液晶性芳香醛化合物的合成

以对羟基苯甲醛和对烷氧基联苯酰氯为原料,采用爱因宏反应,合成了一系列4-(4'-烷氧基联苯基-4-羧基)苯甲醛.化合物的结构通过元素分析、红外光谱、核磁共振和质谱等方法确证.化合物的液晶行为用示差扫描量热法、偏光显微镜和旋光仪等方法表征.结果表明,所有的化合物加热至各自的熔点以上都能形成液晶态.在液晶态可以观察到手性近晶C相、近晶相、胆甾相和向列相的典型织构.含手性中心的化合物都有较高的旋光性,而且在合成反应中旋光性得到保持.随着分子末端烷氧基碳原子数增加,化合物(除2a和4a外)的熔点(T_m)和液晶态的清亮点(T_i)呈规律性变化,近晶相范围和近晶相-向列相转变温度渐增,而向列相温度范围递减,至十二烷基时,仅呈现近晶性.     

液晶性芳香酰胺化合物的合成

合成了一系列炖粹以酰胺基为中心桥键的刚性芳香酰胺小分子化合物，并对其作了表征，发现其中有些化合物具有液晶性。酰胺键之间能形成很强的分子间氢键，使芳香酰胺小分子化合物的熔点很高，难于形成液成液晶态。研究发现，如果在这类化合物的中心苯环上引入合适的取代基以减弱分子间氢键，同时引入合适的末端基时，则可使芳香酰胺化合物生成液晶相的能力增强。     

芳香偶氮化合物的合成研究进展

综述了芳香偶氮化合物的主要合成方法,包括重氮偶联反应、米尔斯反应、胺的氧化、芳肼的的氧化、硝基化合物的还原偶联反应、重氮盐的二聚反应、叠氮化合物的热解等,并对各方法的优缺点进行了简要评述。     

苯并10芳杂环化合物的合成

近年来符合休克尔规则的,经典的6π芳香环以外的大环或多环芳香族化合物的合成及其应用的开发曰益受到人们的重视^[1,2]。本文简要介绍含有三氟甲基及三氟乙酰基的苯并10π-芳杂环化合物的合成及其结构的确定。此类化合物目前文献中尚未见报导。     

芳醛-N-芳氧乙酰腙类化合物的合成与表征

4个芳醛分别与2个芳氧基乙酰肼反应，合成了5种新的芳醛-N-芳氧乙酰腙类化合物，其结构经元素分析，IR和^1H NMR确证。     

Regioselective Synthesis of Para‐Bromo Aromatic Compounds

Reaction of substituted benzene rings with N‐bromophthalimide, under neutral conditions, gave the corresponding bromo derivatives with a preference for the formation of the para bromo isomer over the ortho isomer. The simple work‐up procedure minimizes loss of product and the yields are good.     

Lead-Catalyzed Synthesis of Azo Compounds by Ammonium Acetate Reduction of Aromatic Nitro Compounds

Abstract

Lead/ammonium acetate is a convenient reagent for the reduction of aromatic nitro compounds to the corresponding symmetrically substituted azo compounds. Various azo compounds containing additional reducible substituents such as halogen, nitrile, acid, phenol, ester, methoxy, etc., functions have been synthesized in a single step by the use of this reagent. The conversion is reasonably fast, clean, high yielding and occurs at room temperature in methanol.     

Copper-Catalyzed Aromatic Trifluoromethylation and the Related Transformations

Trifluoromethylated aromatic compounds (Ar−CF₃) are the substances of considerable interest in various industrial fields. The high lipophilicity, strong electron-withdrawing ability, and characteristic size of trifluoromethyl group are key influences in biologically active molecules. Due to these attractive properties, the benzotrifluoride structural motifs have been widely employed in the design of pharmaceuticals, agrochemicals, dyes, liquid crystals, and polymers. Therefore, the development of highly efficient methodologies for aromatic trifluoromethylation is of significant importance for wide fields of science and technology. Recently, a great deal of attention has been paid to catalytic protocols to introduce fluoroalkyl groups into aromatic rings selectively. This personal account highlights the copper-mediated aromatic trifluoromethylation and the related transformations developed by our research group.     

Synthesis of Aromatic Ketones from Aromatic Compounds Using Vanadium‐Containing Mesoporous Silicates

Aromatic ketones were synthesized from aromatic compounds via liquid‐phase oxidation at 60 °C and 1 atm over vanadium‐containing MCM‐41 catalysts using a batch reactor. The catalysts were prepared by direct hydrothermal (4V‐MCM‐41) and wet impregnation (9V/MCM‐41) methods. Their physico‐chemical properties were determined with various characterization techniques. For the oxidations of all substrates in this work, 4 V‐MCM‐41 exhibits superior catalytic performance than 9 V/MCM‐41 due to its larger values of unit cell parameter, BET surface area, and vanadium dispersion as well as stronger oxidation ability of vanadium‐oxygen species. Apparently, the single site, isolated vanadium centers in 4V‐MCM‐41 possess much higher activity (based on the turnover number) than those containing more vanadium atoms in 9V/MCM‐41. In addition, the substrate activities decrease in the order of diphenylmethane > fluorene > 9,10‐dihydroanthracene > ethylbenzene ≥ 4‐nitroethylbenzene, which are attributed to their distinct molecular structures.     

一类芳香族偶氮化合物的合成及表征

采用重氮偶合反应合成了一系列不同对位取代的4-[N，N-(二羟乙基)]氨基偶氮苯化合物，其结构用元素分析，IR，1HNMR，DSC，DSC等进行表征和确认。     

系列烯基化芳香杂环化合物的合成及结构表征

报道了一个简单、 高选择性合成烯基化芳香杂环化合物的反应体系. 在钯的催化作用下, 以乙酸/乙酸酐或四氢呋喃为溶剂, 芳香杂环化合物与烯基化试剂进行交叉脱氢偶联, 合成了系列具有潜在光学活性的烯基化芳香杂环化合物, 确定了最佳反应条件. 采用紫外光谱、 核磁共振氢谱和X射线单晶衍射对目标化合物进行了表征, 并对反应机理进行了探讨.     

Green and Rapid Hydrothermal Crystallization and Synthesis of Fully Conjugated Aromatic Compounds

Highly fused, fully conjugated aromatic compounds are interesting candidates for organic electronics. With higher crystallinity their electronic properties improve. It is shown here that the crystallization of three archetypes of such molecules—pentacenetetrone, indigo, and perinone—can be achieved hydrothermally. Given their molecular structure, this is a truly startling finding. In addition, it is demonstrated that perinone can also be synthesized in solely high‐temperature water from the starting compounds naphthalene bisanhydride and o‐phenylene diamine without the need for co‐solvents or catalysts. The transformation can be drastically accelerated by the application of microwave irradiation. This is the first report on the hydrothermal generation of two fused heterocycles.     

Synthesis of Functionalized Diorganyl Selenides from Selenium Dihalides and Allylic Aromatic Compounds

Russian Journal of Organic Chemistry - Hitherto unknown addition and methoxyselenation reactions of selenium dihalides with methyl eugenol and allyl naphth-1-yl ether were studied. The addition and...     

Oxidative Phosphonylation of Aromatic Compounds

Abstract

Aryl phosphonates can be prepared in good yields from the respective arenes and tri- or dialkylphosphites by either chemical or electrochemical oxidation^1. The anodic oxidation proceeds either via phosphonium radical cations which then attack the arenes electrophilically or via arene radical cations which add the trialkyl-phosphite as nucleophile^1,2. Aryl phosphonates are also obtained in good yields by chemical oxidation with peroxidisulfate/AgNO₃, Iron(III)- or Cerium(IV)-complexes in acetonitrile/water or glacial acetic acid^3.     

芳香族化合物的脱芳构化反应

芳香族化合物稳定、易得,通过芳香族化合物的脱芳构化反应,制备官能化的脂肪六元碳环化合物,早以引起人们的广泛兴趣。本文对六类脱芳构化反应进行了逐一评述,其包括：氧化脱芳构化反应;还原脱芳构化反应;光催化脱芳构化反应;亲核加成脱芳构化反应;σ-键迁移重排脱芳构化反应;过渡金属参与的脱芳构化反应。其中,过渡金属参与的脱芳构化反应,反应条件温和,反应底物广泛,可应用于生物活性物质的合成。     

钝化芳环的硝化研究进展*

芳香族化合物的硝化反应是工业生产中重要的单元反应,钝化芳环的硝化反应在医药、农药、染料和炸药合成中有重要地位。本文从硝化试剂角度综述了近年来钝化芳环的硝化反应的进展,包括硝酸盐/硫酸、硝酸酯、硝酸、氮氧化物等硝化方法。简要评述了这些方法的特点,并展望了硝化方法的研究方向。其中,硝酸盐/硫酸体系具有较强的硝化能力,对于钝化芳环,可以在温和条件下以高收率得到硝化产物,在实验室制备或工业应用中具有较高的应用价值;其他硝化方法由于各种原因暂时不能对钝化程度较高的芳环进行硝化,还需进一步研究具有较高活性的硝化体系。     

bio(oh)-nabh4还原法制备氧化偶氮苯类化合物

以NaOH溶液快速沉淀BiCI3溶液制备了BiO(OH),研究了BiO(OH)对NaBH4还原芳香族硝基化合物的催化性能,考察了NaBH4用量对反应的影响.结果表明,在温和条件下BiO(OH)具有很高的催化活性和选择性.NaBH4和芳香族硝基化合物的摩尔比为1.04:1,在甲醇中室温反应2 h,芳香族硝基化合物主要被还原为氧化偶氮苯类化合物,收率80.4%～96.9%.该催化剂重复使用5次后活性没有明显下降.于120℃再生后,其活性与新制备催化剂相当.     

Synthesis and Transformations of Heterocyclic Compounds under the Influence of Microwave Radiation. (Review)

Published data on the synthesis and transformations of heterocyclic compounds with microwave treatment are analyzed and classified according to the types of products formed. The results of analogous reactions conducted with normal heating are given for comparison. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1123–1134, August, 2005.     

Synthesis and Properties of Novel Aromatic Azo Compounds from Hydroxyazobenzene and Cyanuric Chloride

A new series of aromatic azo compounds with one, two, three and five azobenzene units were facilely constructed by dehydrochlorination reaction between p‐hydroxyazobenzene, 4,4′‐dihydroxyazobenzene and cyanuric chloride under very mild conditions. Their solubility, crystallinity, thermostability, UV‐vis absorption properties and photoisomerization behaviors were carefully examined. When the number of azobenzene unit grew, the solubility of the synthesized compounds basically decreased, the crystallinity of the synthesized compounds firstly rose then dropped, while the thermostability and UV‐vis absorption ability of the synthesized compounds greatly improved. All the aromatic azo compounds exhibited typical reversible photoisomerization behaviors and were expected to be applied in photosensitive material areas.