Effect of ionic interactions on the rates of reduction of Cu(II) with H2O2 in aqueous solutions

The rates of reduction of Cu(II) with H₂O₂ have been measured in NaCl and NaBr solutions and mixtures with NaClO₄ as a function of pH (6 to 9), temperature (5 to 45°C) and ionic composition (0.1 to 6M). The effect of pH on the rates was found to be independent of temperature and ionic composition. The rates increased as a function of [H⁺] raised to the power of 1.3 to 1.6. Speciation calculations indicate that this pH dependence can be attributed to Cu(OH)₂ being the reactive species. The rate constants in NaCl and NaBr and mixtures with NaClO₄ were independent of ionic strength, but proportional to the halide concentration raised to the power of 2.0 (0.2 to 2.6M). These results can be attributed to Cu(OH)₂Cl ₂ ²⁻ being the reactive species to reduction with H₂O₂. The Cu(I) halide complexes formed from the reduction are not easily oxidized with O₂ or H₂O₂. The faster rates in Br⁻ solutions, which form stronger complexes with Cu⁺, support this contention. Measurements made in NaCl with added NaHCO₃, NaB(OH)₄ EDTA, NTA and glycine were also made. These measurements indicate that the CuL complexes (L=B(OH) ₄ ⁻ , CO ₃ ²⁻ , EDTA, NTA, and glycine) are not very reactive to reduction with H₂O₂. The addition of Mg²⁺ or Ca²⁺ caused the rates to increase due to the formation of MgL or CaL complexes and the resultant release of reactive Cu²⁺.     

The homogeneity range of lyonsite-type phase existing in the CrVO4 - Co3V2O8 system

In the work presented here, the way of obtaining the phase with general formula Co_3+1.5xCr_2–x(VO₄)₄ (0 ≤ × < 0.4) is demonstrated. A new phase is detected in CrVO₄ - Co₃V₂O₈ that is formed in one of the intersection of the ternary CoO - V₂O₅ - Cr₂O₃ system. Monophasic Co₃Cr₂(VO₄)₄ (Co_3+1.5xCr_2−x(VO₄)₄, where × = 0) was obtained from both a mixture comprising CrVO₄ and Co₃V₂O₈ as well as from the mixture of CoV₂O₆ with CoCr₂O₄. The Co_3+1.5xCr_2−x(VO₄)₄ is isotypic with the those demonstrating the lyonsite-type structure. The temperature of melting for the new compound was established using the DTA methods.      

Influence of support acidity on electronic state of platinum in oxide systems promoted by SO4 2− anions

The electronic state of platinum supported on SO₄/ZrO₂, SO₄/TiO₂, SO₄/Al₂O₃, and SO₄/SiO₂ systems and on systems unpromoted by sulfur was investigated by diffuse-reflectance IR spectroscopy using CO as the probe molecule. The introduction of SO₄ ²⁻ anions increases the electron deficit on platinum particles. This suppresses the formation of bridging CO complexes with the metal, leads to the high-frequency shift of absorption maxima of CO adsorbed in the linear form, and stabilizes positively charged metal species (Pt^δ+ and Pt⁺) during the reduction process. The formation of the positively charged species includes the interaction between the acidic protons and the metal particles yielding [Pt−H]^δ+ adducts. The extent of the influence of the support on the electronic state of the metal increases in the series SO₄/SiO₂<SO₄/Al₂O₃<SO₄/TiO₂<SO₄/ZrO₂ in parallel with an increase in the strength of the acid sites in the system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1094–1099, June, 1998.     

Structural and spectroscopic characterization of Al2−x Cr x O3 powders obtained by polymeric precursor method

Al₂O₃ and Al_2−x Cr _x O₃ (x = 0.01, 0.02 and 0.04) powders have been synthesized by the polymeric precursors method. A study of the structural evolution of crystalline phases corresponding to the obtained powders was accomplished through X-Ray Diffraction and UV-vis spectroscopy (reflectance spectra and CIEL^*a^*b^* color data). The obtained results allow to identify the γ-Al₂O₃ to α-Al₂O₃ phase transition. The single-phase α-Al₂O₃ powder was obtained after heat treatment at 1050 °C for 2 h. The results show that the green to red color transition and ruby luminescence lines observed for the powders of Al_2−x Cr _x O₃ are related to the γ to α-Al₂O₃ phase transition and the temperature and time range for such transition depends on the chromium content.     

Investigation on the catalytic activity of doped low-percentage oxide catalysts Mn/ZnO obtained from oxalate precursor

The precursors with a low manganese content ≤ 0.07% Mn were synthesized by spontaneous crystallization from Zn²⁺, Mn²⁺ and C₂O₄ ²⁻-containing solutions. The initial ratio Zn²⁺:C₂O₄ ²⁻ = 1:1 and 1:2 influences the morphology and prevailing orientations of the crystallites in the oxalate samples. The presence of such small Mn content in the samples does not change the morphology or size of the crystals. The ZnO and Mn/ZnO oxides with manganese content from 0.51×10⁻² to 15.1×10⁻² Wt % are obtained after thermal decomposition of the oxalates. The oxides preserved the morphology of the precursors. The catalytic tests show that the pure ZnO has a poor activity for CO oxidation reaction. Its doping with Mn promotes the catalytic activity (up from twice to five times) in spite of the very low contents of the dopants. The observed increase of the activity depends on both dopant concentration and Zn²⁺:C₂O₄ ²⁻ ratio, probably due to the different mechanism of the manganese inclusion and different morphology of the oxides. The catalysts of the 1:2 series are more active in CO oxidation reaction.      

The mercury chromates Hg6Cr2O9 and Hg6Cr2O10—Preparation and crystal structures, and thermal behaviour of Hg6Cr2O9

The basic mercury(I) chromate(VI), Hg₆Cr₂O₉ (=2Hg₂CrO₄·Hg₂O), has been obtained under hydrothermal conditions (200 °C, 5 days) in the form of orange needles as a by-product from reacting elemental mercury and K₂Cr₂O₇. Hydrothermal treatment of microcrystalline Hg₆Cr₂O₉ in demineralised water at 200 °C for 3 days led to crystal growth of red crystals of the basic mercury(I, II) chromate(VI), Hg₆Cr₂O₁₀ (=2Hg₂CrO₄·2HgO). The crystal structures were solved and refined from single crystal X-ray data sets. Hg₆Cr₂O₉: space group P2₁2₁2₁, Z=4, a=7.3573(12), b=8.0336(13), , 3492 structure factors, 109 parameters, R[F²>2σ(F²)]=0.0371, wR(F² all)=0.0517; Hg₆Cr₂O₁₀: space group Pca2₁, Z=4, a=11.4745(15), b=9.4359(12), , 3249 structure factors, 114 parameters, R[F²>2σ(F²)]=0.0398, wR(F² all)=0.0625. Both crystal structures are made up of an intricate mercury-oxygen network, subdivided into single building blocks [O-Hg-Hg-O] for the mercurous compound, and [O-Hg-Hg-O] and [O-Hg-O] for the mixed-valent compound. Hg₆Cr₂O₉ contains three different Hg₂²⁺ dumbbells, whereas Hg₆Cr₂O₁₀ contains two different Hg₂²⁺ dumbbells and two Hg²⁺ cations. The Hg^I-Hg^I distances are characteristic and range between 2.5031(15) and 2.5286(9) Å. All Hg₂²⁺ groups exhibit an unsymmetrical oxygen environment. The oxygen coordination of the Hg²⁺ cations is nearly linear with two tightly bonded O atoms at distances around 2.07 Å. For both structures, the chromate(VI) anions reside in the vacancies of the Hg-O network and deviate only slightly from the ideal tetrahedral geometry with average Cr-O distances of ca. 1.66 Å. Upon heating at temperatures above 385 °C, Hg₆Cr₂O₉ decomposes in a four-step mechanism with Cr₂O₃ as the end-product at temperatures above 620 °C.     

Doped-ZrO2 Aerogels: Catalysts of Controlled Structure and Properties

Doped ZrO₂ aerogels (characterised by TEM, DTA and N₂ adsorption) have been prepared and catalytically tested in CO/CO₂ hydrogenation [1] and CH₄ oxidation [2]. The primary aerogels showed cross-linked clusters of (X-ray) amorphous particles smaller than 5 nm which led to well-developed mesoporous solids with an average pore size of about 10 nm and high surface area (up to 250 m²g⁻¹) [1]. Cu/ZrO₂ aerogels (known to be very active and selective towards methanol synthesis in CO hydrogenation without predominant formation of alkanes even at higher temperatures [1]) are now seen to show these effects even more clearly in CO₂ hydrogenation. In methane oxidation, both Rh/ZrO₂ and Y₂O₃/ZrO₂ were very active. Consideration is given to the nature of the active sites, the role of CO₂ and metal/oxide interfaces and how an understanding of this reactivity can lead to better dispersed ZrO₂.     

Chemistry of ruthenium in N2P2X2 (X = Cl, Br) coordination sphere: Synthesis, characterization and reactivities

Reaction of 2-(phenylazo)pyridine (pap) with [Ru(PPh₃)₃X₂] (X = Cl, Br) in dichloromethane solution affords [Ru(PPh₃)₂(pap)X₂]. These diamagnetic complexes exhibit a weakdd transition and two intense MLCT transitions in the visible region. In dichloromethane solution they display a one-electron reduction of pap near − 0.90 V vs SCE and a reversible ruthenium(II)-ruthenium(III) oxidation near 0.70 V vs SCE. The [Ru^III(PPh₃)₂(pap)Cl₂]⁺ complex cation, generated by coulometric oxidation of [Ru(PPh₃)₂(pap)Cl₂], shows two intense LMCT transitions in the visible region. It oxidizes N,N-dimethylaniline and [Ru^II(bpy)₂Cl₂] (bpy = 2,2′-bipyridine) to produce N,N,N′,N′-tetramethylbenzidine and [Ru^III(bpy)₂Cl₂]⁺ respectively. Reaction of [Ru(PPh₃)₂(pap)X₂] with Ag⁺ in ethanol produces [Ru(PPh₃)₂(pap)(EtOH)₂]²⁺ which upon further reaction with L (L = pap, bpy, acetylacetonate ion(acac⁻) and oxalate ion (ox²⁻)) gives complexes of type [Ru(PPh₃)₂(pap)(L)]ⁿ⁺ (n = 0, 1, 2). All these diamagnetic complexes show a weakdd transition and several intense MLCT transitions in the visible region. The ruthenium(II)-ruthenium(III) oxidation potential decreases in the order (of L): pap > bpy > acac⁻ > ox²⁻. Reductions of the coordinated pap and bpy are also observed.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Electrochemical synthesis of Fe3O4-PB nanoparticles with core-shell structure and its electrocatalytic reduction toward H2O2

The Fe₃O₄-Prussian blue (PB) nanoparticles with core-shell structure have been in situ prepared directly on a nano-Fe₃O₄-modified glassy carbon electrode by cyclic voltammetry (CV). First, the magnetic nano-Fe₃O₄ particles were synthesized and characterized by X-ray diffraction. Then, the properties of the Fe₃O₄-PB nanoparticles were characterized by CV, electrochemical impedance spectroscopy, and superconducting quantum interference device. The resulting core-shell Fe₃O₄-PB-modified electrode displays a dramatic electrocatalytic ability toward H₂O₂ reduction, and the catalytic current was a linear function with the concentration of H₂O₂ in the range of 1 × 10⁻⁷~5 × 10⁻⁴ mol/l. A detection limit of 2 × 10⁻⁸ (s/n = 3) was determined. Moreover, it showed good reproducibility, enhanced long-term stability, and potential applications in fields of magnetite biosensors.     

CrOx/SiO2催化剂上丙烷在CO2气氛中脱氢反应的研究

采用XRD、UV-vis DRS、ESR和微分吸附量热等技术,考察了铬担载量分别为2.5、5和10wt%的CrO_x/SiO₂催化剂的结构、表面性质和氧化还原性能。结果表明,催化剂表面上存在多种Cr的氧化态和聚集形式。随着Cr担载量从2.5wt%到10wt%的逐渐增大,催化剂表面占主导地位的Cr物种由CrO₃单体转为多聚CrO₃和Cr₂O₃晶相。在CO₂气氛中催化剂对丙烷转化率和丙烯选择性的大小顺序为2.5wt%CrO_x/SiO₂>5wt%CrO_x/SiO₂>10wt%CrO_x/SiO₂,反应过程中的原位ESR和UV-visDRS测定结果表明,催化剂表面的反应活性中心为Cr⁵⁺,Cr⁵⁺可由催化剂预处理过程中Cr³⁺的氧化及丙烷反应过程中CrO₃单体的还原产生,在反应中CO₂可使Cr³⁺重新氧化为Cr⁵⁺.     

XRD and UV-Vis diffuse reflectance analysis of CeO2-ZrO2 solid solutions synthesized by combustion method

A series of ceria-incorporated zirconia (Ce_1−xZr_xO₂,x = 0 to 1) solid solutions were prepared by employing the solution combustion synthesis route. The products were characterized by XRD and UV-Vis-NIR diffuse reflectance spectroscopy. The materials are crystalline in nature and the lattice parameters of the solid solution series follow Vegard’s law. Diffuse reflectance spectra of the solid solutions in the UV region show two intense bands at 250 and 297 nm which are assigned respectively to Ce³⁺ ← O²⁻and Ce⁴⁺ ← O²⁻ charge transfer transitions. The two vibrational bands in 6960 cm⁻¹ and 5168 cm⁻¹ in the NIR region indicate the presence of surface hydroxyl groups on these materials.     

Structure and Ionic Conductivity of Bi6Cr2O15, a New Structure Type Containing (Bi12O14)n Columns and CrO4 Tetrahedra

Powder samples of the Cr⁶⁺-containing compound Bi₆Cr₂O₁₅ were prepared by solid state reaction of Bi₂O₃ and Cr₂O₃ in air at 650°C. The structure was solved and refined using high-resolution neutron powder diffraction data in space group Ccc2, with anisotropic thermal displacement parameters a=12.30184(5), b=19.87492(7), and c=5.88162(2) Å, V=1438.0 ų, and 126 variables to R_F=1.8%. Bi₆Cr₂O₁₅ exhibits a new structure type that contains (Bi₁₂O₁₄)⁸ⁿ⁺_n columns, of the kind previously found only for phases isotypic with Bi₁₃Mo₄VO₃₄. Each column is surrounded by eight CrO²⁻₄ tetrahedra. The ionic conductivity of Bi₆Cr₂O₁₅ was determined by impedance measurements to be 3.5×10⁻⁵ (Ω cm)⁻¹ at 600°C.     

Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Aqueous sol–gel processing of precursor oxides for ZrW<Subscript>2</Subscript>O<Subscript>8</Subscript> synthesis

This paper describes the synthesis of ZrW₂O₈ by the use of an aqueous citrate-gel method in order to prepare a fine, pure and homogeneous oxide mixture suitable for ceramic processing. The thermal expansion coefficient thus obtained for α-ZrW₂O₈ is −10.6 × 10⁻⁶ °C⁻¹ (50–125 °C) whereas for the β-ZrW₂O₈ a value of −3.2 × 10⁻⁶ °C⁻¹ (200–300 °C) is obtained. The advantages of the use of a sol–gel method is expressed in the very homogeneous end-products. The paper describes crystallographic data, morphological structure and the thermal expansion properties of the ZrW₂O₈ material. Moreover, photoluminescence and photochromic properties specific to the precursor gel are described and analyzed. These effects support our views that the precursors show homogeneity up to nanometer level.     

Kinetics of the Formation of the Blue Complex CrO(O2)2 Formed by Dichromate and H2O2 in Acid Solutions. A Stopped-Flow Investigation Using Rapid-Scan UV-VIS Detection

Summary.  The kinetics of the CrO(O₂)₂ formation by H₂O₂ and Cr₂O₇ ²⁻ in aqueous acidic media was measured at 293 ± 2 K in a pH range between 2.5 and 3.3. Using the stopped-flow method with rapid scan UV-VIS detection, the rate law of the formation of CrO(O₂)₂ was determined. For the media HClO₄, HNO₃ and CH₃COOH, the reaction order in the Cr₂O₇ ²⁻ concentration was found to be 0.5. For [H₂O₂] as well as for [H⁺], the reaction was first order in all acids used. In HCl and H₂SO₄ media the reaction was first order in Cr₂O₇ ²⁻. At T = 293 ± 2 K the rate constant for the formation of Cr(O)(O₂)₂ was found to be (7.3 ± 1.9) · 10² M^−3/2 s⁻¹ in HClO₄. Corresponding author. E-mail: grampp@ptc.tu-graz.ac.at Received January 30, 2002; accepted (revised) June 5, 2002     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

A study of YBa2(Cu1?xMex)3O6 + δ (Me = Al, Co, Fe) electrophysical and electrochemical properties

The structure, thermal expansion coefficient, and electroconductivity of YBa₂(Cu_1−x Al _x )₃O_6+δ (x = 0.0–0.9) were studied at 20 to 900°C in air. The most conducting compositions of YBa₂(Cu_1−x Me _x )₃O_6+δ (Me = Al, Co, Fe) were determined. The electrochemical activity of electrodes with the most conducting compositions of YBa₂(Cu_1−x Me _x )₃O_6+δ (Me = Al, Co, Fe) was studied in a wide polarization range in the contact with 0.9ZrO₂ + 0.1Y₂O₃ solid electrolyte in air at the temperatures of 700 to 900°C. Original Russian Text ? V.K. Gil’derman, I.D. Remez, 2009, published in Elektrokhimiya, 2009, Vol. 45, No. 5, pp. 612–615. Published by report at IX Conference “Fundamental Problems of Solid State Ionics”, Chernogolovka, 2008.     

Nitrite formation in aerated aqueous azide solutions: A radiation chemical study

Gamma radiolysis of oxygenated 1–10 mM azide solutions was carried out at various pH values. In oxygenated 10 mM azide solutions, H₂O₂ and NO ₂ ⁻ were observed as radiolytic products while NH3 was not. The concentration of H₂O₂ reached its maximum level at a dose of 1 kGy, whereas NO ₂ ⁻ yield increased non-linearly beyond 2 kGy in this system. Both in aerated and oxygenated systems, G(NO ₂ ⁻ ) and G(H₂O₂) were found to vary with N ₃ ⁻ concentration. The yield of NO ₂ ⁻ was found to be dependent on both dose rate and pH. On pulse radiolysis, NO ₂ ⁻ was found as a radiolytic product in aerated 1 mM azide solution at pH 6.8. In this system the intermediate generated exhibits absorbance around 250 nm. The overall results obtained during the present study reveal that in presence of both reducing radical (mainly e _aq ⁻ ) and oxygen, N ₃ ⁻ produced an intermediate possibly NH₂O ₂ ^• radical, which is the prime source for NO ₂ ⁻ generation.