Carbon nanotube array-based biosensor

Aligned multi-wall carbon nanotubes (MWNT) grown on platinum substrate are used for the development of an amperometric biosensor. The opening and functionalization by oxidation of the nanotube array allows for the efficient immobilization of the model enzyme, glucose oxidase. The carboxylated open-ends of nanotubes are used for the immobilization of the enzymes, while the platinum substrate provides the direct transduction platform for signal monitoring. It is also shown that carbon nanotubes can play a dual role, both as immobilization matrices and as mediators, allowing for the development of a third generation of biosensor systems, with good overall analytical characteristics.     

Wireless biosensor system for real-time cholesterol monitoring in fish “Nile tilapia”

The rapidly increasing demand for cultured fish as a food resource requires simple, effective methods for controlling fish health in culture conditions. Plasma total cholesterol levels are significantly related to fish mortality following bacterial challenge, and are thus a good indicator of the general health of fish. We developed a wireless biosensor system to continuously monitor the total cholesterol concentration in fish (Nile tilapia, Oreochromis niloticus). The biosensor was constructed with Pt-Ir wire (φ0.178 mm) as the working electrode and Ag/AgCl paste as the reference electrode. Cholesterol oxidase and cholesterol esterase were immobilized on the working electrode using glutaraldehyde. The sensor output was linear and strongly correlated with the cholesterol level (R = 0.9970) in the range of 2.65-403 mg dl⁻¹. This range covers the range of total cholesterol levels in fish. To avoid blood coagulation and proteins coalescing on the sensor, we implanted the sensor in the fluid under the scleral surface of the eyeball (EISF). The EISF is presumed to reflect the levels of most blood components and does not include the substances contained in blood that inhibit sensor measurement. Total cholesterol concentrations in blood and EISF were strongly correlated (R = 0.8818, n = 72) in the blood total cholesterol range of 74-480 mg dl⁻¹. Therefore, we used EISF as an alternative to blood and performed continuous in vivo-monitoring of the total cholesterol concentration in fish. We also investigated the application of the calibration method and wireless monitoring system. These applications enabled us to securely monitor total cholesterol levels in free-swimming fish in an aquarium for over 40 h. Thus, our newly developed sensor provided a rapid and convenient method for real-time monitoring of total cholesterol concentrations in free-swimming fish.     

Carbon nanotube field effect transistor biosensor for the detection of toxins in seawater

Disposable field effect transistors (FET) biosensors (bio-FET) based on carbon nanotubes were fabricated for detection of domoic acid (DA), which belongs to the group of biotoxins associated with the amnesic shellfish poisoning. The analytical results obtained with the bio-FET were compared with those obtained with a traditional methodology (enzyme-linked immunosorbent assay) in order to validate the bio-FET for DA detection. Standard solutions of DA with concentrations between 10 and 500 ng L^?1 were tested in order to construct the calibration curve, where five bio-FET were used for reproducibility estimation and two analytical measurements were performed for each bio-FET for repeatability estimation. Ten spiked artificial seawater samples were used to validate the bio-FET. The obtained reproducibility (0.52–1.43%), repeatability (0.57–1.27%), limit of detection (10 ng L^?1) and recovery range (92.3–100.3%) reveal an adequate analytical performance of the bio-FET for the detection of DA in environmental samples such as seawater samples.     

Biosensor system for continuous glucose monitoring in fish

A biosensor system was developed for continuous estimation of blood glucose in fish. Because it is difficult to measure blood components in real-time due to decreased sensor output resulting from blood coagulation and coalescing blood proteins at the sensor placement site, we used the eyeball scleral interstitial fluid (EISF) as the site of sensor implantation. Evaluation of the relationship between EISF and blood glucose concentrations revealed that the blood glucose concentration correlated closely with the EISF glucose concentration (y = 2.2996 + 0.9438x, R = 0.960, n = 112). To take advantage of the close correlation between blood and EISF glucose, we prepared a needle-type enzyme sensor for implantation in the fish sclera using a flexible wire electrode. The sensor provided a rapid response, good linearity, and reproducibility. Continuous glucose monitoring could be carried out by implanting this needle-type glucose sensor onto the eye. The findings indicated that the glucose concentration increased with sensor output current over time, and that changes in the blood glucose were continuously reflected in the EISF. The glucose concentration was estimated based on the one-point or two-point calibration methods. The two-point calibration method yielded the most accurate glucose monitoring (blood glucose range of 70-420 mg dL⁻¹) over 160 min. Sensor-estimated glucose and whole blood glucose values were highly correlated (y = 0.4401 + 0.8656x, R = 0.958).     

Size dependence of SiO2 particles enhanced glucose biosensor

A wide size range of SiO₂ particles were synthesized and were used as enzyme immobilization carriers to fabricate glucose biosensors. The size of the particles was in the range of 17-520 nm. These biosensors could be operated under physiological conditions (0.1 M phosphate buffer, pH 7.2). Particle size could affect the performance of SiO₂ modified glucose biosensors drastically. The smaller particles had higher performance. The smallest SiO₂ modified biosensor could work well in the glucose concentration range of 0.02-10 mM with a correlation coefficient of 0.9993. Its sensitivity was 2.08 μA/mM and the detection limit was 1.5 μM glucose.     

A novel reagentless glutamate microband biosensor for real-time cell toxicity monitoring

A reagentless glutamate biosensor was applied to the determination of glutamate released from liver hepatocellular carcinoma cells (HepG2) in response to toxic challenge from various concentrations of paracetamol. A screen printed carbon electrode (SPCE) containing the electrocatalyst Meldola's Blue (MB-SPCE) served as the electron mediator for the oxidation of NADH.     

Carbon nanotube immobilized polar membranes for enhanced extraction of polar analytes

We demonstrate for the first time that carbon nanotubes (CNTs) can be readily immobilized on the surface of a solid polymeric membrane which can lead to enhanced enrichment factor and extraction efficiency. The effectiveness of the CNT mediated process is demonstrated by micro-scale membrane extraction via direct solvent enrichment of polar and nonpolar organics. The enrichment factor measured as the ratio of concentrations in the acceptor to the donor phases was as high as 282 and the enhancement over the unmodified membrane was as much as 92%. In addition, the solvent retention in the carbon nanotube immobilized membrane (CNIM) increased by as much as 29%. Overall, the CNT incorporation provided enhanced solute transport and thus led to overall performance enhancement.     

Subcutaneous microdialysis probe coupled with glucose biosensor for in vivo continuous monitoring

Microdialysis probes have been tested to evaluate the influence of flow-rate, probe dimensions and temperature when used as sampling systems inserted subcutaneously for in vivo monitoring of glucose. The probe was coupled with a glucose biosensor obtained from a thin layer electrochemical cell generally used as detector for liquid chromatography. Glucose oxidase was immobilized on a nylon net membrane and it was placed over an acetate cellulose membrane into the cell in contact with the platinum anode.     

Carbon nanotube enhanced membrane distillation for online preconcentration of trace pharmaceuticals in polar solvents

Carbon nanotube enhanced membrane distillation (MD) is presented as a novel, online analytical preconcentration method for removing polar solvents thereby concentrating the analytes, making this technique an alternate to conventional thermal evaporation. In a carbon nanotube immobilized membrane (CNIM), the CNTs serve as sorbent sites and provide additional pathways for enhanced solvent vapor transport, thus enhancing preconcentration. Enrichment using CNIM doubled compared to membranes without CNTs, while the methanol flux and mass transfer coefficients increased by 61% and 519% respectively. The carbon nanotube enhanced MD process showed excellent precision (RSD of 3-5%), linearity, and the detection limits were in the range of 0.001 to 0.009 mg L(-1) by HPLC analysis.     

Glucose biosensor based on glucose oxidase immobilized on unhybridized titanium dioxide nanotube arrays

A glucose biosensor has been fabricated by immobilizing glucose oxidase (GOx) on unhybridized titanium dioxide nanotube arrays using an optimized cross-linking technique. The TiO₂ nanotube arrays were synthesized directly on a titanium substrate by anodic oxidation. The structure and morphology of electrode material were characterized by X-ray diffraction and scanning electron microscopy. The electrochemical performances of the glucose biosensor were conducted by cyclic voltammetry and chronoamperometry measurements. It gives a linear response to glucose in the 0.05 to 0.65 mM concentration range, with a correlation coefficient of 0.9981, a sensitivity of 199.6 μA mM^?1 cm^?2, and a detection limit as low as 3.8 µM. This glucose biosensor exhibited high selectivity for glucose determination in the presence of ascorbic acid, sucrose and other common interfering substances. This glucose biosensor also performed good reproducibility and long-time storage stability. This optimized cross-linking technique could open a new avenue for other enzyme biosensors fabrication.

Soft contact lens biosensor for in situ monitoring of tear glucose as non-invasive blood sugar assessment

A contact lens (CL) biosensor for in situ monitoring of tear glucose was fabricated and tested. Biocompatible 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer and polydimethyl siloxane (PDMS) were employed as the biosensor material. The biosensor consists of a flexible Pt working electrode and a Ag/AgCl reference/counter electrode, which were formed by micro-electro-mechanical systems (MEMS) technique. The electrode at the sensing region was modified with glucose oxidase (GOD). The CL biosensor showed a good relationship between the output current and glucose concentration in a range of 0.03-5.0 mM, with a correlation coefficient of 0.999. The calibration range covered the reported tear glucose concentrations in normal and diabetic patients. Also, the CL biosensor was applied to a rabbit for the purpose of tear glucose monitoring. The basal tear glucose was estimated to 0.11 mM. Also, the change of tear glucose induced by the change of blood sugar level was assessed by the oral glucose tolerance test. As a result, tear glucose level increased with a delay of 10 min from blood sugar level. The result showed that the CL biosensor is expected to provide further detailed information about the relationship between dynamics of blood glucose and tear glucose.     

Amperometric glucose biosensor based on electrodeposition of platinum nanoparticles onto covalently immobilized carbon nanotube electrode

A new amperometric biosensor for glucose was developed based on adsorption of glucose oxidase (GOx) at the gold and platinum nanoparticles-modified carbon nanotube (CNT) electrode. CNTs were covalently immobilized on gold electrode via carbodiimide chemistry by forming amide linkages between carboxylic acid groups on the CNTs and amine residues of cysteamine self-assembled monolayer (SAM). The fabricated GOx/Au_nano/Pt_nano/CNT electrode was covered with a thin layer of Nafion to avoid the loss of GOx in determination and to improve the anti-interferent ability. The immobilization of CNTs on the gold electrode was characterized by quartz crystal microbalance technique. The morphologies of the CNT/gold and Pt_nano/CNT/gold electrodes have been investigated by scanning electron microscopy (SEM), and the electrochemical performance of the gold, CNT/gold, Pt_nano/gold and Pt_nano/CNT/gold electrodes has also been studied by amperometric method. In addition, effects of electrodeposition time of Pt nanoparticles, pH value, applied potential and electroactive interferents on the amperometric response of the sensor were discussed.

The enzyme electrode exhibited excellent electrocatalytic activity and rapid response for glucose in the absence of a mediator. The linear range was from 0.5 to 17.5 mM with correction coefficient of 0.996. The biosensor had good reproducibility and stability for the determination of glucose.     

Integrated biosensor for glucose and galactose

A glucose microsensor based on quinoprotein glucose dehydrogenase (GDH) and electron mediators is described. It is unaffected by the concentration of dissolved oxygen. Its calibration graph is linear below 10 mg dl ^?1. The insensitivity to oxygen arises because the concentration of the oxidized forms of the mediators is insufficient to oxidize the reduced form of GDH. An integrated microsensor for glucose and galactose based on GHD and galactose oxidase was constructed. Glucose and galactose concentrations were determined from the current increase due to oxidation of the mediators or the current decrease due to reduction of oxygen.     

Microfluidic devices with disposable enzyme electrode for electrochemical monitoring of glucose concentrations

This article describes the fabrication of tube-like microchannels made of UV curable polymer on a glass substrate and the device assembling with a disposable enzyme-working electrode for high-sensitivity electrochemical detection. While both reference and counter electrodes are patterned on the surface of the glass substrate, the working electrode is flipped on the top of the channel with an open access, providing a face-to-face probing configuration. When the enzyme electrode is contaminated or degraded, it can be easily replaced by a new one, keeping the main body of the device and the detection schema unchanged. Using glucose oxidase-coated gold electrodes, we were able to determine a linear amperometry response to the glucose concentrations in the range of 2-16 mM. By replacing the as-prepared working electrode by the one after thermal treatments, we showed a much more degraded enzyme electrode activity, enabling efficient determination of the electrode quality as well as the whole process optimization.     

Recent advances in biosensor techniques for environmental monitoring

Biosensors for environmental applications continue to show advances and improvements in areas such as sensitivity, selectivity and simplicity. In addition to detecting and measuring specific compounds or compound classes such as pesticides, hazardous industrial chemicals, toxic metals, and pathogenic bacteria, biosensors and bioanalytical assays have been designed to measure biological effects such as cytotoxicity, genotoxicity, biological oxygen demand, pathogenic bacteria, and endocrine disruption effects. This article is intended to discuss recent advances in the area of biosensors for environmental applications.     

Carbon nanotube transistors for biosensing applications

Electronic detection of biomolecules, although still in its early stages, is gradually emerging as an effective alternative to optical detection methods. We describe field effect transistor devices with carbon nanotube conducting channels that have been developed and used for biosensing and biodetection. Both transistors with single carbon nanotube conducting channels and devices with nanotube network conducting channels have been fabricated and their electronic characteristics examined. The devices readily respond to changes in the environment, and such effects have been examined using gas molecules and coatings with specific properties. Device operation in (conducting) buffer and in a dry environment--after buffer removal--is also discussed. Applications in the biosensing area are illustrated with three examples: the investigation of the interaction between devices and biomolecules, the electronic monitoring of biomolecular processes, and attempts to integrate cell membranes with active electronic devices.     

Improved biosensor for glucose based on glucose oxidase-immobilized silk fibroin membrane

Based on glucose oxidase-immobilized silk fibroin membrane and oxygen electrode, the authors have developed an amperometric glucose sensor in flow-injection analysis. After the sensor was improved by the configuration of oxygen electrode and a temperature control system was added to the electrode body, its sensitivity, analytical precision, and stability were enhanced greatly. The authors first introduced a tailing inhibitor-ion pair reagent into a buffer system in the biosensor so as to eliminate all interference from hemacyte, macromolecules, and small mol wt charged species besides electroactive specie ascorbate in complex matrices. A considerably serious tailing of the biosamples, such as whole blood, plasma, serum, or urine on the sensor, based on enzyme electrode, entirely disappeared, their response times were shortened, and base lines became more smooth and stable. The glucose sensor has a broad range of linear response for glucose (up to 25.0 mmol/L) and a good correlation (γ = 0.999) under conditions of control temperature 32.0°C and 1.6 mL/min 0.02 mol/L phosphate buffer containing 0.5% tailing inhibitor (v/v). Recoveries of glucose in these biosamples are within the range of 93.71–105.88%, and its repeatabilities for determining glucose, repeated 100 times, human blood dilution 125 times, and serum 128 times, are 1.81,2.48, and 2.91% (RSD), respectively. The correlation analysis for 200 serum samples showed that the correlation (γ) is 0.9934 between the glucose sensor and Worthington method for determining serum glucose used conventionally in a hospital laboratory. Moreover, the enzyme membrane used in the biosensor can be stored for a long time (over 2 yr) and measured repeatedly over 1000 times for biosamples. The glucose sensor is capable of detecting over 60 biosamples/hr.     

A nano-functionalized real-time electrochemiluminescent biosensor for alanine transaminase assay

An electrochemiluminescent (ECL) biosensor was constructed for selective assay of alanine aminotransferase (ALT) based on the enzymatically catalyzed oxidation of pyruvate by pyruvate oxidase (PYOD). The composite of potassium ferricyanide and carbon nanotube was adopted to pre-functionalize the basal platinum electrode while the potassium ferricyanide acted as the activator of PYOD. The ALT catalyzed the reaction of L-alanine and-ketoglutarate to produce pyruvate which could be further enzymatically oxidiz...