Synthesis and characterization of certain new poly(bisimide)s. I

Maleic and citraconic anhydrides were reacted with several diamines to obtain a novel class of high temperature resistant bisimides.^1–3 The bisimides were characterized by melting points, elemental analysis, UV–Vis, ¹H- and ¹³C-NMR, and mass spectral analysis. The bisimide monomers were then polymerized by the addition process. A poly(amidemaleimide) was also synthesized by reacting maleic anhydride with p-aminobenzhydrazide. The thermal stability of these highly crosslinked poly(bisimide)s were examined by TGA and DTA. A neat bisimide monomer obtained from 2,2′-bis[4(p-aminophenoxy)phenyl] propane with maleic anhydride namely, 2,2′-bis[4-(p-maleimidophenoxy)phenyl]propane was reacted with 2,2′-bis[4(p-aminophenoxy)phenyl]propane by the Michael reaction.⁴ A fiber glass cloth reinforced laminate was prepared from bismaleimide and amine mixture and the mechanical properties of the test laminate evaluated.     

New viologen analogs: 1,4-bis[2-(pyridin-4-yl)ethenyl]benzene quaternary salts

Alkylation of 1,4-bis[2-(pyridin-4-yl)ethenyl]benzene with alkyl p-toluenesulfonates and dimethyl sulfate gave new viologen analogs, 1-alkyl-4-(2-{4-[2-(1-alkylpyridinium-4-yl)ethenyl]phenyl}ethenyl)-pyridinium bis(p-toluenesulfonates) and sulfate. Their derivatives with tetrafluoroborate and tetraphenylborate ions were also obtained. Spectral properties of the synthesized compounds were examined, and their structure was determined by X-ray analysis.     

Phthalonitrile cure reaction with aromatic diamines

Phthalonitrile monomers can be polymerized thermally in the presence of small amounts of curing agents into thermosetting polymers. The thermosets exhibit outstanding thermo-oxidative stability, display good mechanical properties, and offer promise as matrices for composite applications. The phthalonitrile cure reaction is typically accomplished with an aromatic diamine, 1,3-bis(3-aminophenoxy)benzene (m-APB), added in the range of 1.5–2% by weight of the monomer in the melt phase. This article addresses the cure reaction with a sulfone-containing diamine, bis[4-(4-aminophenoxy)phenyl] sulfone (p-BAPS), which shows lower volatility as determined from thermogravimetric studies (TGA) compared to m-APB at the processing temperatures typically employed for phthalonitrile cures. Rheometric studies conducted to monitor the viscosity increase during a cure reaction suggest that the cure reaction with m-APB is faster compared to the reaction with p-BAPS. Even though differences are seen in the initial cure rates, the final cured products are similar in terms of the glass transition temperatures and thermal and oxidative stabilities. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1885–1890, 1998     

Phenylated polyimides: Diels-Alder reaction of biscyclopentadienones with dimaleimides

A series of phenylated polydihydrophthalimides has been synthesized by the Diels-Alder reactions of 3,3′-(oxydi-p-phenylene)bis(2,4,5-triphenylcyclopentadienone) and 3,3′-(p-phenylene)bis(2,4,5-triphenylcyclopentadienone) with N,N′-o-, -m-, and -p-phenylenedimaleimide. The polydihydrophthalimides were soluble in dimethylformamide (DMF) and had intrinsic viscosities that ranged from 0.33 to 1.01, the polymers were dehydrogenated thermally and chemically to afford the corresponding phenylated polyphthalimides. The totally aromatic polyimides were also soluble in DMF but had intrinsic viscosities only as high as 0.41. The thermogravimetric analyses of the polyphthalimides showed breaks near 530°C in air and in nitrogen atmospheres.     

Cardanol-based bisbenzoxazines

A new class of thermoset polymers was synthesized based on agrochemical renewable cardanol—a by-product of cashew nut industry. A solventless synthesis of bisbenzoxazine monomers based on bisphenol-A (b) and aniline (abbreviated as Bzb-A) and cardanol (c) with diamines namely bis-(4-(4-aminophenoxy)phenyl)ether (HP), bis-(3-(4-aminophenoxy)phenyl)ether (HM), 4,4′-diaminodiphenylsulphone (DDS) and 2,2-bis(4-(4-aminophenoxy)phenyl)propane (BA) was carried out. The benzoxazine monomers (Bzc-HP, Bzc-HM, Bzc-DDS and Bzc-BA) were characterized by ¹H-NMR and FTIR spectroscopy. The curing exotherm depended on the structure of the monomers. The onset curing temperature (T _o) was lowest for Bzb-A (460 K) and highest in Bzc-HM (518 K). The decomposition temperature for 5% mass loss (T _5%) of resins followed the order PBzb-A < PBzc-DDS < PBzc-BA < PBzc-HM ≈ PBzc-HP. The materials showed their potential as adhesives. Lap shear strength on steel plates followed the trend PBzc-DDS < PBzc-HM < PBzc-BA < PBzc-HP.     

Synthesis and properties of aromatic polyamides containing the cyclohexane structure

1,1-Bis[4-(4-carboxyphenoxy)phenyl]cyclohexane (III) and 1,1-bis[4-(4-aminophenoxy)phenyl]cyclohexane (V) were prepared in two main steps starting from the aromatic nucleophilic substitution of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 1,1-bis(4-hydroxyphenyl)cyclohexane in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides with cyclohexylidene cardo groups were directly polycondensated from dicarboxylic acid III with various aromatic diamines or from diamine V with various aromatic dicarboxylic acids in an N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The polyamides exhibited inherent viscosities in the range of 0.45 to 1.78 dL/g. Almost all of the polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and could afford transparent, flexible, and tough films by solution casting. The glass transition temperatures (T_g) of these aromatic polyamides were in the range of 180–243°C by DSC, and the 10% weight loss temperatures in nitrogen and air were all above 450°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3575–3583, 1999     

New polypyromellitimide films based on cyclotriphosphazene and bisaspartimide derived diamines

Three new thermally stable polypyromellitimide films were made by the thermal cyclodehydration of the corresponding polyamic acids obtained by the polymerization of pyromellitic dianhydride with 4,4′-bis{N²-[4-(4-aminobenzyl)phenyl]aspartimido} diphenylmethane, 4,4′-bis{N²-[4-(4-aminophenoxy)phenyl]aspartimido} diphenylether, and bis(4-aminophenoxy)tetrakis (4-phthalamic acid phenoxy)cyclotriphosphazene. The bis(4-aminophenoxy)tetrakis (4-phthalamic acid phenoxy)cyclotriphosphazene was obtained from hexakis(4-aminophenoxy)cyclotriphosphazene involving its reaction with phthalic anhydride. The structure of these materials and precursors were characterized by using Fourier-transform-infrared (FT–IR) and proton nuclear magnetic resonance spectroscopy. The thermal stabilities of the films were evaluated by the thermogravimetric analysis, showing char yields at 800°C ranging from 68% to 58% in a nitrogen atmosphere and 24% in air atmosphere.     

Poly(1,3,4-oxadiazole-imide)s containing dimethylsilane groups

New poly(1,3,4-oxadiazole-imide)s containing dimethylsilane units have been prepared by solution polycondensation reaction of an aromatic dianhydride incorporating dimethylsilane group, namely bis(3,4-dicarboxyphenyl)dimethylsilane dianhydride, with different aromatic diamines having preformed 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2,5-bis[p-(3-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-fluorophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole, and 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. The polymers were easily soluble in polar organic solvents, such as N-methylpyrrolidinone, N,N-dimethylformamide, and pyridine, as well as in less polar organic solvents, such as tetrahydrofuran and chloroform. Very thin coatings deposited on silicon wafers exhibited smooth, pinhole-free surface in atomic force microscopy investigations. The polymers showed high thermal stability with decomposition temperature being above 415 °C.They exhibited a glass transition in the temperature range of 202-282 °C, with reasonable interval between glass transition and decomposition temperature. Solutions of the polymers in N,N-dimethylformamide exhibited fluorescence, having maximum emission wavelength in the range of 353-428 nm.     

Design of postmetallocene Schiff base-like catalytic systems for polymerization of olefins: XII. Synthesis of tetradentate bis-salicylaldehyde imine ligands

Reactions of salicylaldehyde, 3-tert-butylsalicylaldehyde, and 3,5-di-tert-butylsalicylaldehyde with 1,4-diaminobutane, 1,6-diaminohexane, 4,4′-diaminodiphenylmethane, 4,4′-diamino-3,3′,5,5′-tetramethyldiphenylmethane, 4,4′-diamino-5,5′-dicyclopentyl-3,3′-dimethyldiphenylmethane, 4,4′-diamino-5,5′-dicyclohexyl-3,3′-dimethyldiphenylmethane, bis(4-aminophenyl) sulfone, o,o′- and p,p′-diaminodiphenyl ethers, 1,4-bis(4-aminophenoxy)benzene, 2,2-bis[4-(4-aminophenoxy)phenyl]propane, and 4,4″-diamino-p-terphenyl gave a series of the corresponding Schiff bases which can be used as tetradentate ligands for the synthesis of titanium and zirconium complexes.     

Synthesis and properties of Ortho-linked aromatic polyamides based on 4,4′-(2,3-naphthalenedioxy) dibenzoic acid

A novel aromatic dicarboxylic acid monomer, 4,4′-(2,3-naphthalenedioxy)-dibenzoic acid ( 3 ), was prepared by the fluorodisplacement reaction of p-fluorobenzonitrile with 2,3-dihydroxynaphthalene in N,N-dimethylformamide (DMF) in the presence of potassium carbonate followed by alkaline hydrolysis of the intermediate dinitrile. A series of novel aromatic polyamides containing ortho-linked aromatic units in the main chain were synthesized by the direct polycondensation of diacid 3 and a variety of aromatic diamines using triphenyl phosphite and pyridine as condensing agents in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. The resulting polyamides had inherent viscosities higher than 0.74 and up to 2.10 dL/g. All of these polyamides were soluble in polar solvents, such as NMP, DMF, N,N-dimethylacetamide (DMAc), and dimethyl sulfoxide. Transparent, flexible, and tough films could be cast from their DMAc or NMP solutions. The solvent-cast films had high tensile strengths and moduli. Extensions to break were relatively low, except for the polymers derived from 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane and 3,4′-oxydianiline, which had elongations of 82 and 62%, respectively. Except for the polyamide based on p-phenylenediamine, all the other polyamides were amorphous in nature. All the polymers are thermally stable to temperatures in excess of 450°C in either air or nitrogen atmosphere. The polymers exhibited glass transition temperatures ranging from 183 to 260°C and decomposition temperatures (10% weight loss) ranging from 462–523°C in air and 468–530°C in nitrogen. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3385–3391, 1997     

Preparation and properties of aromatic polyimides from 2,2′-bis(p-aminophenoxy)biphenyl or 2,2′-bis)p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing a biphenyl-2,2′-diyl or 1,1′-binaphthyl-2,2′-diyl unit were prepared by a conventional two-step method starting from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides. The polyimides having inherent viscosities of 0.69–0.99 and 0.51–0.59 dL/g, respectively, were obtained. Some of these polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. Transparent, flexible, and pale yellow to brown films of these polymers could be cast from the DMAc or NMP polyamic acid solutions. These aromatic polyimides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 200–235 and 286–358°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and Properties of Novel Aromatic Polyamides from Diamines Containing 4,5-Imidazolediyl Structure

Novel aromatic polyamides were prepared from aromatic diamine containing 4,5-imidazolediyl unit, either by low temperature solution polycondensation or by direct polycondensation. Used diamines were 4,5-bis(4-aminophenyl)-2-phenylimidazole 1, 4,5-bis[4-(4-aminophenyl)]-2-(4-methylphenyl)imidazole 2 and 4,5-bis[4-(4-aminophenoxy)phenyl]-2-phenylimidazole 3. The obtained aromatic polyamides were produced with moderate to high inherent viscosity and soluble in polar aprotic solvents such as N,N-dimethylacetamide (DMAc), 1-methyl-2-pyrrolidone (NMP), N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Thermogravimetric analysis showed those polymers were stable up to 422°C in nitrogen atmosphere. The glass transition temperature (T _g)s of the polymers derived from diamine 3 were in the range between 243 and 275°C, and these values were approximately 120–160°C lower than those analogue polyamide I series containing no phenoxy units. The properties of polyamide I series are also compared with those of analogue polymers that order of aromatic nuclei and amide linkage is reversible.     

A new type of deoxygenation of quinoxaline N-oxides

The reaction of 6-chloro-2-[2-(p-chlorobenzylidene)-1-methylhydrazino]quinoxaline 4-oxide 3a or 2-[2-(p-bromobenzylidene)-1-methylhydrazino]-6-chloroquinoxaline 4-oxide 3b with dimethyl acetylenedicarboxylate under reflux in N,N-dimethylformamide resulted in deoxygenation to give 6-chloro-2-[2-(p-chlorobenzylidene)-1-methylhydrazino]quinoxaline 4a or 2-[2-(p-bromobenzilidene)-1-methylhydrazino]-6-chloroquinoxaline 4b , respectively, while the reaction of compound 3a or 3b with dimethyl acetylenedicarboxylate under reflux in dioxane precipitated dimethyl 8-chloro-4-[2-(p-chlorobenzyli-dene)-1-methylhydrazino]-3aH-isoxazolo[2,3-a]quinoxaline-2,3-dicarboxylate 6a or dimethyl 4-[2-(p-bromobenzylidene)-1-methylhydrazino]-8-chloro-3aH-isoxazolo[2,3-a]quinoxaline-2,3-dicarboxylate 6b , respectively. Further refluxing of compound 6a or 6b in N,N-dimethylformamide provided compound 4a or 4b , respectively.     

Synthesis of the Naphthalenone,Dihydroquinoline, and Dihydrofuran Derivatives

The reactions of enaminones with dimethyl diazomalonate were investigated in the presence of copper(II) acetylacetonate. From the reaction of (E)‐3‐[methyl(phenyl)amino]‐1‐phenylprop‐2‐en‐1‐one ( 6c ), dimethyl 2‐[methyl(phenyl)amino]‐4‐oxonaphthalene‐1,1‐(4H)‐dicarboxylate, was unexpectedly obtained as the major product. Quinoline derivatives were formed as the major products in the case of N‐methyl‐p‐anisidino and N‐methyl‐p‐toluidino enaminones. The reactions of acetyl enaminones were also realized, and quinoline derivatives were isolated as the major products. 3H‐ and 5H‐dihydrofurans were also formed as side products in these reactions. These results differ from those reported earlier on the reactions of tertiary enaminones with carbenes/metal carbenes.     

Synthesis and characterization of novel aromatic polyamides with polyalicyclic cardo groups

5,5-Bis[4-(4-carboxyphenoxy)phenyl]hexahydro-4,7-methanoindan ( 3a ) and 5,5-bis[4-(4-aminophenoxy)phenyl]hexahydro-4,7-methanoindan ( 3b ) were prepared in two main steps starting from the aromatic nucleophilic halogen-displacement of p-fluorobenzonitrile and p-chloronitrobenzene, respectively, with 5,5-bis(4-hydroxyphenyl)hexahydro-4,7-methanoindan in the presence of potassium carbonate in N,N-dimethylformamide (DMF). Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides having polyalicyclic cardo units were directly polycondensated from dicarboxylic acid 3a with various aromatic diamines, or from diamine 3b with various aromatic dicarboxylic acids in the N-methyl-2-pyrrolidone (NMP) solution containing dissolved calcium chloride. High molecular weight polyamides with inherent viscosities between 0.73 and 1.44 dL/g were obtained. All polymers were readily soluble in polar aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc) and afforded transparent, flexible, and tough films by solution casting. The glass-transition temperatures (T_g) of these aromatic polyamides were in the range of 219–253°C by DSC, and the 10% weight loss temperatures in nitrogen and air were above 467 and 465°C, respectively. A comparative study of some polyamides with an isomeric repeat unit is also presented. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4510–4520, 1999     

Synthesis of phenylated phthalimides. The diels-alder reaction of tetraphenylcyclopentadienone with maleimides

A series of phenylated dihydrophthalimides has been synthesized by the Diels-Alder reaction of tetraphenylcyclopentadienone with maleimide, N-phenylmaleimide, and N,N'-o-, -m-, and -p-phenylenedimaleimide. Subsequent dehydrogenation of these compounds yielded the corresponding phenylated phthalimides. These phthalimides were also obtained in one step when the initial reactions were carried out in refluxing nitrobenzene.     

Synthesis and characterization of fluorine-containing polyamides derived from 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane by direct polycondensation

A fluorine-containing diamine, 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane (BAPPH) ( II ), was synthesized in two steps on condensation of 2,2-bis(4-hydroxyphenyl)hexafluoropropane with p-chloronitrobenzene in the presence of potassium carbonate, giving 2,2-bis[4-(4-nitrophenoxy)phenyl]hexafluoropropane ( I ), followed by reduction with hydrazine monohydrate/Pd—C. Fluorine-containing polyamides and copolyamides having inherent viscosities 0.41–0.88 dL g⁻¹ were prepared by direct polycondensation of BAPPH with various aromatic diacids or with mixed diacids, by triphenyl phosphite and pyridine in N-methyl-2-pyrrolidinone (NMP). The polyamides were examined by elemental analysis, IR spectra, inherent viscosity, x-ray diffraction, solubility, DSC, and TGA. The diffractogram showed that the polyamides were crystalline except IVb , IVc , IVf , and Vc . Almost all polyamides were soluble in polar aprotic solvents. The polymers obtained from BAPPH lost no mass below 350°C, with 10% loss of mass being recorded above 467°C in nitrogen. These aromatic polyamides had glass transition temperatures in the 221–253°C range. © 1996 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Studies on metathetical and thermal polymerization of 5-norbornene 2,3-dicarboximide end-capped resins Pt-II

The article deals with synthesis, characterization, and polymerization of 5-norbornene-2,3-dicarboximide end-capped resins (bisnadimides) based on 4,4′-diaminodiphenylether, 1,4/1,3-bis(4′-aminophenoxy) benzene, 2,2′-bis[4-(4′-aminophenoxy)phenyl]propane, and bis[4-(4′-aminophenoxy)phenyl]sulphone. Both exo and endo bisnadimides were prepared by reacting the aromatic diamines with exo or endo nadic anhydride in glacial acetic acid at 120°C. The exo or endo bisnadimides could be distinguished on the basis of differences observed in IR or ¹H-NMR spectra. Both thermal (in solid state) and metathetical polymerization (using WCl₆/tetramethyltin catalyst and chlorobenzene solvent) of bisnadimides was carried out. Only exo bisnadimides could be polymerized using metathesis reaction whereas thermal polymerization of both endo and exo bisnadimide could be successfully carried out at 300°C in static air atmosphere. The polymers were highly crosslinked and insoluble in common organic solvents. The polymers obtained by metathesis polymerization were light brown in color whereas those obtained by thermal polymerization were dark brown in color. Thermal stability of the thermally polymerized exo or endo bisnadimides was comparable. These polymers were stable up to 400°C and decomposed in a single step above this temperature. The char yield at 800°C depended on the structure of the polymer and was in the 39–56% range. The polymers formed by metathesis polymerization showed a 1–3% weight loss in the temperature range 226–371°C and decomposed in a single step above 440°C. The char yields were higher in these polymers (53–71%) compared to those obtained by thermal polymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2323–2331, 1997     

4-(对取代苯基)-2-[2-(取代苯基)呋喃-4-甲酰胺]-1',3',4'-均三唑[1,2-d]-1,3,4-噻二唑类衍生物的合成和生物活性

以1-氨基-5-巯基-2-(对取代苯基)-1,3,4-均三唑和5-取代苯基-2-呋喃甲酰异硫氰酸酯为原料, 合成了10个未见文献报道的含苯环连呋喃的均三唑并噻二唑类衍生物, 通过元素分析, ¹H NMR, IR和MS确定化合物的结构, 初步生物活性测试表明标题化合物具有一定的除草活性.