Demetallation of α, β, γ, δ-tetra(p-sulfophenyl)porphineiron(III) in sulfuric acid-ethanol-water media

The rate of demetallation of α, β, γ,δ-tetra(p-sulfophenyl)porphineiron (III), Fe(TPPS)^3-, was determined in sulfuric acid-ethanol-water media for 8.5-10.65M sulfuric acid at different temperatures. The overall reaction was the conversion of the complex Fe(TPPS)^3- into the diacid species H₄TPPS^2- without other spectrophotometrically important species being formed to an appreciable extent, as shown by three isosbestic points at 418, 462, and 563 nm. The rate was first order in the Fe(TPPS)^3- concentration. The pseudo-first-order rate constants k were exponentially dependent on the sulfuric acid concentration, and log k was linearly dependent on the Hammett acidity function –H₀. The average ΔH? and ΔS? values for five reaction media were 18.4 ± 1.4 kcal/mol and 19 ± 3 cal/°K · mol, respectively. The linear relationship between log k and (-H₀) and the approximately constant values of ΔH? ΔS? over the acid range investigated indicated that the same mechanism of demetallation was operative over this acid range. Because of the dependence of the pseudo-first-order rate constants on the acidity of the medium, the mechanism probably involves the addition of protons to pyrrole N atoms to assist in the breaking of iron (III)-nitrogen bonds.     

Polyesters,polycarbonate, and polyurethanes from a novel monomer: α,α,α′,α′-tetramethyl-1,4-tetrafluorobenzenedimethanol

The novel diol monomer, α,α,α′,α′-tetramethyl-1,4-tetrafluorobenzenedimethanol, has been synthesized by a convenient route which involves the addition of acetone to 1,4-dilithiotetrafluorobenzene and can be purified by washing with hexanes. It does not directly undergo condensation polymerizations with diacid chlorides. Its disodium salt, prepared by its reaction with sodium hydride, similarly fails to undergo such polymerizations readily. However, the dilithium salt, prepared in situ by the reaction of the title diol with 2 equiv of n-butyllithium in tetrahydrofuran, is suitable for the preparation of various classes of condensation polymers. Four polyesters and one polycarbonate derived from the reactions of the dilithium salt of the diol with adipoly dichloride, sebacoyl dichloride, isophthaloyl dichloride, terephthaloyl dichloride, and phosgene and two polyurethanes derived from its reactions with tolylene-2,4-diisocyanate and methylene-di-1,4-phenyl diisocyanate were prepared. Each was fully characterized by GPC, NMR, IR, and UV-visible spectroscopies, and the results of these studies are reported herein. © 1993 John Wiley & Sons, Inc.     

Effect of tin tetrachloride on thermal decompositions of α,α′-azobisisobutyronitrile and dimethyl α,α′-azobisisobutyrate

Thermal decomposition of α,α′-azobisisobutyronitrile (AIBN) and dimethyl α,α′-azobisisobutyrate (MAIB) in the presence of a large amount of tin tetrachloride was investigated to determine the effect of complex formation on the decomposition rates and yields of the recombination products. The addition of tin tetrachloride significantly increased the decomposition rates; the observed first-order rate constant increased by factors of 4.5 and 17 at molar ratios of [SnCl₄]/[AIBN] = 21.65 and [SnCl₄]/[MAIB] = 19.53, respectively. It was found that the decomposition of these azo compounds was also accelerated by the addition of a comparable amount of donor solvent such as ethyl acetate or propionitrile to tin tetrachloride and that the enhancement in rate was accounted for by a larger frequency factor in the Arrhenius equation. Furthermore, the addition of tin tetrachloride seemed to suppress the formation of recombination products, tetramethyl succinonitrile and dimethyl tetramethylsuccinate, of the radicals produced by decomposition.     

Kinetics of the reactions of cyclopropane derivatives. V. The gas-phase unimolecular reactions of 1 α-chloro-2α,3α-dimethylcyclopropane and 1α-chloro-2α,3β-dimethylcyclopropane

Thermolysis of the “all-cis” compound 1α-chloro-2α,3α-dimethylcyclopropane (A) at 550–607 K and 6–115 torr is a first-order homogeneous non-radical-chain process giving penta-1,3-diene (PD) and HCl as products. The Arrhenius parameters are log₁₀A(sec^?1) = 13.92 ± 0.08 and E = 199.6 ± 0.9 kJ/mol. The isomer with trans-methyl groups, 1α-chloro-2α,3β-dimethylcyclopropane (B) reacts by two parallel first-order processes giving as observed products trans-4-chloropent-2-ene (4CP) and PD + HCl, with log₁₀A(sec^?1) = 14.6 and 13.8, respectively, and E = 199.5 and 190.2 kJ/mol, respectively. The 4CP undergoes secondary decomposition to PD + HCl (as investigated previously). Comparison of the results for compounds (A) and (B) with those for other gas-phase and solution reactions leads to the conclusion that the gas-phase thermolyses proceed by rate-determining ring opening to form olefins which may decompose further by thermal or chemically activated reactions, and that the ring opening is a semiionic electrocyclic reaction in which alkyl groups in the 2,3-positions trans to the migrating chlorine semianion move apart, with appropriate consequences for the rate of reaction and the stereochemistry of the products.     

Radiation-induced terpolymerization of methyl α,β,β-trifluoroacrylate with tetrafluoroethylene and α-olefin

Radiation-induced terpolymerizations of methyl α,β,β-trifluoroacrylate (MTFA) with tetrafluoroethylene (TFE) and α-olefins, such as ethylene, propylene, and isobutylene, were carried out in bulk at 25°C for the purpose of controlling the content of ester group in the MTFA-α-olefin alternating copolymers. These monomers polymerized to form alternating terpolymers which contained 50 mole % α-olefin in a wide range of monomer composition. The content of MTFA, namely, the ester group in polymer, can be varied without destruction of the alternating structures between fluoroolefins (MTFA, TFE) and α-olefin by changing the MTFA/TFE ratio in the monomer mixture. The relative reactivities of MTFA and TFE in the terpolymerization were discussed according to kinetic treatments by free propagating and complex mechanisms. The relation between the MTFA/TFE ratio in the monomer mixture and that in terpolymer was explained favourbly by the complex mechanism. It was also concluded that the relative reactivity of MTFA is larger than that of TFE in the terpolymerizations.     

Lipophilic Functionalized Cobyrinic-Acid Derivatives. Part 1. Cobester α-monoacids (α,α,α,β,β,β-hexamethyl α-hydrogen Coα, Coβ-dicyanocobyrinates)

The four α,α,α, β,β,β,-hexamethyl α-hydrogen Coα, Coβ-dicyanocobyrinates 2b, d–f , with a free b-, d-, e-, and f-propionic-acid function, respectively, were prepared by partial hydrolysis of heptamethyl Coα, Coβ-dicyanocobyrinate (cobester; 1 ) in aqueous sulfuric acid. The cobester monoacids 2b, d–f were obtained as a ca. 1:1:1:1 mixture which was separated. The monoacids were purified by chromatography and isolated in crystalline form. The position of the free propionic-acid function was determined by an extensive analysis of 2b, d–f using 2D-NMR techniques; an analysis of the C,H-coupling network topology resulted in an alternative assignment strategy for cobyrinic-acid derivatives, based on pattern recognition. Additional information on the structure of the most polar of the four hexamethyl cobyrinates, of the b-isomer 2b , was also obtained in the solid state from a single-crystal X-ray analysis. Earlier structural assignments based on 1D-NMR spectra of the corresponding regioisomeric monoamides 3b, d–f (obtained from crystalline samples of the monoacids 2b, d–f ) were confirmed by the present investigations.     

A novel synthesis of α-hydroxy- and α,α′-dihydroxyketone from α-iodo and α,α′-diiodo ketone using photoirradiation

A novel reaction of α-iodo ketone (α-iodocycloalkanone, α-iodo-β-alkoxy ester, and α-iodoacyclicketone) with irradiation under a high-pressure mercury lamp gave the corresponding α-hydroxyketone in good yields. In the case of α,α′-diiodo ketone, α,α′-dihydroxyketone which little has been reported until now was obtained. This reaction affords a new, clean and convenient synthetic method for α-hydroxy- and α,α′-dihydroxyketone.     

Selectivity and Charge Transfer in Photoreactions of α,α,α-Trifluorotoluene with Olefins

In photoreactions of α,α,α-trifluorotoluene with olefins, the mode of reaction strongly depends on the charge transfer between the starting materials. Substitution of an F-atom is preferred if the electron transfer becomes exergonic, i.e. if ΔG <0 according to the Rehm-Weller equation. In all other systems of ΔG > 0, the olefins undergo cycloaddition onto the arene ring. In the transition area of ΔG ≈? 0 eV, both the electron transfer and the reaction mode can be controlled by varying the solvent polarity. For instance, 1 and 9 mainly form cycloaddition products in dioxane (ΔG = + 0.11 eV), whereas in solvents with ε > 3 (ΔG < 0), substitution is the only observed photoreaction. Moreover, in systems of endergonic electron-transfer processes, the degree and the direction of charge transfer influence both the regio- and the stereochemistry of the cycloaddition.     

Kinetic simulations for cyclization of α,ω‐telechelic polymers

In this work, we conducted kinetic simulations to examine the effects of various experimental conditions on cyclization during the feed of α,ω‐telechelic polymers into a reaction mixture. The simulations showed that the interplay between the feed rate and rate coefficients for cyclization and multiblock formation were the dominant and controlling parameters. The simulations were in good agreement with previously published results on cyclization of α,ω‐telechelic polystyrene with different molecular weights by the Cu‐catalyzed azide/alkyne cycloaddition (CuAAC) reaction. They also showed that high dilution was not a necessary condition for cyclization and that high percentages of monocyclic could be rapidly produced in solutions that are more concentrated. Previously reported work demonstrated that cyclic polystyrene could be prepared in less than 9 min at 25 °C using the CuAAC “click” reaction. These simulations allow for optimization and better experimental design, leading to the possibility of large scale production of cyclic polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A regenerable immobilized NADH model. II. Reduction of α,α,α-trifluoroacetophenone by immobilized 1,4-dihydronicotinamide in aprotic solvent

A regenerable dihydronicotinamide, immobilized on a macroreticular polystyrene resin was used for the reduction of trifluoroacetophenone (TFA) in acetonitrile. Practical reutilization of the polymeric reagent (91% per cycle) was obtained when magnesium perchlorate was added to the reaction of the immobilized dihydropyridine with TFA. A possible explanation of the role of Mg ion in the reaction of benzyldihydronicotinamide and its polymeric analog is presented. This explanation also accounts for the results of other NADH model reactions, described in the literature, and for the role of the Zn ion in the enzyme liver alcohol dehydrogenase (LADH).     

The hydrolysis of α,α'-dimethoxydihydrofurans

A series of α,α -dimethoxydihydrofurans have been prepared and subjected to various acidic and neutral hydrolysis conditions in attempts to prepare conjugated enediones in a stereospecific manner. Isomerization of the 3-hexene-2,5-diones and rearrangements of other enediones to β,γ-unsaturated-γ-lactones have been uncovered. Methods of assignment of stereochemical configuration to the enediones are evaluated; reaction with hydrazine hydrate in the absence of acid is proposed as a useful criterion.     

An unexpected synthesis of an α,β,γ,δ-unsaturated ketone due to an abnormal opening of benzylidene acetal by bromide anion

An unexpected synthesis of an α, β, γ,δ-unsaturated ketone, which embodies a new type of oxy-carbon cyclic structure, was achieved, while we tried to construct the taxane CB-ring system. Also, a series of abnormal reaction phenomena was found to be related to the formation and reaction of seven membered cyclic benzylidene acetal.     

Photochemische Reaktionen. 71. Mitteilung. Die Photoisomerisierung eines spirocyclischen α, β-Epoxyketons

On direct UV. irradiation and on triplet sensitization with acetophenone the spirocyclic epoxyketone (R)-(?)- 9 undergoes racemization (Φ^313/334 0.014, Φ^Sens 0.0060) and rearrangement to the enantiomeric spiro-β-diketones (R)-(+)- 14 (Φ^313/334 0.068, Φ^Sens 0.0037) and (S)-(?)- 14 (Φ^313/334 0.024, Φ^Sens 0.0023). The quantum yield data show that triplet reaction due to intersystem crossing is unimportant on direct irradiation, and they exclude that one common diradical intermediate of type d (Scheme 8) for the three reaction paths is involved in both the singlet and the triplet reaction. The postulate of photolytic Cα? O epoxide cleavage to intermediates of type d for the rearrangement requires that the rate of rearrangement is greater than the rate of rotation around the Cα? Cβ; bond in a given d , and that the rate difference is greater in singlet-generated d than in the triplet analogue. Reclosure of diradicals d and/or photolytic Cα? Cβ cleavage to diradical e and reclosure can account for the racemization of 9 . The optically active spiro-β-diketone 14 was found to racemize also on direct irradiation and on triplet sensitization. Furthermore, both 14 and the isomeric β-diketone 20 , which was obtained by UV. irradiation of the homocyclic epoxyketone 19 , photochemically isomerize to the enol lactones 23 and 21 , respectively.     

Carbon Magnetic Resonance Spectra of α, β, γ, δ- and α, β, α′, β′- Unsaturated Ketones

Carbon-13 spectra of a series of 26 unsaturated ketones (ortho- and para-cyclo-hexadienones and corresponding open-chain analogues) have been measured by Fourier-transform. Pulse spectroscopy. A complete analysis has been achieved by means of double resonance experiments using noise-modulated and coherent off-resonance proton irradiation and with the aid of non-decoupled spectra. Chemical shifts are interpreted in terms of charge distribution in the dienone system and of methyl substituent effects. Carbon chemical shifts were also obtained for O-protonated ortho- and para-cyclohexadienones. One-bond and long-range carbon-proton and carbon-fluorine spin coupling constants are reported for several compounds.     

Selektive Amidspaltung bei Peptiden mit α,α-disubstituierten α-Aminosäuren

Selective Amide Cleavage in Peptides Containing α,α-Disubstituted α-Amino Acids A new synthesis of dipeptides with terminal α,α-disubstituted α-amino acids, using 2,2-disubtituted 3-amino-2H-azirines 1 as amino-acid equivalents, is demonstrated. The reaction of 1 with N-protected amino acids leads to the corresponding dipeptide amides in excellent yield. It is shown that the previously described selective hydrolysis (HCl, toluene, 80°, or HCl, MeCN/H₂O, 80°) of the terminal amide group results in an extensive epimerization of the second last amino acid. An acid-catalyzed enolization in the intermediate oxazole-5(4H)-ones is responsible for this loss of configurational integrity. In the present paper, a selective hydrolysis of the terminal amide group under very mild conditions is described: In 3_N HCl (THF/H₂O 1:1), the dipeptide N,N-dimethylamides or N-methytlanilides are hydrolized at 25–35° to the optically pure dipeptides in very good yield.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

Direct Catalytic Asymmetric Vinylogous Additions of α,β‐ and β,γ‐Butenolides to Polyfluorinated Alkynyl Ketimines

We report a Zn‐ProPhenol catalyzed asymmetric Mannich reaction between butenolides and polyfluorinated alkynyl ketimines to obtain vinylogous products featuring two contiguous tetrasubstituted stereogenic centers. Notably, this is the first successful use of ketimines in the ProPhenol Mannich process, and the reaction offers a new approach for the preparation of pharmaceutically relevant products possessing trifluoromethylated tetrasubstituted alkylamines. The reaction can be performed on large scale with reduced catalyst loading without impacting its efficiency. Moreover, the acetylene moiety can be further elaborated using various methods.     

Thiocyanate-assisted demetallation of α,β,γ,δ-tetra(p-sulfophenyl)porphinatoindium(III) in aqueous media

The rate law for the demetallation of the title indium(III)-porphin complex in aqueous acidic thiocyanate media at 3.00M ionic strength was found to be of the form where [H₄P^2?] is the concentration of the diacid product formed, [InP]_t is the total concentration of all forms of indium(III)-porphin complex present, and a and b are constants. The constant a is a pseudo-third-order rate constant with the value (0.057 ± 0.005)M^?2 s^?1 and b has the value 0.704M^?2 at 50.5°C. If the mechanism for demetallation involves ringpuckering with the attachment of two H⁺ ions, then 1/b can be identified with the product K₁K₂ for the stepwise dissociation of two protons from two ring pyrrolic nitrogen atoms of H₂InP^?. In the sulfonated tetraphenylporphin used for these studies the ring pyrrolic nitrogen atoms seem to be the most probable sites for protonation. If this identification is correct, the value of 1.42 ± 0.13 found for the product K₁K₂ shows the enormous effect that the presence of the In³⁺ center has on the ionization constants of these two protons. That the kinetic studies show saturation effects with respect to proton addition to InP^3? may result from the fact that In³⁺ sits about 0.6 Å above the porphin ring.