Photo-lithographically impregnated and molecularly imprinted polymer thin film for biosensor applications

A voltammetric sensor for albuterol was investigated where we combined the techniques of microfabrication and molecular imprinting to construct on-chip devices using photoirradiation of cross-linkable polymers. Molecularly imprinted polymer was coated as a thin film onto the gold working electrode on chip and the analyte was directly quantified by differential pulse voltammetric measurements.     

Amperometric ion sensors based on laser-patterned composite polymer membranes

A polymer membrane for the selective amperometric transfer and sensing of molecular ions has been designed and characterised. The membrane was formed from two polymer layers, a supporting film of polyethylene terephthalate on which an electrolyte film containing polyvinylchloride is cast. The polyester layer has a laser-etched pattern of circular micro-holes in one region. These hole structures are arranged in a rectangular geometry and measure 22 μm in diameter with separation distances of 105 μm and 120 μm. The polyvinylchloride underlayer is a composite system comprised of a 2-nitrophenyl octyl ether plasticising solution containing an electrolytic salt of tetrabutylammonium tetrakts-(4-chlorophenyl)borate. In this way, an array of micro-interfaces between an analyte solution and a PVC gel electrolyte is formed and used as a liquid|liquid interface for the amperometric monitoring of ion transfer reactions. The membrane was characterised in terms of the voltammetric response to choline transfer. The study includes an examination of the fabrication methodology, materials composition and membrane structure.     

Molecularly imprinted polymer nanocarriers for recognition and sustained release of diclofenac

In this study, a series of imprinted poly(methacrylic acid‐co‐ethylene glycol dimethacrylate) nanocarriers for diclofenac and corresponding nonimprinted polymer nanocarriers have been synthesized in 4 different types of solvents by precipitation polymerization. The products were characterized by Fourier transform infrared, scanning electron microscopy, dynamic light scattering, and Brunauer‐Emmett‐Teller measurement. Results showed that uniformly sized molecularly imprinted polymer (MIP) nanospheres with relatively good porosity could only be obtained in acetonitrile. The effects of solvents on the recognition and release properties of polymer particles were also carefully investigated. The binding experiments indicated that MIPs prepared in acetonitrile displayed much higher binding capacity than other MIPs with a maximum binding capacity of 65.18 mg g⁻¹. The Scatchard analysis showed that synthetic MIPs have special recognition sites for diclofenac, while nonimprinted polymers have not. The Sips model could provide a best fit to the equilibrium data of nanocarriers over whole concentrations. The experimental data of an adsorption kinetic study were well fitted to the pseudo–second‐order kinetic model, indicating the chemisorption mechanism between diclofenac and MIPs in the process of adsorption. The drug release of diclofenac from MIPs could well be described by the Ritger‐Peppas model, suggesting a non‐Fickian diffusion mechanism. In addition, we successfully used MIPs to extract diclofenac at low levels from fetal bovine serum.     

循环伏安法制聚(1,5-萘二胺)膜及其对紫外可见光吸收的研究

利用循环伏安法合成了1,5-萘二胺(1,5DAN)聚合物膜.从反应的介质、膜的厚度以及掺杂酸的种类等方面,讨论了制备电活性聚1,5-萘二胺(P1,5DAN)膜的影响,结果发现,在酸性水溶液中,初始的电活性比较高,但是,随着循环的继续,聚合物膜的电量损耗比较大,而在乙腈溶液中电量损耗较小;同时还发现,P1,5DAN电活性膜的厚度并不随总电量的增加而增厚;活性聚合物膜是受扩散控制,扩散系数(D)与酸根离子有关.最后,结合电化学,讨论了不同掺杂状态下的紫外可见吸收光谱(UV-Vis),并用FT-IR对所合成的聚合物作了结构表征.     

Electrochemistry of tetracyanoquinodimethane polyer-modified electrodes: Effect of polymer film composition on site-site interactions

Charge transport through polymer films containing the tetracyanoquinodimethane (tcnq) structure in the polymer chain and swollen with acetonitrile solvent has been studied as a function of film composition. Variation of the film composition was achieved by synthesis of a tcnq terpolymer and by casting blended films of the tcnq polyester and an isomorphic polyester containing a benzene ring in place of the tcnq structure. Formation of uniform blends at room temperature and below was indicated for the neutral polymers, but phase separation takes place on repeated cycling of the films between the 0 and −1 oxidation states. Redox center site-site interactions were probed by following dimer formation of the tcnq^.− radical anion and by the charge transport process as measured by chronocoulometric Cottrell slopes. ESR and cyclic voltammetric data indicate that interchain, and not interchain, interactions occur in the reduced films.     

分子印迹膜电化学传感器检测土壤中莠去津

本文报道了一种对莠去津有识别特性的分子印迹膜的制备,即在含和不含模板分子(莠去津)的情况下,通过循环伏安技术在金电极表面沉积2-巯基苯并咪唑,制备了2-巯基苯并咪唑聚合膜.利用循环伏安法对印迹和非印迹膜行为进行了评价,对分子印迹膜的影响因素进行了筛选和优化.实验表明,该分子印迹膜对莠去津具有良好的选择性和灵敏度.莠去津的还原峰电流与莠去津的浓度在 1.2 ×10 - 8mal/L～8.0 ×10 - 5mol/ L 范围内具有良好的线性关系( r=0.99862),检出限可达 3.0 ×10 - 9mol/ L.将此传感器用于土壤中莠去津的测定,回收率在90.8% ～ 98.2%之间,取得了很好的结果.     

Polymer films on electrodes: Part III. Digital simulation model for cyclic voltammetry of electroactive polymer film and electrochemistry of poly(vinylferrocene) on platinum

The electrochemistry of electrodeposited poly(vinylferrocene) (PVF) and poly(vinylferrocene acrylonitrile) (PVFAN) films on platinum electrodes was studied in acetonitrile solutions using perchlorate or p-toluenesulfonate as the counter ion by cyclic voltammetry. A model is proposed for the cyclic voltammetric behavior of polymeric films on electrode surfaces. The model incorporates non-equivalent redox sites with interconversion between such sites, electron-transfer kinetics at substrate/film interface and diffusion within the film. Parameters are obtained which yield a good fit to the experimental results.     

The effects of cross-linking and anodic surface roughening on quinone polymer/carbon electrodes

A polymer in which anthraquinone-2-carbonyl groups were bound to polyethyleneimine was coated onto a glassy carbon electrode. Electrodes of this kind were studied using cyclic voltammetry and pH 7 aqueous solutions. At pH <10 only those quinone units in contact with the carbon surface are electroactive. It was shown that anodic surface roughening increased the limited number of electroactive groups in the polymer film and gave more stable activity and narrower voltammetric peaks. Above pH 10 redox propagation through the layer is more rapid but the anionic product desorbs. This desorption was inhibited by cathodically cross-linking a layer of mixed polymers on a polyethyleneimine backboned polymer containing fluorenone units as well as anthraquinone units.     

Stripping voltammetry of trace metals in resistive solutions with mercury microelectrodes

Mercury-coated microcylindrical carbon-fiber electrodes (7-μm diameter) are suitable for anodic-stripping voltammetric quantitation of trace metals in non-aqueous solvents. The stripping voltammograms show no distortion resulting from uncompensated ohmic drops when traces of lead, cadmium, and zinc are quantified in acetonitrile, methanol or ethylene glycol. In contrast, analogous measurements at macro-sized electrodes exhibit severe ohmic effects. Organic solutions containing extremely dilute electrolyte (or no deliberately added electrolyte) can be assayed. A two-electrode configuration yields virtually undistorted stripping voltammograms in methanol and acetonitrile. High sensitivity and good precision are obtained by using quiescent solutions.     

A quercetin-modified biosensor for amperometric determination of uric acid in the presence of ascorbic acid

The present work reports a quercetin-modified wax-impregnated graphite electrode (Qu/WGE) prepared through an electrochemical oxidation procedure in quercetin-containing phosphate buffer solution (PBS), for the purpose of detecting uric acid (UA) in the presence of ascorbic acid (AA). During modification quercetin was oxidized to the corresponding quinonic structure, and in the blank buffer solution the electrodeposited film exhibits a voltammetric response anticipated for the surface-immobilized quercetin. Retarding effect of the film towards the reaction of anionic species was found; therefore the pH of sample solutions was selected to ensure the analyte in molecular form. At suitable pHs the Qu/WGE shows excellent electrocatalytic effect towards the oxidation of both AA and UA, and separates the voltammetric signal of UA from AA by about 280 mV, allowing simultaneous detection of these two species. A linear relation between the peak current and concentration was obtained for UA in the range of 1-50 μM in the presence of 0.5 mM AA, with a detection limit 1.0 μM (S/N = 3). This sensor was stable, reproducible and outstanding for long-term use.     

1,8-亚乙基萘在三氟化硼乙醚-聚乙二醇中的电化学聚合

在三氟化硼乙醚(BFEE)-聚乙二醇(分子量400,PEG400)混合电解质溶液中,1,8-亚乙基萘直接阳极氧化聚合可以获得自支撑聚(1,8-亚乙基萘)膜.单体在三氟化硼乙醚+10%PEG400中的起始氧化电位为0.95 Vversus SCE,远低于单体在0.1 mol.L-1四氟化硼四丁基胺-乙腈溶液中的起始氧化电位(1.38 VversusSCE).同时PEG400的加入可以有效改善单体在三氟化硼乙醚中的溶解性.UV-Vis,FTIR和1H-NMR确定了1,8-亚乙基萘在4,5位聚合,荧光光谱表明固态及可溶聚(1,8-亚乙基萘)膜是蓝色发光材料.     

Voltametric and Flow Injection Determination of Oxytetracycline Residues in Food Samples Using Carbon Fiber Microelectrodes

A voltammetric method for the determination of the antibiotic oxytetracycline (OTC) in food samples is reported. Carbon fiber microelectrodes (CFMEs), which allow voltammetric measurements to be performed in a small volume (1 mL) of the analyte extract from the samples, are employed. Repeatable electroanalytical responses were obtained with no need of applying cleaning treatments to the CFME. Under the optimized square‐wave conditions, a linear calibration plot for OTC was obtained in the 1.0×10^?6–1.0×10^?4 mol L^?1 range, with a detection limit of 2.9×10^?7 mol L^?1 (150 ng mL^?1) OTC. The determination of OTC by a flow‐injection method with amperometric detection using a homemade flow cell specially designed to work with CFMEs, was also evaluated using pure acetonitrile as the carrier. The SW voltammetric method was applied to the determination of OTC in spiked milk and eggs samples, at 100 ng mL^?1 and 200 ng g^?1 levels, respectively. The procedure involved the extraction of the analyte in ethyl acetate, evaporation of the solvent and reconstitution of the residue in acetonitrile ?5.0×10^?4 mol L^?1 tetrabutylammonium perchlorate medium. Recoveries of 96±8 and 91±8% were obtained for milk and eggs, respectively, by applying the standard additions method.     

Electrochemical Polymerization of 3,4‐Ethylenedioxythiophene from Aqueous Solution Containing Hydroxypropyl‐β‐cyclodextrin and the Electrocatalytic Behavior of Modified Electrode Towards Oxidation of Sulfur Oxoanions and Nitrite

Poly(3,4‐ethylenedioxythiophene) (PEDOT) film was prepared on glassy carbon electrode from 0.1 M LiClO₄ aqueous solution containing 3,4‐ethylenedioxythiophene (EDOT) monomer and hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), by multiple scan cyclic voltammetry. The effect of oxidation potentials on electropolymerization of EDOT was examined by chronoamperometry and cyclic voltammetric techniques. The results of potentiostatic experiments show that optimum potential range to obtain compact stable film was 0.9 to 1.05 V (vs. Ag/AgCl). At higher positive potential, i.e. above 1.05 V, polymer growth was hindered by passivation effect. The PEDOT film exhibited a strong absorption at 550 nm in the UV‐vis region and also a multicolor electrochromism in different buffer solutions (sky blue‐purple red). Cyclic voltammetric features of PEDOT‐coated electrode in pure supporting electrolyte suggested that charge transfer of the film resembles that of surface‐confined redox species. Finally, the electrocatalytic behavior of PEDOT‐modified electrode was tested towards oxidation of sulfur oxoanions and nitrite using cyclic voltammetry.     

Comparison of electrochemical properties of two-component C60-Pd polymers formed under electrochemical conditions and by chemical synthesis

The electrochemical behavior of C₆₀-Pd polymer formed under electrochemical conditions and by the chemical synthesis was examined. In these polymers, fullerene moieties are covalently bonded to palladium atoms to form a polymeric network. Both materials deposited at the electrode surface show electrochemical activity at negative potentials due to the reduction of fullerene cage. Electrochemically formed thin polymeric films exhibit much more reversible voltammetric response in comparison to chemically synthesized polymers. The morphology and electrochemical behavior of chemically synthesized C₆₀-Pd polymer depend on the composition of grown solution. Chemical polymerization results in formation of large, ca. 50 μm, crystallic superficial structures that are composed of regular spherical particles with a diameter of 150 nm. The capacitance properties of C₆₀-Pd films were investigated by cyclic voltammetry and faradaic impedance spectroscopy. Specific capacitance of chemically formed films depends on the conditions of film formation. The best capacitance properties was obtained for films containing 1:3 fullerene to Pd molar ratio. For these films, specific capacitance of 35 Fg^?1 was obtained in acetonitrile containing (n-C₄H₉)₄NClO₄. This value is much lower in comparison to the specific capacitance of electrochemically formed C₆₀-Pd film.     

Anodic synthesis of a conducting polymer deriving from m-methoxytoluene

The electropolymerization of m-methoxytoluene is studied in acetonitrile on a platinum anode. In the voltammetric study, a growing film of polymer is deposited on the electrode when sweeping the potential repetitively about the anodic peak. The modified electrode remains conducting after several cycles. Furthermore, in the chronoamperometric analysis, an oscillating current is observed. In the preparative electrolysis, two types of polymer are obtained, the first is soluble and the second is a deposit, insoluble in most usual solvents. Both give very similar results in IR and NMR spectroscopic analysis, which are in agreement with meta-linked aromatic rings. The polymer is photoluminescent and has maximum emission peaks situated in the near IR region.     

Adding Plasticizer Dispersible Conducting Polymer to the Ion-selective Membrane Composition – Revitalizing Single Piece Ion-selective Electrodes Concept

Typically, ion-selective electrodes used in current triggered electrochemical sensing apply a conducting polymer layer covered with an ion-selective membrane. In this work we propose an ion-selective membrane containing a dispersed conducting polymer. Thus obtained system allows elimination of the Achilles hell of heterogeneous ion-selective membranes containing solid particulates dispersed within the ion-selective polymeric membrane. The herein proposed system, even for high conducting polymer loading equal to 5 % w/w, is characterized with insensitivity towards redox interferences, as well as potentiometric detection limits, selectivity well comparable with that for other ion-selective electrodes constructions. Under voltammetric conditions, with increasing loading of the conducting polymer in the membrane cathodic peak potentials are shifted towards more negative values, yet the linear dependence of the peak potential on logarithm of concentration of the analyte in the solution is preserved.     

Solid Phase Extraction – Voltammetric Coupled Detection of Caffeine in Acetonitrile

Caffeine (CAF) in aqueous solutions was extracted into acetonitrile (MeCN) using solid phase extraction (SPE). The voltammetric detection of CAF in MeCN was performed in a microcentrifuge tube after SPE in order to minimise the required amount of MeCN and reagents used during the analysis. The voltammetric determination of CAF from a range of beverages extracted into MeCN was in good agreement with the results obtained from HPLC measurements on the same samples. The SPE‐coupled voltammetric method gave more accurate results than those obtained via the direct voltammetric detection of CAF in real beverage samples.     

Sensitive and Selective Voltammetric Determination of Ciprofloxacin Using Screen-printed Electrodes Modified with Carbon Black and Magnetic-molecularly Imprinted Polymer

This work reports the construction of screen-printed electrode (SPE) modified with carbon black (CB) and magnetic Fe₃O₄ nanoparticles coated with molecularly imprinted polymer (mag@MIP) based on an alternative low-cost approach. The proposed device was used for the sensitive and selective voltammetric determination of the antibiotic ciprofloxacin. The results obtained from cyclic voltammetry pointed to the improvement of the SPE response toward the irreversible oxidation of ciprofloxacin after the modification of the electrode surface with CB-based film and the magnetic preconcentration of mag@MIP containing adsorbed ciprofloxacin molecules. Compared to the non-molecularly imprinted sensor (mag@NIP), the presence of cavities selective for ciprofloxacin recognition in the mag@MIP nanoparticles accounted for the improvement in analytical signal of the molecularly imprinted sensor. The application of differential pulse voltammetry for ciprofloxacin determination yielded a linear response in the concentration range of 0.5 to 7.0 μmol L⁻¹. The repeatability and interference tests results showed that the proposed electrochemical sensor has good measurement accuracy and selectivity. The proposed device was applied for the voltammetric determination of ciprofloxacin in river water and synthetic urine samples, where recovery rates close to 100 % were recorded for all the samples. The quantification data obtained from the application of the proposed voltammetric method were quite consistent with those of the HPLC reference method.     

Preparation and evaluation of molecularly imprinted polymers based on 9-ethyladenine for the recognition of nucleotide bases in capillary electrochromatography

A molecularly imprinted polymer (MIP) comprising 9-ethyladenine was polymerized in situ inside the capillary for the electrochromatographic separation of nucleotide bases. The capillary wall was first functionalized with 3-trimethoxysilylpropyl methacrylate (10% v/v) and 1,1-diphenyl-2-picrylhydrazyl (0.01% w/v) in toluene. Following this treatment, the capillary was filled with acetonitrile containing 9-ethyladenine, methacrylic acid, ethylene glycol dimethacrylate, and initiator. After polymerization, the MIP was shrunk into a film against the inner wall of the capillary with the syringe pump. The template was then removed with methanol under nitrogen flow. For evaluation the feasibility of the MIP column for the separation of nucleotide bases, some parameters including the pH, concentration of the background electrolyte, the applied voltage as well as the effect of organic modifier were studied. The migration behavior of nucleotide bases on the MIP column was also compared with that on the bare fused-silica column. The results indicated that the MIP columns demonstrated better recognition properties at a pH range of 6-8. The efficiency (plates/m) at pH 8 for the nonimprinted analyte was 75,300 for cytosine, 50,200 for thymine, and 14,800 for guanine. However, the efficiency for the imprinted analyte, adenine, was quite low. This was evidenced by the broad peak, yielding only 2600 plates/m.     

Preparation, structure, and electrochemistry of a polypyrrole film doped with manganese(III)-substituted Dawson-type phosphopolyoxotungstate

The fabrication, structure, electrochemical properties, and electrocatalytic properties of a manganese(III)-substituted Dawson-type phosphopolyoxotungstate, alpha 2-K7P2W17O61(Mn3+.OH2).12H2O (P2W17Mn), entrapped in polypyrrole (PPy) film have been studied. The hybrid film was prepared by potentiostatic polymerization from aqueous solution containing 20 mM pyrrole (Py) and 2 mM P2W17Mn on a pyrolytic graphite (PG) surface. Chronoamperometry, Raman spectroscopy, UV-visible absorption spectroscopy, and cyclic voltammetry were used to monitor and characterize the growth, structure, and properties of the film. The chronoamperometric curve shows that P2W17Mn can catalyze the electrochemical polymerization of Py. The Raman spectrum suggests that the doped P2W17Mn has little effect on the structure of PPy film. The P2W17Mn/PPy film exhibits good voltammetric response in both the acidic aqueous and acetonitrile solutions. At pH 1.0, the molar ratio of pyrrole to P2W17Mn7- in the hybrid film is 21.1:1, quite close to the expected ratio of 21.2:1 for a PPy film with a +0.33 oxidation level per pyrrole moiety and doped with an anion with a charge of 7. The influence of solution pH on P2W17Mn7- in the film is much smaller than that in the aqueous solution. During the potential scanning in 0.1 M LiClO4 acetonitrile solution, P2W17Mn7- was slowly released from the hybrid film and electrolyte ions (Li+ and ClO4-) were inserted into the film. This was identified by cyclic voltammetry and UV-visible spectroscopy. Additionally, the hybrid film can effectively catalyze the reduction of hydrogen peroxide and nitrite.