Microstructure analysis and thermal property of copolymers made of glycolide and ϵ‐caprolactone by stannous octoate

Glycolide (GL) and ?‐caprolactone (CL) were copolymerized in bulk at relatively high temperatures using stannous octoate as a catalyst. To investigate the relationship among microstructure, thermal properties, and crystallinity, three series of copolymers prepared at various reaction temperatures, times, and comonomer feed ratios were prepared and characterized by ¹H and ¹³C NMR, DSC, and wide‐angle X‐ray diffraction (WAXD). The 600‐MHz ¹H NMR spectra provided information about not only the copolymer compositions but also about the chain microstructure. The reactivity ratios (r_G and r_C) were calculated from the monomer sequences and were 6.84 and 0.13, respectively. In terms of overall feed compositions, the sequence lengths of the glycolyl units calculated from the reactivity ratios exceeded those measured from the polymeric products. Mechanistic considerations based on reactivity ratios, monomer consumption data, and average sequence lengths are discussed. The unusual phase diagram of GL/CL copolymers implies that the copolymer melting temperature does not depend on its composition alone but rather on the nature of the sequence distribution. The DSC and WAXD measurements show a close relationship between polymer crystallinity and the nature of the polymer sequence. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 544–554, 2002; DOI 10.1002/pola.10123     

Determination of microstructure and glass-transition temperature of acrylonitrile-methyl acrylate copolymers by 13C-NMR spectroscopy

Acrylonitrile-methyl acrylate (A/M) copolymers of different monomer compositions were prepared by bulk polymerization using free radical initiator (benzoyl peroxide). Copolymer compositions were determined by elemental analyses and comonomer reactivity ratios were determined by the nonlinear least squares errors-in-variables methods (EVM). Terminal and penultimate reactivity ratios have been calculated using the observed monomer triad sequence distribution determined from ¹³C{¹H}-NMR spectra. The triad sequence distribution was used to calculate diad concentrations, conditional probability parameters, number-average sequence lengths, and run number in the copolymers. The observed triad sequence concentrations determined from ¹³C{¹H}-NMR spectrum agreed well with those calculated from reactivity ratios. Glass transition temperatures (T_g) of various copolymers determined from DSC gave good agreement with those obtained from NMR. © 1992 John Wiley & Sons, Inc.     

Sequencing of trans-4-methacryloyloxyazobenzene/vinylidene chloride copolymers by one- and two-dimensional NMR spectroscopy

Trans-4-methacryloyloxyazobenzene/Vinylidene Chloride (M/V) copolymers of different monomer concentrations were prepared by solution polymerization using benzoyl peroxide as an initiator. The copolymer composition was determined from the ¹³C{¹H}-NMR spectrum. The quaternary carbon of M- and V-centered resonances were used for determining the sequences in terms of the distribution of M- and V-centered triads. The sequence distribution of M- and V-centered triads determined from ¹³C{¹H}-NMR spectra of the copolymer is in good agreement with the triad concentration calculated from the statistical model. The comonomer reactivity ratios, determined by both the Kelen Tudos (KT) and the nonlinear error in variables (EVM) methods are r_M = 3.59 ± 0.19, r_V = 0.89 ± 0.07; r_M = 3.76, and r_V = 0.93, respectively. ¹³C Distortionless Enhancement by Polarization Transfer (DEPT) spectrum was used to differentiate between the resonance signals of M- and V-methylene and methyl carbon units. Assignments to the methylene resonance signals have been assigned up to the tetrad levels using 2D HSQC experiments. The geminal couplings in the methylene proton region is shown in the 2D DQF-COSY spectrum. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3179–3185, 1999     

The influence of molecular weight on the reactivity of a vinylbenzyl ether macromonomer of poly(2,6-dimethyl-1,4-phenylene oxide)

The synthesis of a series of vinylbenzyl ether macromonomers of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO–VBE) with number average molecular weights between 1,000 and 27,000 and narrow molecular weight distribution is presented. The reactivity ratio r₁ was determined for the comonomer pairs methyl methacrylate (MMA) and butyl methacrylate (BMA), respectively (M₁), and PPO–VBE (M₂) over the entire range of molecular weights of the macromonomer. r₁ was determined by the single experiment intergrated equation. Since both the monomer and macromonomer present an induction period, it has been shown that the determination of r₁ from one single point experiment is not correct. Accurate r₁ values can be obtained from one single copolymerization experiment only when the comonomer conversions are determined at several different reaction times. The macromonomer reactivity (1/r₁) increases with its molecular weight up to about 5,000–7,000. Above these values its reactivity decreases. An attempt to explain this behavior based on the kinetic excluded free volume effect is presented.     

Influence of the reaction medium on the composition and the microstructure of styrene–acrylic acid copolymers

Two series of acrylic acid-styrene copolymers of various composition have been prepared in benzene and dimethylformamide in order to study their sequence distribution by using ¹³C NMR spectroscopy. The reactivity ratios in benzene were r_A = 0.13, r_A = 0.30 and in dimethylformamide r_A = 0.05, r_S = 1.60. Copolymers with the same overall composition but prepared in different media display marked differences in sequence distribution, the copolymers obtained in dimethylformamide always having longer sequences. For the series of copolymers prepared in dimethylformamide, the experimental percentages of acrylic acid-centered triads (SAS, SAA, AAA) disagree with the values calculated from the monomer reactivity ratios.     

Synthesis of styrene/methyl methacrylate copolymers by atom transfer radical polymerization: 2D NMR investigations

Copolymers of styrene and methyl methacrylate were synthesized by atom transfer radical polymerization using methyl 2‐bromopropionate as initiator and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as catalyst. Molecular weight distributions were determined by gel permeation chromatography. The composition of the copolymer was determined by ¹H NMR. The comonomer reactivity ratios, determined by both Kelen–Tudos and nonlinear error‐in‐variables methods, were r_S = 0.64 ± 0.08, r_M = 0.63 ± 0.08 and r_S = 0.66, r_M = 0.65, respectively. The α‐methyl and carbonyl carbon resonances were found to be compositionally and configurationally sensitive. Complete spectral assignments of the ¹H and ¹³C NMR spectra of the copolymers were done by distortionless enhancement by polarization transfer and two‐dimensional NMR techniques such as heteronuclear single quantum coherence and heteronuclear multiple quantum coherence. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2076–2085, 2006     

Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894     

Copolymer Microstructure by High-Resolution NMR Studies

The monomer and configurational sequences of several radical copolymers between substituted styrenes and acrylates have been examined by analyzing the high-resolution NMR spectra with the previously reported treatment of the styrene-methyl methacrylate system. The analyses have led to the conclusion that the monomer sequence distribution is just as expected from the usual copolymerization theory with r ₁ and r ₂.     

Synthesis and enzymatic degradation of 2‐methylene‐1,3‐dioxepane and methyl acrylate copolymers

Copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and methyl acrylate (MA) containing ester units both in the backbone and as pendant groups were synthesized by free‐radical copolymerization. The influence of reaction conditions such as the polymerization time, temperature, initiator concentration, and comonomer feed ratio on the yield, molecular weight, and copolymer composition was investigated. The structure of the copolymers was confirmed by ¹H NMR, ¹³C NMR, and IR spectroscopy. Differential scanning calorimetry indicated that the copolymers had a random structure. An NMR study showed that hydrogen transfer occurred during the copolymerization. The reactivity ratios of the comonomers were r_MDO = 0.0235 and r_MA = 26.535. The enzymatic degradation of the copolymers obtained was carried out in the presence of proteinase K or a crude enzyme extracted from earthworms. The experimental results showed that the higher ester molar percentage in the backbone caused a faster degradation rate. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2898–2904, 2003     

Nitroxide‐mediated radical copolymerization of methyl methacrylate controlled with a minimal amount of 9‐(4‐vinylbenzyl)‐9H‐carbazole

The controlled nitroxide‐mediated homopolymerization of 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) and the copolymerization of methyl methacrylate (MMA) with varying amounts of VBK were accomplished by using 10 mol % {tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino} nitroxide relative to 2‐({tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino}oxy)‐2‐methylpropionic acid (BlocBuilder?) in dimethylformamide at temperatures from 80 to 125 °C. As little as 1 mol % of VBK in the feed was required to obtain a controlled copolymerization of an MMA/VBK mixture, resulting in a linear increase in molecular weight versus conversion with a narrow molecular weight distribution (M_w /M_n ≈ 1.3). Preferential incorporation of VBK into the copolymer was indicated by the MMA/VBK reactivity ratios determined: r_VBK = 2.7 ± 1.5 and r_MMA = 0.24 ± 0.14. The copolymers were found significantly “living” by performing subsequent chain extensions with a fresh batch of VBK and by ³¹P NMR spectroscopy analysis. VBK was found to be an effective controlling comonomer for NMP of MMA, and such low levels of VBK comonomer ensured transparency in the final copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

On the kinetics and mechanism of copolymerization of vinyl acetate and itaconic monomers

The introduction of anionic hydrophylic groups in the pendant chain of polyvinyl alcohol improves its surface and adhesive properties. For the purpose of synthesizing raw materials for preparation of modified polyvinyl alcohol with enhanced performance characteristics, the copolymerization of vinyl acetate with itaconic acid and diethyl itaconate at concentrations up to 9 mol % in methanol solution using azo-bis-isobutyronitrile and tert-butylcyclohexylperoxydicarbonate as initiators has been studied. The experiments were performed using two different methods of addition of the itaconic monomer—single, at the beginning of the process, and continuous. It was established that the process rate decreases as the quantity of the second comonomer increases. The reaction order in terms of itaconic acid ( ?2, 95) and reactivity ratios for both pairs vinyl acetate and itacinic acid (r₁ = 0.053 and r₂ = 31) and vinyl acetate and diethyl itaconate (r₁ = 0.125 and r₂ = 18) were determined. The products obtained were characterized by IR and NMR. It was confirmed that for the case of single addition at the beginning of the process a two-phase system is formed while the continuous addition resulted in random group distribution.     

Microstructure of glycidylmethacrylate/vinyl acetate copolymers by two‐dimensional nuclear magnetic resonance spectroscopy

Glycidylmethacrylate/vinyl acetate copolymers were prepared by solution polymerization with benzene as a solvent and benzoyl peroxide as an initiator. Copolymer compositions were determined from ¹H NMR spectra, and comonomer reactivity ratios were determined by the Kelen–Tudos (KT) method and the nonlinear least‐squares error‐in‐variable method (EVM). The reactivity ratios obtained from KT and EVM were r_G = 37.4 ± 12.0 and r_V = 0.036 ± 0.019 and r_G = 35.2 and r_V = 0.03, respectively. Complete spectral assignments of ¹³C and ¹H NMR spectra were done with the help of distortionless enhancement by polarization transfer and two‐dimensional ¹³C–¹H heteronuclear single quantum coherence and total correlation spectroscopy. The methyl, methine, and methylene carbon resonance showed both stereochemical and compositional sensitivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4051–4060, 2001     

Synthesis and properties of polyethylene with side‐chain triphenylamines as hole‐transporting materials

The copolymerization of ethylene with triphenylamine (TPA)‐containing α‐olefin monomer 1 using a rac‐Et(Ind)₂ZrCl₂ ( EBIZr )/MAO catalytic system was investigated to prepare polyethylene with pendent TPA groups. Despite the presence of a large excess of TPA moieties, the polymerization reactions efficiently produce copolymers of high‐molecular‐weight with the comonomer incorporation up to 6.1 mol % upon varying the comonomer concentration in the feed. Inspection of the aliphatic region of the ¹³C‐NMR spectrum and the estimated copolymerization parameters (r ₁ ≈ 0 for 1 and r_E ≈ 43 for ethylene) reveal the presence of isolated comonomer units in the polymer chain. While UV–vis absorption measurements of the copolymers show an invariant absorption feature, PL spectra exhibit a slightly red‐shifted emission with increasing content of 1 in the polymer chain. All the copolymers show high thermal stability (T_d5 > 436 °C), and the electrochemical stability toward oxidation is also observed. Particularly, the copolymer displays hole‐transporting ability for the stable green emission of Alq₃ when incorporated into the hole‐transporting layer of an electroluminescence device. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5816–5825, 2008     

Photochromism of 4-acryloxyazobenzene/(−)-menthyl acrylate copolymers

Copolymers of trans-4-acryloxyazobenzene ( AAB ) with (?)-menthyl acrylate ( MtA ) have been prepared by free radical initiation; comonomer reactivity ratios have been found to be r _AAB = 0.89 and r _MtA = 0.53. Dependence of chiroptical properties on copolymer composition has been investigated and contribution to circular dichroism by azobenzene chromophores of isolated and sequence AAB units, as well as the influence of the trans to cis photoisomerization, have been determined. Kinetics of photoinduced trans → cis and thermally induced cis → trans isomerization of azobenzene side chains have also been examined and the kinetic parameters evaluated with relation to copolymer structure. The results have been discussed in terms of light-induced secondary structure reversible modifications.     

Ethylene/1-hexene copolymerizations by syndioselective metallocenes: Direct comparison of Me2C(Cp)(Flu)ZrMe2 with Et(Cp)(Flu)ZrMe2

Copolymerizations of ethylene with 1-hexene have been carried out by using two metallocenes: highly syndiospecific isopropylidene(1-η⁵-cyclopentadienyl)(1-η⁵-fluorenyl)-dimethylzirconium (Me₂C(Flu)(Cp)ZrMe₂, 1) and less syndiospecific (1-fluorenyl-2-cyclopentadienylethane)-dimethylzirconium (Et(Flu)(Cp)ZrMe₂, 2), in the presence of [Ph₃C][B(C₆F₅)₄] as a cocatalyst. The effect of different types of bridges on the catalytic activity and comonomer reactivity was reported. The ethano bridged 2 compound of a smaller dihedral angle showed much higher activity than the 1 compound in the ethylene homo- and copolymerizations. The catalytic activities of the two compounds were enhanced about twice when a suitable amount of 1-hexene comonomer is present in the feed. The copolymerization of ethylene with 1-hexene revealed a noticeable influence of the type of bridge on the relative reactivity of the 1-hexene. ¹³C-NMR analysis of copolymers showed that compound 1 is characterized by lower r_E, taken as an index of ethylene reactivity, and higher reactivity of 1-hexene. The bridge also affects the distribution of the 1-hexene along the copolymer chain, investigated through their product of reactivity ratios, r_Er_H. The thermal properties and the density of copolymers were not affected by the type of bridge of the metallocenes, but mainly depended on 1-hexene content in the copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2763–2772, 1999     

Chain microstructure of homogeneous ethylene‐1‐alkene copolymers and characteristics of single site catalysts using a direct 13C NMR peak method. Part III. Application to ethylene–propylene copolymers showing no inversion

All relevant ¹³C NMR signals of two series of seven homogeneous ethylene–propylene copolymers were used to fit the second‐order Markov reactivity ratios of the catalysts and the theoretical feeds. The copolymers cover a very broad range of comonomer incorporations, from about 10 to 93%, and show only primary (1,2) insertions. For both series, solutions are found with reliabilities >>99.5%. The reactivity ratios, r₁₁₂ = 2.54, r₁₂₁ = 0.12, r₂₁₂ = 2.05, and r₂₂₁ = 0.29 for the used Zirconocone and r₁₁₂ = 1.69, r₁₂₁ = 0.32, r₂₁₂ = 1.56, and r₂₂₁ = 0.51 for the hafnocene, provide direct information about the metallocenes, the kinetics, and the chain microstructure. With these results, the direct peak method demonstrates that the use of all relevant ¹³C NMR peaks enables accurate second‐order Markov modeling, revealing subtle differences between copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 747–755, 2006     

Application of electrochemically generated molybdenum‐based catalyst system to the ring‐opening metathesis polymerization of norbornene and a comparison with the tungsten analogue

This study describes the application of the electrochemically generated molybdenum‐based catalyst system MoCl₅? e^?? Al? CH₂Cl₂ to ring‐opening metathesis polymerization of bicyclo[2.2.1]hept‐2‐ene (norbornene). The results are compared with those previously obtained by the WCl₆? e^?? Al? CH₂Cl₂ system. The polymer product has been characterized by ¹H and ¹³C NMR, IR and gel‐permeation chromatography techniques. This molybdenum‐based catalyst system has led to a mainly trans stereoconfiguration (ca 60%) of the double bonds, in contrast to the polymer obtained with the tungsten‐based analogue, where the cis content is 60%. Analysis of the poly(1,3‐cyclopentylenevinylene) microstructure by ¹³C NMR spectroscopy revealed that the polymer having σ_c = 0.41 (fraction of double bonds with cis configuration) contains a slightly blocky distribution (r_tr_c > 1) of the double‐bond dyads (r_tr_c = 1.44). In addition, the influence of reaction parameters, e.g. reaction time, electrolysis time and catalyst aging time, on conversion has been analysed in detail. Copyright © 2005 John Wiley & Sons, Ltd.     

Radical copolymerization of vinylidene cyanide with 2,2,2‐trifluoroethyl methacrylate: Structure and characterization

A novel copolymer of vinylidene cyanide (VCN) and 2,2,2‐trifluoroethyl methacrylate (MATRIF) was synthesized by bulk free radical process in a 52% yield from an equimolar comonomer feed. The copolymer's composition and microstructure were analyzed by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy, SEC, and elemental analysis. The reactivity ratios calculated from both the Q‐e Alfrey‐Price parameters and the Jenkins' Patterns Scheme indicate a tendency to alternation in the copolymerization, the latter method suggesting that MATRIF homopropagation be slightly favoured (r_V = r₁₂ = 0.1, r_M = r₂₁ = 0.3). The molar incorporation of VCN in the copolymer was only 42 mol % according to the 9.0 wt % nitrogen content determined by elemental analysis, in good agreement with the value obtained by ¹H‐NMR. High‐resolution ¹H and ¹³C‐NMR spectra were used to study the microstructure of the copolymer. As an example, the three well‐resolved carbonyl resonances in the ¹³C‐NMR spectrum were assigned to the MATRIF‐centered triads VMV, VMM, and MMM, respectively, (V and M stand for VCN and MATRIF, respectively). The presence of VCN dyads (e.g., in VVM and VVV sequences) was shown to be marginal or absent altogether. Thermogravimetric analysis of poly(VCN‐co‐MATRIF) copolymer showed good thermal stability, and its main pyrolytic degradation taking place only above 368 °C. A 4% weight loss at about 222 °C suggested the presence of a few VCN homodyads, possibly inducing thermal depolymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Free‐radical copolymerization of styrene and itaconic acid studied by 1H NMR kinetic experiments

The free‐radical copolymerization of itaconic acid (IA) and styrene in solutions of dimethylformamide and d₆‐dimethyl sulfoxide (50 wt %) has been studied by ¹H NMR kinetic experiments. Monomer conversion versus time data were used to estimate the ratio k_p · k_t^−0.5 for various comonomer mixture compositions. The ratio k_p · k_t^−0.5 varies from 5.2 · 10⁻² for pure styrene to 2.0 · 10⁻² mol^0.5 L^−0.5 s^−0.5 for pure IA, indicating a significant decrease in the rate of polymerization. Individual monomer conversion versus time traces were used to map out the comonomer mixture–composition drift up to overall monomer conversions of 60%. Within this conversion range, a slight but significant depletion of styrene in the monomer feed can be observed. This depletion becomes more pronounced at higher levels of IA in the initial comonomer mixture. The kinetic information is supplemented by molecular weight data for IA/styrene copolymers obtained by variation of the comonomer mixture composition. A significant decrease in molecular weight of a factor of 2 can be observed when increasing the mole fraction of IA in the initial reaction mixture from 0 to 0.5. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 656–664, 2001