Factors affecting electrical conductivity of carbon black-loaded rubber. II. Effect of concentration and type of carbon black on electrical conductivity of SBR

Effect of the concentration of four types of carbon black, namely, HAF, FEF, ISAF and GPF, on the electrical conductivity of SBR (1502) was studied. The anomalous behavior of conductivity [σ_min in σ(T) curves] becomes more pronounced as we approach a characteristic value of carbon concentration, F₀, at which maximum anomaly occurs; F₀ was found to depend on the type of carbon black. Moreover, the depth of the valley shape of the σ(T) curve increases with the particle size of carbon black used.     

Effect of small additions of carbon nanotubes on the electrical conductivity of polyurethane elastomer

The effect of small (0.002–0.018 wt %) additions of single-walled carbon nanotubes on the dielectric properties and electrical conductivity of crosslinked polyurethane elastomer is studied in the temperature range of 133–453 K and the 10^?3 to 10⁵ Hz range of electric field frequencies. It is shown that the dependence of direct current conductivity σ _dc on temperature deviates significantly from the Arrhenius dependence and is described by the Vogel-Fulcher-Tamman equation σ _dc = σ _dc0exp{?DT ₀/(T ? T ₀)}, where T ₀ is the Vogel temperature and D is the strength parameter. A correlation is found between the nonmonotonic dependences of the glass transition temperature (T _g), D parameter, and σ _dc and the concentration of nanotubes with earlier results for their effects on the physicomechanical characteristics (strength and Young’s modulus) of these systems.     

Enhanced electrical conductivity in chemically modified carbon nanotube/methylvinyl silicone rubber nanocomposite

Chemically modified multiwalled carbon nanotubes/methlyvinyl silicone rubber (m-MWNT/VMQ) nanocomposites with relatively good dispersion of nanotubes were prepared by treating the surface of MWNT using γ-aminopropyltriethoxy silane (KH550). Significant enhanced electrical conductivity was discovered in the m-MWNT/VMQ nanocomposites. The results could be attributed a strong interaction between m-MWNT and VMQ which was from the chemically modification of the surface for MWNT. The electrical property was also discussed in order to understand the percolation and electrical transport mechanism. The m-MWNT/VMQ nanocomposites with high conductivity in this study are promising application as one of novel functional materials.     

The electrical conductivity of poly-p-xylylene + CdS nanocomposites

The dependence of electrical conductivity on the concentration of CdS (c) and temperature (T) over the temperature range 10–300 K was studied for poly-p-xylylene-CdS (PPX + CdS) nanocomposites prepared by solid-state cryochemical synthesis. The results were discussed in terms of the heterogeneous conductivity model including various charge transfer mechanisms in various nanocomposite regions. Under the illumination of a film with c > 11 vol % by a daylight lamp, the conductivity increased, and the σ(T) dependence was metallic in character at low temperatures. The photoconductivity of films at larger concentrations c was caused by the appearance of photoexcited electrons in CdS nanoparticles, the separation of charges at the nanoparticle-matrix boundary, and percolation effects in films. The PPX matrix was shown to actively participate in electrical conductivity; electrons in this matrix jumped between phenyl rings. The experimental dependence of dark conductivity σ(T) at temperatures from 150 to 300 K was analyzed using the Mott hopping conductivity model with variable jump lengths. The main points of the Mott theory of hopping conductivity were discussed. Original Russian Text ? I.A. Misurkin, S.V. Titov, T.S. Zhuravleva, I.V. Klimenko, S.A. Zav’yalov, E.I. Grigor’ev, S.N. Chvalun, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 3, pp. 534–540.     

Mechanism of dc electrical conductivity in poly(vinyl chloride)

Dc conductivity measurements were performed as a function of temperature on unplasticized poly(vinyl chloride) and on PVC plasticized with various amounts of dioctylphthalate. The conductivity curves consist of two or three straight-line segments denoted I, II, and III with increasing of temperature. The intersection of segments I and II occurs at the glass-transition temperature T_g. The slope in region I is independent of the DOP concentration, while the slope in region II decreases slowly with an increase in the amount of DOP. No dependence of the conductivity on the molecular weight was found. From the conductivity curves, activation energies were evaluated below and above T_g. These satisfactorily coincide with those determined by dielectric loss or by electrical transient phenomena. A dc conduction mechanism is proposed based on electronic hopping favored by the micro-Brownian motions responsible for dielectric losses. These motions involve smaller chain lengths below than above T_g. The experimental results are discussed and interpreted in terms of the proposed mechanism.     

Diffusion and permeability of aldehydes into blends of natural rubber and chemically modified low molecular weight natural rubber

Low molecular weight natural rubber (LMWNR) obtained from natural rubber (NR) by depolymerization of natural rubber latex (NRL) was modified by epoxidation to 35% epoxide level to yield epoxidized low molecular weight natural rubber (ELMWNR). The ELMWNR was in turn modified in a solution of thioglycollic acid (TGA) (0.5 mol phr) to yield a product of 20% conversion of its initial LMWNR epoxide. Blends of NR with LMWNR, ELMWNR and epoxidized low molecular weight natural rubber thioglycollic acid (ELWMNR‐TGA) adduct were made. The mixes were vulcanized at 150°C for 20 min before determining the system parameters (n and k), the sorption (S), diffusion (D) and permeability (P) of the vulcanizates in acetaldehyde and formaldehyde solutions at three different temperatures (25, 40 and 60°C) for a period of 90 days. The sorption, diffusion and permeability of the vulcanizates were found to be temperature dependent. The vulcanizates containing ELMWNR were found not to be easily penetrated by both acetaldehyde and formaldehyde when compared with base mix A that is vulcanizates with only NR. The reaction system was found not to be spontaneous but dependent on the activation energies. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of carbon nanofibers on mechanical and electrical behaviors of acrylonitrile‐butadiene rubber composites

Recently, carbon nanofibers have become an innovative reinforcing filler that has drawn increased attention from researchers. In this work, the reinforcement of acrylonitrile butadiene rubber (NBR) with carbon nanofibers (CNFs) was studied to determine the potential of carbon nanofibers as reinforcing filler in rubber technology. Furthermore, the performance of NBR compounds filled with carbon nanofibers was compared with the composites containing carbon black characterized by spherical particle type. Filler dispersion in elastomer matrix plays an essential role in polymer reinforcement, so we also analyzed the influence of dispersing agents on the performance of NBR composites. We applied several types of dispersing agents: anionic, cationic, nonionic, and ionic liquids. The fillers were characterized by dibutylphtalate absorption analysis, aggregate size, and rheological properties of filler suspensions. The vulcanization kinetics of rubber compounds, crosslink density, mechanical properties, hysteresis, and conductive properties of vulcanizates were also investigated. Moreover, scanning electron microscopy images were used to determine the filler dispersion in the elastomer matrix. The incorporation of the carbon nanofibers has a superior influence on the tensile strength of NBR compared with the samples containing carbon black. It was observed that addition of studied dispersing agents affected the performance of NBR/CNF and NBR/carbon black materials. Especially, the application of nonylphenyl poly(ethylene glycol) ether and 1‐butyl‐3‐methylimidazolium tetrafluoroborate contributed to enhanced mechanical properties and electrical conductivity of NBR/CNF composites.     

Conductivity of carbon black-loaded styrene–butadiene rubber

Styrene–butadiene rubber (SBR) charged with 50 phr of HAF carbon black has been found to show a positive temperature coefficient of resistivity close to 0.07/°C at 27°C. Beyond a point (75°C) of minimum conductivity, however, it behaves as a normal noncrystalline semiconductor with a resistivity which decreases with rise of temperature with an activation energy of 0.56 eV. Blending the composition with poly(vinyl chloride) (PVC) shifts the minimum towards lower temperatures. The descending branch of the conductivity versus reciprocal absolute temperature characteristic is probably associated with thermal expansion of tunnelling paths separating the conducting carbon particles.     

Thermal characterization and electrical properties of Fe-modified cellulose long fibers and micro crystalline cellulose

Thermal properties of polylactic acid (PLA) filled with Fe-modified cellulose long fibers (CLF) and microcrystalline cellulose (MCC) were studied using thermo gravimetric analysis (TG), differential scanning calorimetry, and dynamic mechanical analysis (DMA). The Fe-modified CLFs and MCCs were compared with unmodified samples to study the effect of modification with Fe on electrical conductivity. Results from TG showed that the degradation temperature was higher for all composites when compared to the pure PLA and that the PLA composites filled with unmodified celluloses resulted in the best thermal stability. No comparable difference was found in glass transition temperature (T _g) and melting temperature (T _m) between pure PLA and Fe-modified and unmodified CLF- and MCC-based PLA biocomposites. DMA results showed that the storage modulus in glassy state was increased for the biocomposites when compared to pure PLA. The results obtained from a femtostat showed that electrical conductivity of Fe-modified CLF and MCC samples were higher than that of unmodified samples, thus indicating that the prepared biocomposites have potential uses where conductive biopolymers are needed. These modified fibers can also be tailored for fiber orientation in a matrix when subjected to a magnetic field.     

Highly enhanced electrical and mechanical properties of methyl methacrylate modified natural rubber filled with multiwalled carbon nanotubes

Developing conductive networks in a polymer matrix with a low percolation threshold and excellent mechanical properties is desired for soft electronics applications. In this work, natural rubber (NR) functionalized with poly(methyl methacrylate) (PMMA) was prepared for strong interfacial interactions with multiwalled carbon nanotubes (MWCNT), resulting in excellent performance of the natural rubber nanocomposites. The MWCNT and methyl methacrylate functional groups gave good filler dispersion, conductivity and tensile properties. The filler network in the matrix was studied with microscopy and from its non-linear viscoelasticity. The Maier-Göritze approach revealed that MWCNT network formation was favored in the NR functionalized with PMMA, with reduced electrical and mechanical percolation thresholds. The obvious improvement in physical performance of MWCNT/methyl methacrylate functionalized natural rubber nanocomposites was caused by interfacial interactions and reduced filler agglomeration in the NR matrix. The modification of NR with poly(methyl methacrylate) and MWCNT filler was demonstrated as an effective pathway to enhance the mechanical and electrical properties of natural rubber nanocomposites.     

Electrical conductivity of iodine-doped pseudo interpenetrating polymer networks of poly-(carbonate-urethane) and natural rubber

Recent DC conductivity measurements on iodine-doped full and psuedo IPNs of poly (carbonate-urethane) (PCU) and natural rubber (NR) reveal that these materials possess a modest conductivity. Both such full and pseudo IPNs (with linear NR chains) are single-phased materials if the NR is of sufficiently high molecular weight derived from Brazilian Manihot glaziovii. On iodine doping the electrical conductivity rises eight orders of magnitude of both the full IPN (to ca. 10^?5S cm^?1) and the pseudo IPN (to ca. 10^?4 S cm^?1). A simple theory based on the assumption that conduction occurs essentially along the linear NR chains, composing a percolation cluster, in the iodine-doped pseudo IPNs of PCU and NR accounts for the observed electrical conductivity dependence on temperature, iodine molality, and weight fraction of NR. As temperature decreases the DC conductivity falls and the material becomes essentially an insulator. At sufficiently low temperature (ca. 115 K) this trend reverses and the DC conductivity rises by two orders of magnitude with further decreasing temperature up to that of liquid helium. © 1994 John Wiley & Sons, Inc.     

Oxidative stress relaxation and the measurement of sol fraction in rubber vulcanizates

A simple method to determine the chain scission mechanism of the oxidative degradation of rubber vulcanizates is proposed. The method involves the measurement of oxidative stress decay and the change in sol fraction, which allow us to distinguish whether scission occurs randomly along the main chain, near crosslinks or of crosslinks. The applicability of this method was well established using natural rubber vulcanizates as the reference samples. The chain scission of cis-1,4-polyisoprene vulcanizaties was proved to take place randomly along the main chain irrespective of their crosslink structure. On the other hand, the chain scission of dicumyl peroxide cured cis-1,4-polybutadiene takes place selectively near crosslinks. It is suggested that the unusual behavior of cis-1,4-polybutadiene vulcanizates is due to the characteristic structure of the crosslinks.     

Microbial desulfurization of SBR ground rubber by Sphingomonas sp. and its utilization as filler in NR compounds

Microbial desulfurization of waste tyre rubber has been investigated with great efforts since 1990s, because waste rubber has created serious ecological and environmental problems. A microbial desulfurization technique for SBR ground rubber has been developed by a novel sulfur‐oxidizing bacterium Sphingomonas sp. The adaptability of Sphingomonas sp. with SBR ground rubber was tested with the amounts of SBR ground rubber varying from 0.5 to 4% g/l. The sol fraction of desulfurized SBR ground rubber increased 70%, compared with SBR ground rubber without desulfurization. Fourier transform infrared spectroscopy‐attenuated total reflectance (FTIR‐ATR) spectrum and X‐ray photoelectron spectroscopy (XPS) analysis of the desulfurized surface of vulcanized SBR flakes revealed that not only the oxidation of crosslinked S? S and S? C bonds, but also the rupture of C?C double bonds had happened to SBR vulcanizates during microbial desulfurization. The cure characteristics, such as scorch time and optimum cure time of natural rubber (NR) vulcanizates filled, were found to decrease with increasing contents of desulfurized SBR ground rubber, due to some reactive groups on its surface. NR vulcanizates filled with desulfurized SBR ground rubber had lower crosslink density and hardness, higher tensile strength and elongation at break, compared with those filled with SBR ground rubber of the same amount. Dynamic mechanical properties indicated that there were better crosslink distribution and stronger interfacial bonding between NR matrix and desulfurized SBR ground rubber. Scanning electron microscope (SEM) photographs showed that the fracture surfaces of NR vulcanizates filled with desulfurized SBR ground rubber had more smooth morphologies. Copyright © 2010 John Wiley & Sons, Ltd.     

Mechanical characteristics of hydrogenated natural rubber vulcanizates

Mechanical properties of partially hydrogenated natural rubber (HNR) vulcanizates were evaluated regarding their chemical structure and crystallizable nature of HNR, and are reported here, to the best of our knowledge, for the first time. HNRs of three levels of hydrogenation (20.6, 29.0, and 40.6 mol%) were successfully prepared by the chemical modification of natural rubber (NR) latex using N₂H₄ and H₂O₂ as reagents, in a sufficient amount for preparing sulfur‐crosslinked samples to be subjected to mechanical and structural measurements. The three HNR vulcanizates were found to be crystallizable upon stretching; it is noted that even 40.6 mol% hydrogenation did not prevent HNR vulcanizates from crystallization upon stretching, while their onset strain of crystallization was higher than that of NR vulcanizate. The hysteresis loss and residual strain up to a stretching ratio of 2 for the HNR vulcanizates tended to become larger with the increase in the degree of the hydrogenation. Tensile and dynamic mechanical properties of 20.6 mol% hydrogenated HNR vulcanizate were comparable to those of NR vulcanizate. From differential scanning calorimetry and temperature dispersion of dynamic modulus or loss, the glass transition temperatures of HNR vulcanizates were found to be almost the same as that of NR vulcanizate, which is also notable. The thermal stability of HNR vulcanizates was better than that of NR vulcanizate. Thus, this chemical modification seems to give a promising NR derivative whose properties can be equivalent or even better than the mother polymer. Copyright © 2008 John Wiley & Sons, Ltd.     

The Use of Thermogravimetry in the Study of Rubber Devulcanization

Thermogravimetry was employed to study the changes occurring in rubber vulcanizates during devulcanization carried out by microwave treatment, a new promising method of recycling rubber waste. The thermogravimetric parameters T _i , T ₅ and T _p and the compositions of devulcanizates in comparison with vulcanizates were determined. The results obtained allowed estimation of the degree of destruction of the polymer chains in response to microwave treatment and permitted establishment of the most advantageous conditions of devulcanization in order to obtain the best properties of rubber devulcanizates for reuse in rubber processing. The results demonstrated that thermogravimetry is a very useful method for investigation and control of the microwave devulcanization process. This revised version was published online in August 2006 with corrections to the Cover Date.     

Fracture morphology and mechanical properties of ethylene/vinyl acetate rubber vulcanizates reinforced by in situ prepared sodium methacrylate

Ethylene/vinyl acetate rubber (EVM) was reinforced by sodium methacrylate (NaMAA) that was in situ prepared through the neutralization of sodium hydroxide and methacrylic acid in EVM during mixing. The mechanical properties of EVM vulcanizates with different NaMAA loadings and at different crosslink densities were studied and compared with those of high abrasion furnace carbon black (HAF) filled EVM vulcanizates. The fracture surfaces of gum and filled EVM vulcanizates were observed with scanning electron microscopy. The results showed that NaMAA‐reinforced EVM vulcanizates had better mechanical properties than HAF/EVM vulcanizates. When the NaMAA loading was 50 phr, the tensile strength of the NaMAA/EVM vulcanizate was 30 MPa, the tear strength was 102 kN/m, and the elongation at break was over 400%. Fourier transform infrared analysis confirmed that NaMAA formed in the compounding process and underwent polymerization during vulcanization. Scanning probe microscopy analysis revealed that nanoscale particles dispersed in the NaMAA/EVM vulcanizates. The mechanical properties were correlated with the fracture morphology of all the vulcanizates. The tensile rupture of NaMAA‐filled EVM vulcanizates occurred through tearing from a crack in the bulk of the samples. Tear deviation occurred with the addition of NaMAA and resulted in a rough surface, leading to an improvement in the tear strength of NaMAA‐filled EVM vulcanizates. The micrographs of the tear surfaces of the vulcanizates indicated that the different fracture modes depended on the NaMAA loading and the crosslink density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1715–1724, 2004     

Grafting of methyl methacrylate onto natural rubber in supercritical carbon dioxide

The grafting of the methyl methacrylate (MMA) monomer onto natural rubber (NR) was carried out by supercritical carbon dioxide (scCO₂) swelling polymerization with benzoyl peroxide (BPO) as an initiator. Fourier transform–infrared spectroscopy (FT–IR) was used to confirm the formation of graft copolymers with the characteristic bands of symmetric C?O and C? O? C stretching vibrations at 1728 cm^?1 and 1147 cm^?1, respectively. The effects of the rubber‐to‐monomer ratio, amount of initiator, reaction time, and pressure on the monomer grafting level (GL) and grafting efficiency (GE) were investigated, and the optimum conditions for the preparation of NR‐g‐MMA were found to be 70:30 of the rubber‐to‐monomer ratio, 1.2% of the initiator content, and the reaction pressure of 23 MPa for 6 h. The thermal behavior of the NR and the different NR/MMA molar ratio grafted copolymer samples was studied by differential scanning calorimetry (DSC). The observed glass transition temperature (T_g) was consistent with the GL. The tensile strength, modulus of elasticity, elongation at break, hardness, and oil resistance of graft copolymers were determined and compared with the values of NR and that of polymerization products prepared in traditional toluene solution. The results showed that the tensile strength, modulus of elasticity, hardness and oil resistance were greatly improved after modification in scCO₂. Copyright © 2007 John Wiley & Sons, Ltd.     

Radiation effect on properties of carbon black filled NBR/EPDM rubber blends

Rubber blend of acrylonitrile butadiene rubber (NBR) and ethylene-propylene diene monomer (EPDM) rubber (50/50) has been loaded with increasing contents, up to 100 phr, of reinforcing filler, namely, high abrasion furnace (HAF) carbon black. Prepared composites have been subjected to gamma radiation doses up to 250 kGy to induce radiation vulcanization under atmospheric conditions. Mechanical properties, namely, tensile strength (TS), tensile modulus at 100% elongation (M₁₀₀), and hardness have been followed up as a function of irradiation dose and degree of loading with filler. On the other hand, variation of the swelling number as a physical property, as a function of same parameters, however, in car oil as well as brake oil has been undertaken. In addition, the electrical properties of prepared composites, namely, their electrical conductivity, were also evaluated. The thermal behavior of the prepared composites was also investigated. The results obtained indicate that improvement has been attained in different properties of loaded NBR/EPDM composites with respect to unloaded ones.     

Preparation and properties of graded styrene‐butadiene rubber vulcanizates

Styrene‐butadiene rubber (SBR) vulcanizates with graded network‐chain densities in the thickness direction were prepared by layering and heat pressing the compounding sheets. The effect of the gradient of network‐chain density on the mechanical properties of the graded rubber vulcanizates was investigated in comparison with those of SBR vulcanizates that were prepared from the homogeneous compounding sheets. The matrix with a high network‐chain density exclusively affected the mechanical properties of the graded rubber vulcanizates when the gradient was given in the thickness direction. © 2002 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 358–364, 2002; DOI 10.1002/polb.10096