Spatially addressable chemoselective C-terminal ligation of an intein fusion protein from a complex mixture to a hydrazine-terminated surface

Protein immobilization on surfaces is useful in many areas of research, including biological characterization, antibody purification, and clinical diagnostics. A critical limitation in the development of protein microarrays and heterogeneous protein-based assays is the enormous amount of work and associated costs in the purification of proteins prior to their immobilization onto a surface. Methods to address this problem would simplify the development of interfacial diagnostics that use a protein as the recognition element. Herein, we describe an approach for the facile, site-specific immobilization of proteins on a surface without any preprocessing or sample purification steps that ligates an intein fusion protein at its C-terminus by reaction with a hydrazine group presented by a surface. Furthermore, we demonstrate that this methodology can directly immobilize a protein directly from cell lysate onto a protein-resistant surface. This methodology is also compatible with soft lithography and inkjet printing so that one or more proteins can be patterned on a surface without the need for purification.     

Direct site-selective covalent protein immobilization catalyzed by a phosphopantetheinyl transferase

Immobilization of proteins onto solid supports is important in the preparation of functional protein microarrays and in the development of bead-based bioassays, biosensors, and industrial biocatalysts. In order to generate the stable, functional, and homogeneous materials required for these applications, attention has focused on methods that enable the efficient and site-specific covalent immobilization of recombinant proteins onto a wide range of platforms. To this end, the phosphopantetheinyl transferase Sfp was employed to catalyze the direct immobilization of recombinant proteins bearing the small, genetically encoded ybbR tag onto surfaces functionalized with CoA. Using mass spectrometry, it was shown that the Sfp catalyzes immobilization of a model acyl carrier protein (ACP) onto CoA-derivatized PEGA resin beads through specific covalent bond formation. Luciferase (Luc) and glutathione-S-transferase (GST) ybbR-fusion proteins were similarly immobilized onto PEGA resin retaining high levels of enzyme activity. This strategy was also successfully applied for the immobilization of the ACP, as well as ybbR-Luc, -GST, and -thioredoxin fusion proteins, on hydrogel microarray slides. Overall, the Sfp-catalyzed surface ligation is mild, quantitative, and rapid, occurring in a single step without prior chemical modification of the target protein. Immobilization of the target proteins directly from a cell lysate mixture was also demonstrated.     

Carboxyl-terminated dendrimer-coated bioactive interface for protein microarray: high-sensitivity detection of antigen in complex biological samples

Protein microarrays are promising tools that can potentially enable high throughput proteomic screening in areas such as disease diagnosis and drug discovery. A critical aspect in the development of protein microarrays is the optimization of the array's surface chemistry to achieve the high sensitivity required for detection of proteins in cell lysate and other complex biological mixtures. In the present study, a high-density antibody array with minimal nonspecific cellular protein adsorption was prepared using a glass surface coated with a poly(propyleneimine) dendrimer terminated with carboxyl group (PAMAM-COOH). The carboxyl-terminated dendrimer-modified surface has almost similar nonspecific cellular protein adsorption when compared to an inert PEG-modified surface. In addition, the multiple functional sites available for reaction on the dendrimer surface facilitated high-density immobilization of antibodies and efficient capture of bioanalytes. Various molecules were tested for their ability to block or deactivate the reactive carboxyl surface after antibody immobilization to further reduce the nonspecific binding. A short oligoethylene glycol (NH2-d4-PEG-COOH), was found to significantly improve the signal-to-noise ratio of the assay, resulting in higher sensitivity. The properties and functional qualities of the various surfaces were characterized by contact angle and AFM measurements. Nonspecific protein adsorption and protein immobilization as a function of dendrimer generations and sensitivity of antigen capturing from a buffer (1 pM) as well as from the complex cell lysate (10 pM) system were examined. Our detailed experimental studies demonstrated a facile method of preparing surfaces with high protein loading and low nonspecific protein binding for the development of high sensitivity protein microarrays.     

Selection of aptamers for a non-DNA binding protein in the context of cell lysate

Aptamer-facilitated Protein Isolation from Cells (AptaPIC) is a recently introduced method that allows, in particular, generation of aptamers for a protein target in a context of a crude cell lysate. The approach enables efficient, tag-free, affinity purification of target proteins which are not available in a pure form a priori, and for which no affinity ligands are available. In the proof-of-principle work, AptaPIC was used to develop aptamers for and purify MutS, a DNA mismatch repair protein. The DNA-binding nature of MutS raised concerns that AptaPIC was not a generic technique and could be inapplicable to protein targets that do not possess native nucleic acid-binding properties. Here we prove that these concerns are invalid. We used AptaPIC to generate pools of aptamers for human Platelet-Derived Growth Factor chain B (PDGF-B) protein, a non-DNA binding protein, in the context of a bacterial cell lysate, and subsequently purify it from the same lysate. Within a small number of rounds, the efficiencies of aptamer selection were similar in conventional Systematic Evolution of Ligands by Exponential Enrichment (SELEX) for pure protein and in AptaPIC for protein in the cell lysate. The conventional selection approach resulted in an aptamer pool with an EC(50) value of 2.0±0.1 μM, while the AptaPIC selection approach resulted in a pool with an EC(50) value of 3.9±0.4 μM. Our results clearly demonstrate that selection of aptamers for proteins in the cell lysate is not only realistic but also efficient.     

Spatially addressable protein array: ssDNA-directed assembly for antibody microarray

Protein microarray offers a means for high-throughput profiling of cellular proteins to provide insights into the mechanisms of biological processes. This study describes the design and fabrication of a robust platform, spatially addressable protein array (SAPA), by exploring the specificity of ssDNA hybridization for self-assembly of semi-synthetic ssDNA-antibody conjugates which capture antigens from complex biological samples. This approach does not involve the direct immobilization of antibodies nor antigen, but instead captures the target antigens in the solution phase followed by self-directed assembly of the complex onto the surface. In an effort to optimize the platform, the effects of surface chemistry, nonspecific protein adsorption, facile preparation, and purification of ssDNA-conjugated antibody and capture of the antigen from a complex biological sample such as cell lysate were examined. This platform allowed antigen detection in cell lysate with high sensitivity (1 pM). The method described herein can be extended to the high-throughput detection of other interacting molecules in solution phase and their subsequent assembly onto any substrate.     

Development of a fully integrated microfluidic system for sensing infectious viral disease

An active micromixer system utilizing the magnetic force was developed and examined for its ability to facilitate the mixing of more than two fluid flows. The mixing performance of the active micromixer was evaluated in aqueous-aqueous systems including dyes for visual observation. A complete analytical microfluidic system was developed by integrating various functional modules into a single chip, thus allowing cell lysis, sample preparation, purification of intracellular molecules, and subsequent analysis. Upon loading the cell samples and lysis solution into the mixing chamber, the integrated microfluidic device allows efficient cell disruption by rotation of a micromagnetic disk and control of mixing time using the Teflon-coated hydrophobic film as a microvalve. This inflow is followed by separating the cell debris and contaminated proteins from the cell lysate sample using the acrylamide (AAm)-functionalized SPE. The inflow of partially purified cell lysate sample containing the gold binding polypeptide (GBP)-fusion protein was bound onto the gold micropatterns by means of its metal binding affinity. The GBP-fusion method allows immobilization of proteins in bioactive forms onto the gold surface without surface modification suitable for studying antigen-antibody interaction. It was used for the detection of severe acute respiratory syndrome (SARS), an infectious viral disease, as an example case.     

Toward high sequence coverage of proteins in human breast cancer cells using on-line monolith-based HPLC-ESI-TOF MS compared to CE MS

A method is developed toward high sequence coverage of proteins isolated from human breast cancer MCF10 cell lines using a 2-D liquid separations. Monolithic-capillary columns prepared by copolymerizing styrene with divinylbenzene are used to achieve high-resolution separation of peptides from protein digests. This separation is performed with minimal sample preparation directly from the 2-D liquid fractionation of the cell lysate. The monolithic column separation is directly interfaced to ESI-TOF MS to obtain a peptide map. The protein digests were also analyzed by MALDI-TOF MS and an accurate M(r) of the intact protein was obtained using an HPLC-ESI-TOF MS. The result is that these techniques provide complementary information where nearly complete sequence coverage of the protein is obtained and can be compared to the experimental M(r) value. The high sequence coverage provides information on isoforms and other post-translational modifications that would not be available from methods that result in low sequence coverage. The results from the use of monolithic columns are compared to that obtained by CE-MS. The monolithic column separations provide a rugged and highly reproducible method for separating protein digests prior to MS analysis and is suited to confidently identify biomarkers associated with cancer progression.     

High affinity capture surface for matrix-assisted laser desorption/ionisation compatible protein microarrays

A surface for the capture of biotin-tagged proteins on matrix-assisted laser desorption/ionisation (MALDI) targets has been investigated. Binding of a poly-L-lysine poly(ethylene glycol)-biotin polymer to glass and gold surfaces has been demonstrated using dual wavelength interferometry. Biotinylated proteins were captured onto this surface using tetrameric neutravidin as a multivalent bridging molecule. Biotin tagging of proteins was achieved by chemical biotinylation or by expressing a protein with a biotinylation consensus sequence in E. coli. The specificity of the surface for biotin-tagged proteins allowed the purification of biotin-tagged glutathione-S-transferase from a bacterial lysate directly onto a MALDI target. Subsequently, the protein was digested on the MALDI target and a protein fingerprint analysis confirmed its presence directly, but no E. coli proteins were detected. Therefore, we conclude that this surface is highly specific for the capture of biotin-labelled proteins and has low non-specific binding properties for non-biotinylated proteins. Furthermore, protein-protein interactions using biotinylated lectins were investigated, and the selective capture of the glycoprotein fetuin with wheat germ agglutinin was demonstrated. Also, immobilised Arachis hypogea agglutinin recognised a minor asialo component of this glycoprotein on the array. The high affinity immobilisation of proteins onto this surface allowed effective desalting procedures to be used which improved the desorption of high molecular weight proteins. Another aspect of this surface is that a highly ordered coupling of the analyte can be achieved which eliminates the search for the sweet spot and allows the creation of densely packed protein microarrays for use in mass spectrometry.     

Combination of cysteine- and oligomerization domain-mediated protein immobilization on a surface plasmon resonance (SPR) gold chip surface

Here we report an effective method for protein immobilization on a surface plasmon resonance (SPR) gold chip, describing the combination of cysteine- and oligomerization domain-mediated immobilization of enhanced green fluorescent protein (EGFP) as a model protein for the purpose of orientation-controlled surface density packing. In order to facilitate the oligomerization of EGFP, the dimeric and trimeric constructs derived from GCN4- leucine zipper domain were chosen for multimeric EGFP assembly. For orientation-controlled immobilization of the protein, EGFP modified with cysteine residues showing excellent orientation on a gold chip was used as a starting protein, as previously reported in our earlier study (Anal. Chem., 2007, 79, 2680-2687). Constructs of EGFP with oligomerization domains were genetically engineered, and corresponding fusion proteins were purified, applied to a gold chip, and then analyzed under SPR. The immobilized EGFP density on a gold chip increased according to the states of protein oligomerization, as dimeric and trimeric EGFPs displayed better adsorption capability than monomeric and dimeric forms, respectively. Fluorescence measurement corroborated the SPR results. Taken together, our findings indicated that the combination of cysteine- and oligomerization domain-mediated immobilization of protein could be used in SPR biosensor applications, allowing for an excellent orientation and high surface density simultaneously.     

Ion-exchange-membrane-based enzyme micro-reactor coupled online with liquid chromatography-mass spectrometry for protein analysis

In this article, we developed a membrane-based enzyme micro-reactor by directly using commercial polystyrene–divinylbenzene cation–exchange membrane as the support for trypsin immobilization via electrostatic and hydrophobic interactions and successfully applied it for protein digestion. The construction of the reactor can be simply achieved by continuously pumping trypsin solution through the reactor for only 2 min, which was much faster than the other enzyme immobilization methods. In addition, the membrane reactor could be rapidly regenerated within 35 min, resulting in a “new” reactor for the digestion of every protein sample, completely eliminating the cross-interference of different protein samples. The amount and the activity of immobilized trypsin were measured, and the repeatability of the reactor was tested, with an RSD of 3.2% for the sequence coverage of cytochrome c in ten digestion replicates. An integrated platform for protein analysis, including online protein digestion and peptide separation and detection, was established by coupling the membrane enzyme reactor with liquid chromatography–quadrupole time-of-flight mass spectrometry. The performance of the platform was evaluated using cytochrome c, myoglobin, and bovine serum albumin, showing that even in the short digestion time of several seconds the obtained sequence coverages was comparable to or higher than that with in-solution digestion. The system was also successfully used for the analysis of proteins from yeast cell lysate.     

One-step purification of a recombinant protein from a whole cell extract by reversed-phase high-performance liquid chromatography

We have developed a one-step facile, flexible and readily scalable purification method for a recombinant protein, TM 1-99 (113 amino acid residues; 12,837 Da) based on reversed-phase high-performance liquid chromatography (RP-HPLC) from an E. coli cell lysate. Following cell lysis, the cell contents were extracted with 0.1% aqueous trifluoroacetic acid (TFA), applied directly under conditions of high sample load to a narrow bore RP-HPLC C(8) column (150 mm x 2.1 mm I.D.) and eluted by a shallow gradient of acetonitrile (0.1%/min). Loads of 23 and 48 mg of lyophilized crude cell extract produced 2.4 and 4.2mg of purified product (>94% pure), respectively, at >94% recovery. Our results show the excellent potential of one-step RP-HPLC for purification of recombinant proteins from cell lysates, where high yields of purified product and greater purity are achieved compared to affinity chromatography. Such an approach was also successful in purifying just trace levels (<0.1% of total contents of crude sample) of TM 1-99 from a cell lysate.     

A proteomic approach to investigate potential biomarkers directed against membrane-associated breast cancer proteins

The identification of specific protein markers for breast cancer would provide the basis for early diagnosis. Particularly, membrane and membrane-associated proteins are rich in targets for antibodies that may constitute suitable biomarkers of carcinogenesis. However, membrane proteins separation using 2-DE remains difficult. In this work, the breast cancer cell line MCF7 was used as source of proteins for the screening of potential cell membrane-associated antigens recognized by autoantibodies in patients with breast cancer and healthy volunteers. The protein extract obtained using trifluoroethanol (TFE) as cosolvent was compared to a total cell lysate protein extract prepared by a current technique. After 2-DE separation of the two extracts, their protein patterns clearly differed. About 63% of the proteins identified in the TFE-extract were predicted to possess at least one transmembrane domain. 2-D blots probed with sera from cancer patients or from healthy volunteers showed that, as expected, additional antigens were provided in the TFE-extract. Thus, the method described here appeared well suited for proteomic investigation of potential biomarkers undetected by current techniques.     

Selective Protein Hyperpolarization in Cell Lysates Using Targeted Dynamic Nuclear Polarization

Nuclear magnetic resonance (NMR) spectroscopy has the intrinsic capabilities to investigate proteins in native environments. In general, however, NMR relies on non‐natural protein purity and concentration to increase the desired signal over the background. We here report on the efficient and specific hyperpolarization of low amounts of a target protein in a large isotope‐labeled background by combining dynamic nuclear polarization (DNP) and the selectivity of protein interactions. Using a biradical‐labeled ligand, we were able to direct the hyperpolarization to the protein of interest, maintaining comparable signal enhancement with about 400‐fold less radicals than conventionally used. We could selectively filter out our target protein directly from crude cell lysate obtained from only 8 mL of fully isotope‐enriched cell culture. Our approach offers effective means to study proteins with atomic resolution in increasingly native concentrations and environments.     

Covalent and selective immobilization of fusion proteins

A general method for the covalent immobilization of fusion proteins is presented. The approach is based on the unusual mechanism of the human O6-alkylguanine-DNA alkyltransferase, which irreversibly transfers the alkyl group from its substrate, alkylated or benzylated guanine, to a reactive cysteine residue. By attaching the benzyl group to a surface, hAGT fusion proteins immobilize themselves in a specific and covalent manner. The specificity of the reaction of hAGT with its substrate even allows the specific immobilization of hAGT fusion proteins directly out of cell extracts, making the approach an attractive alternative to currently used immobilization procedures.     

Exploring enzymatic catalysis at a solid surface: a case study with transglutaminase-mediated protein immobilization

The factors affecting enzymatic protein immobilization with microbial transglutaminase (MTG) were explored. As model proteins, enhanced green fluorescent protein (EGFP) and glutathione S-transferase (GST) were chosen and tagged with a neutral Gln-donor substrate peptide for MTG (Leu-Leu-Gln-Gly, LLQG-tag) at their C-terminus. To create a specific surface, displaying reactive Lys residues, to be cross-linked with the Gln residue in the LLQG-tag of target proteins by MTG catalysis, a polystyrene surface was physically coated with beta-casein. Both recombinant proteins were immobilized onto the beta-casein-coated surface only in the presence of active MTG, indicating that those proteins were enzymatically immobilized to the surface. MTG-mediated protein immobilization markedly depends on the pH and ionic strength of the reaction media. The optimal pH range of MTG-mediated immobilization of both recombinant proteins was around 5, at which point the MTG-catalyzed reaction in aqueous solution is not normally preferred. By utilizing a pH-dependent change in EGFP fluorescence, we found that the apparent pH at the surface is likely to be lower than bulk pH, this difference is not attributed to an optimal pH shift in MTG-mediated immobilization. On the other hand, lower yields of protein immobilization at higher ionic strength suggest that electrostatic interaction is a key factor governing MTG catalysis at a solid surface. The results of this study indicate that, in enzymatic catalysis at a solid surface, the concentration of substrates at the surface can enhance the catalytic efficiency, and this could alter the pH dependence of enzymatic catalysis.     

Differential extraction and enrichment of human sperm surface proteins in a proteome: identification of immunocontraceptive candidates

The objective of this study was to discover previously unknown human sperm surface proteins that may be candidate contraceptive vaccinogens. To this end, methods of concentrating human sperm proteins for microsequencing by mass spectrometry were used, which increased the likelihood of identifying surface proteins. Vectorial labeling, differential extraction and two-dimensional (2-D) gel electrophoresis were employed to identify and isolate proteins accessible at the cell surface. Percoll harvested or swim-up sperm were either solubilized directly or solubilized after surface labeling with sulfo-succinimidyl-6-(biotinamido)hexanoate (sulfo-NHS-LC-biotin). Comparisons were made of proteins extracted with four lysis buffers: (i) Celis buffer containing 9.8 M urea and 2% Igepal CA-630; (ii) 1% Triton X (TX)-100; (iii) 1.7% TX-114 followed by phase partitioning; or (iv) 1 M NaCl. Blots of proteins separated by high-resolution 2-D electrophoresis were probed with avidin and antibodies to known proteins specific for three domains: the sperm surface (SAGA-1), the acrosome (SP-10), and the cytoskeleton (alpha-tubulin). Celis buffer (45 min) extracted proteins from all three major compartments. However, a 20-s extraction in Celis buffer enriched for several proteins and enabled the identification of several novel peptides by mass spectrometry. Mild extraction with TX-100 or 1 M NaCl solubilized mainly membrane and acrosomal proteins, but not cytoskeletal proteins. Comparison of biotinylated proteins extracted by each method showed that the major vectorially labeled proteins solubilized by Celis buffer were also solubilized by TX-100, TX-114, and 1 M NaCl. Extraction with TX-114 followed by phase-partitioning significantly enriched hydrophobic surface proteins and aided resolution and isolation. Eight protein spots microsequenced following all these extraction methods proved to be novel sperm molecules.     

Using enrichment index for quality control of secretory protein sample and identification of secretory proteins

Analysis of secretory proteins is an important area in proteomic research. We propose that a good secretory protein sample should be enriched with known secretory proteins, and a secretory protein should be enriched in the secretory protein sample compared with its corresponding soluble cell lysate. Positive identifications of proteins were subjected to quantitation of spectral counts, which reflect relative protein abundance. Enrichment index of the sample (EIS) and the enrichment index for protein (EIP) were obtained by comparing proteins identified in the secretory protein sample and those in the soluble cell lysate sample. The quality of the secretory protein sample can be represented by EIS. EIP was used to identify the secretory proteins. The secretory proteins from mouse dendritic cell sarcoma (DCS) were analyzed by MS. The EISs of two samples were 75.4 and 84.65, respectively. 72 proteins were significantly enriched in secretory protein samples, of which 42 proteins were either annotated in Swiss‐Prot and/or predicted by signal peptides to be secretory. In the remaining 30 proteins, 12 and 15 proteins were positively predicted by SecretomeP and ProP, respectively, and 5 proteins were positive by both methods. Furthermore, 11 proteins were found to be present in exosome in other studies that involved mice dendritic cell lines. We suggest that this assessment method is helpful for systemic research of secretory proteins and biomarker discovery for diseases such as cancer. Copyright © 2008 John Wiley & Sons, Ltd.     

Gold patterned biochips for on-chip immuno-MALDI-TOF MS: SPR imaging coupled multi-protein MS analysis

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) analysis of immuno-captured target protein efficiently complements conventional immunoassays by offering rich molecular information such as protein isoforms or modifications. Direct immobilization of antibodies on MALDI solid support enables both target enrichment and MS analysis on the same plate, allowing simplified and potentially multiplexing protein MS analysis. Reliable on-chip immuno-MALDI-TOF MS for multiple biomarkers requires successful adaptation of antibody array biochips, which also must accommodate consistent reaction conditions on antibody arrays during immuno-capture and MS analysis. Here we developed a facile fabrication process of versatile antibody array biochips for reliable on-chip MALDI-TOF-MS analysis of multiple immuno-captured proteins. Hydrophilic gold arrays surrounded by super-hydrophobic surfaces were formed on a gold patterned biochip via spontaneous chemical or protein layer deposition. From antibody immobilization to MALDI matrix treatment, this hydrophilic/phobic pattern allowed highly consistent surface reactions on each gold spot. Various antibodies were immobilized on these gold spots both by covalent coupling or protein G binding. Four different protein markers were successfully analyzed on the present immuno-MALDI biochip from complex protein mixtures including serum samples. Tryptic digests of captured PSA protein were also effectively detected by on-chip MALDI-TOF-MS. Moreover, the present MALDI biochip can be directly applied to the SPR imaging system, by which antibody and subsequent antigen immobilization were successfully monitored.     

Nitrogen‐Doped Carbon Hollow Spheres for Immobilization,Direct Electrochemistry,and Biosensing of Protein

Nitrogen‐doped carbon hollow spheres (NCHS) were designed for the immobilization and biosensing of proteins. Chitosan was first functionalized with glutaraldehyde to form cross‐linked chitosan with free ? CHO groups (GCS). The as‐prepared GCS was used for dispersion of nitrogen‐doped carbon hollow spheres. Using glucose oxidase (GOD) as a model, the NCHS was tested for immobilization of redox proteins and the design of electrochemical biosensors. GOD molecules immobilized in the nanocomposites showed direct electrochemistry with a formal potential of ?0.448 V and well electrochemical performance. The proposed biosensor exhibited a linear response to glucose concentrations ranging from 3.7 µM to 18.0 mM with a detection limit of 1.2 µM and a sensitivity of 11.85 µA mM^?1. This biosensor was also applied to detect glucose in human serum samples, accomplishing good recovery in the range of 92–105 %. The nanocomposites provided a good matrix for protein immobilization and biosensor fabrication.     

Studies on the adsorption of cell impurities from plasmid-containing lysates to phenyl boronic acid chromatographic beads

Plasmid DNA (pDNA) is purified directly from alkaline lysis-derived Escherichia coli (E. coli) lysates by phenyl boronate (PB) chromatography. The method explores the ability of PB ligands to bind covalently, but reversibly, to cis-diol-containing impurities like RNA and lipopolysaccharides (LPS), leaving pDNA in solution. In spite of this specificity, cis-diol free species like proteins and genomic DNA (gDNA) are also removed. This is a major advantage since the process is designed to keep the target pDNA from binding. The focus of this paper is on the study of the secondary interactions between the impurities (RNA, gDNA, proteins, LPS) in a pDNA-containing lysate and 3-amino PB controlled pore glass (CPG) matrices. Runs were designed to evaluate the role of adsorption buffer composition, feed type (pH, salt content), CPG matrix and sample pretreatment (RNase A, isopropanol precipitation). Water was chosen as the adsorption buffer over MgCl(2) solutions since it maximised pDNA yield (96.2±4.9%) and protein removal (61.3±3.0%), while providing for a substantial removal of RNA (65.5±3.5%) and gDNA (44.7±14.1%). Although the use of pH 3.5 maximised removal of impurities (~75%), the best compromise between plasmid yield (~96%) and RNA clearance (~60-70%) was obtained for a pH of 5.2. Plasmid yield was maximal (>96%) when the concentration of acetate and potassium ions in the incoming lysate feed were 1.7 M and 1.0 M, respectively. The pre-treatment of lysates with RNase A deteriorated the performance since the resulting oligoribonucleotides lack the cis-diol group at their 3' termini. Overall, the results support the idea that charge transfer interactions between the boron atom at acidic pH and electron donor groups in the aromatic bases of nucleic acids and side residues of proteins are responsible for the non-specific removal of gDNA, RNA and proteins.