Effect of TiO2 nanostructure morphology on the performance of a photoelectrochemical cell of ITO/TiO2/electrolyte/platinum

The morphology of photovoltaic material is able to influence of the performance of photoelectrochemical cell. Polyvinylpyrrolidone (PVP), cetyltrimethylammonium bromide (CTAB), and hexamethylenetetramine (HMT) surfactant were used to modify the morphology nanostructure of TiO₂ films by a simple technique, namely, liquid phase deposition during their growth process. It was found that the untreated surfactant TiO₂ film produces the morphology with the mixture nanosphere and nanoflower. The film treated with PVP, CTAB, and HMT produce the nanostructure shape of nanoflower, nanowire, and nanorod, respectively. These TiO₂ samples were utilized as photovoltaic materials in a photoelectrochemical cell of ITO/TiO₂/electrolyte/platinum. It was found that the photovoltaic parameters such as short-circuit current density (J _sc), open-circuit voltage (V _oc) and fill factor are influenced by the morphology in terms of shape and particle size of the TiO₂ nanostructure. The cell utilizing the TiO₂ nanowire treated with PVP possesses the highest J _sc and V _oc of 0.100 mAcm^?2 and 0.44 V. The length of the TiO₂ nanowire is 6?±?2 nm, while the cell with the untreated surfactant TiO₂ sample demonstrates the lowest performance. It was also found that the J _sc and V _oc increase with the decrease in the length of the TiO₂ nanostructures. The smallest length of TiO₂ possesses the best interfacial contact at TiO₂/electrolyte containing iodide/triiodide redox couple. Thus, the redox reaction is optimized at this interface.     

Effect of hexamethylenetetramines (HMT) surfactant concentration on the performance of TiO2 nanostructure photoelectrochemical cells

Hexamethylenetetramine (HMT) surfactant was used to modify the morphology of TiO₂ thin film nanostructure prepared by a simple technique, namely, liquid phase deposition (LPD) during its growth process. In order to obtain various surface morphologies of TiO₂ nanostructures, the concentration of HMT was varied from 10 to 100 mM. It was found that with an increase in concentration of HMT, the morphology of TiO₂ nanorod in term of its grain size decreases due to the particles agglomeration grown on the surface. The TiO₂ nanostructures with various grain sizes were utilized as photovoltaic materials in photoelectrochemical cell measurement. The highest performance of the cell in terms of the short-circuit current density, J _sc was 0.069 mA cm^?2. This result was achieved from the TiO₂ nanorod cell with the smallest grain size, 12 ± 2 nm. The J _sc of the cell increased with concentration of HMT. The cell utilizing the TiO₂ nanostructure with the smallest grain size possessed the best interfacial contact at the TiO₂/electrolyte containing iodide/triiodide redox couple. Thus, the redox reaction was optimised at this interface.     

Hydrothermal synthesis of TiO2 nanorods: formation chemistry,growth mechanism,and tailoring of surface properties for photocatalytic activities

Titanium dioxide (TiO₂) is one of the best semiconductor photocatalysts with optical band gap of 3.2 eV. The optical band gap and photocatalytic properties could be further tuned by tailoring shape, size, composition, and morphology of the nanostructures. Hydrothermal synthesis methods have been applied to produce well-controlled nanostructured TiO₂ materials with different morphologies and improved optoelectronic properties. Among various morphologies, one-dimensional (1D) TiO₂ nanostructures are of great importance in the field of energy, environmental, and biomedical because of the directional transmission properties resulting from their 1D geometry. Particularly, TiO₂ nanorods (NRs) have gained special attention because of their densely packed structure, quantum confinement effect, high aspect ratio, and large specific surface area that could specially improve the directional charge transmission efficiency. This results in the effective photogenerated charge separation and light absorption, which are really important for potential applications of TiO₂-based materials for photocatalytic and other important applications. In this review, hydrothermal syntheses of TiO₂ NRs including the formation chemistry and the growth mechanism of NRs under different chemical environments and effects of various synthesis parameters (pH, reaction temperature, reaction time, precursors, solvents etc.) on morphology and optoelectronic properties have been discussed. Recent developments in the hydrothermal synthesis of TiO₂ NRs and tailoring of their surface properties through various modification strategies such as defect creation, doping, sensitization, surface coating, and heterojunction formation with various functional nanomaterials (plasmonic, oxide, quantum dots, graphene-based nanomaterials, etc.) have been reported to improve the photocatalytic activities. Furthermore, applications of TiO₂ NRs/tailored TiO₂ NRs as superior photocatalysts in degradation of organic pollutants and bacterial disinfection have been discussed with emphasis on mechanisms of action and recent advances in the fields.     

Photoinduced hydrophilic and photocatalytic response of hydrothermally grown TiO2 nanostructured thin films

It is demonstrated that nanostructured titanium (IV) oxide (TiO₂) films can be deposited on glass substrates at 95 °C using hydrothermal growth, their properties being greatly affected by the substrate materials. Anatase TiO₂ films grown on ITO for deposition period of 50 h were observed to exhibit a very efficient, reversible light-induced transition to super-hydrophilicity, reaching a nearly zero contact angle. Enhanced photocatalytic activity (65%) was found for the rutile TiO₂ samples grown on microscope glass, possibly due to their higher roughness with respect to anatase grown on ITO. The effect of the substrate material used is discussed in terms of the TiO₂ phase and morphology control, for the best photoinduced hydrophilic and photocatalytic performance of the samples.     

固态光电催化器件 ITO/TiO2/ITO 的构型和机制

 采用浸渍-提拉法将 TiO₂ 薄膜负载在具有一定电极构型的氧化铟锡 (ITO) 基底上, 制备了全固态 TiO₂ 平面型器件 (ITO/TiO₂/ITO). 采用扫描电镜对器件的表面形貌和膜厚进行了表征. 以紫外光下器件光电协同催化降解罗丹明 B(RhB) 为模型反应, 考察了器件的构型和空穴捕获剂 (乙醇) 对其光电催化性能的影响. 结果表明, 初始浓度为 10 mg/L 的 RhB 在 1.5 V 偏压和 NaCl (1.5 mol/L) 为电解质的条件下, 光照 60 min 脱色率达到 83%; 阳极面积较大的器件光电催化性能较好, 刻蚀宽度为 2 mm 时光电催化活性最高; 空穴与 TiO₂表面吸附的 H₂O 氧化生成的羟基自由基对液相光电催化降解 RhB 起着重要作用.     

Green Synthesis and Applications of ZnO and TiO2 Nanostructures

Over the last two decades, oxide nanostructures have been continuously evaluated and used in many technological applications. The advancement of the controlled synthesis approach to design desired morphology is a fundamental key to the discipline of material science and nanotechnology. These nanostructures can be prepared via different physical and chemical methods; however, a green and ecofriendly synthesis approach is a promising way to produce these nanostructures with desired properties with less risk of hazardous chemicals. In this regard, ZnO and TiO₂ nanostructures are prominent candidates for various applications. Moreover, they are more efficient, non-toxic, and cost-effective. This review mainly focuses on the recent state-of-the-art advancements in the green synthesis approach for ZnO and TiO₂ nanostructures and their applications. The first section summarizes the green synthesis approach to synthesize ZnO and TiO₂ nanostructures via different routes such as solvothermal, hydrothermal, co-precipitation, and sol-gel using biological systems that are based on the principles of green chemistry. The second section demonstrates the application of ZnO and TiO₂ nanostructures. The review also discusses the problems and future perspectives of green synthesis methods and the related issues posed and overlooked by the scientific community on the green approach to nanostructure oxides.     

Electrochromic properties of sputtered TiO2 thin films

TiO₂ thin films were deposited on ITO/Glass substrates by the rf magnetron sputtering in this study. The electrochromic properties of TiO₂ films were investigated using cyclic voltammograms (CV), which were carried out on TiO₂ films immersed in an electrolyte of 1 M LiClO₄ in propylene carbonate (PC). As- deposited TiO₂ thin film was amorphous, while the films post-annealed at 300~600°C contained crystallized anatase and rutile. With the increase of the annealing temperature, the surface roughness of film increased from 1.232 nm to 1.950 nm. Experimental results reveal that the processing parameters of TiO₂ thin films will influence the electrochromic properties such as transmittance, ion-storage capacity, inserted charge, optical density change, coloration efficiency and insertion coefficient.     

Photocatalytic Degradation of Glyphosate in Water by N‐Doped SnO2/TiO2 Thin‐Film‐Coated Glass Fibers

Photocatalytic degradation of glyphosate contaminated in water was investigated. The N‐doped SnO₂/TiO₂ films were prepared via sol–gel method, and coated on glass fibers by dipping method. The effects of nitrogen doping on coating morphology, physical properties and glyphosate degradation rates were experimentally determined. Main variable was the concentration of nitrogen doping in range 0–40 mol%. Nitrogen doping results in shifting the absorption wavelengths and narrowing the band gap energy those lead to enhancement of photocatalytic performance. The near optimal 20N/SnO₂/TiO₂ composite thin film exhibited about two‐ and four‐folds of glyphosate degradation rates compared to the undoped SnO₂/TiO₂ and TiO₂ films when photocatalytic treatment were performed under UV and solar irradiations, respectively, due to its narrowest band gap energy (optical absorption wavelength shifting to visible light region) and smallest crystallite size influenced by N‐doping.     

Dye-Sensitized Solar Cell Utilizing TiO<Subscript>2</Subscript> Nanostructure Films: Effect of Synthesis Temperature

This paper is concerned with a study of the influence of synthesis temperature on the properties of TiO₂ films and the performance of dye-sensitized solar cell (DSSC). The TiO₂ film samples synthesized via liquid phase deposition for 5 h at various temperatures, namely, 40, 50, 60, 70 and 80°C. It was found that the morphological shape of the film changes with growth temperature. The optical absorption increases with growth temperature. However, the photoluminescence decreases with growth temperature. These TiO₂ samples were applied in a DSSC of ITO/TiO₂/electrolyte/platinum. The DSSC utilizing the sample grown at 40°C demonstrated the highest photovoltaic parameters with the J_sc, and η of 1.40 mA cm^–2 and 0.44% respectively. This is due to the smallest grain size of TiO₂ films and the smallest bulk resistance of the device.     

A novel approach for the synthesis of visible-light-active nanocrystalline N-doped TiO2 photocatalytic hydrosol

A visible-light-active nitrogen doped nanocrystalline titanium dioxide (N–TiO₂) hydrosol was prepared by precipitation–peptization method and following with hydrothermal crystallization at 110 °C holding for 6 h. XPS results show that nitrogen ions have been doped into the TiO₂ lattice successfully and the UV–Vis absorption spectra indicate that the light absorption edge of the N-doped TiO₂ has been red-shifted into visible light region. The photocatalytic performance of the N-doped TiO₂ thin film prepared from the synthesized hydrosol was evaluated by photodegrading the gaseous formaldehyde (HCHO) under visible light irradiation. The photodegradation ratio of HCHO reached up to 90% within 24 h and the degradation ratio was stable for ten degradation cycles, indicating the prepared hydrosol has good reusable performance in photodegrading gaseous pollutants.     

Relation between Morphology and Photoelectrochemical Performance of TiO2 Nanotubes Arrays Grown in Ethylene Glycol/Water

The TiO₂ nanotube films were prepared by anodizing Ti plates in 0.2 M NH₄F ethylene glycol/10% H₂O under different formation voltages keeping fixed the time length, or by keeping fixed the formation voltage and varying the time length. The morphology of the TiO₂ film obtained was observed by SEM images and different morphological parameters were derived from them. Furthermore, the optical and semiconducting properties of TiO₂ films were also measured. The photoelectrochemical performance toward water oxidation of the TiO₂ only showed to be dependent with the inner diameter of the nanotubes, that could be related to the interaction of the film with the light and the transport of species in the electrolyte inward or outward the film.     

Synthesis,structural and electrical characterization of PbS NCs in titania sol–gel films

Nanocrystals of lead sulfide were grown in TiO₂ (titania) thin films prepared by a sol-gel process. The synthetic procedure as well as the structural, optical, and electrical properties of the films are demonstrated. The structures and morphology of PbS nanocrystals were analyzed using HRTEM, SAED, AFM, HRSEM, XRD and EDAX elemental analysis technique. When the concentration of PbS in the titania matrix is 20 mol%, PbS NCs with a diameter of 2.0 nm are created. At a higher PbS concentration (> 40 mole%) in the titania matrix, PbS NCs and PbS clusters are created not only within the TiO₂ film but also on the external surface of the TiO₂ film. By increasing the PbS concentration up to 50 mol%, PbS nanocrystals of 6–8 nm in diameter are formed within the titania film and PbS clusters with a base size of about 100 nm² and a height up to about 20 nm were self assembled on the external surface of TiO₂ film. Quantum size effect and band gap energies were obtained from shifts of the absorption edge. For electrical measurements, PbS–TiO₂ films were deposited on an ITO/glass substrate, and then covered with gold contact. The electrical properties of ITO/PbS NCs–TiO₂/Au and ITO/PbS NCs–TiO₂/PbS cluster/Au structures were studied. I–V characteristics of the one layer structure are nearly linear and symmetric, while those of the two-layer structure exhibit rectifying behavior.     

Atomic layer deposition of TiO2 nanotubes and its improved electrostatic capacitance

Titanium dioxide (TiO₂) nanotubes are fabricated into anodic aluminum oxide (AAO) membrane via atomic layer deposition (ALD). For the ALD of TiO₂, gaseous precursors, titanium (IV) isopropoxide and water are sequentially applied and chemically reacted with each other. A thickness of nanotubes is precisely controlled by the applied cycle numbers of ALD and the morphology of nanostructures is investigated by SEM and TEM. The amorphous property of TiO₂ nanostructures is revealed by XRD and the composition of nanotubes is measured by TEM–EDX. The impurity contents and binding structure of the nanostructures are analyzed by XPS. The electrostatic capacitance of TiO₂ nanotubes into AAO is 480 μF/cm² and it is about 3 times higher compared with AAO membrane (172 μF/cm²).     

Electrochemical deposition of nano-structured ZnO on the nanocrystalline TiO2 film and its characterization

One-dimensional structure of ZnO nanorod arrays on nanocrystalline TiO₂/ITO conductive glass substrates has been fabricated by cathodic reduction electrochemical deposition methods in the three-electrode system, with zinc nitrate aqueous solution as the electrolyte, and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and photoluminescence (PL) spectra. The effects of film substrates, electrolyte concentration, deposition time, and methenamine (HMT) addition on ZnO deposition and its luminescent property were investigated in detail. The results show that, compared with on the ITO glass substrate, ZnO is much easily achieved by electrochemical deposition on the TiO₂ nanoparticle thin films. ZnO is hexagonally structured wurtzite with the c-axis preferred growth, and further forms nanorod arrays vertically on the substrates. It is favorable to the growth of ZnO to extend the deposition time, to increase the electrolyte concentration, and to add a certain amount of HMT in the system, consequently improving the crystallinity and orientation of ZnO arrays. It is demonstrated that the obtained ZnO arrays with high crystallinity and good orientation display strong band-edge UV (375 nm) and weak surface-state-related green (520 nm) emission peaks.     

Application of sol–gel TiO2 film for an extended-gate H+ ion-sensitive field-effect transistor

In this study, a sol–gel TiO₂ thin film has been spin-coated on a commercial ITO glass substrate as the extended-gate field effect transistor (EGFET) for hydrogen ion sensing. The as-deposited films are further annealed at various temperatures (T_a) under ambient atmosphere. It is found that the bi-layer structure of TiO₂/ITO EGFET exhibits good linear sensitivity from pH 1 to 11. Anatase TiO₂ appeared as early as T_a = 200 °C and a brookite (121) diffraction evolved at T_a = 500 °C. No prominent influence on the surface fine structures could be found at higher T_a. Due to the reduction or disappearance of the surface hydroxyl groups on TiO₂, the sensitivities of the TiO₂/ITO pH-EGFET device are rapidly reduced. However, the influence of the conductivity decay for ITO substrates annealed at high T_a could not be excluded. A maximum sensitivity 61.44 mV/pH is achieved as T_a = 300 °C.The bi-layer structure of TiO₂/ITO exhibits better long-term stability than the traditional ITO sensing membranes. In addition, the asymmetric hysteresis is more significant in alkaline buffer solutions, which could be explained by a site-binding model because the diffusion of H⁺ ions into the buried sites of the sensing film is more rapid than that of OH⁻ ions.     

Synthesis of TiO2 hollow spheres using binary ionic liquids as an electrocatalyst

Titanium dioxide (TiO₂ titania) hollow sphere was simply synthesized using various ionic liquids (ILs). The shape and size of TiO₂ particles were significantly different with the composition of ILs. This is mainly attributed to the interaction between organic solvent and IL at the interface leading to the formation of sphere. Among the binary ILs, [Bmim][BF₄] + [Omim][PF₆], [Bmim][BF₄] + [Omim][PF₆], and [Bmim][PF₆] + [Hmim][PF₆] were useful to prepare TiO₂ nanostructures with high surface area and anatase phase. Especially, [Bmim][BF₄] + [Omim][PF₆] was the most effective IL to synthesize an anatase TiO₂ hollow sphere.

     

Partially nanowire-structured TiO2 electrode for dye-sensitized solar cells

Partially nanowire-structured TiO₂ was prepared by a hydrothermal processing followed by calcination in air. The hydrogen titanate powder as-synthesized was calcined at 300 °C for 4 h to obtain the partially nanowire-structured TiO₂. A dye-sensitized solar cell (DSC) with a film thickness of 5.6 μm, fabricated using the partially nanowire-structured TiO₂ showed better performance than using a fully nanowire-structured TiO₂ or a conventional equi-axed TiO₂ nanopowder. The short-circuit current density (J_SC), the open-circuit voltage (V_OC), the fill factor (FF) and the overall efficiency (η) are 11.9 mA/cm², 0.754 V, 0.673 and 6.01 %, respectively. The effects of one-dimensional nanostructure and electron expressway concept are discussed.     

Effect of organic dye on the performance of dye-sensitized solar cell utilizing TiO2 nanostructure films synthesized via CTAB-assisted liquid phase deposition technique

This work is concerned with the growth of TiO₂ nanostructures as photovoltaic materials of dyesensitized solar cell (DSSC) via phase liquid deposition technique treated with CTAB surfactant. This work investigates the influence of organic dyes, N719, N3 and Z907 as photosensitizer on the photovoltaic parameters of TiO₂ nanostructures dye-sensitized solar cells (DSSCs). It also highlights the effect of the concentration of the best dye, N719 on the performance of the cell. The platinum films as counter electrode of the DSSC were prepared by sputtering platinum pellet on ITO substrate. The redox couple of the electrolyte utilized in the DSSC was iodide/triiodide. The cell sensitized with N719 dye demonstrated the best performance compared with the cell sensitized with another two dyes, N3 and Z907. This is due to N719 dye possess the highest optical absorption in visible region. The cell sensitized with 0.8 mM N719 dye performs the highest short-circuit current density, J _sc and power conversion efficiency, η since it posses the highest absorption in visible region. The DSSC utilizing 0.8 mM N719 dye demonstrated the highest J _sc and η of 6.48 mA cm^?2 and 1.69%, respectively.     

In-situ preparation and electrochromic properties of TiO2/PTPA-HTAN core-shell nanocomposite film

A new star-shaped structure conjugated microporous polymers, poly (2,8,14-tri[4-diphenyl-benzene]-hexaazatrinaphthylene) (PTPA-HATN), was designed and in-situ electrochemically polymerized on the surfaces of FTO electrodes with a directional alignment TiO₂ nanorod array to obtain TiO₂/PTPA-HATN core-shell nanocomposite films. Compared with the PTPA-HATN film, the TiO₂/PTPA-HATN composite film exhibits higher optical contrast and faster response time, with contrast of 57% at 783 nm, coloring time of 3.62 s and discoloring time of 2.55 s (43%, 4.63 s and 4.77 s for PTPA-HATN film, respectively). After 400 cycles, the contrast of nanocomposite film decreased by 28%, while the PTPA-HATN film basically lost its electrochromic properties. A simple three-layer EC prototype device based on TiO₂/PTPA-HATN nanocomposite film constructed with hydrogel electrolyte clearly shows color changes at different voltages. On the one hand, the formation of core-shell porous nanostructure of TiO₂/PTPA-HATN composite film provides a larger ion doping/de-doping interface, shortening the average diffusion length of ions. On the other hand, the large indented polymer-nanorods contact interface makes it difficult for the polymer to detach from the electrode, thus significantly improving the cyclic stability of the composite film.     

TiO2 nanotube array film prepared by anodization as anode material for lithium ion batteries

TiO₂ array film fabricated by potentiostatic anodization of titanium is characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and charge–discharge measurements. The XRD results indicated that the TiO₂ array is amorphous, and after calcination at 500 °C, it has the anatase form. The pore size and wall thickness of TiO₂ nanotube arrays synthesized at different anodization voltages are highly dependent on the applied voltage. The electrochemical performance of the prepared TiO₂ nanotube array as an electrode material for lithium batteries was evaluated by galvanostatic charge–discharge measurement. The sample prepared at 20 V shows good cyclability but low discharge capacity of 180 mA h cm⁻³, while the sample prepared at 80 V has the highest discharge capacity of 340 mA h cm⁻³.