The preparation of non-extractable methylphenylpolysiloxane stationary phases for capillary column gas chromatography

Summary The synthesis of methylphenylpolysiloxane polymers and their use in the preparation of crosslinked, non-extractable stationary phases for fused-silica capillary columns are described. By preparing more viscous phenyl-containing polymers than are commercially available, stationary phase films of these polymers could be efficiently coated on fused-silica capillary columns and stabilized by a free radical crosslinking mechanism using peroxides. Four methylphenylpolysiloxane polymers containing different phenyl concentrations were prepared. These included three polymers containing 50% phenyl and one polymer containing 70% phenyl. Two of the 50% phenyl polymers had one phenyl and one methyl group attached to each silicon atom. One of these also had 1% vinyl incorporated. The third 50% phenyl polymer was synthesized in such a way that one half of the silicon atoms had two phenyl groups attached while the rest contained dimethyl groups. The 70% phenyl polymer also had 4% vinyl incorporated. Due to the intrinsic thermal stability of these phenyl phases and the enhanced film stability achieved by crosslinking, the 70% phenyl phase could be utilized up to 400 °C. Using the methods described in this paper, highly efficient and thermally stable fused silica capillary columns coated with crosslinked methylphenylpolysiloxane stationary phases can be successfully prepared.     

Molecular Radical Chain Initiators for Ambient‐ to Low‐Temperature Applications

An overview of methods for the initiation of radical chain reactions by specific initiator compounds, which generate radicals, is given. These can be utilized to initiate any kind of radical chain reaction by transforming substrates into the desired radical intermediates. Azo initiators, peroxides, nitroxides, trialkylboranes, dialkyl zinc compounds, and type I photoinitiators are discussed, as well as methods of redox‐ and sonochemical initiation. Methods of direct radical formation from the substrates, such as photoredox catalysis or high‐energy irradiation, are not included. The focus of this review lies on rather “low” temperatures in the range of 50 °C down to ?78 °C, which can be useful to achieve more selective reactions. Illustrative applications of such radical chain initiators in a variety of reactions are discussed, including stereoselective ones and polymerizations.     

Chemical modification of poly(lactic acid) induced by thermal decomposition of N‐acetoxy‐phthalimide during extrusion

Chemical modification of poly(lactic acid) (PLA) with N‐acetoxy‐phthalimide (NAPI) was performed in the melt by reactive extrusion, without using any peroxide initiator. The aminyl and nitroxide radicals produced from the NAPI thermal degradation, were, respectively, used (a) to create PLA macroradicals, and (b) to functionalize the PLA samples through nitroxide radical coupling. Depending on the extrusion temperature and the initial NAPI concentration, grafting rates up to 0.24 mol % were measured, modifying the PLA optical properties. This study represents an original new way of modification of PLA without the use of conventional peroxide initiators. Indeed, the undesirable side reactions (PLA branching or crosslinking) usually observed when using peroxides to initiate the radical grafting of PLA were avoided when using NAPI. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 120–129     

A new method for in situ crosslinking of stationary phases on fused silica capillary columns

A new mixed crosslinking agent composed of dicumyl peroxide and tetra(methylvinyl)cyclotetrasiloxane was used to prepare fused silica capillary columns with in situ crosslinked stationary phases including PEG-20M, SE-54, and OV-1. These columns proved to have good thermostability and inertness. As examples of potential applications a mixture of isomers of nitrotoluene and dinitrotoluene, and pyrolyzates of polystyrene were separated by using these columns.     

Synthesis of graft polymers from an ozonized ethylene vinyl acetate copolymer (EVA). I. Study of the radical polymerization of styrene initiated by an ozonized EVA

Polymers can be ozonized with an ozone/oxygen mixture to create peroxides and hydroperoxides on the polymer chain. These heat-sensitive functional groups can be used to initiate radical polymerization of vinyl monomers and give graft copolymers. The properties of these copolymers are well described in literature; however, we notice that available data concerning decomposition rate constants are inconsistent. Decomposition rate measurements, time of assay of free radicals and stability of the ozonized polymers do not give the same results. In this work, we studied the kinetics of the styrene polymerization initiated by an ozonized ethylene vinyl acetate copolymer. Consequently, the f·kd product can be calculated (f is the efficiency and kd the decomposition rate constant). The ozonized copolymer is not similar to usual radical initiators. The initial viscosity of the solution has an important effect on the calculation of the kinetic values. Activation energy and Arrhenius coefficient are different than the one obtained for the usual initiators. © 1994 John Wiley & Sons, Inc.     

Synthesis of star polymers via nitroxide mediated free‐radical polymerization: A “core‐first” approach using resorcinarene‐based alkoxyamine initiators

The synthesis of new octafunctional alkoxyamine initiators for nitroxide‐mediated radical polymerization (NMRP), by the derivatization of resorcinarene with nitroxide free radicals viz TEMPO and a freshly prepared phosphonylated nitroxide, is described. The efficiency of these initiators toward the controlled radical polymerization of styrene and tert‐butyl acrylate is investigated in detail. Linear analogues of these multifunctional initiators were also prepared to compare and evaluate their initiation efficiency. The favorable conditions for polymerization were optimized by varying the concentration of initiators and free nitroxides, reaction conditions, etc., to obtain well‐defined star polymers. Star polystyrene thus obtained were further used as macro‐initiator for the block copolymerization with tert‐butyl acrylate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5559–5572, 2007     

环氧树脂的紫外光引发阳离子／自由基固化

研究了两类阳离子引发剂复合苯基硫钅翁盐和芳茂铁盐的紫外光引发活性以及它们分别与自由基引发剂的复合体系的增强光引发活性，并讨论了强氧化剂异丙苯过氧化氢对于芳茂铁盐引发效率的促进作用以及适量多元醇对于提高阳离子固化体系交联度所起的作用     

Novel emulsion graft copolymerization onto the silylmethyl group of poly(dimethylsiloxane)

The influence of radical initiators upon the emulsion graft copolymerization of styrene and acrylonitrile onto poly(dimethylsiloxane) (PDMS) was studied. As initiators, a series of peroxides and hydroperoxides were coupled with ferrous sulfate, among which the tert-butyl peroxylaurate system gave the highest grafting efficiency (30%). The tert-butyl peroxylaurate initiator fulfills the criteria for efficient radical grafting by generating only the tert-butoxy radical, which is reluctant to form a carbon radical via β-scission, being highly hydrophobic, and not carrying a tertiary hydrogen that may be abstracted by a radical. ¹³C-NMR analysis of the products showed that the grafting occurred on the silylmethyl groups of PDMS to give 10–25 grafts per polymer and graft ratio in the range 44–140%. The PDMS graft copolymers thus obtained could be used as surface-modifying agents to improve the lubricity and water-repellency of ABS [poly(styrene-co-acrylonitrile)-graft-polybutadiene]. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2607–2617, 1997     

聚甲基丙烯酸葡萄糖酯及聚甲基丙烯酸纤维二糖酯高效液相色谱手性固定相的性能测评

首先合成了甲基丙烯酸葡萄糖酯和甲基丙烯酸纤维二糖酯,然后通过甲基丙烯酸-3-(三甲氧基硅基)丙酯分别聚合在硅胶上,并将其作为高效液相色谱手性固定相。分别以正己烷-异丙醇(体积比为90:10)、正己烷-异丙醇-三乙胺(体积比为90:10:0.2)和正己烷-异丙醇-三氟乙酸(体积比为90:10:0.2)溶液作为流动相,对15种包含醇类、胺类、酰胺类和酮类的外消旋体化合物进行手性拆分。拆分结果表明,葡萄糖和纤维二糖聚合物固定相对大多数醇类和胺类以及部分酰胺类和酮类外消旋体化合物有较好的手性识别能力,并且二者的手性识别能力还具有一定的互补性。该研究表明,单糖和二糖聚合物固定相可成为一类新型的高效液相色谱手性固定相。     

Synthesis of poly(N‐[tris(hydroxymethyl)methyl]acrylamide) functionalized porous silica for application in hydrophilic interaction chromatography

Porous silica coated by a highly hydrophilic and nonionic tentacle‐type polymeric layer was synthesized by free radical “grafting from” polymerization of N‐[2‐hydroxy‐1,1‐bis(hydroxymethyl)ethyl]‐2‐propenamide (TRIS‐acrylamide) in partly aqueous solutions. The radical initiator sites were incorporated on the silica surfaces via a two‐step reaction comprising thionyl chloride activation and subsequent reaction with tert‐butyl hydroperoxide. The surface‐bound tert‐butylperoxy groups were then used as thermally triggered initiators for graft polymerization of TRIS‐acrylamide. The synthesized materials were characterized by diffusive reflectance Fourier transform infrared specotroscopy, X‐ray photoelectron spectroscopy, and CHN elemental analysis. Photon correlation spectroscopy was used to determine changes in ζ‐potentials resulting from grafting, ²⁹Si magic angle spinning nuclear magnetic resonance spectroscopy (MAS‐NMR) spectroscopy was used to assess the ratio of silanol to siloxane groups in the substrate and the grafted material, and the changes in surface area and mesopore distribution were determined by nitrogen cryosorption. Chromatographic evaluation in hydrophilic interaction chromatography (HILIC) mode showed that the materials were suitable for use as stationary phases, featuring good separation efficiency, a comparatively high retention, and a selectivity that differed from most commercially available HILIC phases. A comparison of this neutral phase with a previously reported N‐(2‐hydroxypropyl)‐linked TRIS‐type hydrophilic tentacle phase with weak anion exchange functionality revealed substantial differences in retention patterns.     

Chromatographic evaluation of self-immobilized stationary phases for reversed-phase liquid chromatography

The preparation of stationary phases for HPLC using polymers deposited on silica usually includes an immobilization step involving cross-linking by free radicals induced by ionizing radiation or by other radical initiators. The present paper reports changes which occur at ambient temperature in the character of poly(methyloctylsiloxane) deposited on porous silica particles as a function of the time interval between particle loading and column packing. Column performance and retention factors increase with time and these changes are attributed to rearrangement (self-assembly) which result in "self-immobilization" of the polymer molecules on the silica surface.     

Methacrylate-based monolithic layers for planar chromatography of polymers

A series of macroporous monolithic methacrylate-based materials was synthesized by in situ free radical UV-initiated copolymerization of functional monomers, such as glycidyl methacrylate (GMA), butyl methacrylate (BuMA), 2-aminoethyl methacrylate (AEMA), 2-hydroxyethyl methacrylate (HEMA) and 2-cyanoethyl methacrylate (CEMA), with crosslinking agent, namely, ethylene glycol dimethacrylate (EDMA). The materials obtained were applied as the stationary phases in simple and robust technique - planar chromatography (PLC). The method of separation layer fabrication representing macroporous polymer monolith bound to the specially prepared glass surface was developed and optimized. The GMA-EDMA and BuMA-EDMA matrixes were successfully applied for the separation of low molecular weight compounds (the mixture of several dies), as well as poly(vinylpyrrolidone) and polystyrene homopolymers of different molecular weights using reversed-phase mechanism. The materials based on copolymers AEMA-HEMA-EDMA and CEMA-HEMA-EDMA were used for normal-phase PLC separation of 2,4-dinitrophenyl amino acids and polystyrene standards.     

六(甲氧基甲基)三聚氰胺/多元醇/二甲基丙烯酸酯的混合体系的聚合

六(甲氧基甲基)三聚氰胺(HMMM)-二缩三乙二醇(T_3EG)和二缩三乙二醇二甲基丙烯酸酯(T_3EGMA)的混合体系加入潜酸催化剂后,在较高温度下可同时进行缩聚和自由基聚合并表现出协同效应.在这一混合聚合体系中HM-MM不仅是交联剂,而且是体系中活泼亚甲基氧化为过氧化氢物的催化剂,由潜酸催化剂分解出的酸是缩聚的催化剂,也是过氧化氢物分解为自由基的催化剂,生成的自由基可引发T_3EGMA聚合.有关凝胶时间实验,吸氧实验和活性氧测定的结果支持上述论断.     

Synthesis and radical polymerization behavior of bifunctional vinyl monomer derived from N‐vinylacetamide and p‐chloromethylstyrene

The radical polymerization of N‐(p‐vinylbenzyl)‐N‐vinylacetamide ( 1 ) prepared by the reaction of N‐vinylacetamide with p‐chloromethylstyrene was carried out by using radical initiators such as AIBN or BPO in benzene, chlorobenzene, or bulk. As a result, poly 1 was successfully isolated by dialysis (yield, 10–36%). The crosslinking reaction of poly 1 was carried out at 60–100 °C for 8 h. By using a radical initiator such as AIBN or BPO (3 mol %), the crosslinking reaction proceeded (yield, 63–79%). Moreover, the crosslinking reaction of poly 1 proceeded at 100 °C without a radical initiator in 50% yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2714–2723, 2006     

Modified cubic spherosilicates as macroinitiators for the synthesis of inorganic–organic starlike polymers

Modified cubic spherosilicate cages of the type [Si₈O₂₀]^8? were used as rigid, inorganic cores for the synthesis of macroinitiators for thermal and photoinduced free radical and controlled radical polymerizations. Two different routes to these macroinitiators were investigated: the direct modification of the octaanion with chlorosilane‐functionalized initiators and the hydrosilation of SiH‐substituted cages. The latter synthesis of the macroinitiators resulted in more defined reaction products. With these compounds, the polymerizations of styrene and methyl methacrylate were carried out. The free radical polymerizations showed broad polydispersities based on coupling reactions, whereas the copper‐mediated atom transfer radical polymerizations (ATRP) revealed that good polymerization control could be achieved with the prepared initiators. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3858–3872, 2002     

Optimization of the synthesis of a hyper-crosslinked stationary phases: a new generation of highly efficient, acid-stable hyper-crosslinked materials for HPLC

A new family of hyper-crosslinked (HC) phases was recently developed for use under very aggressive conditions including those encountered in ultra-fast, high-temperature two-dimensional liquid chromatography (2-DLC). This type of stationary phase has improved acid stability compared with the most acid-stable, commercial RPLC phases. Kinetic studies are here reported that allow optimization of reaction time and crosslinking reagent concentrations used to prepare such HC phases. We have determined that the Friedel-Crafts chemistry used to prepare HC phases is nearly complete within about 15 min. Thus, reaction time for each step of the synthesis was greatly reduced from the multihour reactions used previously without sacrificing the stationary phases' acid stability and separation performance. Results from elemental analysis of the finished particles were combined with LC data to provide insights regarding the properties of these HC phases. This new generation of acid stable HC phases, with their attractive chromatographic properties, should be very useful in the separations of bases or biological analytes in acidic media, especially at elevated temperatures.     

Free-radical generation mechanism and antimalarial activity of cyclohexyl endoperoxides

A kinetic analysis has been carried out for a cascade of intramolecular oxidation reactions of free radicals generated in the redox reactions of substituted cyclohexyl endoperoxides (15 compounds) with the Fe²⁺ ion. Each radical conversion reaction has been characterized by its enthalpy, activation energy, and rate constant. Kinetic characteristics have been calculated by the intersecting parabolas method. Depending on their structure, cyclohexyl endoperoxides generate one to three radicals. There is a linear empirical correlation between the number of radicals generated by a peroxide and its molar antimalarial activity (IC ₅₀/M, where M is the molar mass of the peroxide). The peroxides that generate no more than one radical show no antimalarial activity.     

Nonextractable cyanopropyl polysiloxane stationary phases for capillary chromatography

Summary Crosslinkable cyanopropylpolysiloxane stationary phases have been difficult to produce because of steric effects of the large cyanopropyl groups or because of the interaction between the polar cyanopropyl groups and the groups added for crosslinking. Various polymers containing 50% to 90% cyanopropyl were synthesized which contained vinyl,p-tolyl, or 4-vinylphenyl groups for crosslinking. Thep-tolyl group was found to give satisfactory crosslinking if there were two such groups attached to one silicon atom.     

Reactions and polymerization of 1-trityl-4-vinylimidazole

1-Trityl-4-vinylimidazole was prepared by direct tritylation of 4(5)-vinylimidazole and polymerized using a free radical initiator. Poly(1-trityl-4-vinylimidazole) was hydrolyzed using aqueous acetic acid to give poly[4(5)-vinylimidazole]. The poly[4(5)-vinylimidazole], which was obtained from the hydrolysis of poly(1-trityl-4-vinylimidazole), was compared with poly[4(5)-vinylimidazole] prepared directly from 4(5)-vinylimidazole for differences in stereochemistry. The stereochemistry of both polymers was found to be similar by high-resolution NMR. Thus, the trityl does not influence the stereochemistry of poly[4(5)-vinylimidazole]. The reaction of 1-trityl-4-vinylimidazole with n-butyllithium gave 2-lithio-1-trityl-4-vinylimidazole. This intermediate was used to prepare 2-substituted 4(5)-vinylimidazoles, which are new monomers that can be polymerized using free radical initiators.     

Reaction of polymethine dyes with hydroperoxides and free radicals

The interaction kinetics of the cationic and anionic polymethine dyes with radicals has been studied. Azoinitiator AAPH, as well as tert-butyl hydroperoxide, and hydrogen peroxide were used as radical initiators in water and buffer solutions at 37 °C. It is shown that the dyes are active scavengers of peroxyl radicals. It is found that reactivity and behavior of dyes in relation to the peroxides are strongly dependent on the structure of lateral substituents in polymethine chains.