Radiolytic degradation of octachlorodibenzo-p-dioxin and octachlorodibenzofuran in organic solvents and treatment of dioxin-containing liquid wastes

Degradations of octachlorodibenzo-p-dioxin (OCDD) and octachlorodibenzofuran (OCDF) were studied by ⁶⁰Co γ-ray in organic solvents: ethanol, n-nonane, and toluene. Both OCDD and OCDF were degraded more efficiently in ethanol than in n-nonane or toluene. The degradation is mainly attributed to electrons and in part to solvent radicals. The addition of ethanol to dioxin-containing liquid wastes enhanced effectively the degradation of dioxins; the liquid wastes did not exhibit the dioxin toxicity at a dose of 100 kGy.     

Analytical methods for personal-care products in environmental waters

Personal-care products (PCPs) are organic chemicals widely used in human life daily. Among the most recently studied PCPs, we can find ultraviolet filters, preservatives, antimicrobials, musk fragrances, insect repellents and siloxanes. PCPs are increasingly important emerging organic contaminants due to their presence in environmental waters.We present a review of the most important extraction and chromatographic techniques used to determine PCPs in waters. We also review data regarding the occurrence of these compounds in different kinds of environmental waters and the removal of these compounds in sewage-treatment plants.     

Advanced green analytical chemistry for environmental pesticide detection

1. Download : Download high-res image (316KB)
2. Download : Download full-size image

     

Multifunctional sorbents for the extraction of pesticide multiresidues from natural waters

In this work multifunctional sorbents, based on surfactant-coated mineral oxides, are assessed for the simultaneous extraction/preconcentration of pesticide multiresidues from aqueous environmental samples. Seventeen pesticides, representative of all the common groups (triazines, phenylureas, carbamates, azols, anilides, chloroacetanilides, organophosphorous, phenoxyacids, aryloxy acids and phenols), are selected for this study. The sorbents assessed are pure sodium dodecyl sulphate (SDS) and mixed tetrabutylammonium (TBA)-SDS hemimicelles and/or admicelles adsorbed onto alumina. Because of their multifunctional character, these sorbents provide different retention mechanisms (i.e. hydrophobic, ionic and/or π-cation interactions), which highly contribute to the efficient retention of pesticides with different polarities and acidities (bases, neutrals and acids). In addition, the low volume of eluent required for complete elution of analytes (typically 1-2 mL) avoided the need of using time-consuming and tedious evaporation steps that generally are needed when cross-linked polymeric resins or carbon materials are used as sorbents. The performance of two sorbents, i.e. SDS and TBA-SDS mixed hemimicelles/admicelles, for the admicellar solid-phase extraction (ASPE) of pesticide multiresidue was comparatively investigated. The latter was selected on the basis of the higher breakthrough volumes permitted, the lower volume of eluent required and the higher sample and eluent flow rates allowed. The proposed ASPE/LC/UV approach provided detection limits lower than 100 ng L⁻¹ for the determination of the 17 pesticides tested. Recoveries from spiked (at the ng L⁻¹ level) river and underground water samples was quantitative for most of the pesticides tested.     

A method for the determination of technetium in environmental waters

A method is described which can be used to determine technetium-99 levels in a range of water types. Ruthenium isotopes which may interfere in the analysis are removed from the sample by precipitation before concentration of pertechnetate onto an ion-exchange column. Other nuclides can be removed from the column using NaOH before elution of the technetium using NaSCN. The technetium in the NaSCN eluent can then be extracted into butan-2-one which can be evaporated onto a planchette. Technetium-99m is used as a yield tracer and after this has decayed away to negligible levles the amount of technetium on the planchette can be determined by measuring the rate of beta radiation emission from the final concentrate.     

A microscale Kjeldahl nitrogen determination for environmental waters

A microscale Kjeldahl system has been designed which has been homemade reduced. The digestor unit of a macroKjeldahl system and a modified glassware microdistillation unit have been used. The optimal conditions for digestion and distillation have been established for ammonium and methylamine as model compound of organic amino nitrogen. The optimised procedure has been applied to the determination of Kjeldahl nitrogen in water samples. Recoveries near 100% and good precision have been achieved. This procedure combines nitrogen miniaturized system and the use of a selective ion electrode for ammonia detection. The analysis time was reduced 4.8 times and the analysis cost 6.6 times compared with classical procedure. The residues generated have been also markedly minimized. A preconcentration factor of 4 instead of 1.5 obtained by the macroscale design has been achieved.     

Influence of matrix on suitability of four methods for organochlorine pesticide analysis in waters

The monitoring of organochlorine pesticides has raised a great concern in the last years due to their toxicity (some of them are carcinogenic and endocrine disruptor compounds) and persistence. European Directive 2008/105/EC establishes very restrictive levels for organochlorine pesticides in surface waters. Therefore, simple, fast, highly sensitive and low cost analytical methods are required to detect and quantify these pollutants in water. In the present work, four procedures for extraction and determination are proposed and compared for the analysis of 28 organochlorine pesticides in tap, surface and sea waters. The suitability of each method of analysis was evaluated for each kind of water. The extraction methods proposed were: two solid-phase extraction methods using C₁₈ laminar disk and Oasis HLB cartridges, a solid-phase microextraction procedure using a polydimethylsiloxane/divinylbenzene (PDMS/DVB) fibre, and a micro liquid–liquid extraction procedure using ethyl acetate as solvent. Determination of pesticides was performed by large volume on-column injector-gas chromatography-electron capture detection (LVOCI-GC-ECD), splitless-GC-ECD and GC-MS (mass spectrometry). All methods present a good sensitivity with method detection limits lower than 10?ng?L^?1, good accuracy with recoveries between 75 and 120% (with some exceptions) and good precision (relative standard deviations <15%), according to the Commission Decision 2002/657/EC criteria. The advantages and disadvantages of each method are discussed in terms of the green chemistry principles, the figures of merit and the matrix effect. This work tries to be a useful guidance for routine and control analysis laboratories.     

Diazotized reagent for spectrophotometric determination of glyphosate pesticide in environmental and agricultural samples

A new sensitive spectrophotometric method for the determination of glyphosate herbicide in environmental and agricultural samples is developed. The reaction is based on diazotization followed by coupling of glyphosate with p-dimethyl amino benzaldehyde. The resulted complex absorption spectra was observed at λ_max = 420 nm. The effects of other metal ions and pesticides were also tested for selective determination of glyphosate. The analytical parameters were optimized and have been successfully applied for determination of glyphosate in various environmental samples such as soil, water and vegetables. This method has a lower limit detection of 6 μg of glyphosate. Beer's law is obeyed over the concentration range of 6.0 μg–24.0 μg glyphosate in 25 mL of the final solution at 420 nm. The standard deviation and relative standard deviation calculated are 0.0055 and 1.023, respectively. The molar absorptivity of the colored system is 1.91 × 10¹⁰ L mol^?1cm^?1 and Sandell's sensitivity is found 0.408 × 10^?5 μg cm^?2. The proposed method is simple, sensitive, highly reproducible and time saving as compare to those complicated time consuming methods.     

An optical ammonium-sensor for the analysis of environmental waters

Summary For monitoring the ammonium content in environmental waters an optical sensor was developed. The sensor is based on a glass rod coated with a caoutchouc layer in which bromophenolblue was immobilized as indicator. A detection limit of 3 mol/l ammonium is obtained.     

Capillary electrochromatography for pesticide analysis: effects of environmental matrices

An insecticide, pirimicarb, and a fungicide, azoxystrobin, were analyzed by capillary electrochromatography. Nine environmental matrices derived from soil, plant and animal extracts were used. After a series of 311 consecutive injections with no washing between injections, retention times increased by ca. 0.5 min. The use of exaggerated application rates for metabolism studies enabled the detection of xenobiotic pesticide degradates by UV absorbance. A 1.2 mm path length, high-sensitivity flow cell gave a gain in sensitivity; however, a further increase in sensitivity of at least two orders of magnitude is required for pesticide residue analysis. Analyte stacking using large volume injections of aqueous samples led to a large increase in retention times.     

Behaviour of semipermeable membrane devices in neutral pesticide uptake from waters

The application of semipermeable membrane devices (SPMDs) has been evaluated as a passive sampler for the collection of multiresidue pesticides in continental waters. Seven chlorinated, five organophosphorus, six carbamate, nine pyrethroid and ten other pesticides were tested in order to estimate which compounds can be retained with these devices. The effect of water parameters, such as temperature, pH, ionic strength and organic matter content, were evaluated for their effect on the retention of the pesticides by the SPMDs. Studies of uptake from water were performed in a glass beaker containing 2 L distilled water spiked with 50 ng L⁻¹ of each pesticide investigated. A SPMD was put in the beaker, under turbulent conditions, and analysed after 2 days’ extraction. The contents of each SPMD were microwave-assisted-extracted twice with 30 mL hexane–acetone, to 90 °C for 10 min, and this was followed by a cleanup based on acetonitrile partitioning and solid-phase extraction. Gas chromatography with tandem mass spectrometry detection was employed for determination of pesticides, and provided low limits of detection from 0.5 to 7 ng per SPMD. Higher absorption rates were observed for pyrethroid, organophosphorus and chlorinated compounds than for carbamates. Pesticide uptake rates were independent of the water composition and decreased at low temperature. Electronic supplementary material The online version of this article contains supplementary material, which is available to authorized users.     

A review of liquid chromatography in environmental pesticide analysis

Summary The use of liquid chromatography in environental pesticide analysis is reviewed. In addition to classical UV and electrochemical detectors, detection systems such as mass spectromytry and gas chromatographytype detectors are discussed. The applicability of supercritical fluid chromatography to pesticide analysis is also reviewed.Presented at the 18th International Symposium on Environmental Analytical Chemistry, Barcelona 5–8 September, 1988.     

Ultrasound-assisted emulsification-microextraction of emergent contaminants and pesticides in environmental waters

The analytical use of ultrasound-generated emulsions has recently found a growing interest to improve efficiency in liquid-liquid extraction since they increase the speed of the mass transfer between the two immiscible phases implied. Thus, dispersed droplets can act as efficient liquid-liquid microextractors in the continuous phase, and later they can be readily separated by centrifugation. A novel method based on ultrasound-assisted emulsification-microextraction (USAEME) and gas chromatography coupled to mass spectrometry (GC/MS) has been developed for the analysis of synthetic musk fragrances, phthalate esters and lindane in water samples. Extraction conditions were optimized using a multivariate approach. Compounds were extracted during 10 min in an acoustically emulsified media formed by 100 microL chloroform and 10 mL sample (enrichment factor=100). The method performance was studied in terms of accuracy (recovery=78-114%), linearity (R2> or =0.9990) and repeatability (RSD< or =14%). Limits of detection (LODs) were at the pg mL(-1) level for most of compounds, and at the sub-ng mL(-1) level for the most ubiquitous phthalate esters. USAEME is proposed as an efficient, fast, simple and non-expensive alternative to other extraction techniques such as SPE, SPME and LPME for the analysis of environmental waters including bottled, tap, river, municipal swimming pool, sewage and seaport water samples. Since no matrix effect has been found for any of the water types analyzed, quantification could be carried out by using conventional external calibration, thus allowing a higher throughput of the analysis in comparison with other microextraction techniques based on equilibrium such as solid-phase microextraction.     

Simultaneous extraction and determination of various pesticides in environmental waters

A simple and rapid method was developed for the simultaneous analysis of nine different pesticides in water samples by gas chromatography with mass spectrometry. A number of parameters that may affect the recovery of pesticides, such as the type of solid‐phase extraction cartridge, eluting solvent in single or combination and their volumes, and water pH value were investigated. It showed that three solid‐phase extraction cartridges (Strata‐X, Oasis HLB, and ENVI‐18) produced the greatest recovery while ethyl acetate/dichloromethane/acetone (45:10:45, 12 mL) followed by dichloromethane (6 mL) was efficient in eluting target pesticides from solid‐phase extraction cartridges. Different water pH values (4–9) did not show a significant effect on the pesticides recovery. The optimized method was verified by performing spiking experiments with a series of concentrations (0.002–10 μg/L) in waters, with good linearity, recovery, and reproducibility for most compounds. The limit of detection and limit of quantification of this optimized method were 0.01–2.01 and 0.02–6.71 ng/L, respectively, much lower than the European Union environmental quality standard for the pesticides (0.1 μg/L) in waters. The proposed method was further validated by participation in an interlaboratory trial. It was then subsequently applied to river waters from north‐east Scotland, UK, for the determination of the target pesticides.     

Immunosorbents: A new tool for pesticide sample handling in environmental analysis

 Immunoaffinity techniques have been widely used for the determination of different analytes in the medical field. However the use of antibodies immobilized in an appropriate support material to preconcentrate pesticides from environmental samples is only recent. The production of antibodies, election of supports, antibody immobilization procedures, elution of analytes from immunosorbents and the more recent applications in the field of pesticide analysis are reviewed. The present review concludes that immunosorbents have great potential and discusses the present limitations and expected future trends. Received: 29 July 1996 / Accepted: 14 August 1996     

A simple visual method for the determination of phosphorus in environmental waters

Summary The visual method proposed here for the determination of phosphate ion in environmental water samples does not need any instrument. The highly sensitive method is based on the observation of the blue color produced as the result of ion association of phosphomolybdate and malachite green in acidic medium. Down to 10 ppb of phosphate-phosphorus can be determined by addition of 1 ml of reagent solution to 4 ml of sample in a test tube. The method has been effectively used for the determination of phosphate ion which is a nutrient for phytoplakton in brackish lakes and rivers.

---

Einfaches visuelles Verfahren zur Phosphorbestimmung in Umwelt-Gewässern

     

A new analytical approach for 226Ra and 228Ra in environmental waters

The concentration of Ra isotopes in environmental water can be determined from the amount of Ra isotopes recovered in two successive batch operations a using cation exchange resin. The present analytical method is applicable to 10 liter of sample water having a Ra concentration larger than 10 mBq/l and is also applicable to the ordinary underground water of less than 1 mBq/l by use of 50 liter of sample water. In case where Ra concentration is extremely low, Mn-impregnated acrylic fiber can be used with a larger volume of water sample as an absorbent by soaking it in the water.     

Porous monolithic materials for extraction and preconcentration of pollutants from environmental waters

This review presents the strengths and weaknesses of monolithic materials for the enrichment of inorganic and organic contaminants in environmental waters. We describe the most common materials (silica, organic, and hybrid organic silica) and strategies for constructing monoliths in different moulds and shapes (tubes, cartridges, stir bars, fibers) published since 2015. The functionalization of the pore surfaces enhances their affinity towards different classes of pollutants. For instance, the incorporation of chelating groups enables the enrichment of potentially toxic metals and semi-metals in aquatic environments before the analyses by spectrometric techniques. Monolithic materials for extracting emerging pollutants, diverse classes of herbicides, and fungicides were proposed recently. Incorporation of carbon-based and magnetic nanoparticles, metal-organic frameworks, and ionic liquids enhanced their adsorption capacity by either increasing the surface area or providing multiple retention mechanisms. Monoliths with molecular recognition properties for highly selective extractions have been synthesized, including boronic functionalities and molecularly imprinted cavities. The final part describes the hybrid organic silica monoliths, emphasizing metal ions and speciation analysis hyphenated with ICP-MS. In the outlook section, we point to some fields we believe monoliths will benefit, such as their 3-D technologies preparation. We also pointed their potential applicability in portable chromatographic systems, restricted access materials, and enhanced use to preconcentrate viruses from aquatic environments.     

Dispersive liquid-liquid microextraction combined with high performance liquid chromatography-fluorescence detection for the determination of carbendazim and thiabendazole in environmental samples

A rapid and sensitive method for the determination of carbendazim (methyl benzimidazole-2-ylcarbamate, MBC) and thiabendazole (TBZ) in water and soil samples was developed by using dispersive liquid-liquid microextraction (DLLME) coupled with high performance liquid chromatography with fluorescence detection. The water samples were directly used for the DLLME extraction. For soil samples, the target analytes were first extracted by 0.1 mol L⁻¹ HCl. Then, the pH of the extract was adjusted to 7.0 with 2 mol L⁻¹ NaOH before the DLLME extraction. In the DLLME extraction method, chloroform (CHCl₃) was used as extraction solvent and tetrahydrofuran (THF) as dispersive solvent. Under the optimum conditions, the enrichment factors for MBC and TBZ were ranged between 149 and 210, and the extraction recoveries were between 50.8 and 70.9%, respectively. The linearity of the method was obtained in the range of 5-800 ng mL⁻¹ for water sample analysis, and 10-1000 ng g⁻¹ for soil samples, respectively. The correlation coefficients (r) ranged from 0.9987 to 0.9997. The limits of detection were 0.5-1.0 ng mL⁻¹ for water samples, and 1.0-1.6 ng g⁻¹ for soil samples. The relative standard deviations (RSDs) varied from 3.5 to 6.8% (n = 5). The recoveries of the method for MBC and TBZ from water samples at spiking levels of 5 and 20 ng mL⁻¹ were 84.0-94.0% and 86.0-92.5%, respectively. The recoveries for soil samples at spiking levels of 10 and 100 ng g⁻¹ varied between 82.0 and 93.4%.