Bestimmung von Calcium, Magnesium, Strontium, Kalium, Natrium, Lithium, Eisen, Mangan, Chrom, Nickel, Kupfer, Cobalt, Zink und Cadmium

Zusammenfassung Für 14 Elemente wird eine universelle Methode beschrieben. Durch Zusatz von Lanthan und Cäsium werden die physikalischen, chemischen und Ionisations-Störungen in der Flammen-AAS ausgeschaltet. Es wird gezeigt, daß diese Methode für sehr unterschiedliche Stoffe mit Erfolg angewendet werden kann, und gleichzeitig die Genauigkeit des Routinemeßverfahrens nicht beeinträchtigt wird. Nur in Ausnahmefällen muß die Additionsmethode benutzt werden.

---

Determination of calcium, magnesium, strontium, potassium, sodium, lithium, iron, manganese, chromium, nickel, copper, cobalt, zinc and cadmium by flame AASA universal method for the analysis of waters, coals, ashes, ores, rocks, building materials, metals and similar samples

Summary A universal method is described for 14 elements. By addition of lanthanum and caesium the physical, chemical and ionization interferences in the flame AAS are eliminated. It is demonstrated that this method can be applied successfully for very different materials and simultaneously the precision of the standard measuring method is not affected. Only in exceptional cases the addition method has to be applied.

---

---

Herrn Prof. Dr. W. Schuhknecht, dem langjährigen Leiter des Zentrallabors der Saarbergwerke AG (1948–1972) zum Gedenken

---

Für die sorgfältige Durchführung von Säure- und Schmelzaufschlüssen sowie seine nützlichen Hinweise bei der Korrektur des Manuskriptes möchte ich Herrn Lothar Kiefer meinen besonderen Dank aussprechen.     

Instrumental neutron activation determination of Pt, Ru, Ir, Sc, Cr, Fe, Co, La, Ce, Nd, Sm, Yb, Lu, Hf and Ta employing CIRUS reactor as a thermal neutron source

An accurate and simple method has been developed for the determination of Pt, Ru, Ir and other elements employing instrumental neutron activation analysis (INAA). Nondestructive analysis has been carried out for the determination of these elements in different rock samples such as Dolerite, Dyke Dolerite, Country Basalt, Hyaloclastite, Trachyte, Ijolite, Spillite, Diorite and Lamprophyre from various locations like Daman, Tapti, Murud, Talasari, Ranala and Bassein in Maharashtra state. High flux provided by the CIRUS reactor (1×10¹³ n cm^–2s^–1) has been used for thermal neutron bombardment followed by radioassaying of the (n,) products on a HPGe detector coupled to a PC-based MCA unit.     

Bestimmung von Mikrospuren Bi, Co, Fe, In, Mn, Ni, Pb, Cu, Sb und Zn in Phosphors?ure und Ammoniumphosphaten

Zusammenfassung Es wurden Verfahren zur Bestimmung dieser 10 Elemente in Ammoniumphosphat bzw. Phosphorsäure entwickelt. Zur Anreicherung wurde die Extraktion der Dithiocarbamate, 8-Hydroxychinolinate und Pyrazolonate der Elemente angewendet. Die Bestimmung der Elementkonzentrationen erfolgte mittels Flammen-AAS und OES. Die nach den verschiedenen Verfahren erhaltenen Ergebnisse sind in guter Übereinstimmung. Die Nachweisgrenzen der einzelnen Elemente liegen, abhängig vom Verfahren, zwischen 1.10^–5 und 5.10^–8%.

---

Determination of microtraces of Bi, Co, Fe, In, Mn, Ni, Pb, Cu, Sb and Zn in phosphoric acid and ammonium phosphate.I. Flame atomic absorption and optical emission spectroscopic determination after preconcentration of the microtraces by extraction

Summary Two different methods are applied to the determination of the trace element content in ammonium phosphate, or phosphoric acid, respectively. The procedures involve two separate extraction systems based on ammonium pyrrolidine-dithiocarbamate, 8-hydroxyquinoline and 1-phenyl-3-methyl-4-benzoylpyrazolone-5, and two spectroscopic techniques — AAS and OES. The results obtained by the different methods are in good agreement. The detection limits of the separate trace elements vary from 1×10^–5 to 5×10^–8%.

     

Optimization of parameters for semiempirical methods. III Extension of PM3 to Be,Mg, Zn,Ga, Ge,As, Se,Cd, In,Sn, Sb,Te, Hg,Tl, Pb,and Bi

Using a recently developed procedure for optimizing parameters for semiempirical methods,¹ PM3 has been extended to a total of 28 elements. Average ΔH_f errors for the newly parameterized elements are Be: 8.6, Mg: 8.4, Zn: 5.8, Ga: 14.9, Ge: 11.4, As: 8.5, Se: 11.1, Cd: 2.6, In: 11.3, Sn: 9.0, Sb: 13.7, Te: 11.3, Hg: 6.8, Tl: 6.5, Pb: 7.4, and Bi: 10.9 kcal/mol. For some elements the paucity of data has resulted in a method, which, while highly accurate, is likely to be only poorly predictive.     

Preconcentration of manganese,cobalt, yttrium,zirconium, niobium,ruthenium, europium and protactinium by various hydroxides

Summary The removal of trace elements from dilute water solutions by hydroxide precipitates was investigated. The co-precipitation yields of manganese, cobalt, ruthenium, europium and protactinium onto beryllium, zinc, iron, lanthanum and titanium hydroxides were studied in the pH region from 3 to 11, while those of manganese, cobalt, yttrium, zirconium, niobium, ruthenium, europium, and protactinium onto the same hydroxides were investigated in sea-water media. The influence of some other factors, such as the presence of neutral electrolyte and NH₄ ⁺ ions, aging of hydroxide precipitates etc. on the co-precipitation yields were also examined.

---

Zusammenfassung Die Entfernung von Spurenelementen aus verdünnten wäßrigen Lösungen durch Hydroxidniederschläge wurde untersucht. Die mitgefällten Anteile Mn, Co, Ru, Eu und Pa in den Hydroxiden von Be, Zn, Fe, La und Ti wurden im pH-Bereich 3–11 untersucht, während die Anteile von Mn, Co, Yt, Zr, Nb, Ru, Eu und Pa in den gleichen Hydroxiden in Meerwasser studiert wurden. Der Einfluß einiger anderer Faktoren auf die Mitfällung, wie die Anwesenheit neutraler Elektrolyte und von NH₄-Ionen, die Alterung der Hydroxidniederschläge usw. wurden ebenfalls geprüft.

     

Solvent Extraction Studies of Two Isomeric 5, 7, 7, 12, 12, 14-Hexamethy-1, 4, 8, 11-Tetraazacyclotetradecanes

The distribution ratios of two isomeric 5, 7, 7, 12, 12, 14-hexamethyl-1, 4, 8, 11-tetraazacyclotetradecane, tet c and tet d, in several solvent systems at 25.0°C as functions of hydrogen ion concentration were determined. The protonation constants and the distribution constants of these macrocyclic ligands and their protonated species were obtained from the variations of the distribution ratios in the range of 6<–log [H⁺]<14.     

Quaternäre Magnesium-Iridiumboride Mg2Xlr5B2 mit X = Be,Al, Si,P, Ti,V, Cr,Mn, Fe,Co, Ni,Cu, Zn,Ga, Ge,As – eine Besetzungsvariante des Ti3Co5B2-Typs

Quaternary Magnesium Iridium Borides Mg₂XIr₅B₂ with X = Be, Al, Si, P, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As – a Substitution Variant of the Ti₃Co₅B₂ Type of Structure The compounds Mg₂XIr₅B₂ with X = Be, Al, Si, P, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge and As crystallize tetragonally with Z = 2 in the space group P4/mbm. The lattice constants are in the range a = 9.199 Å, c = 2.880 Å for Mg₂BeIr₅B₂ und a = 9.406 Å, c = 2.953 Å for Mg₂TiIr₅B₂ (further lattice constants are given in Table 1). X-ray structure determinations carried out with single crystals of the Si-and the P-compounds showed that a substitution variant of the Ti₃Co₅B₂ type of structure is formed. According to X-ray powder photographs the other compounds are isotypic. In the compounds with X = P and As the X-siteset is only occupied at about 70% and 80% respectively.     

SYNTHESIS AND CRYSTAL STRUCTURE OF 5, 10, 15, 20, 22, 24-HEXAHYDRO-5, 5, 10, 10, 15, 15, 20, 20-OCTAMETHYL-PORPHINE

<正> The title com pound (HHOMP) has been synthesized with the pho-toinduced condensation of acetone and pyrrole in the presence of iodoaromatic hydrocarbons, and its molecular and crystal structures have been determined by X-ray analysis. C28H36N4, Mr = 428. 63, triclinic; space group P1; a =10. 165(3), b = 10. 185(2), c=13. 012(3)(?); α=85. 41(2), β=67. 84(2), γ= 89. 75(2)°; V = 1243 (?)3; Z = 2; D = 1. 145g. cm-3; μ= 0. 635cm-1; F (000) = 464. Although the HHOMP molecule twists, it is found that the four nitrogen atoms are still in a plane.     

Determination of Ca, K, Mg, Na, sulfate, phosphate, formate, acetate, propionate, and glycerol in biodiesel by capillary electrophoresis with capacitively coupled contactless conductivity detection

In this work, a new method employing capillary electrophoresis (CE) for the determination of several species in biodiesel is introduced. The concentrations of inorganic species (Na⁺, K⁺, Ca²⁺, Mg²⁺, SO₄²⁻, and PO₄³⁻) and glycerol are of interest to the regulatory authorities due to their ability to form undesirable compounds in engines. Additionally, other species of low molecular weight (e.g., acetate, formate, and propionate) are of interest because they contribute towards increasing the acidity. These species are formed by the degradation of biodiesel and cause damage to engines and the environment. The cation separation was performed in background electrolyte (BGE) composed of 30 mmol L⁻¹ of 2-(n-morpholino)ethanesulfonic acid (MES)/L-histidine (His), pH 6. The separation of anionic species was carried out in similar BGE with 0.2 mmol L⁻¹ cetyltrimethylammonium bromide (CTAB) added. For glycerol, a neutral species, its oxidation with periodate was employed. This well-known reaction is specific to polyols and generates iodate. The amount of iodate produced by the reaction was determined by CE. The separation was carried out in approximately 1 min using BGE composed of 30 mmol L⁻¹ acetic acid, pH 3. The analytical parameters evaluated were: linearity (r > 0.99), the RSD values for area and migration time were < 3.4% and 0.9%, respectively, and recovery was in the range of 89 to 107%.     

Mackay,Anti-Mackay,Double-Mackay,Pseudo-Mackay,and Related Icosahedral Shell Clusters

Mackay introduced two important crystallographic concepts in a short paper published 40 years ago. One is the icosahedral shell structure (iss) consisting of concentric icosahedra displaying fivefold rotational symmetry. The number of atoms contained within these icosahedral shells and subshells agrees well with the magic numbers in rare gas clusters, (C₆₀) _N molecules, and some metal clusters determined by mass spectroscopy or simulated on energy considerations. The cluster of 55 atoms within the second icosahedral shell occurs frequently and has been called Mackay icosahedron, or simply MI, which occurs not only in various clusters, but also in intermetallic compounds and quasicrystals. The second concept is the hierarchic icosahedral structures caused by the presence of a stacking fault in the fcc packing of the successive triangular faces in the iss. For instance, a fault occurs after the ABC layers resulting an ABCB packing. This is, in fact, a hierarchic icosahedral structure of a core icosahedron connected to 12 outer icosahedra by vertex sharing, or an icosahedron of icosahedra (double MI. Contrary to Mackay's iss, a faulted hierarchic icosahedral shell is, in fact, a twinlike face capping of the underlying triangles; it is, therefore, called an anti-Mackay cluster. The hierarchic icosahedral structure in an Al-Mn-Pd icosahedral quasicrystal has a core of body-centered cube rather than an icosahedron and, therefore, is called a pseudo-Mackay cluster. The hierarchic icosahedral structures have been studied separately in the past in the fields of clusters, nanoparticles, intermetallic compounds, and quasicrystals, but the underlying geometry should be the same. In the following a unified geometrical analysis is presented.     

Extraction-flame atomic absorption determination of microtraces of Ag, Bi, Cd, Co, Cu, Fe, Mn, Ni, Pb and Zn in ammonium sulphate

Summary A method was developed for the determination of 10 trace elements in ammonium sulphate, or sulphuric acid, respectively. The detection limits for the separate elements vary from 1×10^–5 to 5×10^–7%. The method includes a new approach for calibration in organic medium, consisting of conversion of the aqueous metal standards into chelate compounds in a homogeneous solution.A three-step optimization scheme for pulse aspiration of organic extracts is proposed which permits to obtain a highly reproducible and accurate signal. The solutions of the organic reagents used are subjected to a purification procedure, which lowers their impurity level for approx. one order of magnitude.

---

Extraktions-flammenatomabsorptiometrische Bestimmung von Mikrospuren Ag, Bi, Cd, Co, Cu, Fe, Mn, Ni, Pb und Zn in Ammoniumsulfat

Zusammenfassung Ein Verfahren wurde entwickelt zur Bestimmung dieser 10 Elemente in Ammoniumsulfat bzw. Schwefelsäure. Die Nachweisgrenzen der Elemente liegen zwischen 1 · 10^–5 und 5 · 10^–7%. Das Verfahren beinhaltet auch eine neue Methode zur Eichung in organischem Medium, die auf Umwandlung der wässrigen Metallstandardlösungen in Chelatverbindungen in homogener Lösung beruht. Eine dreistufige Optimierung des pulsierenden Ansaugens der organischen Extrakte wird vorgeschlagen, wodurch genaue und reproduzierbare Signale erhalten werden. Die Lösungen der organischen Reagentien werden einem Reinigungsverfahren unterzogen, das die Konzentration an Verunreinigungen um etwa eine Größenordnung senkt.

     

Organometallic gold(I)-pentafluorophenyl-P,O, As,S, TPA,dppm, dppe,dppa-coordinating-phosphines: synthesis and detailed spectroscopic characterisation

[Au(C₆F₅)(tht)], which on reaction with P, O, S-coordinating phosphines in CH₂Cl₂ medium leads to [Au(C₆F₅)(X)] [X = PPh₃ H, (1a), oMe, (1b), pMe, (1c), mMe, (1d), AsPh₃ (2), OPPh₃ (3), SPPh₃ (4), dppm, dppe, dppa = diphenylphosphino-methane,-ethane,-ammine(5, 6, 7), TPA = 135-tetraaza-7-phosphino adamentane(8), Py4H (9a), 4Bu (9b), 4Ac (9c), tht = tetrahydrothiophen, C₆F₅ is the pentafluorophenyl ring]. The maximum molecular peak of the corresponding molecule is observed in the ESI mass spectrum. I.r. spectra of the complexes show –C = C– and C₆F₅ stretching near at 1610 and 1510, 955, 800 cm⁻¹. The ¹H-n.m.r. spectra as well as ³¹P- (¹H)n.m.r. suggest solution stereochemistry, proton movement, phosphorus proton interaction. ¹³C-n.m.r. spectrum reflect the carbon skeleton in the molecule. In the ¹H–¹H COSY spectrum of the present complexes and contour peaks in the ¹H–¹³C-HMQC spectrum, assign the solution structure and stereoretentive conformation in each step.     

Determination of microtraces of Bi, Co, Cu, Fe, Mn, In, Ni, Pb, Sb and Zn in phosphoric acid and ammonium phosphate

Summary Methods for the determination of Bi, Co, Cu, Fe, Mn, In, Ni, Pb, Sb and Zn in phosphoric acid by ETA-AAS using the platform technique were developed. The detection limits are in the range of 1 to 30 ppb for conc. H₃PO₄. Relative standard deviations of 5–10% at 10 times the detection limits were achieved. The results obtained by five different atomic spectroscopic methods are in good agreement (direct Zeeman-ETA-AAS, D₂-ETA-AAS and FAAS; OES and FAAS after trace extraction).     

Determination of traces of As,Cd, Cr,Hg, Mn,Ni, Sb,Se, Sn and Pb in human hair by triple quadrupole ICP-MS

With the wide range of metallic contaminants discharged in the environment, studying the human health requires a growing number of elements to be monitored in biological samples. Hair analysis has been suggested as a suitable tool for biomonitoring environmental and occupational exposure to toxic elements. This study describes a method for the determination of 10 trace elements in hair samples using ICP-QQQ-MS. Combining the power of the MS/MS high-energy Helium mode with the MS/MS O₂ mass-shift mode, the method offers great analytical performances with detection limits reaching 0.0014 µg g^?1 for As, 0.0016 µg g^?1 for Cd, 0.012 µg g^?1 for Cr, 0.0035 µg g^?1 for Hg, 0.0055 µg g^?1 for Mn, 0.10 µg g^?1 for Ni, 0.0012 µg g^?1 for Sb, 0.0083 µg g^?1 for Sn, 0.011 µg g^?1 for Se and Pb. The accuracy of the method was tested on a human hair ERM® certified reference material. Percent recoveries varied from 91.3% and 106.9% being always in the acceptance range of 90–110%. For all analysed elements, RSD% of repeatability ranged between 0.6% and 9.0% and those of intermediate precision did not exceed the limit of 20% being always lower than 10% (except for As). The proposed method was applied for the determination of trace elements in hair samples from 20 unexposed subjects. The geometric mean levels were as follows: Cr 0.28 µg g^?1, Mn 0.30 µg g^?1, Sn 1.04µg g^?1, Sb 0.07 µg g^?1, Hg 0.42 µg g^?1, As 0.02 µg g^?1, Cd 0.03 µg g^?1, Ni 0.51 µg g^?1, Se 0.45 µg g^?1 and Pb 1.83 µg g^?1. Element concentrations were in the same range with the reported data. The reported results may be useful for environmental exposure assessment or comparisons studies when establishing reference values of trace elements in exposed population.     

Eine mikromethode der flammen-atomabsorptions- und emissionsspektrometrie (platinschlaufen-methode)—II: Die bestimmung von As,Bi, Cd,Hg, Pb,Sb, Se,Te, Tl,Zn/Li,Na, K,Cs, Sr,Ba

This paper described the continuation of the work of Part I dealing with a microanalytical method in which the sample is introduced into a flame using an electrically heated platinum loop. This device is used in connection with an atomic absorption (AA) spectrometer. The detection limits are one to two orders of magnitude better than those of conventional flame AAS. The reproducibility depends on the element and is in general 3–5% (relative standard deviation) for concentrations in the $\text{ng}\text{ml}$ range. The platinum loop method can be also applied for flame emission analysis of small amounts of sample or the determination of low concentrations (alkalis). This application gives access to determinations in the lower ng or the pg range (detection limit of lithium: 0.6 pg).     

The flame photometric determination of Fe,Ni, Co,Cu, Mn,Cr, and Al in waters

Summary A method for the flame photometric determination of Fe, Ni, Co, Cu, Mn, Al, and Cr in various waters is described. Samples can be analysed directly after removal of interfering anions or after separation (and concentration) of the elements to be determined from any interfering cations. Fe, Ni, Co, and Cu are extracted as carbamates, Al as cupferronate, and Cr as the ion-association complex HCrO₃Cl. The extractant used for all is hexone.The elimination of the interference of Mg with Fe is discussed. The variation of the relative error of the emission measurement with the concentration of the elements was investigated.

---

Zusammenfassung Eine Methode zur flammenphotometrischen Bestimmung von Fe, Ni, Co, Cu, Mn, Al und Cr in Wässern wurde beschrieben. Nach Entfernung der störenden Anionen oder nach Abtrennung (und Anreicherung) der zu bestimmenden Elemente von etwa störenden Kationen können die Proben direkt analysiert werden. Fe, Ni, Co und Cu werden als Carbamate extrahiert, Al als Cupferronat und Cr in Form des Ionen-Assotiationskomplexes HCrO₃Cl. Als Extraktionsmittel dient in allen Fällen Hexon.Die Beseitigung des störenden Einflusses von Magnesium bei der Eisenbestimmung wurde diskutiert. Die Variation des relativen Fehlers der Emissionsmessung mit der Konzentration der Elemente wurde untersucht.

---

Résumé On décrit une méthode pour le dosage par photométrie de flamme du Fe, Ni, Co, Cu, Mn, Al et Cr dans des eaux variées. On peut faire l'analyse directe après élimination des anions qui interfèrent ou après séparation (et concentration) des éléments à doser d'avec les cations gênants. On extrait Fe, Ni, Co et Cu sous forme de carbamates, Al en cupferronate, et Cr à l'état de complexe par association ionique, HCrO₃Cl. Dans tous les cas, on utilise l'hexone comme agent d'extraction.On discute l'élimination de l'interférence du Mg par le Fe. On a suivi la variation de l'erreur relative dans la mesure de l'émission en fonction de la concentration des éléments.

---

---

Paper presented at the Symposium on Analytical Chemistry, Graz, 29th September–1st October 1965.     

Organogermyl,Organostannyl, and Organoplumbyl Phosphines,Arsines, Stibines,and Bismuthines

The preparation, properties, and reactions of the compounds named in the title are described, with particular reference to the possible participation of (p→d)_π components in the bonding between the group IVB and the group VB elements.     

Zn11Rh18B8 and Zn10MRh18B8 with M = Sc,Ti, V,Cr, Mn,Fe, Co,Ni, Cu,Al, Si,Ge, Sn – New Ternary and Quaternary Zinc Rhodium Borides

Zn₁₁Rh₁₈B₈ and Zn₁₀MRh₁₈B₈ with M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Al, Si, Ge and Sn are obtained by reaction of the elemental components in sealed tantalum tubes at 1500 K. They crystallize tetragonally with Z = 2 in the spacegroup P4/mbm with lattice constants a = 1771.2(2) pm, c = 286.40(4) pm for Zn₁₁Rh₁₈B₈ and in the range a = 1767.65(9) pm, c = 285.96(3) pm (Zn₁₀NiRh₁₈B₈) to a = 1774.04(9) pm, c = 286.79(2) pm (Zn₁₀SnRh₁₈B₈) for the quaternary compounds. According to powder photographs all compounds are isotypic. Struture determinations based on single crystal X-ray data were performed with Zn₁₁Rh₁₈B₈, Zn₁₀FeRh₁₈B₈ and Zn₁₀NiRh₁₈B₈. The structure of Zn₁₁Rh₁₈B₈ is related to the Ti₃Co₅B₂ type. Along the short axis planar nets of rhodium atoms composed of triangles, squares, pentagons and elongated hexagons alternate with layers containing the boron and zinc atoms. The rhodium atoms form trigonal prisms centered by boron atoms, two kinds of tetragonal and pentagonal prisms centered by zinc atoms and elongated hexagonal prisms containing pairs of zinc atoms. In the quaternary compounds Zn₁₀MRh₁₈B₈ the zinc atoms in one sort of tetragonal prisms are replaced by M atoms.     

Synthesis, structures, physicochemical properties, and crystal-chemical systematics of M 2II AIIUO6 (MII = Pb, Ba, Sr; AII = Mg, Ca, Sr, Ba, Mn, Fe, Co, Ni, Cu, Zn, Cd, Pb) compounds

Pb₂A^IIUO₆ (A^II = Mg, Ca, Sr, Ni, Zn, Cd) compounds were synthesized by high-temperature reactions in the solid phase. For the Pb₂MgUO₆, Pb₂CaUO₆, and Pb₂CdUO₆ compounds, the crystal structures (space group P2₁/n) were refined by the Rietveld method. It was demonstrated that these structures belong to the perovskite structure type. Crystal-chemical systematics was performed for all synthesized perovskites. High-temperature X-ray diffraction and differential scanning calorimetry were used to study the thermal stability and phase transitions, determine the thermal expansion coefficients, and elucidate the effect of atoms located in octahedral and cuboctahedral positions on the heating behavior of the structure. The standard enthalpies of formation of the Pb₂A^IIUO₆ compounds were determined by reaction calorimetry.