with two hydroxy/alkoxy functionalities removed. Through a facile two‐step synthetic approaches, in conjunction with a diversity of post‐modification possibilities, a series of leaning pillar[6]arenes, with good cavity adaptability and enhanced guest‐binding capability, was synthesized, and their self‐assembly in single‐crystal states is presented. DFT calculations demonstrated that the lower rotational barrier of unsubstituted phenylene rings, the uneven electron density centered at the leaning phenyl rings, and the polarization effect along the edge generated by the hydrogen‐bond‐induced orientation of hydroxy groups greatly affected the host‐guest properties, and meanwhile provided an intuitive explanation for the pillar‐like and rigid structure of traditional pillar[6]arenes. Significantly, the crystal structure of cyclo‐oligomeric quinone was obtained by direct oxidation of leaning pillar[6]arenes.     

Evaluation of DFT Methods and Implicit Solvation Models for Anion‐Binding Host‐Guest Systems

Although supramolecular chemistry is traditionally an experimental discipline, computations have emerged as important tools for the understanding of supramolecules. We have explored how well commonly used density functional theory quantum mechanics and polarizable continuum solvation models can calculate binding affinities of host‐guest systems. We report the calculation of binding affinities for eight host–guest complexes and compare our results to experimentally measured binding free energies that span the range from ?2.3 to ?6.1 kcal mol^?1. These systems consist of four hosts (biotin[6]uril, triphenoxymethane, cryptand, and bis‐thiourea) with different halide ions (F^?, Cl^?, Br^?) in various media including organic and aqueous. The mean average deviation (MAD) of calculated from measured ΔG_a is 2.5 kcal mol^?1 when using B3LYP‐D3 with either CPCM or PCM. This MAD value lowers even more by eliminating two outliers: 1.1 kcal mol^?1 for CPCM and 1.2 kcal mol^?1 for PCM. The best DFT and implicit solvation model combination that we have studied is B3LYP?D3 with either CPCM or PCM.     

Hydrogen Adsorption and Diffusion in p‐tert‐Butylcalix[4]arene: An Experimental and Molecular Simulation Study

Experimental adsorption isotherms were measured and computer simulations were performed to determine the nature of the H₂ gas uptake in the low‐density p‐tert‐butylcalix[4]arene (tBC) phase. ¹H NMR peak intensity measurements for pressures up to 175 bar were used to determine the H₂ adsorption isotherm. Weak surface adsorption (up to ≈2 mass % H₂) and stronger adsorption (not exceeding 0.25 mass % or one H₂ per calixarene bowl) inside the calixarene phase were detected. The latter type of adsorbed H₂ molecule has restricted motion and shows a reversible gas adsorption/desorption cycle. Pulsed field gradient (PFG) NMR pressurization/depressurization measurements were performed to study the diffusion of H₂ in the calixarene phases. Direct adsorption isotherms by exposure of the calixarene phase to pressures of H₂ gas to ≈60 bar are also presented, and show a maximum H₂ adsorption of 0.4 H₂ per calixarene bowl. Adsorption isotherms of H₂ in bulk tBC have been simulated using grand canonical Monte Carlo calculations in a rigid tBC framework, and yield adsorptions of ≈1 H₂ per calixarene bowl at saturation. Classical molecular dynamics simulations with a fully flexible calixarene molecular force field are used to determine the guest distribution and inclusion energy of the H₂ in the solid with different loadings.     

Guest‐Induced 2‐D Metallopolycapsular Networks Based on a 1,3‐Alternate Calix[4]arene Derivative

Solvothermal reactions of the calix[4]arene tetraacetic acid (H₄CTA) with zinc nitrate in the presence of α,ω‐diaminoalkanes afford two‐dimensional metallopolycapsular networks of the formula {[Me₂NH₂]₂[G@(Zn₂(CTA)₂)] ? (DMF)₂ ? (H₂O)₄}_n (G=⁺NH₃–(CH₂)_n–NH₃⁺, n=2, 3, 4; DMF=N,N‐dimethylformamide). These metallopolycapsular networks are built up of metallocapsules that consist of two CTA and two Zn^II ions. Short alkanediyldiammonium (⁺NH₃–(CH₂)_n–NH₃⁺, n=2, 3, 4) guest ions are accommodated in each capsule of the metallopolycapsular network through a variety of supramolecular interactions. The thermal behaviours and the solid‐state photoluminescent properties of these complexes were also investigated.     

Synthesis of Doubly Ethyl‐Bridged Bis(p‐sulfonatocalix[4]arene) and Its Supramolecular Polymerization with Viologen Dimer

A water‐soluble supramolecular polymer with a high degree of polymerization and viscosity has been constructed based on the strong host–guest interaction between p‐sulfonatocalix[4]arenes (SC4As) and viologen. A homoditopic doubly ethyl‐bridged bis(p‐sulfonatocalix[4]arene) (d‐SC4A) was prepared and its binding behavior towards methyl viologen compared with the singly ethyl‐bridged bis(p‐sulfonatocalix[4]arene) (s‐SC4A) by NMR spectroscopy and isothermal titration calorimetry. By employing a viologen dimer (bisMV⁴⁺) as the homoditopic guest, two linear AA/BB‐type supramolecular polymers, d‐SC4A?bisMV⁴⁺ and s‐SC4A?bisMV⁴⁺, were successfully constructed. Compared with s‐SC4A?bisMV⁴⁺, d‐SC4A?bisMV⁴⁺ shows much higher solubility and viscosity, and has also been characterized by viscosity, diffusion‐ordered NMR spectroscopy, dynamic light scattering, and atomic force microscopy measurements. Furthermore, the polymer is responsive to electrostimulus as viologen is electroactive, which was studied by cyclic voltammetry. This study represents a proof‐of‐principle as the polymer can potentially be applied as a self‐healing and degradable polymeric material.     

Photoresponsive Hybrid Raspberry‐Like Colloids Based on Cucurbit[8]uril Host–Guest Interactions

Hybrid raspberry‐like colloids (HRCs) were prepared by employing cucurbit[8]uril (CB[8]) as a supramolecular linker to assemble functional polymeric nanoparticles onto a silica core. The formed HRCs are photoresponsive and can be reversibly disassembled upon light irradiation. This facile supramolecular approach provides a platform for the synthesis of colloids with sophisticated structures and properties.