Simultaneous Determination of Olanzapine and Fluoxetine by HPLC

A rapid, specific reversed phase HPLC method has been developed for simultaneous determination of olanzapine and fluoxetine in their formulations. Chromatographic separation of these two pharmaceuticals was carried out on an Inertsil C₁₈ reversed phase column (150 mm × 4.6 mm, 5 μm) with a 40:30:30 (v/v/v) mixture of 9.5 mM sodium dihydrogen phosphate (pH adjusted to 6.8 ± 0.1 with triethylamine), acetonitrile and methanol as mobile phase. The flow rate 1.2 mL min⁻¹ and the analytes are monitored at 225 nm. Paroxetine was used as internal standard. The assay results were linear from 25 to 75 μg mL⁻¹ for olanzapine (r ² ≥ 0.995) and 100–300 μg mL⁻¹ for fluoxetine (r ² ≥ 0.995), showed intra- and inter-day precision less than 1.0%, and accuracy of 97.7–99.1% and 97.9–99.0%. LOQ was 0.005 and 0.001 μg mL⁻¹ for olanzapine and fluoxetine, respectively. Separation was complete in less than 10 min. Validation of the method showed it to be robust, precise, accurate and linear over the range of analysis.     

Development of a Validated Stability-Indicating LC Method for Nitazoxanide in Pharmaceutical Formulations

A reversed-phase liquid chromatographic (LC) method was developed for the assay of nitazoxanide (NTZ) in solid dosage formulations. An isocratic LC separation was performed on a Phenomenex Synergi Fusion C₁₈ column (250 mm × 4.6 mm, i.d., 4 μm particle size) using a mobile phase of 0.1% o-phosphoric acid solution, pH 6.0: acetonitrile (45:55, v/v) at a flow rate of 1.0 mL min⁻¹. Detection was achieved with a photodiode array detector at 240 nm. The detector response for NTZ was linear over the concentration range from 2 to 100 μg mL⁻¹ (r = 0.9999). The specificity and stability-indicating capability of the method were proved using stress conditions. The RSD values for intra-day precision were less than 1.0% for tablets and powder for oral suspension. The RSD values for inter-day precision were 0.6 and 0.7% for tablets and powder for oral suspension. The accuracy was 100.4% (RSD = 1.8%) for tablets and 100.9% (RSD = 0.3%) for powder for oral suspension. The limits of quantitation and detection were 0.4 and 0.1 μg mL⁻¹. There was no interference of the excipients on the determination of the active pharmaceutical ingredient. The proposed method was precise, accurate, specific, and sensitive. It can be applied to the quantitative determination of drug in tablets and powder for oral suspension.     

Stereospecific analysis of flurbiprofen and its major metabolites in plasma and urine by chiral-phase liquid chromatography

Summary Direct chiral-phase HPLC methods have been developed for the determination of flurbiprofen and its major metabolites, namely 4′-hydroxyflurbiprofen and 3′-hydroxy-4′-methoxyflurbiprofen, in biological fluids using a derivatized amylose chiral stationary phase (CSP; Chiral-pak AD). Quantification of all three analytes, both free and conjugated, in urine was carried out following liquid-liquid extraction using tandem ultraviolet (UV) and fluorescence detection. Determination of flurbiprofen and the 4′-hydroxy-metabolite in plasma utilized the same CSP but required modification in the mobile phase composition and sole use of fluorescence detection. The urine assay was linear (r>0.998) between 0.05–10 μg mL⁻¹, 0.1–20 μg mL⁻¹ and 0.01–2 μg mL⁻¹ for the enantiomers of flurbiprofen, 4′-hydroxyflurbiprofen and 3′-hydroxy-4′-methoxyflurbiprofen respectively. The plasma assay was linear (r>0.997) between 0.1–6 μg mL⁻¹ and 0.01–0.6 μg mL⁻¹ for the enantiomers of flurbiprofen and 4′-hydroxyflurbiprofen respectively. Both assays, typically yielded within- and between-day imprecision and accuracy values less than 10% for the enantiomers of the different analytes. Initial volunteer studies suggest that the disposition of flurbiprofen displays modest enantioselectivity in humans.     

Isocratic Reversed-Phase HPLC for Simultaneous Separation and Determination of Seven Antiepileptic Drugs and Two of their Active Metabolites in Human Plasma

A simple reversed-phase high-performance liquid chromatographic (HPLC) method has been developed for the simultaneous determination of the antiepileptic drugs (AEDs) zonisamide (ZNS), primidone (PRI), lamotrigine (LTG), phenobarbital (PB), phenytoin (PHT), oxcarbazepine (OXC), and carbamazepine (CBZ) and two of their active metabolites, monohydroxycarbamazepine (MHD) and carbamazepine 10,11-epoxide (CBZE) in human plasma. Plasma (100 μL) was pretreated by deproteinization with 300 μL methanol containing 20 μg mL⁻¹ propranolol hydrochloride as internal standard. HPLC was performed on a C₈ column (4.6 mm × 250 mm; particle size 5 μm) with methanol–acetonitrile–0.1% trifluoroacetic acid, 235:120:645 (v/v), as mobile phase at a flow rate of 1.5 mL min⁻¹. ZNS, OXC, and CBZ were monitored by UV detection at 235 nm, and PRI, LTG, MHD, PB, PHT, and CBZE by UV detection at 215 nm. Relationships between response and concentration were linear over the concentration ranges 1–80 μg mL⁻¹ for ZNS, 5–50 μg mL⁻¹ for PRI, 1–25 μg mL⁻¹ for LTG, 1–50 μg mL⁻¹ for MHD, 5–100 μg mL⁻¹ for PB, 1–10 μg mL⁻¹ for CBZE, 0.5–25 μg mL⁻¹ for OXC, 1–50 μg mL⁻¹ for PHT, and 1–25 μg mL⁻¹ for CBZ. Intra-day and inter-day reproducibility were adequate (coefficients of variation were ≤11.6%) and absolute recovery ranged from 95.2 ± 6.13 to 107.7 ± 7.76% for all the analytes; for the IS recovery was 98.69 ± 1.12%. The method was proved to be accurate, reproducible, convenient, and suitable for therapeutic monitoring of the nine analytes.     

Simultaneous RP-LC Determination of Losartan Potassium, Ramipril, and Hydrochlorothiazide in Pharmaceutical Preparations

A simple, rapid, and precise reversed-phase high-performance liquid chromatographic method has been developed for simultaneous determination of losartan potassium, ramipril, and hydrochlorothiazide. The three drugs were separated on a 150 mm × 4.6 mm i.d., 5 μm particle, Cosmosil C₁₈ column. The mobile phase was 0.025 m sodium perchlorate–acetonitrile, 62:38 (v/v), containing 0.1% heptanesulphonic acid, pH adjusted to 2.85 with orthophosphoric acid, at a flow rate of 1.0 mL min⁻¹. UV detection was performed at 215 nm. The method was validated for linearity, accuracy, precision, and limit of quantitation. Linearity, accuracy, and precision were acceptable in the ranges 35–65 μg mL⁻¹ for losartan, 1.75–3.25 μg mL⁻¹ for ramipril, and 8.75–16.25 μg mL⁻¹ for hydrochlorothiazide.     

Reversed Capillary Electrochromatography: Investigation of Peak Symmetry for Eluting Curves of Solutes

Summary A clean method without use of organic solvents has been developed for isolation and high-performance liquid chromatographic (HPLC) determination of oxytetracycline (OTC) and sulphadimidine (SDD) in cow's milk. Isolation is rapid and simple—homogenization with an inorganic acid solution by means of a handy ultrasonic homogenizer, which is easy-to-use and portable, followed by centrifugation. Reversed-phase HPLC was performed on a C₄ column, with 1.25 mmol L⁻¹ succinic acid solution as mobile phase, and identification was by means of a photodiode-array detector. Separation of the analytes was achieved in less than 8 min. Significant linearity was established over the concentration range of 0.1–1.0 μg mL⁻¹ for both target compounds (r>0.99,P<0.01). Average recoveries of OTC and SDD (each spiked at 0.1–1.0 μg mL⁻¹) were ≥88.8, and inter- and intra-assay variability was ≤2.8%. The total time required for analysis of one sample was <20 min. The limits of quantitation of the method (μg mL⁻¹ in milk) were 0.044 for OTC and 0.023 for SDD. No organic solvent was used at any stage of the analysis.     

Simultaneous determination of azelaic and benzoic acids in topical preparations by liquid chromatography

Summary An isocratic, reversed-phase liquid chromatographic (LC) method has been developed for the simultaneous determination of azelaic and benzoic acids in pharmaceutical creams. The compounds were separated on a C₁₈ column (4 μm particles); the mobile phase was methanolwater, 40∶60, containing 10mm ammonium acetate and with the pH adjusted to 5.0. Detection was performed at 220 nm. The method was validated for accuracy, linearity, precision, and selectivity. Recoveries at levels corresponding to 80% to 120% of the declared content of the creams ranged from 99.5 to 101.8% and from 100.4 to 102.1% for azelaic and benzoic acids, respectively. The calibration graphs were linear in the ranges 20–1400 μg mL⁻¹ for azelaic acid (correlation coefficient,r ₁>0.99999), and 0.1–7.0 μg mL⁻¹ for benzoic acid (r>0.99998).     

HPLC Determination of DCJW in Rat Plasma and Its Application to Pharmacokinetics Studies

A high-performance liquid chromatography–UV method for determining DCJW concentration in rat plasma was developed. The method described was applied to a pharmacokinetics study of intramuscular injection in rats. The plasma samples were deproteinized with acetonitrile in a one-step extraction. The HPLC assay was carried out using a VP-ODS column and the mobile phase consisting of acetonitrile–water (80:20, v/v) was used at a flow rate of 1.0 mL min⁻¹ for the effective eluting DCJW. The detection of the analyte peak area was achieved by setting a UV detector at 314 nm with no interfering plasma peak. The method was fully validated with the following validation parameters: linearity range 0.06–10 μg mL⁻¹ (r > 0.999); absolute recoveries of DCJW were 97.44–103.46% from rat plasma; limit of quantification, 0.06 μg mL⁻¹ and limit of detection, 0.02 μg mL⁻¹. The method was further used to determine the concentration–time profiles of DCJW in the rat plasma following intramuscular injection of DCJW solution at a dose of 1.2 mg kg⁻¹. Maximum plasma concentration (C _max) and area under the plasma concentration–time curve (AUC) for DCJW were 140.20 ng mL⁻¹ and 2405.28 ng h mL⁻¹.     

A Validated HPLC Method for Simultaneous Determination of 2-Hydroxy-4-methoxybenzaldehyde and 2-Hydroxy-4-methoxybenzoic Acid in Root Organs of Hemidesmus indicus

A reverse phase HPLC method was developed and validated for the simultaneous determination of 2-hydroxy-4-methoxybenzaldehyde and 2-hydroxy-4-methoxybenzoic acid in the root extracts of Hemidesmus indicus. A comprehensive validation of the method including sensitivity, linearity, reproducibility, accuracy, limit of detection (LOD) and limit of quantification (LOQ) was conducted using the optimized chromatographic conditions. The method was found to be linear (r > 0.998) in the range of 5–350 μg mL⁻¹ for 2-hydroxy-4-methoxybenzaldehyde and for 2-hydroxy-4-methoxybenzoic acid (r > 0.999) in the range 10–300 μg mL⁻¹. The method was found to be precise with inter-day precision values (% RSD) in the ranges of 0.61–1.76% for 2-hydroxy-4-methoxybenzaldehyde and 1.3–2.8% for 2-hydroxy-4-ethoxybenzoic acid while intra-day precisions (% RSD) of two analytes were in the range of 0.41–1.07 and 0.95–2.5%. The limits of detection (LODs) for 2-hydroxy-4-methoxybenzaldehyde and 2-hydroxy-4-methoxybenzoic acid were 0.84 and 2.34 μg mL⁻¹. The described method was fast, sensitive and reproducible, and thus well suited for routine analysis of these two compounds from root extracts of H. indicus and other plants.     

Development and Validation of a Stability-Indicating LC Method for Determination of Ebastine in Tablet and Syrup

A simple stability-indicating reversed-phase liquid chromatographic method with diode-array detection was developed and validated for the quantitative determination of ebastine in tablets and syrup. The LC method was carried out on a C₁₈ column with acetonitrile:phosphoric acid 0.1% pH 3.0 (55:45, v/v) as mobile phase, at a flow rate of 1.2 mL min⁻¹. Ultraviolet detection of ebastine was at 254 nm. A linear response (r = 0.9999) was observed in the range of 10–80 μg mL⁻¹. The RSD values for intra- and inter-day precision studies showed good results (RSD < 2%) and accuracy was greater than 98%. Validation parameters such as specificity and robustness were also determined. The method was found to be stability-indicating and can be applied to quantitative determination of ebastine in tablets and syrup.     

Development and Validation of LC–MS Method for the Determination of Hydroxyzine Hydrochloride in Human Plasma and Subsequent Application in a Bioequivalence Study

A rapid, simple and specific liquid chromatography-electrospray ionization mass spectrometry method has been developed and validated for the determination of hydroxyzine hydrochloride in human plasma. Samples were separated using a Thermo Hypersil-HyPURITYC18 reversed-phase column (150 mm × 2.1 mm i.d., 5 μm). The mobile phase consisted of 50 mM ammonium acetate (pH 4.0)–methanol–acetonitrile (45:36:19, v/v). Hydroxyzine and its internal standard were measured by electrospray ion source in positive selective ion monitoring mode. The method was validated with a linear range of 1.56–200.0 ng mL⁻¹ and the lowest limit of quantification was 1.56 ng mL⁻¹ for hydroxyzine hydrochloride (r ²= 0.9991). The extraction efficiencies were about 70% and recoveries of the method were in the range of 93.5–104.4%. The intra-day relative standard deviation (RSD) was less than 8.0% and inter-day RSD was within 7.4%. QC samples were stable when kept at ambient temperature for 12 h at −20 °C for 30 days and after four freeze–thaw cycles. The method has been successfully applied to the evaluation of pharmacokinetics and bioequivalence of two hydroxyzine hydrochloride formulations in 12 healthy Chinese volunteers after an oral dose of 25 mg.     

Direct analysis of clomipramine in human plasma by microbore high performance liquid chromatography with column-switching

Summary An automated microbore, liquid chromatographic method with column-switching was developed for the determination of clomipramine from human plasma samples. After direct injection of samples (60 μL), plasma proteins and clomipramine were separated in size-exclusion mode using 20% acetonitrile in 20 mM phosphate buffer (pH 7.0) on Capcell Pak MF Ph-1 precolumn (10×4 mm I.D.). By valve switching, a fraction containing clomipramine was directed to an intermediate column for subsequent main separation on a microbore C₁₈ column (250×1.5 mm I.D.) using 50% acetonitrile in 20 mM phosphate buffer (pH 2.5) at 0.1 mL min⁻¹. The method was advantageous for rapidity (total analysis time: 15 min), reproducibility (C.V.<4.8%), and increased sensitivity (1 ng mL⁻¹). The linearity of response was good (r ²≥0.999) over the concentration range 1–250 ng mL⁻¹.     

LC Determination of Gemfibrozil in Tablets

A simple, selective, precise and accurate reversed phase-HPLC assay for analysis of gemfibrozil in tablets was developed and validated. Separation and quantification were achieved on a Phenomenex C₁₈ column under isocratic conditions using a mobile phase (methanol:water, 80:20, v/v) maintained at 1.1 mL min⁻¹. UV-detection was at 280 nm. Atorvastatin was selected as an internal standard. The standard curves were linear over the range of 0.5–3.0 μg mL⁻¹ (r > 0.999). The limits of detection and quantification were 0.20 and 0.51 μg mL⁻¹, respectively. The recoveries for gemfibrozil were above 99.01%. The intra-day and inter-day precision (RSD) for gemfibrozil were below 1.74 and 1.83%, respectively. No chromatographic interferences from the tablet excipients were found. The results of the developed procedure in tablets were compared with those of the reference method to assess gemfibrozil content. Statistical comparison of the results with the reference method using spectrofluorimetric method showed excellent agreement and proved no significant difference in accuracy and precision. This HPLC method is fast and simple for the analysis of gemfibrozil in pharmaceutical preparations.     

Simultaneous Determination of Baicalin, Baicalein, Wogonin, Oxysophocarpine, Oxymatrine and Matrine in the Chinese Herbal Preparation of Sanwu-Huangqin-Tang by Ion-Paired HPLC

A sensitive and reliable ion-paired high-performance liquid chromatographic method has been established for the simultaneous quantification of six major active ingredients, namely baicalin, baicalein, wogonin, oxysophocarpine, oxymatrine and matrine in the Chinese herbal preparation, Sanwu-Huangqin-Tang. HPLC analyses were performed on a Phenomenex luna C₁₈ column with mobile phase of methanol–acetonitrile–aqueous phosphoric acid at a flow rate of 0.9 mL min⁻¹. The complete separation was achieved within 35 min for the six target constituents. A good linear regression relationship between peak-areas and concentrations was obtained over the range of 12.10–242.0 μg*mL⁻¹ for baicalin, 5.05–101.0 μg*mL⁻¹ for baicalein, 0.95–19.0 μg*mL⁻¹ for wogonin, 2.75–55.0 μg*mL⁻¹ for oxysophocarpin, 2.75–55.0 μg*mL⁻¹ for oxymatrine and 4.90–98.0 μg*mL⁻¹ for matrine, respectively. The repeatability was evaluated by intra- and inter-day assays with relative standard deviation (RSD) being less than 5.1%. The recoveries, measured at three concentration levels, varied from 93.8 to 102.1%. The assay was successfully applied for determination of six bioactive compounds in Sanwu-Huangqin-Tang. The interaction of chemical constituents was observed when the herbs were used in compatibility. The results indicated that the developed assay method was rapid, accurate and could be readily utilized as a quality control method for Sanwu-Huangqin-Tang.     

Simultaneous Determination of Acteoside, Astragaloside IV and Icariside-I in the Traditional Chinese Medicinal Preparation Shenbao by HPLC–MS

A liquid chromatography–electrospray (ES)–mass spectrometric method for the simultaneous determination of Acteoside, Astragaloside IV and Icariside-I in the Traditional Chinese Medicinal Preparation Shenbao tablets is described. The samples were separated on an Alltima C₁₈ column by linear gradient elution using water–acetonitrile as the mobile phase. Some operational parameters of the ESI interface were optimized. The method is linear over the range of 0.1–10μg mL⁻¹ for Acteoside, Astragaloside IV, and 0.03–3μg mL⁻¹ for Icariside-I. The method has a precision (%CV) of <20%, and an accuracy (%RE) of < ± 10%. It can be used as a complementary method for quality control of Shenbao Tablets while HPLC–UV can be used for the other main components (Icariin, Icariside-II, Psoralen, Isopsoralen, and Osthol).     

Liquid chromatographic determination of meloxicam in serum after solid phase extraction

A liquid chromatographic method for the determination of meloxicam in serum has been developed. The technique includes a solid phase extraction of the serum samples on [poly (divinylbenzeneco-N-vinylpyrrolidone)] as a solid phase extraction sorbent. After conditioning, the cartridge was loaded with 1 mL of acidified serum containing an internal standard. Elution was carried out using 1 mL of water-acetonitrile (φ _r = 1: 1) mixture. After evaporation of the eluate to dryness and reconstitution of the residue with 0.1 mL of methanol, the samples were analyzed on a Symmetry C18 column. Mobile phase consisted of 1 % aqueous acetic acid/THF/acetonitrile (φ _r = 60: 30: 10) + 0.1 mL of 1-octane sulfonic acid. Detection was carried out using a photodiode array detector. Full validation of the proposed method is provided. Linearity of the method was proven over the range of 0.01–10 φg mL⁻¹ of meloxicam. Meloxicam assay was accurate and reliable with average intra- and inter-day precisions lower than 5.0 % and the intra- and inter-day accuracy higher than 97 %. Limits of detection (LOD) and quantitation (LOQ) found were 0.003 μg mL⁻¹ and 0.01 μg mL⁻¹, respectively. The proposed method was successfully utilized to quantify meloxicam in serum.     

Determination and Validation of an LC Method for Fluvoxamine in Tablets

A new, simple, rapid and specific reversed-phase high-performance liquid chromatography (HPLC) method was developed and validated for the determination of fluvoxamine in pharmaceutical dosage forms. The HPLC separation was achieved on a C₁₈ μ-Bondapack column (250 mm × 4.6 mm) using a mobile phase of acetonitrile–water (80:20, v/v) at a flow rate of 1 mL min⁻¹. Proposed method is based on the derivatization of fluvoxamine with 1,2-naphthoquinone-4-sulphonic acid sodium salt (NQS) in borate buffer of pH 8.5 to yield a orange product. The HPLC method is based on measurement of the derivatized product using UV-visible absorbance detection at 450 nm. The method was validated for specificity, linearity, precision, accuracy, robustness. The degree of linearity of the calibration curves, the percent recoveries of fluvoxamine, the limit of detection and quantification, for the HPLC method were determined. The assay was linear over the concentration range of 45–145 ng mL⁻¹ (r = 0.9999). Limit of detection and quantification for fluvoxamine were 15 and 50 ng mL⁻¹, respectively. The results of the developed procedure (proposed method) for fluvoxamine content in tablets were compared with those by the official method. The method was found to be simple, specific, precise, accurate, reproducible and robust.     

Resolution of an intense sweetener mixture by use of a flow injection sensor with on-line solid-phase extraction

An integrated solid-phase spectrophotometry–FIA method is proposed for simultaneous determination of the mixture of saccharin (1,2-benzisothiazol-3(2H)-one-1,1-dioxide; E-954) (SA) and aspartame (N-l-α-aspartyl-l-phenylalanine-1-methyl ester; E-951) (AS). The procedure is based on on-line preconcentration of AS on a C₁₈ silica gel minicolumn and separation from SA, followed by measurement, at λ=210 nm, of the absorbance of SA which is transiently retained on the adsorbent Sephadex G-25 placed in the flow-through cell of a monochannel FIA setup using pH 3.0 orthophosphoric acid–dihydrogen phosphate buffer, 3.75×10^–3 mol L⁻¹, as carrier. Subsequent desorption of AS with methanol enables its determination at λ=205 nm. With a sampling frequency of 10 h⁻¹, the applicable concentration range, the detection limit, and the relative standard deviation were from 1.0 to 200.0 μg mL⁻¹, 0.30 μg mL⁻¹, and 1.0% (80 μg mL⁻¹, n=10), respectively, for SA and from 10.0 to 200.0 μg mL⁻¹, 1.4 μg mL⁻¹, and 1.6% (100 μg mL⁻¹, n=10) for AS. The method was used to determine the amounts of aspartame and saccharin in sweets and drinks. Recovery was always between 99 and 101%. The method enabled satisfactory determination of blends of SA and AS in low-calorie and dietary products and the results were compared with those from an HPLC reference method.     

Simple, Sensitive, and Rapid LC–ESI-MS Method for Quantification of Mitiglinide in Human Urine

A sensitive and specific liquid chromatographic method with electrospray ionization mass spectrometry (LC–ESI-MS) has been developed and validated for identification and quantification of mitiglinide in human urine. A simple liquid–liquid extraction procedure was followed by separation on a C₁₈ column with gradient elution, and detection using a single-quadrupole mass spectrometer in selected-ion-monitoring (SIM) mode. The method was tested using six different batches of urine. Linearity was established for the mitiglinide concentrations in the range 0.005–1.0 μg mL⁻¹, with a coefficient of determination (r) of 0.9998 and good back-calculated accuracy and precision. Intra- and inter-day precision (as RSD, %) was below 10% and accuracy for mitiglinide ranged from 85 to 115%. The lower limit of quantification was reproducible at 0.002 μg mL⁻¹ for 500 μL urine. The proposed method enables unambiguous identification and quantification of mitiglinide in pre-clinical and clinical studies.     

Application of a Validated, Stability-Indicating LC Method to Stress Degradation Studies of Ramipril and Moexipril.HCl

A stability-indicating reversed-phase liquid chromatographic (RPLC) method has been established for analysis of ramipril (RAM) and moexipril hydrochloride (MOEX.HCl) in the presence of the degradation products generated in studies of forced decomposition. The drug substances were subjected to stress by hydrolysis (0.1 m NaOH and 0.1 m HCl), oxidation (30% H₂O₂), photolysis (254 nm), and thermal treatment (80 °C). The drugs were degraded under basic and acidic conditions and by thermal treatment but were stable under other stress conditions investigated. Successful separation of the drugs from the degradation products was achieved on a cyanopropyl column with 40:60 (v/v) aqueous 0.01 m ammonium acetate buffer (pH 6)–methanol as mobile phase at a flow rate of 1 mL min⁻¹. Detection was by UV absorption at 210 nm. Response was a linear function of concentration over the range 5–50 μg mL⁻¹ (r > 0.9995), with limits of detection and quantitation (LOD and LOQ) of 0.04 and 0.09 μg mL⁻¹, respectively, for RAM and 0.014 and 0.32 μg mL⁻¹, respectively, for moexipril. The method was validated for specificity, selectivity, solution stability, accuracy, and precision. Statistical analysis proved the method enabled reproducible and selective quantification of RAM and MOEX as the bulk drug and in pharmaceutical preparations. Because the method effectively separates the drugs from their degradation products, it can be used as stability-indicating.