Probing the porosity of cocrystallized MCM-49/ZSM-35 zeolites by hyperpolarized 129Xe NMR

One- and two-dimensional 129Xe NMR spectroscopy has been employed to study the porosity of cocrystallized MCM-49/ZSM-35 zeolites under the continuous flow of hyperpolarized xenon gas. It is found by variable-temperature experiments that Xe atoms can be adsorbed in different domains of MCM-49/ZSM-35 cocrystallized zeolites and the mechanically mixed counterparts. The exchange of Xe atoms in different types of pores is very fast at ambient temperatures. Even at very low temperature two-dimensional exchange spectra (EXSY) show that Xe atoms still undergo much faster exchange between MCM-49 and ZSM-35 analogues in the cocrystallized zeolites than in the mechanical mixture. This demonstrates that the MCM-49 and ZSM-35 analogues in cocrystallized zeolites may be stacked much closer than in the physical mixture, and some parts of intergrowth may be formed due to the partially similar basic structure of MCM-49 and ZSM-35.     

129Xe NMR study of the localization of PdCl2 supported on carbon nanotubes

Localization of PdCl₂ clusters supported on multi-wall carbon nanotubes (MWCNT) has been investigated using ¹²⁹Xe NMR of adsorbed xenon. As-made MWCNTs with channels initially inaccessible for adsorption and ball-milled MWCNTs with the totally accessible internal surface were used as supports. The observed ¹²⁹Xe NMR spectra were determined by the dynamics of xenon exchange between the aggregate pores and nanotube channels. No considerable changes of the ¹²⁹Xe NMR spectrum with the concentration of supported PdCl₂ were observed for the as-made MWCNT, while an additional resonance appeared for the ball-milled nanotubes. The ¹²⁹Xe NMR experiments evidenced the supported species to be localized on the internal surface of the ball-milled MWCNT.     

Probing the interaction of solvents with the stationary phase of C18 high-performance liquid chromatographic column material by variable-temperature dependent 129Xe nuclear magnetic resonance spectroscopy

VT (129)Xe NMR was applied to probe the interactions of solvents having different polarity indices with the stationary phase of a RP-C18 HPLC column material. It was observed that the highly polar ethylene glycol molecules do not mix with the alkyl chains of the RP-C18 stationary phase and the solvent is unable to enter the pores and the spaces between the particles. Three phases in this sample are defined as stationary/xenon phase, xenon gas phase (in the pores and the spaces between the particles) and ethylene glycol/xenon phase. In contrast to ethylene glycol, the nonpolar solvent cyclohexane was observed to be well mixed with the RP-C18 stationary phase. The capillary rise effect allows the solvent to enter the pores and the spaces between the particles. Two phases in this sample are defined as stationary/cyclohexane/xenon phase and cyclohexane/xenon phases. The properties of ethyl acetate are between those of ethylene glycol and cyclohexane. The (129)Xe NMR results show that the rational reversed phases should be conditioned from highly solvating to more polar solvents to remove the trapped air. The (129)Xe NMR results also show that pure stationary phase exists only when a highly polar solvent is used in reversed-phase chromatography. For a solvent with lower polarity, a stationary/solvent phase actually forms. This, together with the mobile phase, determines the selective factor for separating mixtures.     

Hyperpolarized 129Xe NMR investigation of multifunctional organic/inorganic hybrid mesoporous silica materials

An extensive study has been made on a series of multifunctional mesoporous silica materials, prepared by introducing two different organoalkoxysilanes, namely 3-[2-(2-aminoethylamino)ethylamino]propyltrimethoxysilane (AEPTMS) and 3-cyanopropyltriethoxysilane (CPTES) during the base-catalyzed condensation of tetraethoxysilane (TEOS), using the variable-temperature (VT) hyperpolarized (HP) 129Xe NMR technique. VT HP-129Xe NMR chemical shift measurements of adsorbed xenon revealed that surface properties as well as functionality of these AEP/CP-functionalized microparticles (MP) could be controlled by varying the AEPTMS/CPTES ratio in the starting solution during synthesis. Additional chemical shift contribution due to Xe-moiety interactions was observed for monofunctional AEP-MP and CP-MP as well as for bifunctional AEP/CP-MP samples. In particular, unlike CP-MP that has a shorter organic backbone on the silica surface, the amino groups in the AEP chain tends to interact with the silanol groups on the silica surface causing backbone bending and hence formation of secondary pores in AEP-MP, as indicated by additional shoulder peak at lower field in the room-temperature 129Xe NMR spectrum. The exchange processes of xenon in different adsorption regions were also verified by 2D EXSY HP-129Xe NMR spectroscopy. It is also found that subsequent removal of functional moieties by calcination treatment tends to result in a more severe surface roughness on the pore walls in bifunctional samples compared to monofunctional ones. The effect of hydrophobicity/hydrophilicity of the organoalkoxysilanes on the formation, pore structure and surface property of these functionalized mesoporous silica materials are also discussed.     

2D 129Xe EXSY of xenon atoms in a thermotropic liquid crystal confined to a controlled-pore glass

Two-dimensional (129)Xe exchange spectroscopy (EXSY) NMR measurements are presented for xenon atoms dissolved in a thermotropic nematic Liquid Crystal (LC), Merck Phase 4, confined to a mesoporous Controlled-Pore Glass (CPG) material with an average pore diameter of 81 A. Experiments were carried out as a function of mixing time at two different temperatures in which Phase 4 appears in nematic and isotropic phases. The exchange rate constants of xenon atoms between two different sites were determined utilizing the intensities of diagonal and off-diagonal signals measured in the EXSY spectra. In the studied system, the sites are: (a) xenon dissolved in the bulk LC between the CPG particles; and (b) xenon in the LC confined inside the pores. The diffusion rate of xenon atoms between the various sites was observed to be very slow.     

Characterization of CuY zeolites after dehydration,oxidation and reduction with carbon monoxide An adsorption and 129Xe nuclear magnetic resonance spectroscopy study

The adsorption isotherms and ¹²⁹Xe nuclear magnetic resonance (NMR) chemical shifts of xenon and the adsorption isotherms of carbon monoxide of Cu(II)- and Cu(I)-exchanged zeolites NaY were measured. The former zeolites of 53, 75, and 95% exchange degrees were investigated after various pretreatment steps comprising dehydration, oxidation and reduction with CO at 420°C as well as long-term CO reduction at 470°C. The Cu(I)Y zeolite of 70% exchange degree was prepared via a solid-state exchange procedure with CuCl and subjected to dehydration at 420°C. In all cases, except the dehydrated zeolites, almost linear xenon adsorption isotherms and linear ¹²⁹Xe NMR chemical shift _versus xenon concentration curves running parallel to each other are obtained. In contrast, the chemical shift curves for the dehydrated zeolites are non-linear at low xenon concentrations turning towards negative chemical shift values at very low pressures. The whole body of the experimental xenon data can be explained quantitatively with a unifying approach on the basis of a site adsorption model where the sites are (i) two types of cuprous ions of much different adsorption strength and ¹²⁹Xe chemical shift, (ii) Na⁺ cations, (iii) Lewis acid sites generated through autoreduction and reduction of Cu²⁺ by CO, and (iv) framework sites free of cations. These five types of sites are each characterized by Langmuir adsorption isotherm constants and local ¹²⁹Xe NMR chemical shifts. The adsorption site concentrations in the various zeolites are evaluated. The supercage Cu(I) concentration values are in nice agreement with the results deduced from the CO adsorption isotherm measurements.     

A double quantum (129)Xe NMR experiment for probing xenon in multiply-occupied cavities of solid-state inclusion compounds

A method is presented for detecting multiple xenon atoms in cavities of solid-state inclusion compounds using (129)Xe double quantum NMR spectroscopy. Double quantum filtered (129)Xe NMR spectra, performed on the xenon clathrate of Dianin's compound were obtained under high-resolution Magic-Angle Spinning (MAS) conditions, by recoupling the weak (129)Xe-(129)Xe dipole-dipole couplings that exist between xenon atoms in close spatial proximity. Because the (129)Xe-(129)Xe dipole-dipole couplings are generally weak due to dynamics of the atoms and to large internuclear separations, and since the (129)Xe Chemical Shift Anisotropy (CSA) tends to be relatively large, a very robust dipolar recoupling sequence was necessary, with the symmetry-based SR26 dipolar recoupling sequence proving appropriate. We have also attempted to measure the (129)Xe-(129)Xe dipole-dipole coupling constant between xenon atoms in the cavities of the xenon-Dianin's compound clathrate and have found that the dynamics of the xenon atoms (as investigated with molecular dynamics simulations) as well as (129)Xe multiple spin effects complicate the analysis. The double quantum NMR method is useful for peak assignment in (129)Xe NMR spectra because peaks arising from different types of absorption/inclusion sites or from different levels of occupancy of single sites can be distinguished. The method can also help resolve ambiguities in diffraction experiments concerning the order/disorder in a material.     

Hydrogen atoms in solid xenon: trapping site structure, distribution, and stability as revealed by EPR studies in monoisotopic and isotopically enriched xenon matrices

Trapping and decay of hydrogen atoms generated by fast electron irradiation of solid xenon doped with small hydrogen-containing molecules (acetylene, water) were studied by EPR using monoisotopic (136)Xe matrix (I = 0) and highly isotopically enriched (129)Xe matrix (I = 12). It was found that more than 99% of H atoms observed by EPR are initially trapped in the octahedral interstitial trapping sites, whereas initial population of the substitutional trapping sites is very small (less than 1%). The (129)Xe hyperfine coupling tensor parameters for major trapping site were determined from direct measurements in a (136)Xe matrix doped with small amount of (129)Xe: A(0) ((129)Xe) = -92.1 MHz and B((129)Xe) = -22 MHz. Final proof for the trapping site structure was obtained from comparison between experiment and simulation for the highly enriched (129)Xe matrix. The mean interspin distance of approximately 4 nm was estimated from the EPR signal linewidth in a (136)Xe matrix, the hydrogen atom loss upon irradiation being negligible at low doses. Decay of trapped H atoms occurring at 38-45 K leads to population (or creation) of metastable traps of lower symmetry.     

Water soluble cryptophanes showing unprecedented affinity for xenon: candidates as NMR-based biosensors

Cryptophanes bearing OCH(2)COOH groups in place of the methoxy groups represent a new class of xenon-carrier molecules soluble in water at biological pH. By using (1)H and (129)Xe NMR (thermally- and laser-polarized dissolved gas), the structural and dynamical behaviors of these host molecules as well as their interaction with xenon are studied. They are shown to exist in aqueous solution under different conformations in very slow exchange. A saddle form present for one of these conformations could explain the (1)H NMR spectra. Whereas the cryptophanes in such a conformation are unable to complex xenon, unprecedented high binding constants are found for cryptophanes in the other canonical crown-crown conformation. These host molecules could therefore be valuable candidates for biosensing using (129)Xe MRI.     

Exploring surfaces and cavities in lipoxygenase and other proteins by hyperpolarized xenon-129 NMR

This paper presents an exploratory study of the binding interactions of xenon with the surface of several different proteins in the solution and solid states using both conventional and hyperpolarized (129)Xe NMR. The generation of hyperpolarized (129)Xe by spin exchange optical pumping affords an enhancement by 3-4 orders of magnitude of its NMR signal. As a result, it is possible to observe Xe directly bound to the surface of micromolar quantities of lyophilized protein. The highly sensitive nature of the (129)Xe line shape and chemical shift are used as indicators for the conditions most likely to yield maximal dipolar contact between (129)Xe nuclei and nuclear spins situated on the protein. This is an intermediate step toward achieving the ultimate goal of NMR enhancement of the binding-site nuclei by polarization transfer from hyperpolarized (129)Xe. The hyperpolarized (129)Xe spectra resulting from exposure of four different proteins in the lyophilized, powdered form have been examined for evidence of binding. Each of the proteins, namely, metmyoglobin, methemoglobin, hen egg white lysozyme, and soybean lipoxygenase, yielded a distinctly different NMR line shape. With the exception of lysozyme, the proteins all possess a paramagnetic iron center which can be expected to rapidly relax the (129)Xe and produce a net shift in its resonance position if the noble gas atom occupies specific binding sites near the iron. At temperatures from 223 to 183 K, NMR signals were observed in the 0-40 ppm chemical shift range, relative to Xe in the gas phase. The signals broadened and shifted downfield as the temperature was reduced, indicating that Xe is exchanging between the gas phase and internal or external binding sites of the proteins. Additionally, conventional (129)Xe NMR studies of metmyoglobin and lipoxygenase in the solution state are presented. The temperature dependence of the chemical shift and line shape indicate exchange of Xe between adsorption sites on lipoxygenase and Xe in the solvent on the slow to intermediate exchange time scale. The NMR results are compared with N(2), Xe, and CH(4) gas adsorption isotherms. It is found that lipoxygenase is unique among the proteins studied in possessing a relatively high affinity for gas molecules, and in addition, demonstrating the most clearly resolved adsorbed (129)Xe NMR peak in the lyophilized state.     

129Xe NMR spectroscopy study of porous cyanometallates

Zinc and cadmium hexacyanocobaltates(III) were prepared, and their porous networks were explored using 129Xe spectroscopy. The crystal structures of these two compounds are representative of porous hexacyanometallates, cubic (Fm-3m) for cadmium and rhombohedral (R-3c) for zinc. In the cubic structure, the porosity is related to systematic vacancies created from the elemental building block (i.e., the hexacyanometallate anion), whereas the rhombohedral (R-3c) structure is free of vacant sites but has tetrahedral coordination for the zinc atom, which leads to relatively large ellipsoidal pores communicated by elliptical windows. According to the Xe adsorption isotherms, these porous frameworks were found to be accessible to the Xe atom. The structure of the higher electric field gradient at the pore surface (Fm-3m) appears and is accompanied by a stronger guest-host interaction for the Xe atoms and a higher capacity for Xe sorption. For cadmium, the 129Xe NMR signal is typical of isotropic movement for the Xe atom, indicating that it remains trapped within a spherical cavity. From spectra recorded for different amounts of adsorbed Xe, the cavity diameter was estimated. For the zinc complex, 129Xe NMR spectra are asymmetric because of the Xe atom movement within an elongated cavity. The line-shape asymmetry changes when the Xe loading within the porous framework increases, which was ascribed to Xe-Xe interactions through the cavity windows. The Xe adsorption revealed additional structural information for the studied materials.     

129Xe NMR study of ZSM-5 type zeolites Effect of cationic sites

A comprehensive ¹²⁹Xe NMR spectroscopy study on H-ZSM-5 zeolites having different aluminum contents and on cation-exchanged ZSM-5 zeolites is reported. The parent H-ZSM-5 zeolites were ion-exchanged with Group I–III metal ions ( K, Ca, Sr, Ba, Al, La) to varying degrees. The chemical shift of adsorbed ¹²⁹Xe is seen to be a function of the pentasil structure of ZSM-5, of the number of free Brønsted acid sites and of the number of metal cations in the framework. Differences in the chemical shift of ¹²⁹Xe are seen between cations due to their different polarizing forces against xenon. The amount of cations has also an effect on the δ_xe-xe term in Fraissard's equation that may be caused by changes in the diffusional characteristics of Xe atoms in the ZSM-5 framework.     

Ordering and Clathrate Hydrate Formation in Co‐deposits of Xenon and Water at Low Temperatures

Local ordering in co‐deposits of water and xenon atoms produced at low temperatures can be followed uniquely by ¹²⁹Xe NMR spectroscopy. In water‐rich samples deposited at 10 K and observed at 77 K, xenon NMR results show that there is a wide distribution of arrangements of water molecules around xenon atoms. This starts to order into the definite coordination for the structure I, large and small cages, when samples are annealed at ～140 K, although the process is not complete until a temperature of 180 K is reached, as shown by powder Xray diffraction. There is evidence that Xe ? 20 H₂O clusters are prominent in the early stages of crystallization. In xenon‐rich deposits at 77 K there is evidence of xenon atoms trapped in Xe ? 20 H₂O clusters, which are similar to the small hydration shells or cages observed in hydrate structures, but not in the larger water clusters consisting of 24 or 28 water molecules. These observations are in agreement with results obtained on the formation of Xe hydrate on the surface of ice surfaces by using hyperpolarized Xe NMR spectroscopy. The results indicate that for the various different modes of hydrate formation, both from Xe reacting with amorphous water and with crystalline ice surfaces, versions of the small cage are important structures in the early stages of crystallization.     

Novel characterization of the adsorption sites in large pore metal-organic frameworks: combination of X-ray powder diffraction and thermal desorption spectroscopy

The preferred adsorption sites of xenon in the recently synthesized metal-organic framework MFU-4l(arge) possessing a bimodal pore structure (with pore sizes of 12 ? and 18.6 ?) were studied via the combination of low temperature thermal desorption spectroscopy and in situ X-ray powder diffraction. The diffraction patterns were collected at 110 K and 150 K according to the temperature of the desorption maxima. The maximum entropy method was used to reconstruct the electron density distribution of the structure and to localize the adsorbed xenon using refined data of the Xe-filled and empty sample. First principles calculations revealed that Xe atoms exclusively occupy the Wyckoff 32f position at approximately 2/3 2/3 2/3 along the body diagonal of the cubic crystal structure. At 110 K, Xe atoms occupy all 32 f positions (8 atoms per pore) while at 150 K the occupancy descends to 25% (2 atoms per pore). No Xe occupation of the small pores is observed by neither experimental measurements nor theoretical studies.     

Effects of varying water adsorption on a Cu3(BTC)2 metal-organic framework (MOF) as studied by 1H and 13C solid-state NMR spectroscopy

The process of water adsorption on a dehydrated Cu(3)(BTC)(2) (copper (II) benzene 1,3,5-tricarboxylate) metal-organic framework (MOF) was studied with (1)H and (13)C solid-state NMR. Different relative amounts of water (0.5, 0.75, 1, 1.5, 2, and 5 mole equivalents with respect to copper) were adsorbed via the gas phase. (1)H and (13)C MAS NMR spectra of dehydrated and water-loaded Cu(3)(BTC)(2) samples gave evidence on the structural changes due to water adsorption within the MOF material as well as information on water dynamics. The analysis of (1)H spinning sideband intensities reveals differences in the (1)H-(63/65)Cu hyperfine coupling between dehydrated and water-loaded samples. The investigation was continued for 60 days to follow the stability of the Cu(3)(BTC)(2) network under humid conditions. NMR data reveal that Cu(3)(BTC)(2) decomposes quite fast with the decomposition being different for different water contents.     

Solid-state 129Xe and 131Xe NMR study of the perxenate anion XeO(6)4-

Results of the first solid-state 131Xe NMR study of xenon-containing compounds are presented. The two NMR-active isotopes of xenon, 129Xe (I=1/2) and 131Xe (I=3/2), are exploited to characterize the xenon magnetic shielding and quadrupolar interactions for two sodium perxenate salts, Na4XeO6.xH2O (x=0, 2), at an applied magnetic field strength of 11.75 T. Solid-state 129/131Xe NMR line shapes indicate that the local xenon environment in anhydrous Na4XeO6 adopts octahedral symmetry, but upon hydration, the XeO6(4-) anion becomes noticeably distorted from octahedral symmetry. For stationary, anhydrous samples of Na4XeO6, the heteronuclear 129/131Xe-23Na dipolar interaction is the principal contributor to the breadth of the 129/131Xe NMR lines. For stationary and slow magic-angle-spinning samples of Na4XeO(6).2H2O, the anisotropic xenon shielding interaction dominates the 129Xe NMR line shape, whereas the 131Xe NMR line shape is completely dominated by the nuclear quadrupolar interaction. The xenon shielding tensor is approximately axially symmetric, with a skew of -0.7+/-0.3, an isotropic xenon chemical shift of -725.6+/-1.0 ppm, and a span of 95+/-5 ppm. The 131Xe quadrupolar coupling constant, 10.8+/-0.5 MHz, is large for a nucleus at a site of approximate Oh symmetry, and the quadrupolar asymmetry parameter indicates a lack of axial symmetry. This study demonstrates the extreme sensitivity of the 131Xe nuclear quadrupolar interaction to changes in the local xenon environment.     

Surface chemical modification of zeolites and their catalytic performance for naphthalene alkylation

Acid-catalyzed naphthalene alkylation products, such as 2,6-dialkylnaphthalenes (2,6-DAN), are industrially important compounds used to make monomers for advanced polymer materials [1]. Zeolite molecular sieves can be extensively used in many catalytic applications, specifically in naphthalene alkylations due to their high activity and stability as well as their high selectivity. The initial studies have mainly focused on gas phase alkylation of naphthalene with methanol, and only obtained th…     

MCM-41分子筛的合成及129Xe核磁共振的研究

ＭＣＭ４１中孔分子筛是１９９２年由Ｍｏｂｉｌ公司的科学家Ｋｒｅｓｇｅ［１］等人首次合成的,并在《自然》杂志发表。这种中孔分子筛具有六角形孔径,孔径２ｎｍ～１０ｎｍ,这种分子筛的孔径可以通过水晶模板来控制［２］。已报道的合成ＭＣＭ４１,孔径一般在２．０ｎｍ～３．５ｎｍ,使用的水晶模板一般是单一或两种阳离子季铵盐表面活性剂［３,４］。本论文通过引入第二种扩孔模板,与阳离子季铵盐协同作用,合成了孔径５．２ｎｍ（ＢＥＴ法测）的ＭＣＭ４１。通过氮气的吸脱附,测定了分子筛的比表面和孔径等性质。Ｊ．Ｆｒａｉｓｓａｒｄ…     

Probing polymer colloids by Xe NMR

Model aqueous dispersions of polystyrene, poly(methyl methacrylate), poly(n-butyl acrylate) and a statistical copolymer poly(n-butyl acrylate-co-methyl methacrylate) were studied using xenon NMR spectroscopy. The ¹²⁹Xe NMR spectra of these various latexes reveal qualitative and quantitative differences in the number of peaks and in their line widths and chemical shifts. Above the glass transition temperature, exchange between xenon sorbed in the particle core and free xenon outside the particles is fast on the ¹²⁹Xe spectral time-scale and a single ¹²⁹Xe signal is observed. At temperatures below the glass transition temperature, the exchange between sorbed and free xenon is slow on the ¹²⁹Xe spectral time-scale and two ¹²⁹Xe NMR signals can be observed. If the signal of sorbed ¹²⁹Xe is observed, its chemical shift, line width and integral relative to the integral of free ¹²⁹Xe can be used for the characterization of the particle core. The line width of free ¹²⁹Xe provides the residence time of xenon outside the particles and can be used to determine the rate constant characterizing the kinetics of penetration of xenon in the particles. This rate constant emerges as promising parameter for the characterization of the polymer particle surface.     

Grand canonical Monte Carlo simulations of the 129Xe NMR line shapes of xenon adsorbed in (+/-)-[Co(en)3]Cl3

The 129Xe NMR line shapes of xenon adsorbed in the nanochannels of the (+/-)-[Co(en)3]Cl3 ionic crystal have been calculated by grand canonical Monte Carlo (GCMC) simulations. The results of our GCMC simulations illustrate their utility in predicting 129Xe NMR chemical shifts in systems containing a transition metal. In particular, the nanochannels of (+/-)-[Co(en)3]Cl3 provide a simple, yet interesting, model system that serves as a building block toward understanding xenon chemical shifts in more complex porous materials containing transition metals. Using only the Xe-C and Xe-H potentials and shielding response functions derived from the Xe@CH4 van der Waals complex to model the interior of the channel, the GCMC simulations correctly predict the 129Xe NMR line shapes observed experimentally (Ueda, T.; Eguchi, T.; Nakamura, N.; Wasylishen, R. E. J. Phys. Chem. B 2003, 107, 180-185). At low xenon loading, the simulated 129Xe NMR line shape is axially symmetric with chemical-shift tensor components delta(parallel) = 379 ppm and delta(perpendicular) = 274 ppm. Although the simulated isotropic chemical shift, delta(iso) = 309 ppm, is overestimated, the anisotropy of the chemical-shift tensor is correctly predicted. The simulations provide an explanation for the observed trend in the 129Xe NMR line shapes as a function of the overhead xenon pressure: delta(perpendicular) increased from 274 to 292 ppm, while delta(parallel) changed by only 3 ppm over the entire xenon loading range. The overestimation of the isotropic chemical shifts is explained based upon the results of quantum mechanical 129Xe shielding calculations of xenon interacting with an isolated (+/-)-[Co(en)3]Cl3 molecule. The xenon chemical shift is shown to be reduced by about 12% going from the Xe@[Co(en)3]Cl3 van der Waals complex to the Xe@C2H6 fragment.