A Comparison of the Stability and Reactivity of Diamido‐ and Diaminocarbene Copper Alkoxide and Hydride Complexes

The mononuclear N‐heterocyclic carbene (NHC) copper alkoxide complexes [(6‐NHC)CuOtBu] (6‐NHC=6‐MesDAC ( 1 ), 6‐Mes ( 2 )) have been prepared by addition of the free carbenes to the tetrameric tert‐butoxide precursor [Cu(OtBu)]₄, or by protonolysis of [(6‐NHC)CuMes] (6‐NHC=6‐MesDAC ( 3 ), 6‐Mes ( 4 )) with tBuOH. In contrast to the relatively stable diaminocarbene complex 2 , the diamidocarbene derivative 1 proved susceptible to both thermal and hydrolytic ring‐opening reactions, the latter affording [(6‐MesDAC)Cu(OC(O)CMe₂C(O)N(H)Mes)(CNMes)] ( 6 ). The intermediacy of [(6‐MesDAC)Cu(OH)] in this reaction was supported by the generation of Cu₂O as an additional product. Attempts to generate an isolable copper hydride complex of the type [(6‐MesDAC)CuH] by reaction of 1 with Et₃SiH resulted instead in migratory insertion to generate [(6‐MesDAC‐H)Cu(P(p‐tolyl)₃)] ( 9 ) upon trapping by P(p‐tolyl)₃. Migratory insertion was also observed during attempts to prepare [(6‐Mes)CuH], with [(6‐Mes‐H)Cu(6‐Mes)] ( 10 ) isolated, following a reaction that was significantly slower than in the 6‐MesDAC case. The longer lifetime of [(6‐Mes)CuH] allowed it to be trapped stoichiometrically by alkyne, and also employed in the catalytic semi‐reduction of alkynes and hydrosilylation of ketones.     

Darstellung,Charakterisierung und Reaktionsverhalten von Natrium‐ und Kaliumhydridosilylamiden R2(H)Si—N(M)R′ (M = Na,K) — Kristallstruktur von [(Me3C)2(H)Si—N(K)SiMe3]2·THF

Preparation, Characterization and Reaction Behaviour of Sodium and Potassium Hydridosilylamides R₂(H)Si—N(M)R′ (M = Na, K) — Crystal Structure of [(Me₃C)₂(H)Si—N(K)SiMe₃]₂ · THF The alkali metal hydridosilylamides R₂(H)Si—N(M)R′ 1a‐Na — 1d—Na and 1a‐K — 1d‐K ( a : R = Me, R′ = CMe₃; b : R = Me, R′ = SiMe₃; c : R = Me, R′ = Si(H)Me₂; d : R = CMe₃, R′= SiMe₃) have been prepared by reaction of the corresponding hydridosilylamines 1a — 1d with alkali metal M (M = Na, K) in presence of styrene or with alkali metal hydrides MH (M = Na, K). With NaNH₂ in toluene Me₂(H)Si—NHCMe₃ ( 1a ) reacted not under metalation but under nucleophilic substitution of the H(Si) atom to give Me₂(NaNH)Si—NHCMe₃ ( 5 ). In the reaction of Me₂(H)Si—NHSiMe₃ ( 1b ) with NaNH₂ intoluene a mixture of Me₂(NaNH)Si—NHSiMe₃ and Me₂(H)Si—N(Na)SiMe₃ ( 1b‐Na ) was obtained. The hydridosilylamides have been characterized spectroscopically. The spectroscopic data of these amides and of the corresponding lithium derivatives are discussed. The ²⁹Si‐NMR‐chemical shifts and the ²⁹Si—¹H coupling constants of homologous alkali metal hydridosilylamides R₂(H)Si—N(M)R′ (M = Li, Na, K) are depending on the alkali metal. With increasing of the ionic character of the M—N bond M = K > Na > Li the ²⁹Si‐NMR‐signals are shifted upfield and the ²⁹Si—¹H coupling constants except for compounds (Me₃C)(H)Si—N(M)SiMe₃ are decreased. The reaction behaviour of the amides 1a‐Na — 1c‐Na and 1a‐K — 1c‐K was investigated toward chlorotrimethylsilane in tetrahydrofuran (THF) and in n‐pentane. In THF the amides produced just like the analogous lithium amides the corresponding N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2a — 2c ) in high yields. The reaction of the sodium amides with chlorotrimethylsilane in nonpolar solvent n‐pentane produced from 1a‐Na the cyclodisilazane [Me₂Si—NCMe₃]₂ ( 8a ), from 1b‐Na and 1‐Na mixtures of cyclodisilazane [Me₂Si—NR′]₂ ( 8b , 8c ) and N‐silylation product 2b , 2c . In contrast to 1b‐Na and 1c‐Na and to the analogous lithium amides the reaction of 1b‐K and 1c‐K with chlorotrimethylsilane afforded the N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2b , 2c ) in high yields. The amide [(Me₃C)₂(H)Si—N(K)SiMe₃]₂·THF ( 9 ) crystallizes in the space group C2/c with Z = 4. The central part of the molecule is a planar four‐membered K₂N₂ ring. One potassium atom is coordinated by two nitrogen atoms and the other one by two nitrogen atoms and one oxygen atom. Furthermore K···H(Si) and K···CH₃ contacts exist in 9 . The K—N distances in the K₂N₂ ring differ marginally.     

Zinc (II), palladium (II) and cadmium (II) complexes containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline derivatives: Synthesis,characterization and methyl methacrylate polymerization

A series of Zn (II), Pd (II) and Cd (II) complexes, [(L) _n MX ₂ ] _m (L = L‐a–L‐c; M = Zn, Pd; X = Cl; M = Cd; X = Br; n, m = 1 or 2), containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline ( L‐a ), 4‐methoxy‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐b ) and 4‐methoxy‐N‐methyl‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐c ) have been synthesized and characterized. The X‐ray crystal structures of Pd (II) complexes [L ₁ PdCl ₂ ] (L = L‐b and L‐c) revealed distorted square planar geometries obtained via coordinative interaction of the nitrogen atoms of pyridine and amine moieties and two chloro ligands. The geometry around Zn (II) center in [(L‐a)ZnCl ₂ ] and [(L‐c)ZnCl ₂ ] can be best described as distorted tetrahedral, whereas [(L‐b) ₂ ZnCl ₂ ] and [(L‐b) ₂ CdBr ₂ ] achieved 6‐coordinated octahedral geometries around Zn and Cd centers through 2‐equivalent ligands, respectively. In addition, a dimeric [(L‐c)Cd(μ ‐ Br)Br] ₂ complex exhibited typical 5‐coordinated trigonal bipyramidal geometry around Cd center. The polymerization of methyl methacrylate in the presence of modified methylaluminoxane was evaluated by all the synthesized complexes at 60°C. Among these complexes, [(L‐b)PdCl ₂ ] showed the highest catalytic activity [3.80 × 10⁴ g poly (methyl methacrylate) (PMMA)/mol Pd hr^?1], yielding high molecular weight (9.12 × 10⁵ g mol^?1) PMMA. Syndio‐enriched PMMA (characterized using ¹H‐NMR spectroscopy) of about 0.68 was obtained with T_g in the range 120–128°C. Unlike imine and amine moieties, the introduction of N‐methyl moiety has an adverse effect on the catalytic activity, but the syndiotacticity remained unaffected.     

Homoleptic group 12 metal bis(mercaptoimidazolyl)borate complexes M(Bm(R))2 (M = Zn,Cd, Hg)

The sodium salt of the bis(2-mercapto-1-methylimidazolyl)borate anion [Bm(Me)](-) and those of the new bis(2-mercapto-1-alkylimidazolyl)borates [Bm(R)](-) (R = Bz, Bu(t), p-Tol) have been readily obtained from NaBH(4) and the appropriate 2-mercapto-1-alkylimidazoles. To contrast the binding preferences of the group 12 metals in a sulfur-rich environment, the four complete series of homoleptic complexes M[Bm(R)](2) (M = Zn, Cd, Hg), including the first bis(mercaptoimidazolyl)borate derivatives of cadmium and mercury, have been prepared. X-ray diffraction studies of Cd[Bm(Me)](2) and M[Bm(tBu)](2) (M = Zn, Cd, Hg) show the presence of distorted tetrahedral [MS(4)] central cores supplemented by two weak vicinal M.H-B bonds, interactions which appear to be a common feature in the coordination chemistry of Bm(R) ligands. In the case of zinc, it has been found that only in the presence of bulky ligands, as in Zn[Bm(tBu)](2), may an unexpected expansion in the coordination number from four to six be induced. This observation suggests the viability of octahedral intermediates in the processes whereby certain zinc enzymes transfer or exchange metal ions.     

Synthetic,Mechanistic, and Theoretical Studies on the Generation of Iridium Hydride Alkylidene and Iridium Hydride Alkene Isomers

Experimental and theoretical studies on equilibria between iridium hydride alkylidene structures, [(Tp^Me2)Ir(H){?C(CH₂R)ArO }] (Tp^Me2=hydrotris(3,5‐dimethylpyrazolyl)borate; R=H, Me; Ar=substituted C₆H₄ group), and their corresponding hydride olefin isomers, [(Tp^Me2)Ir(H){R(H)C? C(H)OAr}], have been carried out. Compounds of these types are obtained either by reaction of the unsaturated fragment [(Tp^Me2)Ir(C₆H₅)₂] with o‐C₆H₄(OH)CH₂R, or with the substituted anisoles 2,6‐Me₂C₆H₃OMe, 2,4,6‐Me₃C₆H₂OMe, and 4‐Br‐2,6‐Me₂C₆H₂OMe. The reactions with the substituted anisoles require not only multiple C? H bond activation but also cleavage of the Me? OAr bond and the reversible formation of a C? C bond (as revealed by ¹³C labeling studies). Equilibria between the two tautomeric structures of these complexes were achieved by prolonged heating at temperatures between 100 and 140 °C, with interconversion of isomeric complexes requiring inversion of the metal configuration, as well as the expected migratory insertion and hydrogen‐elimination reactions. This proposal is supported by a detailed computational exploration of the mechanism at the quantum mechanics (QM) level in the real system. For all compounds investigated, the equilibria favor the alkylidene structure over the olefinic isomer by a factor of between approximately 1 and 25. Calculations demonstrate that the main reason for this preference is the strong Ir–carbene interactions in the carbene isomers, rather than steric destabilization of the olefinic tautomers.     

Tweaking the affinity of aryl‐substituted diazosalicylato‐ and pyridine ligands towards Zn (II) and its neighbors in the periodic system of the elements,Cu (II) and Cd (II), and their antimicrobial activity

A series of six new Zn (II) compounds, viz., [Zn(HL^ASA)₂(Py)₂] ( 1 ), [Zn(HL^MASA)₂(Py)₂] ( 2 ), [Zn(HL^MASA)₂(4‐MePy)₂] ( 3 ), [Zn(HL^CASA)₂(4‐MePy)₂] ( 4 ), [Zn(HL^BASA)₂(Py)₂] ( 5 ), [Zn(HL^BASA)₂(4‐MePy)₂] ( 6 ) and representative Cu (II) and Cd (II) complexes, viz., [Cu(HL^ASA)₂(Py)₂(H₂O)] ( 7 ) and [Cd(HL^BASA)₂(Py)₃] ( 8 ) [(HL^XASA)^? = para‐substituted 5‐[(E)‐2‐(aryl)‐1‐diazenyl]‐2‐hydroxybenzoate with X = H (ASA), Me (MASA), Cl (CASA) or Br (BASA); Py = pyridine; 4‐MePy = 4‐methylpyridine] have been synthesized and characterized by spectroscopic techniques and single‐crystal X‐ray diffraction analysis. The structural characterization of the compounds revealed distorted tetrahedral ( 1 – 6 ), square‐pyramidal ( 7 ) and pentagonal‐bipyramidal ( 8 ) coordination geometries around the metal atom, in which the aryl‐substituted diazosalicylate ligands are coordinated only through the oxygen atoms of carboxylate groups, either in an anisobidentate or isobidentate mode; meanwhile, the 2‐hydroxy groups of the monoanionic ligand (HL^XASA)^? are involved only in intramolecular O‐H···O hydrogen bonds with the carboxylate function. In the crystal structures of 1 – 8 , the complex molecules are assembled by π‐stacking interactions giving mostly infinite 1D strands. The intermolecular binding in the solid state structures is accomplished by diverse additional non‐covalent contacts including C‐H···O, C‐H···N, C‐H···π, C‐H···Br, O···Br, Br···π and van der Waals contacts. Although the primary and secondary ligands in the Zn (II) complex series 1 – 6 carry different substituents at the periphery (X = H, Me, Cl, Br for (HL^XASA)^? and R = H, Me for 4‐Py‐R), five of the crystal structures were isostructural. Additionally, the antimicrobial activity of the pro‐ligands H₂L^XASA and their Zn (II), Cu (II) and Cd (II) compounds were studied in a comparative manner, showing high sensitivity (IZD ≥ 20) against Bacillus subtilis.     

NATURE OF SELENOCYANATE BONDING IN THE COMPLEXES OF [MM1(NCSe)4] (M=Co,Ni AND M1Zn,Cd, Hg) WITH CERTAIN PYPIDINE DERIVATIVES

Abstract

Complexes of [MM′(NCSe)₄] (M=Co, Ni and M′=Zn, Cd, Hg) with certain ligands(L) viz. 3-cyanopyridine, 3-aminopyridine, nicotinamide and isonicotinic acid hydrazide have been synthesized and characterized. Their molar conductance, magnetic moment, infrared and electronic spectral studies indicate that these complexes are of three types: cationic-anionic viz. [ML₆] (Zn(NCSe)₄), monomeric bridged viz. [(L₄)M(NCSe)₂Cd(SeCN)₂] and polymeric bridged viz. [dbnd](SeCN)₂L₂M(NCSe)₂Hg(SeCN)₂[dbnd]. The softness and hardness of M, M′, -N-(NCSe′) and -Se-(SeCN-) have also been calculated to derive certain conclusions.     

Porphyrins Fused to N‐Heterocyclic Carbenes (NHCs): Modulation of the Electronic and Catalytic Properties of NHCs by the Central Metal of the Porphyrin

We report herein a detailed study of the use of porphyrins fused to imidazolium salts as precursors of N‐heterocyclic carbene ligands 1 M . Rhodium(I) complexes 6 M – 9 M were prepared by using 1 M ligands with different metal cations in the inner core of the porphyrin (M=Ni^II, Zn^II, Mn^III, Al^III, 2H). The electronic properties of the corresponding N‐heterocyclic carbene ligands were investigated by monitoring the spectroscopic changes occurring in the cod and CO ancillary ligands of [( 1 M )Rh(cod)Cl] and [( 1 M )Rh(CO)₂Cl] complexes (cod=1,5‐cyclooctadiene). Porphyrin–NHC ligands 1 M with a trivalent metal cation such as Mn^III and Al^III are overall poorer electron donors than porphyrin–NHC ligands with no metal cation or incorporating a divalent metal cation such as Ni^II and Zn^II. Imidazolium salts 3 M (M=Ni, Zn, Mn, 2H) have also been used as NHC precursors to catalyze the ring‐opening polymerization of L ‐lactide. The results clearly show that the inner metal of the porphyrin has an important effect on the reactivity of the outer carbene.     

One‐dimensional Diamagnetic‐metal Nitronyl Nitroxide Radical Complexes with Dicyanoargentate(I) Bridges: M(NIT4Py)2[Ag(CN)2]2 (M= Zn,Cd)

Two diamagnetic‐metal nitronyl nitroxide radical complexes with dicyanoargentate(I) bridges M(NIT4Py)₂[Ag(CN)₂]₂ (M= Zn, Cd) were synthesized. X‐ray crystallography reveals that the two compounds are isomorphous, which crystallize in the triclinic space group. Their structures consist of infinite chains of M(NIT4Py)₂ units linked by [Ag(CN)₂]^? μ₂‐bridging ligands. The magnetic measurements showed that the χ_MT values are nearly constants at higher temperature for both complexes. The sharp decreasing of χ_MT values at lower temperature are related to intermolecular antiferromagnetic interactions, which result from the shortest interchain contacts of nitroxide groups in the crystals.     

Zinc(II) and Cadmium(II) Metal Complexes with Bis(tetrazole) Ligands: Synthesis and Crystal Structures

Two new metal complexes [Zn( L¹ )]_n ( 1 ) and [Cd₃( L² )₂Cl₂(H2O)6]_n ( 2 ) (H₂ L¹ = 1,5‐bis(tetrazol‐5‐yl)‐3‐oxapentane, H₂ L² = bis(tetrazol‐5‐yl)methane) have been synthesized and characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction analysis. Complex 1 was a 2‐D sheet constructed by L¹ and Zn(II) center, further assembled to form a three‐dimensional (3‐D) supramolecular networks through weak hydrogen‐bonding interactions. In the complex 2 , there were two unequivalent Cd(II) centers, and some of ligands L² adopted chelate coordination mode, and others adopted bridge coordination mode linking the Cd1 center and simultaneously bridging the Cd2 center, the Cl^‐ anions adopted μ₂ bridging mode, ligands L² and the Cl^‐ anions linked the Cd(II) centers to form a 3‐D supramolecular networks.     

Syntheses,structures, and luminescent properties of Zn(II) and Cd(II) complexes: 3-D supramolecules based on 2,6-bis(imino)pyridine ligands constructed by hydrogen bonding interactions

Six 5-coordinate 2,6-bis(imino)pyridine metal complexes, [2,6-(ArN=CMe)₂C₅H₃NMCl₂ · nCH₃CN] (Ar = 4-MeC₆H₄, M = Zn, n = 0.5, Zn1, M = Cd, n = 1, Cd1; Ar = 2,6-Et₂C₆H₃, M = Zn, n = 0.5, Zn2, M = Cd, n = 0.5, Cd2; Ar = 2,4,6-Me₃C₆H₂, M = Zn, n = 1, Zn3, M = Cd, n = 1, Cd3), were synthesized in acetonitrile by the reactions of the corresponding bis(imino)pyridines with ZnCl₂ or CdCl₂ · 2.5H₂O, respectively. The structures of Zn1–Zn3 and Cd1–Cd3 were determined by the single-crystal X-ray diffraction. In all complexes, the ligand is tridentate with further coordination by two chlorides, resulting in a distorted trigonal bipyramid. All complexes self-assemble through hydrogen bonding interactions to form a 3-D supramolecular structure. At 298 K in dichloromethane, all complexes have blue luminescent emissions at 405–465 nm, which can be attributed to ligand-centered π* → π transitions. The zinc and cadmium centers play a key role in enhancing fluorescent emission of the ligands.     

Structural Consequences of S → Se Substitution in some Symmetrical [M(S2CNR2)3] Complexes

The consequences of replacement of the symmetrically chelate ligands in [M(E₂CNR₂)₃] (E = S, Se) complexes of potential 32 symmetry by analogous mixed S,Se unsymmetrical chelates are explored for both small (M = Co) and large (M = In) metal atoms, and R = primary (Et) and secondary (ⁱPr) alkyl substituents by way of low‐temperature single crystal X‐ray studies of [(Co(SSeCNEt₂)₃] ([Co(Se₂CNEt₂)₃] also determined as datum), and [In(SSeCNR₂)₃], R = Et, ⁱPr. The structure of [(ⁱPr₂N·CS·Se)₂] is also recorded.     

Alkalimetalltetraethinylozincate und ‐cadmate AI2M(C2H)4 (AI = Na — Cs,M = Zn,Cd): Synthese,Kristallstruktur und spektroskopische Eigenschaften

Alkali Metal Tetraethinylozincates and ‐cadmates A^I₂M(C₂H)₄ (A^I = Na — Cs, M = Zn, Cd): Synthesis, Crystal Structures, and Spectroscopic Properties By reaction of A^IC₂H (A^I = Na — Cs) with divalent zinc and cadmium salts in liquid ammonia the alkali metal tetraethinylozincates and ‐cadmates A^I₂M(C₂H)₄ (M = Zn, Cd) were accessible as polycrystalline powders. While Na₂M(C₂H)₄ is amorphous to X‐rays and the crystal structure of Cs₂Zn(C₂H)₄ could not be solved up to now, the remaining compounds are isotypic to the already known crystal structures of the potassium compounds, as was deduced from powder diffraction with X‐rays and synchrotron radiation. They crystallise in the tetragonal space group I4₁a, contain [M(C₂H)₄]^2— tetrahedra and show structural relationships to the scheelit and anatas structure types. Raman spectroscopic investigations confirm the existence of tetrahedral fragments with C‐C triple bonds in the alkali as well as in the amorphous alkaline earth metal compounds A^IIM(C₂H)₄ (A^II = Mg — Ba, M = Zn, Cd).     

Bimetallic fluorine-substituted anilido-aldimine zinc complexes for CO2/(cyclohexene oxide) copolymerization

Regioselective nucleophilic aromatic substitution of an o-fluorine occurs to afford fluorine-substituted o-phenylene-bridged bis(anilido-aldimine) compounds o-C6H4[(C6H2R2)N=CH-C6F4-(H)N(C6H3R'2)]2 when Li(H)N-C6H3R'2 (R' = iPr, Et, Me) is reacted with o-C6H4[(C6H2R2)N=CH-C6F5]2 (R = iPr, Et, Me) in a nonpolar solvent such as diethyl ether or toluene. Successive additions of Me2Zn and SO2 gas to the bis(anilido-aldimine) compounds afford quantitatively dinuclear mu-methylsulfinato zinc complexes o-C6H4[[(C6H2R2)N=CH-C6F4-N(C6H3R'2)-kappa2N,N]Zn(mu-OS(O)Me)]2 (R = iPr, R' = iPr, 3a; R = iPr, R' = Me, 3c; R = Et, R' = (i)Pr, 3d; R = Et, R' = Et, 3e; R = Et, R' = Me, 3f; R = Me, R' = iPr, 3g; R = Me, R' = Et, 3h; R = Me, R' = Me, 3i). The molecular structure of 3c was confirmed by X-ray crystallography. Fluorine-substituted complexes 3a-i show significantly higher TOF (turnover frequencies) than the unfluorinated analogues for CO2/(cyclohexene oxide) copolymerization. The TOF is highly sensitive to the substituents R and R', and the highest TOF (2480 h(-1)) is obtained with 3g (R = Me, R' = iPr). Complex 3g is less sensitive to the residual protic impurities present in the monomers and shows activity at such a low catalyst concentration as [Zn]:[cyclohexene oxide] = 1:50,000, at which the unfluorinated analogue is completely inactive. By realizing the activity at such an extremely low [Zn]:[cyclohexene oxide] ratio, we achieve a high TON (turnover number) up to 10,100. High-molecular-weight polymers (M(n), 100,000-200,000) are obtained with a rather broad molecular-weight distribution (M(w)/M(n), 1.3-2.5). The obtained polymers are not perfectly alternating, and variable carbonate linkages (65-85%) are observed depending on the N-aryl ortho substituents R and R' and the polymerization conditions.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

Syntheses and crystal structures of bis(4-dimethylaminopyridine) group 12 trifluoroacetates — M(OCOCF3)2·2DMAP (M=Zn, Cd, Hg)

Bis(4-dimethylaminopyridine) group 12 trifluoroacetates—M(OCOCF₃)₂·2DMAP (M=Zn, Cd, Hg) were prepared in quantitative yields from the anhydrous metal trifluoroacetates and DMAP. All compounds crystallize in the triclinic space group (no. 2) with two molecules per unit cell. While Zn(OCOCF₃)₂·2DMAP is built up by well-separated tetrahedral units exhibiting strongly covalent ZnO bonds to monodentate trifluoroactate groups, Cd(OCOCF₃)₂·2DMAP and Hg(OCOCF₃)₂·2DMAP form dimeric units. The metal centers are distorted octahedrally surrounded by two axial DMAP ligands, two ionic bridging and one chelating trifluoroacetate group.     

Zinn in der Peripherie von Bis(aren)metall‐Komplexen des Vanadiums und Chroms

Metal π Complexes of Benzene Derivatives. 53 [1] Tin in the Periphery of Bis(arene)metal Complexes of Vanadium and Chromium By means of metal‐atom ligand‐vapor cocondensation as well as via wet chemical methods (lithiation and follow‐up reaction) the first organostannyl substituted bis(arene)metal complexes (R₃Sn‐η⁶‐C₆H₅)₂M have been prepared: 15 (R = Me, M = V), 16 (R = Ph, M = V), 13 (R = Me, M = V), 17 (R = Ph, M = Cr). Despite the bulkiness of the Ph₃Sn groups the geometry of the central sandwich unit in 17 deviates only marginally from that of the parent complex (C₆H₆)₂Cr ( 2 ). The triclinic unit cell of 17 (space group: P1; a = 9.414(4), b = 9.877(5), c = 11.012(13) Å; α = 83.51(7), β = 87.95(7), γ = 72.67(4)°) contains one independent molecule. Perturbation of the electronic structure of the bis(arene)metal unit by organostannyl groups appears to be minute because EPR spectra of the M(d⁵) species fail to reveal deviations from axial symmetry. The potentials for reversible oxidation of the Me₃Sn‐substituted complexes 13 and 15 differ insignificantly (anodic shifts ≤ 20 mV) from those of the parent species 1 and 2 ; reductions are irreversible in both cases. More sizeable anodic shifts are observed for the Ph₃Sn‐derivatives 16 and 17 ; here as well, only the redox pairs 0/+ are reversible. The resistance of the neutral complexes to protic media contrasts to ready hydrodestannylation of the complex cations. By way of metal exchange, employing n‐butyl lithium, 13 affords (Li‐η⁶‐C₆H₅)₂Cr strictly 1,1′‐disubstituted and devoid of auxiliary base.     

Group 12 metal monoselenocarboxylates: synthesis, characterization, structure and their transformation to metal selenide (MSe; M = Zn, Cd, Hg) nanoparticles

Reactions of [MCl2(tmeda)] with potassium salts of monoselenocarboxylic acids gave complexes of the general formula [M(SeCOR)2(tmeda)] (M = Zn, Cd; R = Ph, Tol; Tol = C6H4-p-CH3; tmeda = Me2NCH2CH2NMe2). The analogous mercury complexes were unstable at room temperature and afforded HgSe nanoparticles during the course of reaction. All the complexes were characterized by elemental analysis, IR, UV-vis, NMR (1H, 13C, 77Se, 113Cd) data. The X-ray structural analysis of [Cd(SeCOPh)2(tmeda)] revealed that the complex is a discrete monomer having an approximate tetrahedral coordination environment around the central metal atom with monodentate (Se-bonded) selenocarboxylates. Thermal behavior of these complexes was studied by TG analysis. Pyrolysis in a furnace or in HDA (hexadecylamine) gave MSe nanoparticles, which were characterized by XRD, EDAX, SEM and absorption spectroscopy.     

Reactivity of [M2(μ‐Cl)2(cod)2] (M=Ir,Rh) and [Ru(Cl)2(cod)(CH3CN)2] with Na[H2B(bt)2]: Formation of Agostic versus Borate Complexes

Treatment of [M₂(μ‐Cl)₂(cod)₂] (M=Ir and Rh) with Na[H₂B(bt)₂] (cod=1,5‐cyclooctadiene and bt=2‐mercaptobenzothiazolyl) at low temperature led to the formation of dimetallaheterocycles [(Mcod)₂(bt)₂], 1 and 2 ( 1 : M=Ir and 2 : M=Rh) and a borate complex [Rh(cod){κ²‐S,S′‐H₂B(bt)₂}], 3 . Compounds 1 and 2 are structurally characterized metal analogues of 1,5‐cyclooctadiene. Metal–metal bond distances of 3.6195(9) Å in 1 and 3.6749(9) Å in 2 are too long to consider as bonding. In an attempt to generate the Ru analogue of 1 and 2 , that is [(Rucod)₂(bt)₂], we have carried out the reaction of [Ru(Cl)₂(cod)(CH₃CN)₂] with Na[H₂B(bt)₂]. Interestingly, the reaction yielded agostic complexes [Ru(cod)L{κ³‐H,S,S′‐H₂B(bt)₂}], 4 and 5 ( 4 : L=Cl; 5 : L=C₇H₄NS₂). One of the key differences between 4 and 5 is the presence of different ancillary ligands at the metal center. The natural bond orbital (NBO) analysis of 1 and 2 shows that there is four lone pairs of electrons on each metal center with a significant amount of d character. Furthermore, the electronic structures and the bonding of these complexes have been established on the ground of quantum‐chemical calculations. All of the new compounds were characterized by IR, ¹H, ¹¹B, ¹³C NMR spectroscopy, and X‐ray crystallographic analysis.     

Polybismuthide Anions as Ligands: The Homoleptic Complex [(Bi7)Cd(Bi7)]4− and the Ternary Cluster [(Bi6)Zn3(TlBi5)]4−

We present the results from a reactivity study of the binary anion (TlBi₃)^2? towards Group 12 metal compounds MPh₂ (M=Zn, Cd, Hg) to gain access to coordination compounds of polycyclic polypnictide molecules such as Bi₇^3? or Bi₁₁^3?. The coordination chemistry of these polybismuthide cages has been unprecedented to date, while it has been known for a long time for the lighter Group 15 anions Pn₇^3? (Pn=P, As, Sb). The use of (TlBi₃)^2?, previously shown to release Tl under certain conditions in situ, resulted in the formation of the first heterometallic polyanion in which a nortricyclane‐type polybismuthide coordinates a transition‐metal atom, [(Bi₇)Cd(Bi₇)]^4?. Reactions with the lighter Group 12 metal precursor yielded the uncommon ternary cluster [(Bi₆)Zn₃(TlBi₅)]^4?, most likely representing a reaction intermediate, and at the same time hinting at the formation of the nortricyclane‐shaped cage. Quantum‐chemical studies provide deeper insight into the stability trends of the [(E₇)M(E₇)]^4? anion family and reveal a complex bonding situation in [(Bi₆)Zn₃(TlBi₅)]^4?, which features both localized and multi‐center bonding.