Simultaneous displacement of a nitro group during coupling of diazotized <Emphasis Type="Italic">o</Emphasis>-nitroaniline with phenols

During the diazo-coupling reaction, nucleophilic displacement of a nitro group was also observed. This was the main reaction (1→7) when the starting amine bore either a chlorine or methoxy group at the para position (1b–c). The newly prepared compounds (7) might serve as convenient building blocks in synthesis of some heterocycles.      

Voltammetric determination of dopamine in the presence of ascorbic and uric acids using partial least squares regression: determination of dopamine in human urine and plasma

A new differential pulse voltammetric method for dopamine determination at a bare glassy carbon electrode has been developed. Dopamine, ascorbic acid (AA) and uric acid (UA) usually coexist in physiological samples. Because AA and UA can be oxidized at potentials close to that of DA it is difficult to determine dopamine electrochemically, although resolution can be achieved using modified electrodes. Additionally, oxidized dopamine mediates AA oxidation and the electrode surface can be easily fouled by the AA oxidation product. In this work a chemometrics strategy, partial least squares (PLS) regression, has been applied to determine dopamine in the presence of AA and UA without electrode modification. The method is based on the electrooxidation of dopamine at a glassy carbon electrode in pH 7 phosphate buffer. The dopamine calibration curve was linear over the range of 1–313 μM and the limit of detection was 0.25 μM. The relative standard error (RSE %) was 5.28%. The method has been successfully applied to the measurement of dopamine in human plasma and urine.      

Dispersive liquid-liquid microextraction and liquid chromatographic determination of pentachlorophenol in water

A simple and sensitive dispersive liquid-liquid microextraction method for extraction and preconcentration of pentachlorophenol (PCP) in water samples is presented. After adjusting the sample pH to 3, extraction was performed in the presence of 1% W/V sodium chloride by injecting 1 mL acetone as disperser solvent containing 15 μL tetrachloroethylene as extraction solvent. The proposed DLLME method was followed by HPLC-DAD for determination of PCP. It has good linearity (0.994) with wide linear dynamic range (0.1–1000 μg L⁻¹) and low detection limit (0.03 μg L⁻¹), which makes it suitable for determination of PCP in water samples.      

Electrochemical oxidation of methylthiomethyleneisoquinolinium chloride — the first water soluble alkylthiomethylene substituted ammonium salt

Electrochemical oxidation of methylthiomethyleneisoquinolinium chloride (MTMIQ), the first alkylthiomethyl substituted ammonium salt, which is fully miscible with water has been investigated by voltammetric (SWV) method using glassy carbon electrode. On the electrode, MTMIQ undergoes oxidation at the potential near Ep = 0.07V (vs. Ag/AgCl/3 M KCl). The influence of the pH of buffers, amplitude, frequency, step potential on the received signal was studied. The best results were obtained with a citrate buffer at a pH of 5. The oxidation peak current used for MTMIQ voltammetric determination was in the range of 2–8×10⁻⁵ mol L⁻¹, LOD = 3.7×10⁻⁶, LOQ = 1.2×10⁻⁵. The product of the oxidation was accumulated at the working electrode and was investigated by spectroscopic method. Mechanistic pathways of the oxidation have been proposed.      

Properties of ibuprofen ion-selective electrodes based on the ion pair complex of tetraoctylammonium cation

Ibuprofen membrane electrodes based on different plasticizers: diisobutyl phthalate (DIBP), o-nitrophenyloctyl ether (o-NPOE), dioctyl sebacate (DOS) and tetraoctylammonium 2-(4-isobutylphenyl)propionate were prepared. All electrodes show: a near Nernstian slope of characteristic (58.3–60.9 mV decade⁻¹) in the measurement range (10⁻⁴–10⁻¹ mol L⁻¹), limit of detection (5.0×10⁻⁵ mol L⁻¹), really long lifetime (12 months), dependence of the electrode potential on pH (5.5–9.0), reproducibility of potential (0.6–1.2 mV) and selectivity coefficients in relation to some organic and inorganic anions. The electrodes were applied for the determination of ibuprofen in tablets by the calibration curve method and the standard addition method.      

Voltammetric determination of some alkaloids and other compounds in pharmaceuticals and urine using an electrochemically activated glassy carbon electrode

Electrochemical behaviour of some alkaloids, namely: caffeine, aminophylline, theophylline, codeine phosphate and papaverine hydrochloride, that are in solution in various combinations or in the presence of other compounds contained in pharmaceuticals or in real samples (urine) was investigated using cyclic voltammetry (CV), square-wave voltammetry (SWV) and differential pulse voltammetry (DPV) on electrochemically activated glassy carbon electrode.      

Carbon paste electrodes in the new millennium

In this review (with 500 refs), both electrochemistry and electroanalysis with carbon paste-based electrodes, sensors, and detectors are of interest, when attention is focused on the research activities in the years of new millennium. Concerned are all important aspects of the field, from fundamental investigations with carbon paste as the electrode material, via laboratory examination of the first electrode prototypes, basic and advanced studies of various electrode processes and other phenomena, up to practical applications to the determination of inorganic ions, complexes, and molecules. The latter is presented in a series of extensive tables, offering a nearly complete survey of methods published within the period of 2001–2008. Finally, the latest trends and outstanding achievements are also outlined and future prospects given.      

ZrOCl<Subscript>2</Subscript> · 8H<Subscript>2</Subscript>O: An efficient catalyst for rapid one-pot synthesis of 3-carboxycoumarins under ultrasound irradiation in water

In this report, a rapid, efficient and environmental friendly synthesis of 3-carboxycoumarins under ultrasound irradiation in water media is described. The Knoevenagel condensation of Meldrum’s acid with substituted benzaldehydes in the presence of zirconium oxide chloride (ZrOCl₂·8H₂O) and ultrasonic irradiation in water gave the corresponding 3-carboxycoumarins in good to excellent yields.      

Ionic liquid promoted Diels-Alder Reaction between anthrone and maleimides

Ionic liquids (IL) are gaining importance as green solvents. Imidazolium ionic liquid [bmim]⁺[Cl]⁻, an environmentally benign solvent, was found to promote the Diels-Alder reaction between anthrone and maleimides at room temperature with excellent yields. The ionic liquid played a dual role as solvent and catalyst.      

Indirect determination of lutetium by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode

Lutetium has been determined by differential pulse anodic stripping voltammetry in an acidic solution containing Zn-EDTA. Lutetium (III) ions liberated zinc (II), which was preconcentrated on a hanging mercury drop electrode and stripped anodically, resulting in peak current linearly dependent on lutetium (III) concentration. Less than 0.4 ng mL⁻¹ lutetium could be detected after a 2 min deposition.      

Palladium-catalyzed amination of quinaldine-5-triflate

Palladium-catalyzed amination reactions of quinoline triflate and the effect of a Pd catalyst, its ligands, solvents, bases, and temperature were studied. This method facilitated an easier pathway for the preparation of aminoquinoline derivatives as potential precursors of new serotoninerg agents.      

Properties of naproxen ion-selective electrodes

Naproxen membrane electrodes based on different plasticizers and the quaternary ammonium salts (QASs) dimethyldidecylammonium bromide, methyltrioctylammonium chloride, or tetraoctylammonium chloride, were prepared. The following basic parameters were investigated for the optimal electrode: measurement range (10⁻⁴ − 10⁻¹ mol L⁻¹), slope of the linear range of the calibration curve (−58.3 mV decade⁻¹), limit of detection (6.0 × 10⁻⁵ mol L⁻¹), lifetime (2.5 months), dependence of the electrode potential on pH (5.5 − 9.0), reproducibility of potential (1.2 mV) and selectivity coefficients in relation to selected organic and inorganic anions. The electrode was utilized for determination of naproxen in tablets by the calibration curve method and the standard addition method.      

Cobalt(II) ion-selective electrode with solid contact

A new all plastic sensor for Co²⁺ ions based on 2-amino-5 (hydroxynaphtyloazo-1′)-1,3,4 thiadiazole (ATIDAN) as ionophore was prepared. The electrode exhibits a low detection limit of 1.5 × 10⁻⁶ mol L⁻¹ and almost theoretical Nernstian slope in the activity range 4.0 × 10⁻⁶–1 × 10⁻¹ mol L⁻¹ of cobalt ions. The response time of the sensor is less than 10 s and it can be used over a period of 6 months without any measurable divergence in potential. The proposed sensor shows a fairly good selectivity for Co(II) over other metal ions. The electrode was successfully applied for determination of Co²⁺ in real samples and as an indicator electrode in potentiometric titration of Co²⁺ ions with EDTA.      

Characterization of sorption gels used for determination of mercury in aquatic environment by diffusive gradients in thin films technique

The influence of pH, ionic strength and selected natural ligands on the measurement of mercury by the diffusive gradients in thin films technique (DGT) using recently introduced sorption gels was determined. Sorption gels containing Chelex 100, Spheron-Thiol, Duolite GT73 and modified Iontosorb AV resins were investigated, with the sorption capacity determined for all used sorption gels. The minimum DGT measurable concentrations were calculated from 3 times the standard deviation of mercury amount in unexposed sorption gels.      

Structure and spectal properties of cinnamoyl pyrones and their vinylogs

The ¹H-NMR and quantum chemical analysis of the stability of tautomers of cinnamoyl pyrone derivatives and vinylogs has been studied. The relationship between the structure of the most stable tautomer and its spectral properties has been investigated. It has been determined that the tautomer of highest stability (88–100 molar %) has an α-pyrone structure and exhibits a trans-conformation in the cinnamoyl fragment. An intense fluorescence of dyes has been observed in non-polar solvents with cinnamoyl fragments having electron-donating substituents or several double bonds in the polymethine chain. A gradient in solvent polarity resulted in fluorescence quenching which permits the use of the dyes as intensometric fluorometric probes for medium polarity examination.      

Ion-exchange studies on poly-o-anisidine Sn(IV) phosphate nano composite and its application as Cd(II) ion-selective membrane electrode

An organic-inorganic composite, poly-o-anisidine Sn(IV) phosphate, was chemically synthesized by mixing ortho-anisidine into gels of Sn(IV) phosphate with different mixing volume ratios. Studies on the effect of eluant concentration, elution behavior and separation of metal ions were carried out to understand the ion-exchange capabilities. Due to Cd(II) selective nature of composite, revealed by distribution studies, Cd(II) ion selective membrane electrode was fabricated. The analytical utility of the electrode was established by employing it as an indicator electrode in electrometric titrations having fast response time, 3–5s, and long life span of six months. Some physical parameters like self-diffusion coefficient (D₀), activation energy (E_a) and entropy of activation (ΔS₀) have been evaluated under conditions favoring a particle diffusion-controlled mechanism by studying ion-exchange kinetics.      

Protolytic properties of the structurally rigid analogs of 2,6-distyrylpyridine. Widening the pH sensitivity range by the photochemical E→Z isomerisation and introduction of substituents capable to protolytic interactions

Protolytic interactions in the series of prospective fluorescent ratiometric wide-range pH indicators — structurally rigid analogs of 2,6-distyrylpyridine — (3E,5E)-3,5-dibenzylidene-8-phenyl-1,2,3,5,6,7-hexahydrodicyclopentano[b,e]pyridine — were investigated. The pyridine nitrogen atom basicity in these compounds is significantly lower in comparison with that of unsubstituted heterocycle and 2,6-distyrylpyridine. The photochemical E→Z photoisomerization and the side benzene rings substituents influence on the acid-base equilibria were studied. The complex multi-stage mechanism of the acid-base interactions of the polysubstituted compounds was elucidated. The most significant spectral effects were typical to the N,N-dialkylamino substituted compounds of the investigated series. The widest pH sensitivity interval covering nearly the full range of 0–14 units was demonstrated for compounds with both proton donor and proton acceptor substituents.      

Copper (II) chloride / tetrabutylammonium bromide catalyzed oxidation of 2,6-diisopropylnaphthalene and 4,4′-diisopropylbiphenyl

The oxidation processes of 2,6-diisopropylnaphthalene and 4,4′-diisopropylbiphenyl with oxygen in the presence of a catalyst, composed of copper(II) chloride and tetrabutylammonium bromide, were investigated. It was found that, in essence, only one isopropyl group undergoes oxidation, and obtained mixtures contained mainly peroxide, alcohol, ketone and only small amounts of hydroperoxide.      

Interaction of serum albumin with vinyl sulfonate azo dye

The interaction between bovine serum albumin and the mono azo reactive dye Orange ZT has been investigated using absorption difference spectroscopy. The influence of pH and ionic strength of the solution on the stability of the dye-protein complex has been determined. At 25°C, the complex dissociation constants were equal to 24.0, 28.0, 7.0, 11.0, 17.6 and 46.0 μM at pH 7.0, 6.5, 6.0, 5.5, 5.0 and 4.3, respectively. In the presence of 0.1, 0.2, 0.3 M KCl, at pH 6.0 and 25°C, the complex dissociation constants were 8.8, 20.0, 18.0 μM, respectively. The protein-dye complex dissociation constants show that Orange ZT could be used as an affinity ligand for protein purification.      

Voltammetric and amperometric determination of metoclopramide on boron-doped diamond film electrode

New methods for the determination of metoclopramide, antiemetic and gastroprokinetic pharmaceutical, were developed, using differential pulse voltammetry (DPV) and flow injection analysis (FIA) with amperometric detection on a boron-doped diamond film electrode. Electrode pretreatment necessary to ensure the stable results was investigated and it was found, that while DPV requires frequent electrode cleaning, FIA with a sufficiently high flow rate can maintain a stable signal with no signs of electrode passivation. The calculated quantification limits of the DPV and FIA with amperometric detection were 0.13 μmol L⁻¹ and 0.015 mmol L⁻¹, respectively. The applicability of the new methods was verified by the determination of metoclopramide in a pharmaceutical preparation. FIA with amperometic detection proved to be sensitive, accurate and, due to the resistance of the electrode to the passivation, also simple to handle.