On‐Surface Metalation and 2D Self‐Assembly of Pyrphyrin Molecules Into Metal‐Coordinated Networks on Cu(111)

The metalation of the tetradentate molecule pyrphyrin by copper substrate atoms on a Cu(111) surface is studied. Pyrphyrin, in contrast to porphyrin, consists of four fused pyridine groups instead of pyrrol groups. Using thermal desorption spectroscopy (TDS ) and N 1s X‐ray photoelectron spectroscopy (XPS ), we show that metalation of the monolayer of pyrphyrin with Cu atoms from the Cu(111) surface occurs at 377 K. The formation of an extended two‐dimensional (2D) network is observed with scanning tunneling microscopy (STM ). A honeycomb‐like lattice of metalated pyrphyrin molecules is formed by intermolecular connection via the two cyano groups at the periphery of pyrphyrin as well as Cu adatoms. Dehydrogenation at the periphery of the molecule is observed during annealing at 520 K. The surface‐adsorbed metal‐pyrphyrin has the potential to serve as a molecular catalyst.     

2H‐Tetrakis(3,5‐di‐tert‐butyl)phenylporphyrin on a Cu(110) Surface: Room‐Temperature Self‐Metalation and Surface‐Reconstruction‐Facilitated Self‐Assembly

The adsorption behavior of 2H‐tetrakis(3,5‐di‐tert‐butyl)phenylporphyrin (2HTTBPP) on Cu(110) and Cu(110)–(2×1)O surfaces have been investigated by using variable‐temperature scanning tunneling microscopy (STM) under ultrahigh vacuum conditions. On the bare Cu(110) surface, individual 2HTTBPP molecules are observed. These molecules are immobilized on the surface with a particular orientation with respect to the crystallographic directions of the Cu(110) surface and do not form supramolecular aggregates up to full monolayer coverage. In contrast, a chiral supramolecular structure is formed on the Cu(110)–(2×1)O surface, which is stabilized by van der Waals interactions between the tert‐butyl groups of neighboring molecules. These findings are explained by weakened molecule–substrate interactions on the Cu(110)–(2×1)O surface relative to the bare Cu(110) surface. By comparison with the corresponding results of Cu–tetrakis(3,5‐di‐tert‐butyl)phenylporphyrin (CuTTBPP) on Cu(110) and Cu(110)–(2×1)O surfaces, we find that the 2HTTBPP molecules can self‐metalate on both surfaces with copper atoms from the substrate at room temperature (RT). The possible origins of the self‐metalation reaction at RT are discussed. Finally, peculiar irreversible temperature‐dependent switching of the intramolecular conformations of the investigated molecules on the Cu(110) surface was observed and interpreted.     

Preparation and characterization of copper/silver bimetallic nanowires with core‐shell structure

Core‐shell copper/silver bimetallic nanowires were prepared by replacement reaction with citric acid and polyvinylpyrollidone at room temperature. A uniform silver coating was obtained by strictly controlling the molar ratio of Ag/Cu. The copper/silver composite was characterized by X‐ray diffraction, scanning electron microscopy, electron probe microanalysis and X‐ray photoelectron spectroscopy. Microscopic analysis shows that a well‐copper/silver core‐shell structure was formed. Thermo‐gravimetry and differential thermal analysis to the composite nanowires show that the silver coatings efficiently inhibit the oxidation of Cu. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescent Thermochromism of 2D Coordination Polymers Based on Copper(I) Halides with 4‐Hydroxythiophenol

Solvothermal reactions between copper(I) halides and 4‐mercaptophenol give rise to the formation of three coordination polymers with general formula [Cu₃X(HT)₂]_n (X=Cl, 1 ; Br, 2 ; and I, 3 ). The structures of these coordination polymers have been determined by X‐ray diffraction at both room‐ and low temperature (110 K), showing a general shortening in Cu?S, Cu?X and Cu?Cu bond lengths at low temperatures. 1 and 2 are isostructural, consisting of layers in which the halogen ligands act as μ₃‐bridges joining two Cu1 and one Cu2 atoms whereas in 3 the iodine ligands is as μ₄‐mode but the layers are quasi‐isostructural with 1 or 2 . These compounds show a reversible thermochromic luminescence, with strong orange emission for 1 and 2 , but weaker for 3 at room temperature, whereas upon cooling at 77 K 1 and 2 show stronger yellow emission, and 3 displays stronger green emission. DFT calculations have been used to rationalize these observations. These results suggest a high potential for this novel and promising stimuli‐responsive materials.     

Mechanistic Study of a Photocatalyzed CS Bond Formation Involving Alkyl/Aryl Thiosulfate

This study presents thioether construction involving alkyl/aryl thiosulfates and diazonium salt catalyzed by visible‐light‐excited [Ru(bpy)₃Cl₂] at room temperature in 44–86 % yield. Electron paramagnetic resonance studies found that thiosulfate radical formation was promoted by K₂CO₃. Conversely, radicals generated from BnSH or BnSSBn (Bn=benzyl) were clearly suppressed, demonstrating the special property of thiosulfate in this system. Transient absorption spectra confirmed the electron‐transfer process between [Ru(bpy)₃Cl₂] and 4‐MeO‐phenyl diazonium salt, which occurred with a rate constant of 1.69×10⁹ M ^?1 s^?1. The corresponding radical trapping product was confirmed by X‐ray diffraction. The full reaction mechanism was determined together with emission quenching data. Furthermore, this system efficiently avoided the over‐oxidation of sulfide caused by H₂O in the photoexcited system containing Ru²⁺. Both aryl and heteroaryl diazonium salts with various electronic properties were investigated for synthetic compatibility. Both alkyl‐ and aryl‐substituted thiosulfates could be used as substrates. Notably, pharmaceutical derivatives afforded late‐stage sulfuration smoothly under mild conditions.     

Characterizing Pressure‐Induced Uranium CH Agostic Bonds

The diuranium(III) compound [UN′′₂]₂(μ‐η⁶:η⁶‐C₆H₆) (N′′=N(SiMe₃)₂) has been studied using variable, high‐pressure single‐crystal X‐ray crystallography, and density functional theory . In this compound, the low‐coordinate metal cations are coupled through π‐ and δ‐symmetric arene overlap and show close metal? CH contacts with the flexible methyl CH groups of the sterically encumbered amido ligands. The metal–metal separation decreases with increasing pressure, but the most significant structural changes are to the close contacts between ligand CH bonds and the U centers. Although the interatomic distances are suggestive of agostic‐type interactions between the U and ligand peripheral CH groups, QTAIM (quantum theory of atoms‐in‐molecules) computational analysis suggests that there is no such interaction at ambient pressure. However, QTAIM and NBO analyses indicate that the interaction becomes agostic at 3.2 GPa.     

高活性Cu/SiO2催化剂应用于丙二酸二乙酯加氢制1,3-丙二醇

作为聚对苯二甲酸丙二醇酯(PTT)的不可替代原料,1,3-丙二醇(1,3-PDO)广泛应用于聚酯、树脂、化妆品、润滑剂和制冷剂等领域.采用丙二酸二乙酯(DEM)一步加氢合成1,3-PDO可避免传统化学工艺中醛类副产物的生成和生物法中产品纯度不高的问题,进而满足下游PTT的品质要求. Cu/SiO2催化剂因铜与载体间的强相互作用以及硅胶的弱酸性有利于催化活性中心的建立而被广泛应用于气相加氢反应,可以选择性地活化C?O键而不活化C?C键.因此,本文将Cu/SiO2催化剂应用于DEM加氢反应,重点考察了焙烧温度对催化剂结构与性能影响的本质原因.
　　采用蒸氨法制备Cu/SiO2催化剂,将一定量氨水滴加到硝酸铜水溶液中形成铜氨溶液后滴加JN-30硅溶胶,经老化、过滤、洗涤、烘干、焙烧、压片成型后得到40?60目的催化剂.将不同温度(623?1023 K)焙烧的Cu/SiO2催化剂装填入自制连续高压固定床反应器中进行DEM加氢反应,并采用N2物理吸脱附、电感耦合等离子体发射光谱、N2O化学吸附、X射线衍射、傅里叶红外光谱、H2程序升温还原(TPR)、透射电镜及X射线光电子能谱等手段对不同温度焙烧催化剂进行表征.结果表明,在723 K焙烧的催化剂具有最大的比表面积和最均一的孔径分布,其铜组分分散均匀,活性铜表面积最大,焙烧后可以形成最多的页硅酸铜,导致还原后Cu+/Cu0比例较高.在该催化剂作用下,于473 K、2.0 MPa、氢酯摩尔比330和液体空速1.8 h–1条件下, DEM转化率为90.7%,1,3-PDO选择性为32.3%.
　　焙烧温度对Cu/SiO2催化剂组成、织构、结构、形貌及还原后的价态有较大影响.在焙烧温度为623?1023 K时,低温焙烧有利于生成页硅酸铜,而高温焙烧则有利于形成CuO.在焙烧温度升高的过程中,铜组分形态会发生较大变化,在623?723 K焙烧的催化剂中页硅酸铜含量不断增加;继续升高温度至823 K,页硅酸铜含量减少,但是分散变差,导致铜的比表面积、孔体积和孔径最小;进一步升高温度至923 K,页硅酸铜消失, CuO分散均匀, H2-TPR的还原峰窄且对称;当温度升高到1023 K时,铜晶体迅速长大而较难被还原.     

Studies of Cu‐doped ZnS thin films prepared by sputtering technique

Radio frequency magnetron sputtering technique has been used to deposit Cu‐doped ZnS thin films on glass and n‐type Si(100) substrates at room temperature. Crystalline structure, surface morphology, and elemental oxidation states have been studied by X‐ray diffraction, field emission scanning electron microscopy, atomic force microscopy, and X‐ray photoelectron spectroscopy. Ultraviolet–visible spectroscopy has been employed to measure the transmittance, reflectance, and absorbance properties of coated films. The deposited thin films crystallize in zinc blende or sphalerite phases as proved by X‐ray diffraction analysis. The intensity of diffraction peaks decreases with increasing the dopant concentrations. The predominant diffraction peak related to (111) plane of ZnS is observed at 28.52° along with other peaks. The peak positions are shifted to higher angles with an increase of Cu concentrations. X‐ray photoelectron spectroscopy studies show that Cu is present in +1 oxidation state. Transmittance, reflectance, and absorbance properties of the deposited films have a slight variation with dopant concentrations. Copyright © 2016 John Wiley & Sons, Ltd.     

Cryo‐XPS study of xanthate adsorption on pyrite

The adsorption of xanthate on pyrite has been extensively studied. However, the adsorption mechanisms remain a subject of controversy. Formation of both dixanthogen and metal‐xanthate complexes has been suggested. In this study, both room temperature X‐ray photoelectron spectroscopy (XPS) (RT‐XPS) and liquid nitrogen temperature XPS (Cryo‐XPS) were used to study interactions between pyrite and xanthate. While dixanthogen was not detected by RT‐XPS, it was successfully identified through C1s and S 2p peaks using Cryo‐XPS. The impact of pH and copper activation on adsorption of xanthate on pyrite was also investigated. It was found that at low pH, dixanthogen is the dominant species of xanthate adsorption on pyrite. At high pH, metal‐xanthate complexes were found to be prevalent on pyrite surfaces, which are responsible for the surface hydrophobicity. Copper activation showed a significant effect on xanthate adsorption on Cu‐activated pyrite, resulting in mostly the formation of Cu‐xanthate complexes rather than dixanthogen, mainly in the form of Cu(I)‐isopropyl xanthate complex (CuIPX). Copyright © 2012 John Wiley & Sons, Ltd.     

Theoretical and Structural Analysis of Long CC Bonds in the Adducts of Polycyanoethylene and Anthracene Derivatives and Their Connection to the Reversibility of Diels–Alder Reactions

X‐ray structure determinations on four Diels–Alder adducts derived from the reactions of cyano‐ and ester‐substituted alkenes with anthracene and 9,10‐dimethylanthracene have shown the bonds formed in the adduction to be particularly long. Their lengths range from 1.58 to 1.62 Å, some of the longest known for Diels–Alder adducts. Formation of the four adducts is detectably reversible at ambient temperature and is associated with free energies of reaction ranging from ?2.5 to ?40.6 kJ mol^?1. The solution equilibria have been experimentally characterised by NMR spectroscopy. Density‐functional‐theory calculations at the MPW1K/6‐31+G(d,p) level with PCM solvation agree with experiment with average errors of 6 kJ mol^?1 in free energies of reaction and structural agreement in adduct bond lengths of 0.013 Å. To understand more fully the cause of the reversibility and its relationship to the long adduct bond lengths, natural‐bond‐orbital (NBO) analysis was applied to quantify donor–acceptor interactions within the molecules. Both electron donation into the σ*‐anti‐bonding orbital of the adduct bond and electron withdrawal from the σ‐bonding orbital are found to be responsible for this bond elongation.     

Self‐Assembled Architectures with Segregated Donor and Acceptor Units of a Dyad Based on a Monopyrrolo‐Annulated TTF–PTM Radical

An electron donor–acceptor dyad based on a polychlorotriphenylmethyl (PTM) radical subunit linked to a tetrathiafulvalene (TTF) unit through a π‐conjugated N‐phenyl–pyrrole–vinylene bridge has been synthesized and characterized. The intramolecular electron transfer process and magnetic properties of the radical dyad have been evaluated by cyclic voltammetry, UV/Vis spectroscopy, vibrational spectroscopy, and ESR spectroscopy in solution and in the solid state. The self‐assembling abilities of the radical dyad and of its protonated non‐radical analogue have been investigated by X‐ray crystallographic analysis, which revealed that the radical dyad produced a supramolecular architecture with segregated donor and acceptor units in which the TTF subunits were arranged in 1D herringbone‐type stacks. Analysis of the X‐ray data at different temperatures suggests that the two inequivalent molecules that form the asymmetric unit of the crystal of the radical dyad evolve into an opposite degree of electronic delocalization as the temperature decreases.     

Rhodium‐Catalyzed CS and CN Functionalization of Arenes: Combination of CH Activation and Hypervalent Iodine Chemistry

Rhodium‐catalyzed sulfonylation, thioetherification, thiocyanation, and other heterofunctionalizations of arenes bearing a heterocyclic directing group have been realized. The reaction proceeds by initial Rh^III‐catalyzed C?H hyperiodination of arene at room temperature followed by uncatalyzed nucleophilic functionalization. A diaryliodonium salt is isolated as an intermediate, which represents umpolung of the arene substrate, in contrast to previous studies that suggested umpolung of the coupling partner.     

Preferential Formation of SiOC over SiC Linkage upon Thermal Grafting on Hydrogen‐Terminated Silicon (111)

In a stringent and near oxygen‐free environment, Si?H surfaces were introduced to a trifluoroalkyne, an alcohol‐derivatized alkyne, as well as an equal mixture of both alkynes at a temperature of 130 °C. Contact angle measurements, high‐resolution X‐ray photoelectron spectroscopy (XPS), and angle‐resolved XPS were performed to examine the system. Si?H surfaces were found to have a strong preference towards the formation of Si?O?C rather than Si?C bonds when the alcohol and alkyne reactivities were compared.     

Bottom‐Up Design of a Copper–Ruthenium Nanoparticulate Catalyst for Low‐Temperature Ammonia Oxidation

A novel nanoparticulate catalyst of copper (Cu) and ruthenium (Ru) was designed for low‐temperature ammonia oxidation at near‐stoichiometric mixtures using a bottom‐up approach. A synergistic effect of the two metals was found. An optimum CuRu catalyst presents a reaction rate threefold higher than that for Ru and forty‐fold higher than that for Cu. X‐ray absorption spectroscopy suggests that in the most active catalyst Cu forms one or two monolayer thick patches on Ru and the catalysts are less active once 3D Cu islands form. The good performance of the tuned Cu/Ru catalyst is attributed to changes in the electronic structure, and thus the altered adsorption properties of the surface Cu sites.     

Click approach to the three‐component synthesis of novel β‐hydroxy‐1,2,3‐triazoles catalysed by new (Cu/Cu2O) nanostructure as a ligand‐free,green and regioselective nanocatalyst in water

Copper nanostructures were produced as an effective and regioselective catalyst for the synthesis of 1,2,3‐triazoles from a wide range of raw materials, such as sodium azide, epoxides and terminal alkynes, in water via a one‐pot three‐component click reaction. The new heterogeneous catalyst was prepared by a simple ball mill reduction of CuO with NaBH₄ using a ball‐to‐powder weight ratio of 50:1 under air atmosphere at room temperature. The catalyst was fully characterized using scanning electron microscopy, energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy and X‐ray diffraction. The copper nanostructures catalysed both ring opening and triazole cyclization steps. Products were obtained in high yields and short reaction times. The reactions were performed at ambient temperature in water as a green solvent. The Cu/Cu₂O nanostructures revealed high reusability and high stability via a simple recycling process.     

Unusual Nitrile–Nitrile and Nitrile–Alkyne Coupling of FcCN and FcCCCN

The reactions of the Group 4 metallocene alkyne complexes, [Cp*₂M(η²‐Me₃SiC₂SiMe₃)] ( 1 a : M=Ti, 1 b : M=Zr, Cp*=η⁵‐pentamethylcyclopentadienyl), with the ferrocenyl nitriles, Fc?C?N and Fc?C?C?C?N (Fc=Fe(η⁵‐C₅H₅)(η⁵‐C₅H₄)), is described. In case of Fc?C?N an unusual nitrile–nitrile C?C homocoupling was observed and 1‐metalla‐2,5‐diaza‐cyclopenta‐2,4‐dienes ( 3 a , b ) were obtained. As the first step of the reaction with 1 b , the nitrile was coordinated to give [Cp*₂Zr(η²‐Me₃SiC₂SiMe₃)(N?C‐Fc)] ( 2 b ). The reactions with the 3‐ferrocenyl‐2‐propyne‐nitrile Fc?C?C?C?N lead to an alkyne–nitrile C?C coupling of two substrates and the formation of 1‐metalla‐2‐aza‐cyclopenta‐2,4‐dienes ( 4 a , b ). For M=Zr, the compound is stabilized by dimerization as evidenced by single‐crystal X‐ray structure analysis. The electrochemical behavior of 3 a , b and 4 a , b was investigated, showing decomposition after oxidation, leading to different redox‐active products.     

Ketone Hydrogenation by Using ZnO−Cu(OH)Cl/MCM‐41 with a Splash of Water: An Environmentally Benign Approach

MCM‐41‐supported ZnO?Cu(OH)Cl nanoparticles were synthesized via an incipient wetness impregnation technique using zinc chloride and copper chloride salts as well as water at room temperature. The catalyst was characterized by powder X‐ray diffraction (PXRD), infrared spectroscopy (IR), and TGA, whereas surface and morphological studies were performed by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The above studies revealed the incorporation of metal species into the pores of MCM‐41, leading to a decrease in surface area of the nanoparticles that was found to be 239.079 m²/g. The substituents attached to the ketone determine the rate of the reaction, and the utilization of the green solvent ‘water’ astonishingly completes the hydrogenation reaction in 45 minutes at 40 °C with 100% conversion and 100% selectivity as analyzed by gas chromatography‐mass spectrometry. Hence, ZnO?Cu(OH)Cl/MCM‐41 nanoparticles with 2.46 wt% zinc and 6.39 wt% copper were demonstrated as an active catalyst for the reduction of ketones without using any gaseous hydrogen source making it highly efficient as well as environmentally and economically benign.     

Synthesis and Structural Determination of the Disordered Bixbyite Cu3‐xSb1+xO5.5+3x/2 with Spin‐Glass Behaviour

The ternary copper antimony oxide Cu_3‐xSb_1+xO_5.5+3x/2 (x=0.23) has been synthesized under 0.8–1.3 MPa pO₂ at 1022–1082 °C. Rietveld refinements of X‐ray and neutron powder diffraction patterns concluded that the oxide adopts a bixbyite type structure, crystallising in the cubic space group Ia‐3 with the unit cell parameter a=9.61164(4) Å at room temperature from powder neutron diffraction data. The cationic 8b and 24d sites were found to be occupationally disordered where both Cu and Sb could be found on both sites. This is supported by X‐ray absorption spectroscopy experiments showing more than one possible Cu environment. There was a significant net deficiency of oxygen in the compound which was first inferred from observations of a thermochromic‐like phenomena and also seen from in situ high temperature neutron diffraction experiments. Magnetic susceptibility and magnetization measurements show paramagnetic behaviour with spin‐glass like transition below 6 K.     

Catching an Entatic State—A Pair of Copper Complexes

The structures of two types of guanidine–quinoline copper complexes have been investigated by single‐crystal X‐ray crystallography, K‐edge X‐ray absorption spectroscopy (XAS), resonance Raman and UV/Vis spectroscopy, cyclic voltammetry, and density functional theory (DFT). Independent of the oxidation state, the two structures, which are virtually identical for solids and complexes in solution, resemble each other strongly and are connected by a reversible electron transfer at 0.33 V. By resonant excitation of the two entatic copper complexes, the transition state of the electron transfer is accessible through vibrational modes, which are coupled to metal–ligand charge transfer (MLCT) and ligand–metal charge transfer (LMCT) states.     

Regioselective Conversion of Arenes to N‐aryl‐1,2,3‐triazoles Using CH Borylation

A one‐pot protocol for the synthesis of N‐aryl 1,2,3‐triazoles from arenes by an iridium‐catalyzed C?H borylation/copper catalyzed azidation/click sequence is described. 1 mol % of Cu(OTf)₂ was found to efficiently catalyze both the azidation and the click reaction. The applicability of this method is demonstrated by the late‐stage chemoselective installation of 1,2,3‐triazole moiety into unactivated molecules of pharmaceutical importance.