固/液界面现场光谱电化学

固/液界面现场光谱电化学的方法包括各种电磁波透射和反射谱(紫外可见、拉曼、红外、X-光等)、磁共振谱(ESR、NMR)以及80年代发展起来的扫描显微谱(STM等)和非线性反射光谱(SHG)等等。固/液界面现场光谱电化学已渗透到固/液界面和电极表面结构,分子水平上的吸脱附和反应机理,电催化和反应动力学等许多研究领域。本文结合文献对上述几个方面以及固/液界面现场光谱电化学的发展方向进行综述。     

电化学谱学表征方法的应用与发展

经历两个多世纪的发展,电化学表征方法的理论和实验研究不断完善,在表界面精细结构表征、电化学反应机理研究等方面起到重要作用。电化学谱学表征技术的出现,填补了传统电化学表征方法在分子水平上鉴定电化学反应活性位点及中间物种的空白。本文总结了近年来红外光谱(IR)、表面增强拉曼光谱(SERS)及和频振动光谱(SFG)三种经典分子振动光谱电化学表征技术的研究进展。首先介绍了三种光谱的基本原理和电化学联用电解池的设计,然后从基础电化学理论出发,介绍其在模型单晶体系及界面水机理研究中的应用,进一步重点介绍了其在锂离子电池和燃料电池领域的相关研究进展,最后展望了电化学谱学表征技术的未来发展方向。     

一种新型低带隙共轭聚合物的合成及其光学性质

在钯催化剂作用下, 通过4,7-二(5-溴-2-噻吩基)[2,1,3]苯并噻二唑与2,5-二乙炔基-3-辛基噻吩的偶联反应, 合成了一种新的共轭高分子聚4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔(PTE-DTBT). 通过紫外可见吸收光谱及荧光光谱对其光学性质进行了研究. 紫外-可见吸收谱结果表明, PTE-DTBT的固体膜光学带隙为1.71 eV; 电化学测试其带隙为1.88 eV. TiO₂/PTE-DTBT共混固体膜的荧光发射谱结果表明电子供体PTE-DTBT分子与电子受体TiO₂分子间存在有效的电子转移.     

微机化紫外可见区现场光谱电化学联用测量系统的研制

本文报道了由微机控制的紫外可见区现场(in situ)光谱电化学联用测量系统的硬件和软件设计。该系统可以测量电化学调制反射光谱,光电流谱和光电容谱,并可实现同一实验体系的同时联合测量,这些功能均由计算机软件完成。该系统已应用于金属、半导体、半导电氧化膜电极/溶液界面行为的研究,得到了一些新的实验结果。     

一种含二茂铁基的多枝状分子的合成、表征及其性质研究

采用新的方法合成了一种二茂铁衍生物——均三（二茂铁乙烯基）苯，通过元素分析、红外光谱、核磁共振氢谱、质谱、紫外可见光谱等对其进行了表征。用循环伏安法对其电化学性质进行了初步研究，用Z-扫描技术测试了它的非线性光学性能。结果表明，该化合物具有良好的电化学及非线性光学性质。     

现场光谱电化学研究的新进展

电化学以两个凝聚相的荷电界面为其主要研究对象．它广泛地应用于能源、材料等重要科学领域，并对生命科学的发展发挥着重要作用［1，2］．为了从分子水平上深化对电化学界面的认识，自七十年代中至八十年代初采用了紫外可见反射、拉曼和红外光谱技术对电化学体系进行现场（in-situ，又称原位）研究，开创了光谱电化学新领域[3,4]．光谱电化学在／＼十年代发展迅速，推动电化学研究由宏观进入微观、由统计平均深入至分子水平【‘一刀．近年来，随着各种光谱仪器性能的提高以及非线性光谱等新技术的发展，现场光谱电化学研究不断拓宽新领域，…     

核黄素的薄层荧光光谱电化学研究

光谱检测技术和电化学手段密切结合起来的光谱电化学方法,加上薄层池的整体快速电解,已成为化学工作者的重要研究手段［１］．目前紫外可见透射光谱检测方法多采用铂、金、石墨等的网栅为工作电极,对其透光度及强度均有一定要求,操作不便,池也不易清洗［２］;并且由...     

含多个氧化还原中心的卟啉化合物的电化学及光谱电化学行为(Ⅰ)

在DMF及DMSO中用循环伏安法、现场紫外可见光谱电化学方法及现场FT-IR光谱电化学方法研究了含多个氧化还原中心的卟啉化合物[四(对-硝基苯基)卟啉合钴(Ⅱ)]的氧化还原性质。指出该化合物的第一步氧化或第一步还原为中心金属钴失去或得到1个电子;第二步还原为卟啉环meso位的4个对硝基苯基上的硝基在同一电位下各得1个电子,形成相应的阴离子自由基;第三步还原为卟啉环得到1个电子,但该步反应不可逆。同时发现硝基与卟啉环及中心金属钴之间存在分子内电子相互作用,而4个硝基取代基之间未发现分子内电子相互作用。     

含多个氧化还原中心的卟啉化合物的电化学及光谱电化学行为(Ⅰ)

在DMF及DMSO中用循环伏安法、现场紫外可见光谱电化学方法及现场FT-IR光谱电化学方法研究了含多个氧化还原中心的卟啉化合物[四(对-硝基苯基)卟啉合钴(Ⅱ)]的氧化还原性质。指出该化合物的第一步氧化或第一步还原为中心金属钴失去或得到1个电子；第二步还原为卟啉环meso位的4个对硝基苯基上的硝基在同一电位下各得1个电子,形成相应的阴离子自由基；第三步还原为卟啉环得到1个电子,但该步反应不可逆。同时发现硝基与卟啉环及中心金属钴之间存在分子内电子相互作用,而4个硝基取代基之间未发现分子内电子相互作用。     

咪唑修饰的卟啉及其锌、铜配合物的合成和非线性光学性质

合成了一种新型咪唑修饰的卟啉(1)及其锌、铜配合物(2、3). 通过核磁共振氢谱(1H NMR)、紫外-可见(UV-Vis)光谱、傅里叶变换红外(FT-IR)光谱、电喷雾质谱(ESI-MS)及元素分析等多种谱学方法对其结构进行表征. 卟啉环流效应对侧链咪唑芳环的影响导致咪唑环上三个氢原子的化学位移向高场移动, 且卟啉的紫外-可见光谱的Soret带发生裂分. 采用分子模拟方法得到的自由卟啉最低能量构象与光谱分析结果一致, 即侧链咪唑环位于卟啉环上方. 同时, 利用Z-扫描技术对卟啉及其锌、铜配合物的三阶非线性光学性质进行了研究, 结果表明: 卟啉及其锌、铜配合物均具有很强的反饱和吸收性质, 且铜卟啉的非线性光学性质强于锌卟啉的.     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.     

LixZryOz三元化合物的制备及表征

采用高温固相法制备了4种高纯度晶相组成的LixZryOz三元化合物,研究了焙烧温度、时间、反应物的种类和初始反应物物质的量比对产物组成的影响,进一步用XRD、SEM及BET分析方法对产物的晶相结构、表面形貌及比表面积进行了表征.实验结果表明,Li2CO3与ZrO2在适当条件下可以合成得到单斜相Li3ZrO3;以LiOH替代Li2CO3,在适当条件下可以分别合成得到四方相Li2ZrO3和三斜/单斜相Li6Zr2O7;进一步以Zr(NO3)4·5H2O代替Zr02,可将单斜相Li6Zr2O7的制备时间由96 h缩短至24 h.SEM照片显示产物硬团聚明显,粒径分布在1～10μm间,BET分析表明样品比表面积处于1.0～9.0 m2·g-1间分布,反应过程中锂的过量以及长时间高温焙烧是引起产物粒径长大和产生硬团聚的主要原因.