Embedding magnetic nanoparticles into polysaccharide-based hydrogels for magnetically assisted bioseparation.

Based on the preparation of biocompatible polysaccharide-based hydrogels with stimuli-responsive properties by the copolymerization of maleilated carboxymethyl chitosan with N-isopropylacrylamide, novel magnetic hybrid hydrogels were fabricated by the in situ embedding of magnetic iron oxide nanoparticles into the porous hydrogel networks. Scanning electron microscopy (SEM) and thermogravimetric (TG) analyses showed that the size, morphology, and content of the iron oxide nanoparticles formed could be modulated by controlling the amount of maleilated carboxymethyl chitosan. As confirmed by X-ray diffractometry (XRD), equilibrium swelling ratio, and differential scanning calorimetry (DSC) measurements, the embedding process did not induce a phase change of the magnetic iron oxide nanoparticles, and the resultant hybrid hydrogels could retain the pH- and temperature-responsive characteristics of their hydrogel precursors. By investigating the partition coefficients of bovine serum albumin as a model protein, this magnetic hydrogel material was found to hold a potential application in magnetically assisted bioseparation.     

Substituent effects on the proton spin-spin coupling of benzenes with side-chain interacting groups

Sixty MHz NMR proton spectra of 15 2,4-substituted benzaldehydes and 12 methylbenzenes dissolved in different solvents have been accurately analyzed. Substituent effects on the coupling constants have been determined and have been found to be additive in those trisubstituted compounds where there are neither internal hydrogen bonds or strong interacting groups present.     

Synthesis of Tetraazide Derivatives of <Emphasis Type="Italic">p-tert</Emphasis>-Butylcalix[4]arene Using Copper-Catalyzed Nucleophilic Aromatic Substitution

Aromatic azido derivatives of p-tert-butylcalix[4]arene have been obtained for the first time using copper-catalyzed nucleophilic aromatic substitution of azide anion for bromide in 5,11,17,23-tetrabromo- 25,26,27,28-tetrabuthoxycalix[4]arene in a dioxane–water (3: 1) solvent mixture with N,N-dimethylethylenediamine as a stabilizing ligand for copper(I). When the reaction is carried out under with microwave heating, partial substitution products (mono-, distally di-, proximally di-, and trisubstituted) can be isolated in satisfactory yields.     

Characteristics of Interactions in the Pectin–Chitosan System

Interpolymeric complexes have been obtained from citric pectin and chitosan, the latter synthesized from crab chitin. The composition and structure of complexes obtained from different ratios of the components were studied by IR spectroscopy, rheological investigation of gel structure, and mathematical modelling of system properties. Rheological investigation of the processes involved in the formation of interpolymeric complexes with gel structures from citric pectin and chitosan was conducted in moderately concentrated solutions containing different ratios of the components. It was shown that the toughness of the gel structures was determined by the ratio of the amounts of the heterogeneous polymers. The toughest product (τ=121.4 Pa) was obtained by use of equimolar quantities of pectin and chitosan. With deviation of the composition of the mixture from equimolar the toughness of the gel decreased. It is proposed that the polyelectrolyte pectin–chitosan complex with a network structure is formed at the expense of electrostatic interaction between positively charged amino groups at C-2 of the chitosan pyranose ring and negatively charged carboxyl groups at the C-5 of the pectin pyranose ring.     

Structures of Addition Products of Acetylenedicarboxylic Acid Esters with Various Dinucleophiles. An application of C,H-spin-coupling constants

Heterocyclic compounds obtained by addition of acetylenedicarboxylic acid esters to thioureas, cyclic amidines and o-difunctionalized aromatic systems have been studied by ¹³C-NMR. In particular, C, H-spin-coupling constants over two and three bonds were used to differentiate between the various constitutional isomers and to establish the configuration of trisubstituted exocyclic C, C-double bonds. The configurational significance and diagnostic value of vicinal cis and trans C,H-spin coupling is again demonstrated in the present series.     

Preparation and Characterization of Chitosan Hydrochloride

Chitin 1 is a biodegradable and nontoxic polysaccharide widely spread among marine and terrestrial invertebrates and fungi. It is usually obtained from waste materials of the sea food-processing industry, mainly shells of crab, shrimp, prawn and krill. Native chitin occurs in such natural composite materials usually combined with inorganics, proteins, lipids and pigments. Its isolation calls for chemical treatments to eliminate these contaminants, some of which maybe coimmercially explored. By treating crude chitin with aqueous 40～50% sodium hydroxide at 110～115℃ chitosan is obtained. However, the fully deacetylated product is rarely obtained due to the risks of side reactions and chain deplolymerization. Chitosan and chitin are closely related since both are linear polysaccharides containing 2-acetamido-2-deoxy-D-glucopyranose and 2-amino-2-deoxy-D-glucopyranose units joined by β (1→4) glycosidic bonds. They can be distinguished by their contents of the above-mentioned units and by their solubilities in aqueous media. The acetylated units predominate in chitin while chitosan chains contain mostly deacetylated units. Chitin is soluble in a very limited number of solvents while chitosan is soluble in aqueous dilute solutions of a number of mineral and organic acids, being the most common ones, the hydrochloric and acetic acids. In aqueous dilute acid media chitosan forms salts, producing polyelectrolyte chains bearing positive charges on the nitrogen atoms of their amine groups. In fact the salt of chitosan may be formed in a separate step or as a consequence of the presence of acid in the water suspension of the neutralized form of chitosan.     

α,α-Disubstituted Allyl Sulfones: An approach to the synthesis of vinyl-branched pheromone analogues

The two-step alkylation of phenyl prop-2-enyl sulfone ( 1 ) with protected ω-bromoalkanols and 1-iodoalkanes (→ 3 ; see Scheme 1) followed by a Pd-catalyzed desulfonylation with LiBH₄ affords a 96:4 mixture of vinylbranched, protected alcohols and corresponding ethylidene-branched isomers (see Scheme 2; 4 and 5 , respectively). By utilizing the large difference in reactivity of mono- and trisubstituted C?C bonds towards singlet oxygen, the ethylidene derivatives are easily removed from the mixture by photo-oxygenation. The vinyl-branched compounds are inert to this reaction and can be conveniently isolated in highly pure form (99.5%) and ca. 45% overall yield.     

Addition of benzylzinc halides to alkenyl(phenyl)iodonium triflates: stereoselective synthesis of trisubstituted alkenes

Benzylic organozinc reagents generated by insertion of zinc metal into benzyl-bromine bonds react with alkenyl(phenyl)iodonium triflates to provide single stereoisomers of trisubstituted olefins. The extremely high reactivity of the phenyliodonio moiety allows these reactions to be performed in the absence of copper salts or palladium catalysts. The reaction is performed from -40 degrees C to room temperature in THF. Excellent yields of the desired cross-coupled products have been obtained despite the occurrence of a competing electron-transfer-induced fragmentation.     

Synthesis of polyesters containing acetylenic bonds in the chain

Summary By joint oxidative dehydropolycondensation of p-diethynylbenzene and dipropargyl esters, polymers have been obtained that contain triple bonds alternating with ester groups.     

Tough polyion complex hydrogel films of natural polysaccharides

The developments of tough hydrogels in recent years have greatly expanded the applications of hydrogels as structural materials. However, most of the tough hydrogels are made of synthetic polymers. To develop biopolymer-based tough hydrogels has both fundamental and practical significances. Here we report a series of polysaccharides-based tough hydrogel films prepared by polyion complexation and solvent evaporation of chondroitin sulfate(CS) and protonated chitosan(CHT) solutions with different weight ratios. The obtained CS/CHT gel films with thickness of 40-80 μm and water content of 66 wt%-81 wt% possess excellent mechanical properties, with tensile breaking stress and breaking strain being 0.4-3 MPa and 160%-320%, respectively. We found that in the mixture solutions there are large amounts of excess CHT in terms of charges; after swelling the films in water, the acetic acid, which is used to protonate the amino groups of CHT, diffuses out of the gel matrix, enhancing the intermolecular interactions between CHT molecules and thus improving the mechanical properties of gel films, besides the ionic bonds between CS and CHT. Antimicrobial tests also showed that the gel films with low weight ratio of CS to CHT, corresponding to the case with excess CHT, have evident antimicrobial effect. These CS/CHT gel films with good mechanical properties and antimicrobial effect should extend the applications of hydrogels in biomedical fields.     

Swelling behavior of chitosan hydrogels in ionic liquid-water binary systems

The swelling behavior of chitosan hydrogels in ionic liquid-water binary systems was studied using hydrophilic room-temperature ionic liquids (RTILs) to elucidate the swelling mechanism of chitosan hydrogels. No penetration of RTIL into a dry chitosan material was observed. Swelling was achieved by soaking in water-RTIL binary mixtures, with larger swelling observed at higher water contents. In one instance, the binary mixture was acidic and produced larger than expected swelling due to the dissociation of the amine groups in the chitosan. The equilibrium binary system content behavior of the chitosan hydrogels depended upon the amount of free water, which is a measure of the number of water molecules that do not interact with the ionic liquid. After evaporation of water, remnant RTIL remained in the chitosan network and hardness testing indicated a plasticization effect, suggesting that the RTIL molecularly mixed with the chitosan. Chitosan hydrogels containing only RTIL were prepared by dropping pure RTIL onto a fully preswollen hydrogel followed by water evaporation. This method may be a useful means for preparing air-stable swollen chitosan gels.     

Preparation and Properties of Alginate/Water‐Soluble Chitin Blend Fibers

Water‐soluble chitin (half‐deacetylated chitin) was prepared from chitosan by N‐acetylation with acetic anhydride. Alginate/water‐soluble chitin blend fibers were prepared by spinning their mixture solution through a viscose‐type spinneret into a coagulating bath containing aqueous CaCl₂ and ethanol. The structure and properties of the blend fibers were studied with the aids of infrared spectra (IR), X‐ray diffraction (XRD) and scanning electron microscopy (SEM). structure analysis indicated good miscibility existed between alginate and water‐soluble chitin, due to the strong interaction from the intermolecular hydrogen bonds and electrostatic interactions. Best values for the dry tensile strength and breaking elongation were obtained when the water‐soluble chitin content was 30 wt%. The wet tensile strength and breaking elongation decreased with the increase of water‐soluble chitin content. The introduction of water‐soluble chitin in the blend fiber can improve the water‐retention properties of the blend fiber compared to pure alginate fiber. The fibers treated with aqueous solution of silver nitrate have good antibacterial activity to Staphylococcus aureus.     

Total synthesis of epothilone D by sixfold ring cleavage of cyclopropanol intermediates

The ring-opening or ring fragmentation reactions of cyclopropanol intermediates are used in the total synthesis of epothilone D for the creation of trisubstituted double bonds, an ethyl ketone functionality, as well as for the protection of carboxylic and ester groups. Epothilone D is obtained in 1.6% overall yield (24 steps in the longest linear sequence) starting from (R)-methyl 2,3-O-isopropylideneglycerate. The key cyclopropanol intermediates are efficiently obtained by titanium(IV)-catalyzed reactions of readily available esters with Grignard reagents.     

Chitosan-dextran branched copolymers: Synthesis and properties

Chitosan-dextran branched copolymers have been synthesized, and the rheological properties of their aqueous acetic acid solutions have been studied. On the basis of the data of FTIR spectroscopy, the formation of chemical bonds between chitosan and dextran at the nitrogen atom has been confirmed. With the use of dynamic mechanical analysis and differential scanning calorimetry, the temperatures of relaxation transitions in the resulting branched copolymers have been determined. It is shown that, along with the formation of a branched copolymer, the chemical crosslinking of chitosan macrochains can occur. Mechanical properties of films formed from solutions of the obtained polymers have been studied.     

海藻酸盐/壳聚糖衍生物复合抗菌纤维

通过溶液纺丝法制备海藻酸盐/羧甲基壳聚糖（CMC）共混纤维,并用红外光谱,X射线衍射和扫描电镜对共混纤维进行了表征.结果表明：共混体系中的两种组分之间存在着较强的相互作用,有良好的相容性.当ωCMC=0.30时,共混纤维的干态抗张强度达到最大值,13.8cN/tex.当ωCMC=0.10时,纤维的干态断裂伸长率可达23.1%.纤维的湿态抗张强度和断裂伸长率随着CMC含量的增加而降低.CMC的引入,可显著提高纤维的吸水率.用壳聚糖季铵盐对纤维进行处理,可赋予纤维抗菌性.     

Preparation of electrospun chitosan/poly(vinyl alcohol) membranes

Electrospinning of chitosan from its solutions in 2% aqueous acetic acid was studied by adding poly(vinyl alcohol) (PVA) as a “guest” polymer. Properties of the chitosan/PVA solutions including viscosity, conductivity, and surface tension were measured, and effects of the polymer concentration, chitosan/PVA mass ratio and processing parameters (applied voltage, flow rate, capillary-to-collector distance) on the electrospinnability of chitosan/PVA were investigated. Analyses of scanning electron micrographs and transmission electron micrographs suggested that the chitosan/PVA ultrafine fibers were often obtained along with beads, and chitosan was located in the elctrospun fibers as well as in the beads. Uniform chitosan/PVA fibers with an average diameter of 99 ± 21 nm could be prepared from a 7% chitosan/PVA solution in 40:60 mass ratio. Results of Fourier transform infrared spectroscopy and X-ray diffraction demonstrated that there were possible hydrogen bonds between chitosan and PVA molecules, which could weaken the strong interaction in chitosan itself and facilitate chitosan/PVA electrospinnability. The electrospun chitosan/PVA membranes showed higher water uptake and would have potential applications in wound dressings.     

A sequential palladium-catalyzed alder-ene-reductive amination reaction

[reaction: see text]. Alkyne allyl alcohols are readily transformed into beta-amino ethyl alkylidene tetrahydrofurans or beta-amino ethyl alkylidene pyrrolidines in a Pd-catalyzed cycloisomerization-reductive amination sequence with remarkable chemoselectivity leaving benzyl groups and trisubstituted double bonds intact.     

Fe‐Catalyzed One‐Pot Oxidative Cleavage of Unsaturated Fatty Acids into Aldehydes with Hydrogen Peroxide and Sodium Periodate

A one‐pot method has been developed for the oxidative cleavage of internal alkenes into aldehydes by using 0.5 mol % of the nonheme iron complex [Fe(OTf)₂(mix‐bpbp)] (bpbp=N,N′‐bis(2‐picolyl)‐2,2′‐bipyrrolidine) as catalyst and 1.5 equivalents of hydrogen peroxide and 1 equivalent of sodium periodate as oxidants. A mixture of diastereomers of the chiral bpbp ligand can be used, thereby omitting the need for resolution of its optically active components. The cleavage reaction can be performed in one pot within 20 h and under ambient conditions. Addition of water after the epoxidation, acidification and subsequent pH neutralization are crucial to perform the epoxidation, hydrolysis, and subsequent diol cleavage in one pot. High aldehyde yields can be obtained for the cleavage of internal aliphatic double bonds with cis and trans configuration (86–98 %) and unsaturated fatty acids and esters (69–96 %). Good aldehyde yields are obtained in reactions of trisubstituted and terminal alkenes (62–63 %). The products can be easily isolated by a simple extraction step with an organic solvent. The presented protocol involves a lower catalyst loading than conventional methods based on Ru or Os. Also, hydrogen peroxide can be used as the oxidant in this case, which is often disproportionated by second‐ and third‐row metals. By using only mild oxidants, overoxidation of the aldehyde to the carboxylic acid is prevented.     

壳聚糖的γ射线辐射降解研究

动力学;无规降解;断链机理;壳聚糖的γ射线辐射降解研究     

The study of the interaction between chitosan and 2,2-bis(hydroxymethyl)propionic acid during solid-phase synthesis

New polymer salts and N-acetylated chitosan derivatives are prepared in an extruder by the method of solid-phase synthesis via the interaction of chitosan and 2,2-bis(hydroxymethyl)propionic acid. The effect of the initial component ratio and temperature on the yield and structure of the target products is studied. Joint deformation of solid components at room temperature is found to cause the quantitative formation of salt bonds between carboxylic groups of the acid and amino groups of chitosan. At elevated temperatures of synthesis, the corresponding acetylated derivatives with a degree of substitution of amino groups varying from 0.16 to 0.43 are prepared. The relaxation and phase transitions in the polymer salts and acetylated chitosan derivatives and their sorptional activity are studied. The films prepared from aqueous solutions of the new salt modification of chitosan are characterized by a homogeneous structure and improved mechanical characteristics relative to those of the films based on chitosan acetates. An additional thermal treatment of the products of the solid-phase synthesis leads to the formation of crosslinked and water-swollen materials that can be used for the development of novel polymeric chitosan-based membranes and sorbents.