Crystal structures of chloro-, bromo-, and nitro-substituted chromium(III) acetylacetonates

The molecular and crystal structures of chlorine-, bromine-, and nitro-substituted chromium(III) acetylacetonate are determined. Connecting the substituent to the central atom does not change bond lengths and valence angles in metal chelate rings. Studied chromium complexes are characterized by greater intermolecular interactions compared with analogous metal acetylacetonates. In some cases, intermolecular interactions increase the bend of chelate rings along the O?O line. Substituents do not interact with chromium ions of neighboring molecules because metal is blocked by three ligands.     

Molybdenum and copper catalysis of reductions by titanium(II) and titanium(III)

Reductions of vanadium(IV), benzoquinone, and tri-iodide, both by titanium(III) and by titanium(II), are catalyzed by molybdenum(VI). The VO(2+)-Ti(II) reaction is catalyzed by copper(II) as well. Reactions of Ti(II) with the oxidant in excess yield Ti(IV), as do reductions by Ti(III). Reactions proceed via competing uncatalyzed and catalyzed paths, with the latter components first order in catalyst. Kinetic patterns indicate that monomeric Mo(v) is the active species, but the dimeric Mo(v) species, [Mo(2)O(4)](2+), is without catalytic action. Catalytic constants pertaining to Ti(III) are remarkably similar to those for Ti(II), despite the 0.47 V difference in the standard potentials of the two reductants.     

The kinetics of the anation reaction of aquopentaamminecobalt(III) by malonate in acidic aqueous solution

The Co(NH₃)₅OH₂³⁺ ion reacts with malonate to form Co(NH₃)₅O₂CCH₂CO₂H²⁺ or Co(NH₃)₅O₂CCH₂CO₂⁺, depending on the pH of the reaction solution. The kinetics of this anation reaction have been studied as a function of [H⁺] for the acidity range 1.5 ≤ pH ≤ 6.0 in the temperature range of 60 to 80°C, the [total malonate] ≤ 0.5 M, and the ionic strength 1.0M. The anation by malonic acid follows second-order kinetics, the rate constant being 8.0 × 10^?5 M^?1·sec^?1 at 70°C, and the anations by bimalonate (Q₁, k₁) and malonate ion (Q₂, k₂) are consistent with an I_d mechanism. Typical values at 70°C for the ion pair formation constants are Q₁ = 1.3, Q₂ = 5.4M^?1; and for the interchange rate constants k₁ = 5.3 × 10^?4; k₂ = 7.3 × 10^?4 sec^?1. The activation parameters for the various rate constants are reported and the results discussed with reference to previously reported data for similar systems.     

Kinetics and mechanism of the reduction of tetrachloroaurate(III) by formate in acidic aqueous solution

Rate data for the reduction of AuCl₄⁻ by formate, were measured at different temperatures, formate, hydrogen and chloride ion concentrations. AuCl₄⁻ and AuCl₃(OH)⁻ react with HCOOH and HCOO⁻ in the rate-determining steps of the suggested reaction mechanism to produce AuCl₃(HCOO)⁻. The latter species undergoes a rapid redox reaction in which AuCl₂⁻, Au(o) and CO₂ are produced.     

Complexation of copper(I) by thiourea in acidic aqueous solution

The interaction of copper(II) and copper(I) with thiourea(Tu) has been investigated by UV and visible spectrophotometry. Over the range of concentrations of copper(I) and Tu(0.1–20)×10^–3 mol-dm^–3 in acid aqueous solutions there are two complexes, CuTu₂ ⁺ (log ₂=11.1) and the other has the ratio Cu/Tu=1/1 with the likely composition Cu₂Tu₂ ²⁺ with log ₂₂=18.5. By the determination of copper(0) solubility in acid thiourea solution and potentiometric measurements it was shown that the potential of the copper electrode is that of a non-equilibrium (corrosive) electrode.     

Reduction of hydrazines to amines with aqueous solution of titanium(III) trichloride

N-N bond cleavage in hydrazines is widely used in the preparation of amines and thus occupies a significant place in organic synthesis. In this paper, we report a new method for the reductive cleavage of N-N bonds in hydrazines by commercially available and cheap aqueous titanium(III) trichloride. The reaction proceeds smoothly under a broad pH range from acidic to neutral and basic conditions to afford amines in good yields. This method is compatible with substrates containing functionalities such as C-C double bonds, benzyl-nitrogen bonds, benzyloxy and acyl groups.     

Outer-Sphere electron-transfer and the effect of linkage isomerism in the titanium(III) reduction of nitro-pentacyanocobaltate(III) and nitro-, and nitrito-pentaamminecobalt(III) complexes in aqueous acidic media

The reductions of [Co(CN)₅NO₂]³⁻, [Co(NH₃)₅NO₂]²⁺ and [Co(NH₃)₅ONO]²⁺, by Ti^III in aqueous acidic solution have been studied spectrophotometrically. Kinetic studies were carried out using conventional techniques at an ionic strength of 1.0 mol dm⁻³ (LiCl/HCl) at 25.0 ± 0.1 °C and acid concentrations between 0.015 and 0.100 mol dm⁻³. The second-order rate constant is inverse—acid dependent and is described by the limiting rate law:- k₂ ≈ k₀ + k[H⁺]⁻¹,where k=k′K_a and K_a is the hydrolytic equilibrium constant for [Ti(H₂O)₆]³⁺. Values of k₀ obtained for [Co(CN)₅NO₂]³⁻, [Co(NH₃)₅NO₂]²⁺ and [Co(NH₃)₅ONO]²⁺ are (1.31 ± 0.05) × 10⁻² dm³ mol⁻¹ s⁻¹, (4.53 ± 0.08) × 10⁻² dm³ mol⁻¹ s⁻¹ and (1.7 ± 0.08) × 10⁻² dm³ mol⁻¹ s⁻¹ respectively, while the corresponding k′ values from reductions by TiOH²⁺ are 10.27 ± 0.45 dm³ mol⁻¹ s⁻¹, 14.99 ± 0.70 dm³ mol⁻¹ s⁻¹ and 17.93 ± 0.78 dm³ mol⁻¹ s⁻¹ respectively. Values of K _a obtained for the three complexes lie in the range (1–2) × 10⁻³ mol dm⁻³ which suggest an outer-sphere mechanism.     

The stabilization of managese(III) by azide ions in aqueous solution

The evidences of spontaneous oxidation of Mn(II) by the dissolved oxygen in azide buffer medium, which is dependent on the N (-)(3)HN (3) concentration, suggested a formation of stable Mn(III) complexes due to marked colour changes. Spectrophotometric studies combined with coulometric generation of Mn(III), in presence of large excess of Mn(II), showed a maximum absorbance peak at 432 nm. The molar absorptivity increases with azide concentration (0.44-3.9 mol 1(-1)) from 3100 to 6300 mol(-1) 1 cm(-1), showing a stepwise complex formation. Potential measurements of the Mn(III) Mn(II) system in several azide aqueous buffers solutions: 1.0 x 10(-2) mol 1(-1) HN(3), (0.50-2.0 mol 1(-1)) N(-)(3) and 5.0 x 10(-2) mol 1(-1) Mn(II) and constant ionic strength 2.0 mol 1(-1), kept with sodium perchlorate, leads to the conditional potential, E(0')x, in several azide concentrations at 25.0 +/- 0.1 degrees C. Considering the overall formation constants of Mn(II) N (-)(3), from former studies, and the potential, E(0')s = 1.063 V versus SCE, for Mn(III) Mn(II) system in non-complexing media, it was possible to calculate the Fronaeus function, F(0)(L), and the following overall formation constants: beta(1) = 1.2 x 10(5) M(-1), beta(2) = 6.0 x 10(8) M(-2), beta(3) = (2.4 +/- 0.7) x 10(11) M(-3), beta(4) = (1.5 +/- 0.5) x 10(11) M(-4) and beta(5) = (9.6 +/- 0.8) x 10(11) M(-5) for the Mn(III) N (-)(3) complexes. These data give important support to understand the importance of Mn(II) and Mn(III) synergistic effect on the analytical method of S(IV) determination based on the Co(II) autoxidation.     

Separation of inorganic anions in acidic solution by capillary electrophoresis

Inorganic anions are almost always determined by capillary electrophoresis (CE) at an alkaline pH, so the analytes will be fully ionized. However, a long-chain quaternary ammonium salt usually must be added as a flow modifier to the carrier electrolyte to reverse the direction of the electroosmotic flow. By working at a sufficiently acidic pH, the electroosmotic flow in fused-silica capillaries is virtually eliminated, and anions can be separated simply by differences in their electrophoretic mobilities. Excellent separations were obtained for AuCl₄⁻ and the chloro complexes of platinum group elements in HCl solution at pH 2.0 to 2.4. No additional buffer or flow modifier was needed. This CE technique is an excellent way to follow slow hydrolytic reactions in which one or more of the chloride ligands is replaced by water. Sharp peaks and good separations were also obtained for MnO₄⁻, VO₃⁻, chromate, molybdate, ferrocyanide, ferricyanide and stable complex ions such as chromium oxalate (CrO₃³⁻).     

Kinetics and mechanism of the reaction between chromium(III) and picolinic acid in weak acidic aqueous solution

Abstract  

The interaction between chromium(III) and picolinic acid in weak acid aqueous solution was studied, resulting in the formation of a complex upon substitution of water molecules in the chromium(III) coordination sphere. Experimental results show that the reaction takes place in multiple steps. The first step is the formation of an ion pair, the second step (two consecutive steps) is the slow one corresponding to substitution of the first water molecule from the chromium aqueous complex coordination sphere by a picolinic acid molecule via oxygen atom of the carboxylic acid group and substitution of the second water molecule via nitrogen of the pyridine ring forming an 1:1 complex. Both consecutive steps were independent of chromium concentration. The rate constants of the 1st and 2nd consecutive steps were increased by increasing picolinic acid concentration. The corresponding activation parameters are ∆H _1obs ^* = 28.4 ± 4 kJ mol⁻¹, ∆S _1obs ^* = −202 ± 26 J K⁻¹ mol⁻¹, ∆H _2obs ^* = 39.6 ± 5 kJ mol⁻¹, and ∆S _2obs ^* = −175 ± 19 J K⁻¹ mol⁻¹. The third step is fast, corresponding to formation of the final complex [Cr(pic)₃]. The logarithms of the formation constants of 1:1 and 1:3 complexes were found to be 1.724 and 4.274, respectively.     

Molecular structure and microwave spectra of isotopic chloro-, bromo-, and iodocyanoacetylene

The microwave spectra of the halogeno-cyanoacetylenes, X-CC-CN (X = ¹²⁷I, ⁸¹Br, ⁷⁹Br, ³⁷Cl, ³⁵Cl), have been investigated. The molecules were found to be linear. The vibration-rotation constants of the three bending vibrations and the lower stretching vibration were determined. Lines belonging to the monosubstituted ¹³C and ¹⁵N species in their natural abundances were measured and the rotational constants obtained. The bond distances based on the substitution coordinates were: for I-CC-CN r(I-C) = 1.984₆ Å, r(CC) = 1.207_o Å, r(C-C) = 1.370₂ Å, r(CN) = l.l60₄ Å; for Br-CC-CN, r(Br-C) = 1.785₈ Å, r(CC) = 1.204₁ Å, r(C-C) = 1.369₉ Å, r(CN) = 1.159₃ Å; and for C1-CC-CN, r(Cl-C) = 1.624₅ Å, r(CC) = 1.209_o Å, r(C-C) = 1.369_o Å, r(CN) = 1.160₂ Å.     

A photoelectron study (HeI,HeII) of the tautomeric equilibrium of chloro- and bromo-1,2,4-triazoles

Photoelectron spectroscopy HeI,HeII and quantum mechanical calculations (STO-3G) were used to analyze the electronic structure of tautomers of 1,2,4-triazole and its halogenated derivatives.The photoelectron spectra of the title compounds compared to those of fixed structure models demonstrated that 3-chloro and 5-bromo-1,2,4-(1H)-triazole exist in the vapor phase.     

Removal of aqueous As(III) and As(V) by hydrous titanium dioxide

Dissolved arsenic in drinking water is a global concern as it causes serious health problems. The purpose of this research was to study the applicability of an industrial intermediate product, a mixture of titanium hydroxide and titanium dioxide for removing aqueous arsenic. The material is common, inexpensive, and non-toxic, making it an attractive choice for drinking water purification. The kinetics and equilibrium of removing both primary inorganic arsenic forms, As(III) and As(V), were studied by separate batch experiments. The tested material functioned well in removing both of these arsenic forms. The apparent values for Langmuir monolayer sorption capacities were 31.8 mg/g for As(III) and 33.4 mg/g for As(V) at pH 4. The studied TiO(2) performed the best in acidic conditions, but also reasonably well in other pH conditions.     

Interaction of palladium(II) with DL-selenamethionine in acidic aqueous solution

Summary The interaction of Pd^II with DL-selenamethionine (SeMet) in acidic aqueous solution was investigated. SeMet was found to act as a bidentate ligand, forming a stable complex with Pd^II. Binding of the metal ion to the selenoether group creates a new chiral centre, which generates two sets of¹H and¹³C n.m.r. methyl resonances for the two diastereoisomers. The²J values for (⁷⁷Se–Me) decreased upon complex formation.     

Kinetics of oxidation of manganese(II) by peroxomonosulfuric acid in aqueous acidic solution

Summary Oxidation of Mn _aq ²⁺ by HSO ₅ ^– in acetate buffer to manganese(IV) is autocatalytic, and obeys a rate expression of the general form -d[Mn^II]/dt = k₀[Mn^II] + k₁[Mn^II][MnO_x]. The first-order (k₀) and heterogenetic (k₁) rate constants show first-order dependences on [HSO ₅ ^– ] and on 1/[H⁺]. The reaction is catalyzed by the addition of the chelating ligand glycine; k₁ shows a first-order dependence on [glycine] at a fixed pH. This catalysis is ascribed to complexation, whereby the redox potential for Mn(gly) _n ^(2–n)+ is lower than that for Mn _aq ²⁺ , facilitating oxidation. The stoichiometry of the reaction is Mn²⁺: HSO ₅ ^– = 11, and the manganese(IV) oxide formed is of battery-active grade. Purity of the recovered product is not affected by the presence of high concentrations of natural sugars in the initial solution.     

Inner-sphere oxidation of cis-diaquabis(oxalato)chromate(III) by periodate in aqueous weakly acidic solutions

The kinetics of oxidation of cis-[Cr^III(ox)₂(H₂O)₂]^– (ox = C₂O₄ ^2–) by IO₄ ^– showed a first-order dependence on the initial Cr^III complex concentration in the presence of a vast excess of [IO₄ ^–]. The dependence of the pseudo-first-order rate constant on [IO₄ ^–] is complex and is consistent with the formation of a precursor complex. It is proposed that this complex is formed through the coordination of the two carbonyl oxygens of the ox ligand with the IO₄ ^– ion, forming a cyclic intermediate. The kinetics are consistent with the hydroxo form of the Cr^III complex being the reactive species, whereas the aqua species forms an unreactive complex.     

Extraction of bismuth(III) with 2-bromoalkanoic acid in nondonating solvent from highly acidic aqueous solution.

The extraction behaviors of bismuth(III) with carboxylic acid (HL), which have not yet been clearly elucidated, because of the precipitation of hydroxide, were studied using the 2-bromoalkanoic acid in benzene and in hexane systems under aqueous conditions of high acidity at I = 1.0 M ((H,Li)NO3). The extraction equilibria were analyzed based on the-initial concentration of nitric acid and the concentration of bismuth(III) extracted in the organic phase. The extracted species and the logarithmic values of the extraction constant (log Kex) were found to be a single species of BiL3(HL)3 for the systems of 2-bromooctanoic acid/benzene (log Kex = -1.66) and 2-bromohexadecanoic acid/benzene (-1.58), and to be two species of BiL3(HL)4 (-1.01) and Bi3L9HL (-1.62) for the system of 2-bromooctanoic acid/hexane, where the monomer was dominant at a higher reagent concentration.     

The structure and synthesis of plutonium(III) chlorides from aqueous solution

The preparation and structure of three trivalent plutonium chloride compounds from aqueous solution is reported. Two of the three are plutonium tetraaquatetrachloro complexes exhibiting a cis and a trans arrangement of Cl about the Pu. The identification of the coordination number of 4 with respect to Cl and the isomerism are both unprecedented in actinide solution chemistry. The third complex is a hexaaquadichloro complex of Pu(III), predicted by available thermodynamic data.