Synthesis, structure, catalytic transfer hydrogenation and biological activity of cyclometallated ruthenium(III)2-(arylazo)phenolate complexes

A series of mononuclear organoruthenium complexes of the type [RuX(PPh₃)₂(L)] (X = Cl or Br; L = 2-(arylazo)phenolate ligand) have been synthesized from the reaction of five 2-(arylazo)phenol ligands with ruthenium(III) precursors, viz. [RuCl₃(PPh₃)₃] and [RuBr₃(PPh₃)₂(CH₃OH)] in benzene under reflux. In all these reactions, the 2-(arylazo)phenolate ligand replaces one triphenylphosphine molecule, two chlorides or bromides and one methanol from the precursors leading to five-membered cyclometallated species. The 2-(arylazo)phenol ligands behave as dianionic tridentate C, N, O donors and coordinated to ruthenium by dissociation of the phenolic proton and the phenyl proton at the ortho position of the phenyl ring. The compositions of the complexes have been established by elemental analysis, magnetic susceptibility measurement, FT-IR, UV-Vis and EPR spectral data. These complexes are paramagnetic and shows intense d-d and charge transfer transitions in chloroform. The solution EPR spectrum of the complex 7 in dichloromethane at 77 K shows rhombic distortion around the ruthenium ion. The structural conformation of the complex 1 has been carried out by X-ray crystallography. The redox behavior of the complexes has been investigated by cyclic voltammetry and the potentials are observed with respect to the electronic nature of substituents (R) in the 2-(arylazo) phenolate ligands. These complexes catalyze transfer hydrogenation of benzophenone to benzhydrol with up to 99.5% in the presence of i-prOH/KOH. Further, these complexes have shown great promise in inhibiting the growth of both Gram +ve and Gram −ve bacteria, viz. Staphylococcus aureus NCIM 2079 and Escherichia coli NCIM 2065 and fungus Candida albicans NCIM 3102.     

Cobalt-mediated, enantioselective synthesis of C(2) and C(1) dienes

The asymmetric C-H functionalization of norbornene and norbornadiene with five-, six-, and seven-membered cyclic enones mediated by the reactive intermediate [{η(5)-((t)BuMe(2)Si)C(5)H(4)}Co(NO)(2)] is reported. A novel base mixture derived from enantiopure ammonium salts and NaHMDS was used as a source of chirality, and this enantioselective desymmetrization of C(s) alkenes has been applied to the asymmetric synthesis of C(2)- and C(1)-symmetric diene ligands in high regioselectivity (3.7-20:1 anti/syn), near perfect diastereoselectivity (>99:1 dr), and high enantioselectivity (90-96% ee).     

Chemistry of 2-(arylazo)phenolate complexes of ruthenium. Synthesis,structure and reactivities

A group of six ruthenium(III) complexes of type [Ru(acac)(L)₂]where acac=acetylacetonate anion and L=2-(arylazo)-4-methylphenolate anion or 1-(phenylazo)-2-naphtholate anion have been synthesized and characterized Structural characterization of a representative complex where L=1-(phenylazo)-2-naphtholate anionshows that the azophenolate ligands are coordinated as NO-donor ligands forming six-membered chelate rings The complexes are paramagnetic (low-spin d⁵S=1/2) and show rhombic ESR spectra in 1:1 dichloromethane–toluene solution at 77 K In carbon tetrachloride solution these complexes show intense LMCT transitions in the visible region together with weak ligand-field transitions in the near-IR region All the complexes display two cyclic voltammetric responses a ruthenium(III)–ruthenium(IV) oxidation in the range of 083 to 103 V vs SCE and a ruthenium(III)–ruthenium(II) reduction in the range of −024 to −052 V vs SCE Formal potentials of both the couples correlate linearly with the Hammett constant of the para substituent in the arylazo fragment of the 2-(arylazo)-4-methylphenolate ligand The ruthenimn(IV) and ruthenium(II) congeners of the [Ru^III(acac)(L)₂] complexes have been generated by chemical or electrochemical methods and they have been characterized by electronic spectroscopy and cyclic voltammetry.     

Metal triflate catalyzed reactions of alkenes, NBS, nitriles, and TMSN3: synthesis of 1,5-disubstituted tetrazoles

A versatile and highly efficient protocol for the synthesis of 1,5-disubstituted tetrazoles has been developed by metal triflate catalyzed one-pot reaction of alkenes, NBS, nitriles, and TMSN3. Among the metal triflates, Zn(OTf)2 was found to be the best catalyst. Use of different combinations of alkenes and nitriles generate a variety of 1,5-disubstituted tetrazoles containing an additional alpha-bromo functionality of the N1-alkyl substituent.     

Xanthate-mediated synthesis of functional bis(γ-thiolactones)

A new methodology for the synthesis of bis(γ-thiolactones) including two different routes was developed. Both strategies are based on xanthate-mediated synthesis involving free radical addition to an unsaturated compound followed by thermolysis and thiolactonization steps. The first approach is based on the addition of a xanthate to different dienes whereas the second one uses the addition of a bis(xanthate) to various functional alkenes. These two different pathways led to a series of bis(γ-thiolactones) bearing phosphonated, hydroxy, bromide or boronate groups. This shows great promise for broader access to functional bis(γ-thiolactones) which can be envisioned as high potential building blocks for step-growth polymerization.     

Tf2NH-catalyzed,highly regio-and stereo-selective synthesis of trisubstituted alkenes and indane derivatives from benzylic alcohols and alkenes

A reaction of benzylic alcohols with alkenes has been developed in the presence of bis(trifluoromethane)sulfonimide for the synthesis of trisubstituted alkenes and indane derivatives with high stereoselectivity.In general,benzylic alcohols react with 1,1-diaryl alkenes to afford trisubstituted alkenes,and the reaction with 1,2-disubstituted and trisubstituted alkenes affords indane derivatives through a [3 + 2] annulation reaction.     

Novel Carbazole (Cbz)-Based Carboxylated Functional Monomers: Design,Synthesis, and Characterization

A series of novel functional carbazole (Cbz)-based carboxylated monomers were synthesized and characterized. A Clauson-Kaas procedure, a deprotection step, amide coupling, and hydrolysis were utilized as key chemical reactions towards the multistep synthesis of monomers in good to excellent isolated yields. The design strategy was further extended to complex carbazole-COOH monomers incorporated arylazo groups as photoreactive moieties. In addition, photoreactive hybrid carbazole (Cbz)-pyrrole (Pyr)-based carboxylated monomers, comprising a pyrrole core linking a carbazole and a photoreactive phenylazide or benzophenone moiety through an amide spacer in the molecular structure, were also synthesized. The latter can be utilized for surface modification of polymeric films in their monomeric form or as polymeric microparticles (MPs).     

Design, synthesis, and reactivity of 1-hydrazinodienes for use in organic synthesis

A new 1-hydrazinodiene (1) has been developed and utilized in Lewis acid catalyzed, intermolecular Diels-Alder reactions with various electron-deficient alkenes. The hydrazine can then be deprotected, and a molecule of methanesulfinic acid is eliminated to provide a putative diazene intermediate (4), which then spontaneously undergoes a suprafacial 1,5-sigmatropic shift to yield stereochemically complex cyclohexenes. This method has been applied to the synthesis of a constitutionally and stereochemically complex decalin derivative.     

Catalytic transfer hydrogenation of ketones catalyzed by orthometalated ruthenium(III) 2-(arylazo)phenolate complexes containing triphenylarsine

Air-stable, mononuclear orthometalated ruthenium(III) 2-(arylazo)phenolate complexes of the general composition [RuX(AsPh₃)₂(L)] (X = Cl or Br; L = CNO donor of the 2-(arylazo)phenolate ligands) have been synthesized and characterized by IR, UV-vis, and EPR as well as by elemental analysis. One of the complexes [RuBr(AsPh₃)₂(azo-OMe)] was structurally characterized by X-ray analysis and was found to be an efficient catalyst for the transfer hydrogenation of ketones with excellent conversion in the presence of isopropanol at 80 °C in 1 h.     

Reactions of Singlet Oxygen with Organometallic Compounds. 4. Photooxidation of Cationic Iridium(I) and Rhodium(I) Complexes with Weakly Bonded Ligands

Cationic complexes of the type [M(CO)S(PPh(3))(2)](+) (M = Ir, Rh; S = CH(3)CN) react with singlet oxygen to form the corresponding peroxo complexes [M(CO)S(PPh(3))(2)(O(2))](+). The solvent molecule remains coordinated to the metal in the oxygen adducts. The novel cationic iridium-peroxo complex is stable at room temperature, while the rhodium-peroxo complex is only stable below 0 degrees C. Rate constants for physical and chemical interaction of the complexes with singlet oxygen are somewhat smaller than those for related neutral complexes. Upon addition of alkenes (tetramethylethylene or 1-octene) to the peroxo complexes, neither oxidation of the olefins nor substitution of the acetonitrile ligand was observed. 1-Octene was isomerized to give mostly 2- and 3-octene by the cationic rhodium(I) complex. A cationic iridium complex which already possesses a coordinated diene ligand ([Ir(COD)(PPh(3))(2)](+)) did not react with or quench singlet oxygen.     

A regio- and stereoselective synthesis of trisubstituted alkenes via gold(I)-catalyzed hydrophosphoryloxylation of haloalkynes

A new stereoselective synthesis of trisubstituted alkenes is developed. Hydrophosphoryloxylation of haloalkynes provides Z-alkenyl halophosphates, which undergo Pd-catalyzed consecutive cross-coupling reactions to afford regio- and stereodefined trisubstituted alkenes.     

Copper(I) and Silver(I) Complexes of 1-alkyl-2-(methyl)-4-(arylazo)imidazole. Synthesis, Spectral Studies and Electrochemistry

2-(Methyl)-4-(arylazo)imidazole (RLH) (1, 2) are new series of azoimidazoles. Upon treatment of alkylhalide in dry THF in presence of NaH has synthesised 1-alkyl-2-(methyl)-4-(arylazo)imidazole (RLR′) (3, 4). They belong to the azoimine family of N,N′-chelating ligand. They stabilize the Cu(I) oxidation state and we have synthesized [Cu(RLR′)₂](ClO₄) (5, 6). These complexes show a moderately intense visible band (500–600 nm) which has been assigned to 3d(Cu) → π*(ligand) transition. Ag(I) complexes of RLR′ (7, 8) are also very stable under ambient conditions and show weak transitions in the visible region. The Cu(I)-complexes show high potential Cu(II)/Cu(I) redox couple > 0.4 V vs Ag, AgCl/Cl⁻ reference electrode. All these complexes have been structurally characterized by ¹H NMR spectroscopic data.     

Synthesis,spectral characterisation and redox studies of copper(I) and silver(I) complexes of N(1)-benzyl-2–(arylazo)imidazoles

Complexes of general formula [ML2]ClO4 [M=Cu or Ag; L=N(1)-benzyl-2–(arylazo)imidazole] have been prepared and characterised. Spectroscopic data suggest that the complexes are overall tetrahedral with MN4 coordination spheres. Redox studies show a CuI/II couple of ca. 0.5V versus s.c.e. in MeOH. This revised version was published online in June 2006 with corrections to the Cover Date.     

Metal-catalyzed reactions of diborons for synthesis of organoboron compounds

Metal-catalyzed borylation of alkenes, alkynes, arenes, and organic halides with B-B or H-B compounds has been developed for the synthesis of organoboron compounds from simple organic substrates. The platinum(0)-catalyzed addition of bis(pinacolato)diboron to alkenes and alkynes provided a method for the stereoselective synthesis of cis-bis(boryl)alkanes or cis-bis(boryl)alkenes. The addition of diboron to 1,3-dienes with platinum(0) complexes provided a new access to cis-1,4-bis(boryl)-2-butene derivatives, which are versatile reagents for diastereoselective allylboration of carbonyl compounds. The first one-step procedure for the syntheses of aryl-, vinyl-, and allylboronates was achieved via crosscoupling reactions of diborons with aryl and 1-alkenyl halides or triflates and allyl acetates. Direct C-H borylation of arenes catalyzed by a transition metal complex was studied as an economical protocol for the synthesis of a variety of arylboron derivatives. Ir-catalyzed C-H borylation of arenes, heteroarenes, and benzylic positions of alkylarenes by bis(pinacolato)diboron or pinacolborane furnished aryl-, heteroaryl-, and benzylboron compounds. This article discusses the mechanisms of these reactions and their synthetic applications.     

Catalytic, enantioselective alkylation of alpha-imino esters: the synthesis of nonnatural alpha-amino acid derivatives.

Methodology for the practical synthesis of nonnatural amino acids has been developed through the catalytic, asymmetric alkylation of alpha-imino esters and N,O-acetals by enol silanes, ketene acetals, alkenes, and allylsilanes using chiral transition metal-phosphine complexes as catalysts (1-5 mol %). The alkylation products, which are prepared with high enantioselectivity (up to 99% ee) and diastereoselectivity (up to 25:1/anti:syn), are protected nonnatural amino acids that represent potential precursors to natural products and pharmaceuticals. A kinetic analysis of the catalyzed reaction of alkenes with alpha-imino esters is presented to shed light on the mechanism of this reaction.     

Synthesis and structural characterization of palladium(II) 2-(arylazo)naphtholate complexes and their catalytic activity in Suzuki and Sonogashira coupling reactions

Abstract

A family of five palladium(II) 2-(arylazo)naphtholate complexes, [PdCl(PPh₃)(L)] (L?=?O, N-donor of bidentate 2-(arylazo)naphtholate ligands), have been synthesized and characterized by elemental analysis and spectral (FT-IR, UV–Vis, ¹H-NMR and ¹³C-NMR) methods. Further, the catalytic efficiency of all the complexes have been investigated for Suzuki and Sonogashira coupling reaction of various aryl halides.     

Reactions of 2-(arylazo) aniline with RhCl3: synthesis and structure of new cyclometalated complexes of Rh(III) and recognition of RhCl3 assisted azo (-N=N-) cleavage

The reactions of 2-(arylazo) anilines, HL (1) [where HL is 2-(ArN=N)C6H4NH2; Ar is C6H5 (for HL1, 1a) and p-MeC6H4 (for HL2, 1b); H of HL represents the proton of Ar which gets dissociated upon orthometalation] with RhCl3 in methanol afforded new orthometalated complexes of composition (L)(HL)Rh(III)Cl2 (2) and (L)(ArNH2)Rh(III)Cl2 (3). The anionic L- binds the metal in tridentate (C, N, N) manner in both the complexes, while HL and ArNH2 bind the metal of 2 and 3 in monodentate fashion through the amino nitrogen. The ArNH2 of 3 was formed in situ due to cleavage of azo (-N=N-) function of monodentate HL of 2. The scission of N=N has been authenticated.     

Total synthesis of (S)-(+)-curcudiol, and (S)-(+)- and (R)-(-)-curcuphenol.

A highly enantioselective synthesis of the versatile chiral synthons possessing one stereogenic center, (S)- and (R)-4-aryl-5-hydroxy-(2E)-pentenoate (3) was achieved based on the enzymatic reaction of (+/-)-3 with commercially available lipases MY-30 or OF-360 from Candida rugosa. Application of (S)-3 and (R)-3 to the total syntheses of(S)-curcuphenol (1), (S)-curcudiol (2), and (R)-curcuphenol (1), respectively, is described.     

TBAF-mediated reactions of 1,1-dibromo-1-alkenes with thiols and amines and regioselective synthesis of 1,2-heterodisubstituted alkenes

An efficient synthesis of trisubstituted alkenes including 1,2-heterodisubstituted alkenes has been described. Reactions of thiols and amines with 1,1-dibromo-1-alkenes in the presence of TBAF·3H(2)O afford (Z)-2-bromovinyl sulfides and (Z)-2-bromovinyl amines regio- and stereoselectively. The reaction proceeds under catalyst-free conditions with high efficiency. The coupling reactions of the obtained products bearing bromine atoms with phenylacetylene and phenylboronic acid gave trisubstituted alkenes in good to excellent yields. Cross-coupling with various N, O, S, and P nucleophiles selectively generated 1,2-N,O, 1,2-N,S, 1,2-S,P, 1,2-S,S, and 1,2-S,O heterodisubstituted alkenes.     

Platinum(II)-bis-(N-heterocyclic carbene) complexes: synthesis, structure and catalytic activity in the hydrosilylation of alkenes

Chelating biscarbene ligands increase the stability of metal-organic catalyst systems. The catalytic activities of seven structurally different platinum(II)-bis-NHC-complexes in the hydrosilylation of alkenes have been investigated and compared with the catalytic activity of the Karstedt catalyst and of a highly active platinum(0)-NHC-complex. It is shown that a fine-tuning of the catalytic activity of the platinum(II)-bis-NHC-complexes is possible. The synthesis of a platinum(II)-bis-NHC-complex with similar activity, but additional advantages compared to the Karstedt catalyst, is reported. The solid state structure of 1,1-[Bis(3,3′-(4-methoxyphenyl)-1,1′-1H-imidazolium-2,2′-ylidene)methanediyl]platinum(II)-dichloride is presented.