Adhesive effect of low-density polyethylene gels on polyethylene moldings

Adhesive effect of low density polyethylene (LDPE) gels in organic solvents such as decalin, tetralin, ando-dichlorobenzene on high density polyethylene (HDPE) moldings has been investigated by shearing tests, electron microscopy, and DSC measurements. When heated at 110°C for 2 h, all of the gels showed strong adhesive strengths around 30 kg/cm², which is sufficiently strong for practical uses. It has been found that the adhesive strength increases with the heating temperature and that the temperature at which the heated gel begins to exhibit the adhesive effect depends upon solvents and is about 30° lower than that of the HDPE gels.     

Adhesive effect of linear low-density polyethylene gels on polyethylene moldings

Adhesive effect of linear low density polyethylene (LLDPE) gels in organic solvents such as decalin, tetralin, and o-dichlorobenzene on high density polyethylene (HDPE) moldings has been investigated by shearing tests, and DSC measurements. For all of the gels the temperature at which the heated gel starts to exhibit the adhesive effect was about 70 °C, which is similar to the result of LDPE gel. In particular, when heated at 110 °C, LLDPE gel in tetralin showed such a strong bond strength that polyethylene plates of 3 mm in thickness and 20 mm in width gave rise to necking. It was found that LLDPE gel behaved as though it added LDPE gel to HDPE gel namely LDPE-like components in LLDPE resin exerted the adhesive effect at lower heating temperature, HDPE-like components exerted the strong adhesive effect at higher heating temperature.     

The colloid-structure of semicrystalline low-density polyethylene

The length-distribution of stereoregular sequences in low-density polyethylene (LDPE) is determined by a computer-aided analysis of cp-melting curves within the framework of thermodynamics of eutectoid copolymers. Small-angle x-ray scattering patterns are then described by using the structure data derived. One of the results is that fluctuations of the mean electron-density are increasingly reduced with an increasing degree of crystallinity.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday     

Investigation of antioxidant and electron beam radiation effects on the thermal oxidation stability of low-density polyethylene

Effect of various antioxidants on the thermal oxidation stability of LDPE and X-LDPE has been investigated. To achieve this purpose, miscellaneous commercial grade antioxidants such as Irganox 1010, Irganox1076, Irgafos168, Irganox B225, and Chimassorb 944 were selected. Then, formulations based on different content of antioxidant were prepared. The samples were crosslinked by exposure to electron beam irradiation. To assess the thermal oxidation stability of samples, oxidation induction time (OIT) test was accomplished on both the irradiated and unirradiated specimens. Ageing tests were carried out in order to evaluate the thermal oxidation stability of irradiated X-LDPE. The results indicate that Irganox 1010 is the most effective antioxidant amongst the selected ones, concerning thermal oxidation stability of LDPE, before and after aging test.     

Memory effect of low-density polyethylene crystallized in a stepwise manner

Stepwise crystallization and successive melting of Tipolen low density polyethylene was studied by DSC. As a result of the stepwise crystallization of the polyethylene, there were as many peaks on the melting curve as the number of steps used for the crystallization of the sample. Similar results were obtained on Tipolen low-density polyethylene fractionated by gel permeation chromatography, and on Celene low-density polyethylene, too.

---

Zusammenfassung Die stufenweise Kristallisierung und das graduelle Schmelzen des Polyäthylens geringer Dichte Tipolen wurden mittels DSC studiert. Als Ergebnis der stufenweisen Kristallisierung des Polyäthylens befanden sich so viele Peaks in der Schmelzkurve wie die Zahl der zur Kristallisierung der Probe angewandten Stufen. Ähnliche Ergebnisse wurden bei der Fraktionierung des Polyäthylens geringer Dichte Tipolen mittels Gelpermeationschromatographie, sowie im Falle des Polyäthylens geringer Dichte Celene erhalten.

---

Résumé On a étudié, par analyse enthalpique différentielle (DSC) la cristallisation graduelle et la fusion successive du polyéthylène à faible densité Tipolen. La cristallisation graduelle du polyéthylène fournit autant de pics sur la courbe de fusion qu'il n'y en avait d'étapes lors de la cristallisation de l'échantillon. On a obtenu de résultats similaires en effectuant la fractionation, par chromatographie à perméation de gel, du polyéthylène à faible densité Tipolen et aussi en étudiant le polyéthylène Celene, également à faible densité.

---

. , , . - , - , - .

     

Radiation chemistry of linear low-density polyethylene. I. Gel formation and unsaturation effects

Quenched and annealed samples of linear low-density polyethylene (LLDPE) were irradiated with ⁶⁰Co γ rays in vacuo at room temperature. The data follow rather accurately Charlesby's equation s = k/r, where s is the soluble fraction, r the dose, and k a constant from which G(X), the G-value for crosslinks, was calculated. Crosslinking in the LLDPE is about twice as extensive at equal doses as in LHDPE. Production of vinylene unsaturation was approximately the same in the two types of polyethylene.     

The effect of flame retardant-modified sepiolite nanofibers on thermal degradation and fire retardancy of low-density polyethylene

Flame retardant-modified sepiolite nanofiber (PSPHD-SEP) was fabricated through chemical grafting by introducing intumescent flame retardant oligomer (PSPHD) onto the surface of sepiolite fiber. Various sepiolite/low-density polyethylene (SEP/LDPE) composites have been prepared successfully via melt blending. The dispersion of various SEPs in LDPE matrix was observed by scanning electron microscope and transmission electron microscope. The thermal degradation behaviors of various SEP/LDPE composites with 3 mass% acid-modified sepiolite fiber (a-SEP) or PSPHD-SEP have been investigated employing thermogravimetric analysis/derivative thermogravimetry. The thermal degradation kinetics of neat LDPE, a-SEP/LDPE and PSPHD-SEP/LDPE systems was comparatively analyzed by means of Friedman and Flynn–Wall–Ozawa methods to further comprehend the effect of a-SEP and PSPHD-SEP on the thermal stability of LDPE. Due to the addition of PSPHD-SEP, the limiting oxygen index value of PSPHD-SEP/LDPE composite can reach 21.3%, and the UL-94V-2 rating is obtained. The cone calorimetry (CONE) tests showed that a reduced peak heat release rate can be achieved for PSPHD-SEP/LDPE composite accompanying with gas-phase fire retardant action.

     

The effect of monomer molecular weight of acrylate on radiation grafting of polyethylene

A series of condensed ethylene glycol acrylate monomers with differentmolecular weight was grafted to polyethylene films by means of pre-irradiation.The effect of the molecular weight of monomer and co-solvent system on thegrafting reaction and the properties of the grafted sample were studied. Theexperimental results showed that the initial rate of grafting reaction decreasedand the molar degrees of grafting linearly decreased with the increment ofmolecular weight of the monomer. The grafting degree was increased with theswelling degree of the grafted film. The biocompatibility and blood compatibilityof the grafted PE films were evaluated by the determination of hydrophilicityand anti-thrombus.     

Characterization and properties of polyethylene blends II. Linear low-density with conventional low-density polyethylene

Melting and crystallization phenomena in blends of a linear low-density polyethylene (LLDPE) (ethylene butene-1 copolymer) with a conventional low-density (branched) polyethylene (LDPE) are explored with emphasis on composition by differential scanning calorimetry (DSC) and light scattering (LS). Two endotherms are evident in the DSC studies of the blends, which suggests the formation of separate crystals. Light-scattering studies indicate that the blend system is predominantly volume filled by the LLDPE component whereby the LDPE component crystallizes as a secondary process within the domain of the LLDPE spherulites. In contrast to those of the LLDPE/HDPE blends, the mechanical and optical relaxation behavior of the LLDPE/LDPE blends are dominated by the LLDPE component in the vicinities of γ and β regions, whereas the trend reverses at high temperature α regions. This observation is accounted for on the basis of the relative restrictions imposed by the deformation of spherulites (which are primarily made up of the LLDPE component) at different time scales.     

The elongation and time dependence of the crystallinity of low-density polyethylene

It has been presumed in studies of the orientation of low-density polyethylene and its time dependence that the degree of crystallinity remained constant with elongation and did not vary with time following elongation. This paper represents a test of this hypothesis by several methods. The change in crystallinity accompanying stretching has been followed by a modification of an x-ray method for uniaxial orientation proposed by Ruland in which diffraction peaks are resolved into crystalline and amorphous components and their respective areas are determined by two-dimensional integration over both the Bragg angle and the azimuthal angle of diffraction. The weight-fraction crystallinity is then determined from the ratio of the weighted crystalline area to the total area. There appears to be no significant variation in crystallinity up to 50% sample elongation for both slowly and rapidly stretched samples at room temperature. The dynamic crystallinity change accompanying small amplitude vibration has also been determined by the dynamic x-ray diffraction technique and found to be negligible over a wide range of frequency. The degree of crystallinity has also been evaluated from the absolute infrared absorbance of crystallinity-sensitive bands and has also been found to be independent of elongation at room temperature up to 80% elongation. Changes have also been observed by this method during relaxation at constant length following rapid extension and have also been found to be negligible. These results also indicate negligible changes in rotational isomer population. Consequently, we conclude that changes observed during relaxation and vibration arise from orientational changes rather than changes in the degree of crystallinity.     

Characterizing blends of linear low-density and low-density polyethylene by DSC

Summary A two-step isothermal annealing (TSIA) procedure is described that enables the endothermic peaks of low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE) and their blends, to be satisfactorily resolved during analysis by differential scanning calorimetry. A modified form of multistep isothermal annealing, the TSIA procedure produces a highly characteristic profile of the blend components by facilitating the segregation of the phases based on branch density. It is proposed that the TSIA procedure may have significant merit in the identification and quantification of the components in an unknown blend as well as increasing the sensitivity in analytical procedures aimed at blend component quantification.     

Radiation chemistry of linear low-density polyethylene. II. Kinetics of alkyl and allyl free-radical decay reactions

Quenched and annealed samples of linear low-density polyethylene (LLDPE) were γ irradiated in vacuo at 77 K; the kinetics of the alkyl free-radical decay reactions were studied at room temperature, and of the allyl free-radical reactions at 60, 70, and 80°C. The ESR signals saturate at a slightly higher microwave power in the LLDPE than in high-density polyethylene (HDPE), and the alkyl radicals start decaying at a lower temperature in the LLDPE than in the HDPE. As in the HDPE the decay of the alkyl free radicals at room temperature in the LLDPE follows the kinetic equation for two simultaneous first-order reactions with the fraction of the faster-decaying component being slightly greater in the quenched than in the annealed samples. In the case of the allyl free radicals the decay at 60°C follows the equation based on one fraction of the radicals decaying according to second-order kinetics in the presence of other nondecaying radicals. At higher temperatures the data are best understood in terms of a second-order rate equation with a continuously variable time-dependent rate constant as suggested by Hamill and Funabashi.     

Gamma-oxidation of linear low-density polyethylene: The dose–rate effect of irradiation on chemical and physical modifications

γ-Oxidation of linear low-density polyethylene based on hexene and butene was investigated. Irradiation was performed at different dose rates in air (from 2 rad/s to 100 rad/s). Degraded samples were analyzed with IR combined with NO and SF₄ derivatizations. Our results showed that the lower the dose rate, the higher the degree of oxidation in terms of γ-product formation. Ketone species appeared to be the dominant γ-products. The G values of γ-product formation were very dependent on the dose rate of initiation. Comparison of the G value ratio of different γ-products revealed stoechiometry differences. The complex appearance and disappearance of unsaturations was tentatively explained. The modifications of elongation at break induced by γ-irradiation were monitored by molecular changes in weight. This was not conclusive because changes in elongation at break are inconsistent with changes in M_w/M_n. © 1995 John Wiley & Sons, Inc.     

Adhesion of linear low-density polyethylene and oligomers

A pressure vessel design is put forward taking the form of a two-layer bottle, the inner sealing layer of which is made of linear low density polyethylene by rotational molding and the external power layer of which is made by winding an oligomer impregnated roving or moldable filament on the inner layer. It is shown that, to achieve the highest adhesion strength, it is necessary to preliminarily prepare the surface of the polyethylene sample by obtaining a particular microstructure and to use epoxy or polyester oligomers with a viscosity low enough to provide complete filling of the polyethylene sample surface texture.     

Multi-component analysis of low-density polyethylene oxidative degradation

The oxidative degradation of polyethylene in various conditions has been studied. In order to gain insight into the oxidation process, a method for the curve-fitting analysis of the IR carbonyl band between 1800 cm⁻¹ and 1600 cm⁻¹ in oxidized low-density polyethylene (LDPE) has been developed. Up to 10 components were needed to fit the band envelope, whose assignments and peak positions were based on the literature and on the synthesis of an appropriate model compound. The determination of the other band parameters, such as peak width and peak shape, necessary for reliable best fitting of the absorbance envelopes, was obtained by overall fitting optimization process. By using the available extinction coefficients, the quantitative determinations of the main oxidized species, i.e. ketones, carboxylic acids, esters, γ-lactones and ketoacids, were obtained with a reasonable confidence by rigorous parameter setting. The method was applied to the IR analysis of LDPE samples oxidized in different conditions (under thermal and irradiation stimulation), either as beads or films, as a function of time. Total hydroperoxide concentrations were also quantitatively estimated by a modified iodometric titration procedure. A good linear correlation between concentrations estimated by chemical titration and by intensity analysis of the free hydroperoxide IR band was observed.     

Characterization and properties of polyethylene blends I. Linear low-density polyethylene with high-density polyethylene

A blend system of linear low-density polyethylene (LLDPE) (ethylene butene-1 copolymer) with high-density (linear) polyethylene (HDPE) is investigated by differential scanning calorimetry (DSC), wide-angle x-ray diffraction (WAXD), small-angle x-ray scattering (SAXS), Raman longitudinal-acoustic-mode spectroscopy (LAM), and light scattering (LS). For slowly cooled or quenched samples, one single endotherm is evident in the DSC curve which depends on the composition. No separate peaks are observed in the WAXD, SAXS, Raman-LAM, and LS studies on the LLDPE/HDPE blends. This observation along with the fact that no peak broadening is observed suggests that these peaks are associated with the presence of a single component. In no case did we see double peaks or a broadened peak that might be associated with two closely spaced unresolved peaks. This suggests that segregation has not taken place at the structural levels of crystalline, lamellar, and spherulitic textures. A single-step drop in the scattered intensity (I_Hv) as a function of temperature is seen in the LS studies. It is therefore concluded that cocrystallization between the LLDPE and HDPE components occurs. The mechanical and optical α, β, and γ relaxations of these blends are explored by dynamic birefringence. The 50/50 blend displays the intermediate relaxation behavior between those of the components in all α, β, and γ regions. This observation is reminiscent of the characteristic of the typical miscible blends.     

Quantitative analysis of the temperature effect on the radiation crosslinking and scission of polyethylene macromolecules

The γ-radiation-induced crosslinking of low-density polyethylene over a wide temperature range was studied with a new log–logarithmic scale method for sol–gel analysis. A straight line was always obtained for the plotting of log (sol fraction) against log (dose). Gel points were accurately obtained from the plot intersects, and scission/crosslinking ratios were obtained from the plot slopes via computer simulations with GelSim6 software. The crosslinking and scission yields were determined to be 0.17 and 0.078 mmol/kJ, respectively, at 30 °C, and they increased to 2.3 and 4.4 mmol/kJ, respectively, at 300 °C. The observed regularities are explained by the fact that enhanced macromolecular motion decreases the cage effect on recombination reactions in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1656–1661, 2001     

ESR study on radical conversions in irradiated low-density polyethylene

ESR studies were carried out on radical conversions by thermal and photochemical mechanisms in low-density polyethylene irradiated mainly with electron beams at ?196°C both in vacuum and in the presence of CO. According to the spectral change, the following radical conversions were elucidated for the samples irradiated in vacuo [eqs. (1) and (1′)] and in the presence of CO [eqs. (2) and (2′)]. From the resemblance of the ESR spectrum observed after direct photolysis of polyethylene to that observed after photo-induced radical conversions of the allylic radicals, it is concluded that an eight-line ESR spectrum observed immediately after photolysis of polyethylene at ?196°C could be attributed more reasonably to the alkyl radicals ? CH₂CHCH₃ than to ? CH₂CH₂ and ? CH₂CHCH₂? .     

The role of stable free radicals in the radiation-induced conductivity of low-density polyethylene

The radiation-induced conductivity (RIC) of low-density polyethylene (LDPE) under continuous irradiation with fast electrons (50 keV) was experimentally studied. The dose dependence of the concentration of stable paramagnetic centers was determined. The kinetics of RIC in LDPE was calculated on the basis of the Rose-Fowler-Vaisberg (RFV) model taking into account the buildup of radiation-induced traps. Good correlation between the experimental results and calculated data was found.