K改性的Pt/Al2O3催化剂上CO氧化反应：反应动力学和红外光谱研究

CO氧化不仅具有重要的实用价值,而且在基础研究中被用于考察反应机理及催化剂结构敏感性等一些重要问题,因此,该反应在催化领域中具有重要意义. Pt基催化剂被广泛应用于CO氧化反应.其催化活性取决于催化剂的制备方法.其中,碱金属如Na、K等助剂的添加可有效促进催化活性,红外光谱证据表明,其促进作用在于碱金属的添加可降低CO与表面Pt原子的相互作用.尽管如此,催化剂上反应动力学证据却十分缺乏.反应动力学的研究可以提供一些本证反应信息如反应基元步骤、反应速率表达式以及反应机理等.通过对比不同催化剂之间的反应动力学行为,可以进一步解释碱金属对催化剂结构以及反应行为的影响.因此在本工作中,我们制备了一系列以K为助剂的Pt/Al2O3催化剂,并进行了CO氧化的反应动力学研究,考察了助剂对CO反应级数和反应活化能的影响.结合原位红外光谱表征,进一步揭示了助剂在反应中的作用.通过对比不同Pt和K含量的催化剂上CO氧化反应活性,我们发现, K的添加能促进反应活性,且随着催化剂中K含量的增加,促进程度越明显.例如,0.42K-2Pt/Al2O3上T50温度比对应的2Pt/Al2O3降低了30oC.不同催化剂上CO氧化的反应动力学实验表明,反应速率随着CO的分压的增加而降低;但随着O2分压的增加而增大.幂函数反应速率表达式推导得到的反应级数发现,对于含K的催化剂其CO的反应级数(约为–0.2)明显比不含K的催化剂(约为–0.5)中高,说明K的添加减弱了CO与表面Pt原子之间的吸附能力.但对O2的反应级数影响较小.例如：在0.42K-2.0Pt/Al2O3上反应速率表达式为r =6.55′10–7pco–0.22po20.63;而在2.0Pt/Al2O3上为r =2.56′10–7pco–0.53po20.70.表观反应活化能的计算表明,含K的催化剂上表观反应活化能较低,进一步说明K的添加有利于反应进行.根据反应速率表达式,我们进行了基元步骤的推导,并计算了反应动力学参数.结果发现,与不含K的催化剂相比,含K的催化剂中本征反应速率常数明显增加,而CO吸附平衡常数降低了一半,表明K的存在使CO在Pt表面上的覆盖度降低.我们还通过原位红外光谱对比了催化剂上CO吸附行为的差异.数据表明,与不含K的催化剂相比, K的添加一方面降低了CO在催化剂表面的吸附量(峰面积变小);另一方面显著降低了CO在Pt表面上的脱附温度,说明两者之间的相互作用力减弱.综上所述,通过反应动力学和红外光谱实验,我们认为K助剂与表面Pt原子相互作用后生成了较为稳定的Pt–O–K物种.尽管该物种的具体结构目前还不明确,但我们的实验证据表明,该物种的存在可以有效减弱CO与表面Pt原子之间的相互作用,降低CO的表面覆盖度并有利于O2在Pt表面的竞争吸附,从而降低了表面吸附的CO与O2之间反应的能垒,促进了反应性能.     

Pt／Al_2O_3，Pd／Al_2O_3催化剂上CO氧化与表面氧脱出－恢复性能

Ｐｔ／Ａｌ_２Ｏ_３，Ｐｄ／Ａｌ_２Ｏ_３催化剂上ＣＯ氧化与表面氧脱出－恢复性能周仁贤，郑小明（杭州大学催化研究所，杭州３１００２８）关键词铂，钯，氧化铝，氧化锆，负载型催化剂，一氧化碳，氧化，氧脱附ＡＩ。Ｏ。负载的贵金属（Ｐｔ，Ｐｄ或Ｒｈ等）催化剂对有...     

STUDIES OF CATALYTIC PARTIAL OXIDATION OF METHANE TO SYNTHESIS GAS

llltcractlOllIntroductionNaturalgas.oft"hichthemajorconstituentismethane.hasbeenusedtoproduces'.nthcsisgasonalargeindustrialscaleforseveraldecades-mostl}'insteamreformingreaction(SR)t'.hichsuffersfromthedisadvantageofhighHZ/COratio(>4-whichis11otsuitablef…     

Pt/Al2O3整体催化剂上选择性氧化脱除甲醇重整氢源中CO --副反应对CO脱除效果的影响分析

移动甲醇重整制氢是质子交换膜燃料电池（PEMFC）可行的供氢方式之一,包括水蒸气重整、部分氧化重整和自热重整。甲醇重整制氢方法不同,重整气体积组成在H245％～75％,CO215％～25％,CO1％～10％,H2O10％～20％和N20—20％变化。重整气进入PEMFC之前要经过CO水蒸气变换反应（如果采用水蒸气重整,不需要变换过程）,     

掺杂ZrO＿2的Pt／Al＿2O＿3表面氧性质及一氧化碳氧化性能研究

用ＴＰＤ－ＭＳ、ＴＰＳＲ－ＭＳ及ＣＯ氧化活性测定等方法研究了Ｐｔ／Ａｌ２Ｏ３和掺杂超细ＺｒＯ２的样品的表面氧脱出－恢复性能、ＣＯ表面氧化性能及催化氧化性能．结果表明，在Ｐｔ／Ａｌ２Ｏ３中掺杂ＺｒＯ２后，样品表面上的氧物种脱出和氧化恢复性能明显提高，脱氧量也明显增大；并发现在ＣＯ－ＴＰＳＲ过程中程脱物ＣＯ２的脱附量大小及峰顶温度次序与对ＣＯ的催化氧化活性也有一致的关系     

高比表面积铝土矿载体的制备及在CO氧化反应中的应用

采用水热法,对天然铝土矿进行改性,获得高比表面积的铝土矿载体(Bauxite)。用等体积浸渍法制备了不同Pt含量的Pt/bauxite和1.0%Pt/Al2O3催化剂,以CO氧化为探针反应,考察了催化剂性能。采用XRF、XRD、低温N2-物理吸附、H2-TPR以及CO-TPD等对载体和催化剂样品进行表征。结果表明:Pt/bauxite催化剂具有优异的CO氧化性能,特别是当反应温度为200℃时,催化剂1.0%Pt/bauxite的CO转化率为93.4%,而1.0%Pt/Al2O3CO转化率仅为9.4%。其原因是铝土矿含有的Fe2O3是CO氧化反应的催化剂,且Fe2O3与负载的Pt之间发生了相互作用,降低了Pt和Fe2O3还原温度,提高了对CO的吸附能力且降低了CO的脱附温度,进而提高了催化剂的CO氧化反应性能。     

Effects of reduction temperature and metal-support interactions on the catalytic activity of Pt/gamma-Al2O3 and Pt/TiO2 for the oxidation of CO in the presence and absence of H2

TiO2- and gamma-Al2O3-supported Pt catalysts were characterized by HRTEM, XPS, EXAFS, and in situ FTIR spectroscopy after activation at various conditions, and their catalytic properties were examined for the oxidation of CO in the absence and presence of H2 (PROX). When gamma-Al2O3 was used as the support, the catalytic, electronic, and structural properties of the Pt particles formed were not affected substantially by the pretreatment conditions. In contrast, the surface properties and catalytic activity of Pt/TiO2 were strongly influenced by the pretreatment conditions. In this case, an increase in the reduction temperature led to higher electron density on Pt, altering its chemisorptive properties, weakening the Pt-CO bonds, and increasing its activity for the oxidation of CO. The in situ FTIR data suggest that both the terminal and bridging CO species adsorbed on fully reduced Pt are active for this reaction. The high activity of Pt/TiO2 for the oxidation of CO can also be attributed to the ability of TiO2 to provide or stabilize highly reactive oxygen species at the metal-support interface. However, such species appear to be more reactive toward H2 than CO. Consequently, Pt/TiO2 shows substantially lower selectivities toward CO oxidation under PROX conditions than Pt/gamma-Al2O3.     

ZrO2改性对Pt/Al2O3催化剂上CO氧化性能的影响

用流动反应法、TPR和TPD－MS等技术研究了Pt／Al2O3催化剂掺杂ZrO2体系上CO的催化氧化反应、氧物种的还原及脱出－恢复行为．结果表明，掺杂ZrO2有利于催化剂上氧物种的脱出－恢复，从而促进CO氧化活性及表面活泼氧物种与氢的反应．并用催化剂集团结构适应理论对结果作出了解释．     

Rh2CO2/Al2O3上H2吸附及CO和H2共吸附

CO加氢反应机理一直是许多化学工作者感兴趣的课题．Rh催化剂因其优良的性能而被用于 CO加氢机理研     

甲烷部分氧化制合成气反应Pt/Al_2O_3和Pt/CeO2/Al_2O_3催化剂的研究(英文)

研究了Ｐｔ／Ａｌ２Ｏ３和Ｐｔ／ＣｅＯ２／Ａｌ２Ｏ３催化剂对甲烷部分氧化制合成气反应的催化活性，发现Ｐｔ／ＣｅＯ２／Ａｌ２Ｏ３显示了比Ｐｔ／Ａｌ２Ｏ３更高的甲烷转化率和合成气选择性。用Ｈ２ＴＰＲ，Ｈ２ＴＰＤ，ＳＥＭ和ＸＲＤ等手段和技术对催化剂进行了表征。ＣｅＯ２与Ｐｔ之间存在较强的相互作用（ＳＭＳＩ），这种作用促进了Ｐｔ在催化剂表面的分散，抑制了Ｐｔ在催化剂表面的迁移，大大降低了催化剂在反应中的完全燃烧活性，提高了催化剂的部分氧化活性和选择性，避免了因催化剂床层局部温度过高而导致催化剂活性下降或失活，提高了催化剂的稳定性。同时，在反应过程中，ＣｅＯ２通过促进水蒸气变换反应（ＷＧＳＲ）的进行使反应体系迅速达到平衡，提高了催化剂对Ｈ２的选择性。     

Pt/MOx-SiO2 (M=Ce,Zr, Al)催化剂对CO和C3H8氧化性能的影响

采用共沉淀法制备质量比为1:1的MOx-SiO2(M=Ce,Zr,Al)复合氧化物,以此为载体采用浸渍法制备了铂基氧化型催化剂.考察了该系列催化剂在模拟柴油车尾气条件下,经SO2硫化前后对C3H8和CO的氧化性能.用X射线衍射(XRD)、低温N2吸附-脱附、氨气/氧气/二氧化碳程序升温脱附(NH3/O2/CO2-TPD)和X射线光电子能谱(XPS)等手段进行了表征.NH3-TPD证实催化剂表面存在多种酸中心,硫化后催化剂表面中强酸中心增多.O2-TPD证实催化剂表面存在α和β氧物种,硫化后催化剂表面氧脱附量减少.其中Pt/Al2O3-SiO2表面酸性最弱和表面氧脱附量最大.XPS结果表明新鲜催化剂经硫化后会使催化剂表面Pt的结合能降低.活性测试结果表明,三种催化剂对CO和C3H8的催化氧化活性均较好,其中Pt/ZrO2-SiO2抗SO2中毒性能最佳,具有良好的应用前景.     

焙烧温度对柴油车氧化催化剂Pt-Pd-（x）ZrO2/Ce0.3Zr0.7O2-Al2O3性能的影响

制备了氧化铝、铈锆固溶体复合氧化物负载铂、钯的双金属催化剂Pt-Pd/ Ce0.3Zr0.7O2-Al2O3,并添加3% ZrO2助剂改性,用于柴油车尾气中CO、HC和NO的催化氧化,其中贵金属负载量仅为0.68 wt%。考察了制备过程中焙烧温度对催化剂性能的影响。催化剂活性评价结果表明,与未添加ZrO2的催化剂比较。添加ZrO2明显提高了催化剂的低温氧化活性,而且焙烧温度对催化剂的氧化性能有较大影响。焙烧温度为800 ?C时,CO和C3H6的起燃温度最低,分别为168、189 ?C,焙烧温度为700 ?C时,NO转化为NO2的转化率最高,最大转化率为36%,具有较好的热稳定性。通过XRD、N2吸附-脱附、CO化学吸附、XPS、H2-TPR等表征手段考察了催化剂物理化学性质随焙烧温度的变化情况,并分析了与催化剂活性之间的关系,得到贵金属分散度、表面化学吸附氧含量、催化剂的还原性质对氧化性能有重要影响,发挥协同作用。进而可以通过优化焙烧温度提升柴油车氧化催化剂性能,对提高工业应用柴油车尾气后处理系统的净化效率有重要意义。     

红外光谱研究Pt-Re/Al2O3重整催化剂的表面结构

CO和NO吸附或两者竞争吸附在Pt／Al2O3，Re／Al2O3和Pt－Re／Al2O3催化剂上的红外光谱可以给出Pt和Re的表面结构信息．本文研究的催化剂为低金属载量的Pt／Al2O3，Re／Al2O3和工业型Pt－Re／Al2O3，其中Pt含量0．22％，Re含量0．43％（质量分数）．实验结果表明，用NO与CO双分子竞争吸附的红外光谱实验方法可分别表征还原态Pt－Re／Al2O3重整催化剂上Pt表面和Re表面，并视需要可对Pt表面和Re表面进行半定量分析．在还原态工业型Pt－Re／Al2O3重整催化剂表面上，没有明显迹象表明有Pt－Re合金形成．     

Pt－Mo／Al_2O_3和Pt－Co－Mo／Al_2O_3催化剂中Pt、Co助

利用ＴＰＲ、Ｈ_２－ＴＰＤ技术，考察了氢气氛下的Ｐｔ－Ｍｏ／Ａｌ_２Ｏ_３和Ｐｔ－Ｃｏ－Ｍｏ／Ａｌ_２Ｏ_３催化体系中物种和电荷交换的现象和规律，揭示了Ｐｔ和Ｃｏ在表面Ｍｏ物种还原过程中助剂作用的本质．Ｐｔ－Ｍｏ／Ａｌ_２Ｏ_３的ＴＰＲ、Ｈ_２－ＴＰＤ结果证明，由于微量Ｐｔ参与了表面Ｍｏ物种还原时的物种和电子交换，有效地降低了其还原温度．Ｒｔ－Ｍｏ／Ａｌ_２Ｏ_３在氢还原过程中，氢和Ｍｏ容易形成载有活动氢的氢物种，并储存在催化剂表面，这种活动氢在Ａｒ中，甚至Ａｒ－Ｈ２混合气中可以释放出来。Ｐｔ－Ｃｏ－Ｍｏ／Ａｌ２Ｏ３的研究结果表明，Ｃｏ可以进一步促进Ｍｏ的还原．在样品预还原过程中，氢和Ｃｏ可以形成氢物种，其上的氢具有更强的可动性，很容易溢流到Ｍｏ物种的边上促进其还原．根据以上规律可以推测，加氢脱硫催化剂中Ｃｏ和贵金属的作用是使催化剂更容易形成低价的配位不饱和的钼中心，也就是ＨＤＳ活性中心．     

Pt/Al2O3催化剂还原方法对Pt粒子表面性质的影响

以CO吸附红外光谱结合CO化学吸附、透射电镜和能量散射谱等手段,研究了Pt/Al₂O₃制备过程中还原方法对最终Pt粒子表面活性位分布、粒径大小和表面残余氯等表面性质的影响,重点考察了普通的气相氢气还原和甲酸钠水溶液还原两种方法的对比。结果表明,采用氢气气相还原时,Pt/Al₂O₃上Pt粒子表面台阶位和平台位比例基本不随焙烧温度而变;而采用甲酸钠水溶液还原时,Pt粒子表面台阶位所占比例随焙烧温度升高而提高。水的存在和还原条件剧烈这两个因素使得水相甲酸钠还原不利于Pt的分散,所得Pt/Al₂O₃上Pt的分散度比氢气气相还原所得要小。无论何种还原条件,水的存在都有利于Pt前躯体中的氯从Pt/Al₂O₃表面去除;而氢气气相还原所得催化剂表面则有大量残余氯存在。     

甲烷部分氧化制合成气Pt-Ni/Al~2O~3催化剂的研究

研究了Ni/Al~2O~3,Pt/Al~2O~3和一系列Pt-Ni/Al~2O~3催化剂对甲烷部分氧化制合成气的催化作用,发现Pt-Ni/Al~2O~3催化剂显示了比Ni/Al~2O~3和Pt/Al~2O~3更高的活性和稳定性。H~2-TPR,CO-TPD,CO~2-TPD,SEM,XPS和XRD等结果证明:Pt和Ni之间存在较强的相互作用,Pt和部分Ni形成固溶体合金并且Pt在催化剂表面富集。Pt和Ni之间的相互作用提高了催化剂的活性和稳定性,甲烷在Pt-Ni/Al~2O~3上的催化部分氧化具有不同于在Pt/Al~2O~3和Ni/Al~2O~3上的反应性能。     

Supercritical carbon dioxide: an inert solvent for catalytic hydrogenation?

Various surface species originating from the reaction between CO2 and H2 over Al2O3-supported Pt, Pd, Rh, and Ru model catalysts were investigated by attenuated total reflection infrared (ATR-IR) spectroscopy under high-pressure conditions. Two different spectroscopic cells were used: a variable-volume view cell equipped with ATR-crystal and transmission IR windows (batch reactor) and a continuous-flow cell also equipped with a reflection element for ATR-IR spectroscopy. The study corroborated that CO formation from dense CO2 in the presence of hydrogen occurs over all Pt-group metals commonly used in heterogeneous catalytic hydrogenations in supercritical CO2 (scCO2). In the batch reactor cell, formation of CO was detected on all metals at 50 and 90 degrees C, with the highest rate on Pt. Additional surface species were observed on Pt/Al2O3 at 150 bar under static conditions. It seems that further reaction of CO with hydrogen is facilitated by the higher surface concentration at higher pressure. In the continuous-flow cell, CO coverage on Pt/Al2O3 was less prominent than that in the batch reactor cell. A transient experiment in the continuous-flow cell additionally revealed CO formation on Pt/Al2O3 at 120 bar after switching the feed from a H2-ethane to a H2-CO2 mixture. The in situ ATR-IR measurements indicate that CO formation in CO2-H2 mixtures is normally a minor side reaction during hydrogenation reactions on Pt-group metal catalysts, and dense ("supercritical") CO2 may be considered as a relatively "inert" solvent in many practical applications. However, blocking of specific sites on the metal surface by CO and consecutive products can affect structure sensitive hydrogenation reactions and may be at the origin of unexpected shifts in the product distribution.     

Adsorption and decomposition of cyclohexanone (C6H10O) on Pt(111) and the (2 × 2) and (√3 × √3)r30°-Sn/Pt(111) surface alloys

Adsorption and decomposition of cyclohexanone (C(6)H(10)O) on Pt(111) and on two ordered Pt-Sn surface alloys, (2 × 2)-Sn/Pt(111) and (√3 × √3)R30°-Sn/Pt(111), formed by vapor deposition of Sn on the Pt(111) single crystal surface were studied with TPD, HREELS, AES, LEED, and DFT calculations with vibrational analyses. Saturation coverage of C(6)H(10)O was found to be 0.25 ML, independent of the Sn surface concentration. The Pt(111) surface was reactive toward cyclohexanone, with the adsorption in the monolayer being about 70% irreversible. C(6)H(10)O decomposed to yield CO, H(2)O, H(2), and CH(4). Some C-O bond breaking occurred, yielding H(2)O and leaving some carbon on the surface after TPD. HREELS data showed that cyclohexanone decomposition in the monolayer began by 200 K. Intermediates from cyclohexanone decomposition were also relatively unstable on Pt(111), since coadsorbed CO and H were formed below 250 K. Surface Sn allowed for some cyclohexanone to adsorb reversibly. C(6)H(10)O dissociated on the (2 × 2) surface to form CO and H(2)O at low coverages, and methane and H(2) in smaller amounts than on Pt(111). Adsorption of cyclohexanone on (√3 × √3)R30°-Sn/Pt(111) at 90 K was mostly reversible. DFT calculations suggest that C(6)H(10)O adsorbs on Pt(111) in two configurations: by bonding weakly through oxygen to an atop Pt site and more strongly through simultaneously oxygen and carbon of the carbonyl to a bridged Pt-Pt site. In contrast, on alloy surfaces, C(6)H(10)O bonds preferentially to Sn. The presence of Sn, furthermore, is predicted to make the formation of the strongly bound C(6)H(10)O species bonding through O and C, which is a likely decomposition precursor, thermodynamically unfavorable. Alloying with Sn, thus, is shown to moderate adsorptive and reactive activity of Pt(111).     

Comparative Study of CuO Species on CuO/Al2O3, CuO/CeO-Al2O3 andCuO/La2O-Al2O3 Catalysts for CO Oxidation

CuO/Al2O3, CuO/CeO2-Al2O3, and CuO/La2O3-Al2O3 (denoted as Cu/Al, Cu/CeAl, and Cu/LaAl) catalysts were prepared by an impregnation method. CuO species and CuO/Al2O3 thermal solid-solid interaction were characterized by in situ XRD, Raman spectroscopy and H2-TPR techniques. For the Cu/Al catalyst, a CuAl2O4 phase exists between the CuO and Al2O3 layer and the CuO phase exists on the surface in both highly dispersed and bulk forms. For the Cu/CeAl catalyst, there is highly dispersed and bulk CuO on the surface, but most of the CuO has transferred into the internal layer of CeO2 as bulk CuO and CuAl2O4. For the Cu/LaAl catalyst, only bulk CuO is present on the surface of the catalyst and no CuAl2O4 is formed. The catalytic activity order for CO oxidation is Cu/CeAl>Cu/Al>Cu/LaAl. The highly dispersed CuO on the catalyst surface may be the active phase for CO oxidation. The results show that the addition of CeO2 not only promotes both the transference of CuO and the formation of CuAl2O4 but also favors the CO oxidation due to the association of highly dispersed CuO with CeO2, while La2O3 hinders the transference of CuO and the formation of CuAl2O4.     

结构助剂SiO2、Al2O3对铁基催化剂浆态床F-T合成性能的影响

采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了微球状Fe/Cu/K/SiO2和Fe/Cu/K/Al2O3催化剂，研究SiO2和Al2O3作为结构助剂对铁基催化剂吸附行为、炭化行为及F-T合成反应性能的影响。表征结果表明,与Al2O3相比较，SiO2抑制了H2的吸附，但促进了CO的吸附，有利于催化剂的炭化。催化剂在260℃、1.5MPa、H2/CO=0.67和2000h-1下的浆态床F-T合成反应评价表明，Fe/Cu/K/SiO2催化剂具有较高的F-T合成活性、高的水煤气变换反应（WGS）活性，且其烃产物选择性明显向高炭数方向偏移，而Fe/Cu/K/Al2O3催化剂则表现出较低的F-T合成活性、低的水煤气变换反应（WGS）活性和高的轻质烃选择性。但Fe/Cu/K/Al2O3催化剂比Fe/Cu/K/SiO2催化剂具有更好的运行稳定性。