Polyhydroxy complexes of rhenium(VII)

Perrhenate in concentrated alkali forms yellow complexes with a number of polyhydric compounds. With d-gluconolactone it was found that this color was due to a considerable broadening of the perrhenate band in the UV. The optical rotation of alkaline d-gluconate changes markedly on adding perrhenate, and increases almost linearly with increasing NaOH concentration from 2–16.8 M. A continuous variations analysis of this complex in 12M NaOH showed that it was a 1:1 compound of gluconate and perrhenate. Its formation constant was approximately 43 LM⁻¹. Ligands which produced a yellow color with perrhenate in 12 M NaOH, and whose optical rotation changed significantly included d-mannitol, d-glucitol (sorbitol), perseitol, arabinitol and sodium d-xylonate. Ligands which did not react with perrhenate were: ethylene glycol, glycerol, ribitol, ribonolactone and d-allonolactone. It was concluded that vicinal OH-bearing carbon atoms with opposing configurations (D-L) are required to form these complexes, and that the distance between the centers of adjacent oxygen atoms in the ligand is critical in determining whether the perrhenate will form a complex. It was further concluded that ligands of this type stabilize some sort of meso-perrhenate anion. Pertechnetate does not form these complexes under the same conditions.     

Synthesis and characterization of binuclear transition metal–rhenium(VII) complexes with bridging cyanide ligands

Reacting transition metal complexes in low oxidation states, containing one or two cyanide ligands, with methyltrioxorhenium(VII) leads to bridged mixed metal compounds in good yields. The Re(VII) core is then surrounded by five or six ligands, respectively. The strength of these CN bridges and thus the stability of the newly generated bimetallic compound strongly depends on the donor strength of the ligands surrounding of the Cr/Mo/W or Fe moiety. The stability of the mixed metal molecules is reflected in the temperature dependent behavior of their ¹⁷O-NMR spectra, in their IR (Re=O) stretching frequencies and force constants, as well as several other spectroscopic data. UV–vis absorption spectra show the appearance of charge transfer bands. In the case of the mixed Mo/Re complexes the ⁹⁵Mo-NMR spectroscopy is also a helpful tool to examine the donor capability of the Mo moiety. The described compounds also show photosensitivity.     

Synthesis of cationic rhenium(VII) oxo imido complexes and their tunability towards oxygen atom transfer

A facile method is described for the synthesis of cationic Re(VII) cis oxo imido complexes of the form [Re(O)(NAr)(salpd)+] (salpd = N,N'-propane-1,3-diylbis(salicylideneimine)), 4, [Re(O)(NAr)(saldach)+] (saldach = N,N'-cyclohexane-1,3-diylbis(salicylideneimine)), 5, and [Re(O)(NAr)(hoz)2+] (hoz = 2-(2'-hydroxyphenyl)-2-oxazoline) (Ar = 2,4,6,-(Me)C(6)H(2); 4-(OMe)C(6)H(4); 4-(Me)C(6)H(4); 4-(CF3)C6H4; 4-MeC(6)H(4)SO(2)), 6, from the reaction of oxorhenium(V) [(L)Re(O)(Solv)+] (1-3) and aryl azides under ambient conditions. Unlike previously reported cationic Re(VII) dioxo complexes, these cationic oxo imido complexes can be obtained on a preparative scale, and an X-ray crystal structure of [Re(O)(NMes)(saldach)+], 5a, has been obtained. Despite the multiple stereoisomers that could arise from tetradentate ligation of salen ligands to rhenium, one major isomer is observed and isolated in each instant. The electronic rationalization for stereoselectivity is discussed. Investigation of the mechanism suggests that the reactions of Re(V) with aryl azides proceed through an azido adduct similar to the group 5 complexes of Bergman and Cummins. Treatment of the cationic oxo imido complexes with a reductant (PAr(3), PhSMe, or PhSH) results in oxygen atom transfer (OAT) and the formation of cationic Re(V) imido complexes. [(salpd)Re(NMes)(PPh(3))(+)] (7) and [(hoz)2Re(NAr)(PPh(3))(+)] (Ar = m-OMe phenyl) (9) have been isolated on a preparative scale and fully characterized including an X-ray single-crystal structure of 7. The kinetics of OAT, monitored by stopped-flow spectroscopy, has revealed rate saturation for substrate dependences. The different plateau values for different oxygen acceptors (Y) provide direct support for a previously suggested mechanism in which the reductant forms a prior-equilibrium adduct with the rhenium oxo (ReVII = O<--Y). The second-order rate constants of OAT, which span more than 3 orders of magnitude for a given substrate, are significantly affected by the electronics of the imido ancillary ligand with electron-withdrawing imidos being most effective. However, the rate constant for the most active oxo imido rhenium(VII) is 2 orders of magnitude slower than that observed for the known cationic dioxo Re(VII) [(hoz)2Re(O)(2)(+)].     

Synthesis and molecular structure of chlorotris(trimethylsilylmethyl)trimethylsilyl-methylidyne rhenium(VII)

The complex Re(CSiMe₃)(CH₂SiMe₃)₃Cl has been isolated as yellow crystals in low yield from the reaction of ReCl₄(THF)₂ with Me₃SiCH₂MgCl and characterised by X-ray crystallography. The molecule has a trigonal bipyramidal geometry with the alkylidyne and chlorine ligands axial.     

Synthesis and characterization of novel rhenium(I) complexes towards potential biological imaging applications

Background

Re(I) tricarbonyl complexes exhibit immense potential as fluorescence imaging agents. However, only a handful of rhenium complexes have been utilized in biological imaging. The present study describes the synthesis of four novel rhenium complexes, their characterization and preliminary biological studies to assess their potential as biological imaging agents.

Results

Four facial rhenium tricarbonyl complexes containing a pyridyl triazine core, (L1 = 5,5′(3-(2-pyridyl)-1,2,4-triazine-5,6-diyl)-bis-2-furansulfonic acid disodium salt and L2 = (3-(2- pyridyl)-5,6-diphenyl-1,2,4-triazine-4′,4′′-disulfonic acid sodium salt) have been synthesized by utililzing two different Re metal precursors, Re(CO)₅Br and [Re(CO)₃(H₂O)₃]OTf in an organic solvent mixture and water, respectively. The rhenium complexes [Re(CO)₃(H₂O)L1]⁺ (1), Re(CO)₃L1Br (2), [Re(CO)₃(H₂O)L2]⁺ (3), and Re(CO)₃L2Br (4), were obtained in 70–85% yield and characterized by ¹H NMR, IR, UV, and luminescence spectroscopy. In both H₂O and acetonitrile, complexes display a weak absorption band in the visible region which can be assigned to a metal to ligand charge transfer excitation and fluorescent emission lying in the 650–710 nm range. Cytotoxicity assays of complexes 1, 3, and 4 were carried out for rat peritoneal cells. Both plant cells (Allium cepa bulb cells) and rat peritoneal cells were stained using the maximum non-toxic concentration levels of the compounds, 20.00 mg ml^?1 for 1 and 3 and 5.00 mg ml^?1 for 4 to observe under the epifluorescence microscope. In both cell lines, compound concentrated specifically in the nuclei region. Hence, nuclei showed red fluorescence upon excitation at 550 nm.

Conclusions

Four novel rhenium complexes have been synthesized and characterized. Remarkable enhancement of fluorescence upon binding with cells and visible range excitability demonstrates the possibility of using the new complexes in biological applications.

Open image in new window

Graphical abstract Micrograph of rat peritoneal cells incubated with novel rhenium complex under epifluorescence microscope.

     

Synthesis, characterization and photophysics of alkyne bridged bimetallic rhenium(I) and ruthenium(II) complexes

Six new homobimetallic and heterobimetallic complexes of rhenium(I) and ruthenium(II) bridged by ethynylene spacer [(CO)₃(bpy)Re(BL)Re(bpy)(CO)₃]²⁺ [Cl(bpy)₂Ru(BL)Ru(bpy)₂Cl]²⁺ and [(CO)₃(bpy)Re(BL)Ru(bpy)₂Cl]²⁺ (bpy = 2,2′-bipyridine, BL = 1,2-bis(4-pyridyl)acetylene (bpa) and 1,4-bis(4-pyridyl)butadiyne (bpb) are synthesized and characterized. The electrochemical and photophysical properties of all the complexes show a weak interaction between two metal centers in heterobimetallic complexes. The excited state lifetime of the complexes is increased upon introduction of ethynylene spacer and the transient spectra show that this is due to delocalization of electron in the bridging ligand. Also, intramolecular energy transfer from *Re(I) to Ru(II) in Re–Ru heterobimetallic complexes occurs with a rate constant 4 × 10⁷ s⁻¹.     

Synthesis,characterization and reactivity of some rhenium phosphite complexes

The preparation and characterization of some Re(III), Re(IV) and Re(V) chloro phosphite complexes are reported. Both Re(III) and Re(IV) complexes react with sodium borohydride, yielding the corresponding polyhydrides, ReH₅[P(OEt)₃]₃ and ReH₇[P(OEt)₃]₂. The thermal and photochemical reactivity of these complexes is described.     

Synthesis of N-heterocyclic carbene rhenium(I) carbonyl complexes

Reaction of aminophosphinimine [RHN(CH(2))(2)N[double bond, length as m-dash]PPh(3)] (R = H, Et) with Re(2)(CO)(10) provided the NH-functionalized carbene rhenium complex [Re(2)(CNHCH(2)CH(2)NR)(CO)(9)] (3a, R = H, 3b, R = Et). Treatment of 3 with Br(2) provided the mono nuclear [Re(CNHCH(2)CH(2)NR)(CO)(4)Br] (1, R = H, 2, R = Et). However, NH-functionalized carbene complexes 1-3 did not undergo N-alkylation with alkyl halides to yield the N-substituted NHC complexes. The direct ligand substitution of [Re(CO)(5)Br] with a carbene donor was employed to prepare [Re(IMes(2))(CO)(4)Br] (6a, IMes(2) = 1,3-di-mesitylimidazol-2-ylidene; 6b, IMes(2) = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene). Analyses of spectroscopic and crystal data of 6a and 6b show similar corresponding data among these complexes, suggesting the saturated and unsaturated NHCs have similar bonding with Re(I) metal centers. Reduction of 6a and 6b with LiEt(3)BH yielded the corresponding hydrido complexes 7a-b [ReH(CO)(4)(IMes(2))], but not 1 and 2. Ligand substitution of 1, 6a and 6b toward 2,2'-bipyridine (bipy) was investigated. Crystal structures of 1, 3a-b, 6a-b and 7b were determined for characterization and comparison.     

Synthesis, structural characterization, and electrophosphorescent properties of rhenium(I) complexes containing carrier-transporting groups

Two novel diimine rhenium(I) carbonyl complexes with the formula [Re(CO)(3)(L)Br], where L = 1-(4-5'-phenyl-1,3,4-oxadiazolylbenzyl)-2-pyridinylbenzoimidazole (1) and 1-(4-carbazolylbutyl)-2-pyridinylbenzoimidazole (2), have been successfully synthesized and characterized by elemental analysis, (1)H NMR, and IR spectra. Their electrochemical, photophysical, and electroluminescent behaviors, along with the X-ray crystal structure analysis of 2, are also described. White electrophosphorescent devices were fabricated using 1 and 2 as emitters. The devices based on carbazole-containing (hole-transporting group) 2 with the structure ITO/m-MTDATA (30 nm)/NPB (20 nm)/2:CBP (8%, 30 nm)/Bphen (20 nm)/Alq(3) (20 nm)/LiF (0.8 nm)/Al (200 nm) exhibit Commission Internationale de L'Eclairage coordinates of x = 0.34, y = 0.33 with a maximum brightness of 2300 cd/m(2) at 580 mA/cm(2). When a brightness of 1500 cd/m(2) appears at 230 mA/cm(2), the devices based on 10 wt % 2 still possess 56% of the maximum efficiency which appeared at 2.7 mA/cm(2). These performances are among the best reported for devices using Re(I) complexes as emitters. By comparison of the electroluminescent properties of the devices based on 1 and 2, we conclude that the introduction of the carbazole group into the ligand improves the performance of 1-doped devices.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Synthesis,characterization, electrochemical and photophysical properties of bimetallic complexes of rhenium(I) and osmium(II)

Monometallic and bimetallic diimine complexes of rhenium(I) and osmium(II), [(CO)₃(bpy)Re(4,4′-bpy)](PF₆) I, [(CO)₃(bpy)Re(4,4′-bpy)Re(bpy)(CO)₃](PF₆)₂II, [Cl(bpy)₂Os(4,4′-bpy)](PF₆) III and [Cl(bpy)₂Os(4,4′-bpy)Os(bpy)₂Cl](PF₆)₂IV, and a new heterobimetallic complex of rhenium(I) and osmium(II) [(CO)₃(bpy)Re(4,4′-bpy)Os(bpy)Cl](PF₆)₂V (bpy = 2,2′-bipyridine; 4,4′-bpy = 4,4′-bipyridine) have been synthesized and characterized by various spectral techniques. The photophysical properties of all the complexes have been studied and a comparison is made between the heterobimetallic and corresponding monometallic and homobimetallic complexes. Emission and transient absorption spectral studies reveal that excited state energy transfer from the rhenium(I) chromophore (∗Re) to osmium(II) takes place. The energy transfer rate constant is found to be 8.7 × 10⁷ s⁻¹.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-ethoxy-3-methoxy-benzaldehyde and their rhenium(I) complexes

The ligands (HL¹, HL² and HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods, and the structures of the ligands have been elucidated by X-ray diffraction. In the case of HL¹, we have tried the reaction with [ReX(CO)₅] (X = Br, Cl) in toluene and we proved the formation of the adduct also by this way by the isolation of single crystals of 1a′ · ½C₇H_8.     

Synthesis, electrochemistry and structural characterization of luminescent rhenium(I) monoynyl complexes and their homo- and hetero-metallic binuclear complexes

A series of luminescent rhenium(I) monoynyl complexes, [Re(N---N)(CO)₃(CC---R)] (N---N=bpy, ^tBu₂bpy; R=C₆H₅, C₆H₄---Cl-4, C₆H₄---OCH₃-4, C₆H₄---C₈H₁₇-4, C₆H₄---C₆H₅, C₈H₁₇, C₄H₃S, C₄H₂S---C₄H₃S, C₅H₄N), together with their homo- and hetero-metallic binuclear complexes, {Re(N---N)(CO)₃(CC---C₅H₄N)[M]} (N---N=bpy, ^tBu₂bpy; [M]=[Re{(CF₃)₂-bpy}(CO)₃]ClO₄, [Re(NO₂-phen)(CO)₃]ClO₄, W(CO)₅) have been synthesized and their electrochemical and photoluminescence behaviors determined. The structural characterization and electronic structures of selected complexes have also been studied. The luminescence origin of the rhenium(I) alkynyl complexes has been assigned as derived states of a [dπ(Re)→π*(N---N)] metal-to-ligand charge transfer (MLCT) origin mixed with a [π(CCR)→π*(N---N)] ligand-to-ligand charge transfer (LLCT) character. The assignments are further supported by extended Hückel molecular orbital (EHMO) calculations, which show that the LUMO mainly consists of π*(N---N) character while the HOMO is dominated by the antibonding character of the Re---CCR moiety resulted from the overlap of the dπ(Re) and π(CCR) orbitals.     

Synthesis and structure of rhenium(IV) chloride complexes with acetonitrile

Cis and trans isomers of the tetrachlorodiacetonitrile rhenium(IV) complex were synthesized and isolated. The structure of cis-ReCl₄(N≡C-CH₃)₂ was studied by X-ray crystallography. It was shown that the coordination polyhedron of the central Re(IV) atom is formed by the four chlorine atoms and the nitrogen atoms of two coordinated acetonitrile molecules. The vibrational (IR and Raman) spectra of the cis isomer of the complex in solid state were interpreted by factor-group analysis. A comparison of the IR spectra of two isomers confirmed that they are cis and trans isomers.     

Synthesis, functionalization, characterization, and photophysical study of carbonyl-containing isocyano rhenium(I) diimine complexes

New classes of tunable rhenium(I) diimine luminophores with formula of [Re(CO)(CNR)(3)(N-N)]PF(6) and [Re(CO)(L(x))(CNC(6)H(4)Cl-4)(2)(1,10-phenanthroline)]PF(6), (R = C(6)H(5), 4-BrC(6)H(4), 4-ClC(6)H(4), 4-MeOC(6)H(4), 2,6-(i)Pr(2)C(6)H(3); N-N = 1,10-phenanthroline, 5,6-dibromo-1,10-phenanthroline, 4,4'-di-tert-butyl-2,2'-bipyridine; L(x) = MeCN, pyridine and PPh(3)) have been synthesized. Different synthetic routes including photo-ligand substitution and thermal carbonyl ligand substitution through the oxidative decarbonylation with trimethyl amine N-oxide, for the facial and meridional isomeric forms of [Re(CO)(CNR)(3)(N-N)]PF(6) were investigated. On the basis of these synthetic strategies, different ligand modification and functionalization of the rhenium(I) diimine luminophores with tailored excited state properties could be readily achieved. The structures of both facial and meridional conformations of [Re(CO)(CNR)(3)(N-N)]PF(6) and the complex precursors fac-[Re(CO)(3)(CNC(6)H(3)(i)Pr-2,6)(3)]OTf were determined by X-ray crystallography. These complexes display an orange to red (3)MLLCT [dπ(Re) → π*(N-N)] phosphorescence at room temperature. Detailed photophysical investigations revealed that the physical, photophysical, electrochemical, and excited state properties can be fine-tuned and tailored through the modifications of the substituents on isocyanide or diimine ligands.     

Synthesis and characterization of organometallic rhenium(І) and technetium(І) bile acid complexes

Eight bile acid derivatives have been synthesized with alkyl chains of various length based tridentate ligand chelating system. These derivatives have been reacted with the precursor [Et₄N]₂[Re(CO)₃Br₃] and fac-[M(CO)₃(H₂O)₃]⁺ (M = ^99mTc, Re) in ethanol or ethanol–aqueous media to form water-soluble and stable organometallic complexes in good yields. ¹H NMR, ¹³C NMR, IR and elemental analysis or HRMS spectroscopic analyses confirmed the tridentate complexation of the metal–tricarbonyl fragment exclusively via the tridentate chelates. In addition, the corresponding radioactive technetium-99m complexes were prepared successfully and challenged for stability in physiological phosphate buffer at 37 °C for 24 h. No decomposition of the complexes could be detected under the condition proving the stability of these complexes.     

Palladium(II) complexes ofN-alkyl phenothiazines

Summary Eight square-planar palladium(II) complexes, PdLCl₂ (L=N-alkyl phenothiazine) have been synthesized. Analytical, conductometric, spectral (electronic, i.r. and n.m.r.) and thermal data for the complexes have been discussed.Part of the paper presented at the International Conference The Chemistry of the Platinum Group Metals, Bristol July 20–24th, 1981.